Apple TV to Standard Def

Hey gang,
My workout room's got an old tv with standard def (Red, White, Yellow) and cable ports in the back and that's it. How do I hook the current gen ATV my wife just got me to that TV and have it look goodish?

There are hardware converters that will convert HDMI to various other types of output, however there are some issues with doing so that you should be aware of.
HDCP
HDCP compliant converters will not allow you to watch HDCP protected content such as that from the iTunes Store. Non compliant converters exist but we cannot discuss them under the Terms of Use for these communities.
Resolution and aspect ratio
I'm not aware of any converters that will scale the output from the Apple TV, any TV or projector which is used will need to be widescreen and support resolutions of 720p

Similar Messages

HT1577 how do a get a refund on a ridiculously slow downloading rented movie for my apple tv dispite a 5mb/sec down load speed? my first experience with appletv movie rental. no good. rented at 4:30pm. still waiting for standard def movie to finish at 8:1

how do a get a refund on a ridiculously slow downloading rented movie for my apple tv dispite a >5mb/sec down load speed? my first experience with appletv movie rental. no good. rented at 4:30pm. still waiting for standard def movie to finish at 8:10pm. Not good enough.

Thanks for the pointers folks. Yeah, 1.5GB is pretty poor isn't it? There are other suppliers, but you have to get a their phone line installed to access the internet so it's an £85 setup fee plus a day off work for a guy to come round and drill a hole in your wall before you even get to the monthly costs.
Don't get me wrong though - I'm certainly not an Apple basher, but am equally frustrated with both them and the ISP.
Virgin Media spend all kinds of money advertising their broadband as the fastest in the UK, but don't tell you (up front anyway) that you'll be cut off if you actually try and use it.
Apple on the other hand carry on with their 'it just works' mantra, but with Apple TV this only applies if you meet certain criteria (again, not mentioned up front).
I guess it aint a biggie, as i was gifted my Apple TV, and love all the other stuff it does, but from the number of posts on this forum can see that there's a lot of angry customers out there who want explanations as to why they're having similar problems to me.
Will be very interesting to see if Apple release any kind of software update that turns the flash drive from a buffer to permanent storage, to at least ease some of the pain...
Message was edited by: McGinty

Using Mac Mini with 16:9 CRT Standard Def TV by RCA connection!

Hello all,
I realise that there are others who have experienced similar problems but after spending quite a bit of time searching this forum, I wasn't able to find an answer for my particular circumstance. In summary, I can't get my new Mac mini to work with my TV at all. I need to figure out where the problem might lie. Please find the specifics of my setup below.
I have a 1.42GHz Mac Mini G4 with all the possible add-ons . It actually did not come out of the box for the first three months I owned it. I finally got it out this weekend and went to purchase a DVI-Video connector. I connected it to the TV by means of an RCA to Scart cable (which I know for a fact works fine with my Powerbook and iBook) and the TV just showed a blank screen (though there was a second or two of static each time I started up, as if settings were being re-adjusted). The TV only has Scart inputs so there RCA is going to have to be the connection method. The TV is a standard def Sanyo 16:9 CRT.
To make sure the mini was working, and enable VNC access (brand new mini so hadn't been set up at all), I took it to my office (I have no other monitors here) and connected it to a normal Dell LCD monitor. It worked fine, and I set up VNC access so now I can use my powerbook to control it headless.
I brought it back home and connected it to the TV again and VNCed to it expecting to find options to re-adjust resolution, refresh rate etc. All I found was 800x600 or 640x480 and I could not change the refresh rate at all. The TV is PAL but there was no mention of PAL or NTSC options. I took the opportunity to run software update and apply all the necessary updates as well.
After some initial research, I downloaded displayconfigx. It crashes every time I try to open it... so no luck there. Then I tried another application recommended on these fora whose name escapes me now (but it started with an s and also ended with an x) and to keep a long story short, I found it very confusing and wasn't able to find a setting that made things work.
The TV works fine as a secondary display for both my powerbook G4 and iBook G3. In fact, I'm using it with my powerbook now and my powerbook switches to the right settings as soon as I plug it in! However, my powerbook's place is in my lap and this Mac mini is sitting there unused when I really want to be using it as my media center and EyeTV box!
Please help me. Is this a problem with the DVI-Video adapter. Is this a problem with the mini? Should I call Apple Support (I don't have Applecare but it was purchased three months ago)? Please help me solve this problem!
Thanks,
Phaedon

Thank you very much for these helpful suggestions and questions!
I'm at work at the moment but I do remember the answers to most of these questions off the top of my head and will get the rest when I get home.
When everything is working fine for the PowerBook, the resolution list shows a variety of interlaced resolutions ranging from 680 x 480 to 1024 x 768. There are about five or six options. The refresh rate options are PAL 50Hz or NTSC 60Hz.
As for how it identifies the TV when connected, I have to admit I don't remember, but I believe it just identifies it as a generic TV.
The Mac mini doesn't identify it at all. I can confirm this because I tried booting it without the monitor attached and then attaching it and I also booted it with the monitor attached. In all cases, the same options for resolution were shown (1024 x 768 and 800 x 600) and refresh rate is geyed out. To me, this indicates that it is not communicating with the display at all.
I think that adapter may well be broken as it's never been tested with another display so this is the argument I'm going to make when I go back to the Apple Store this evening!
I'll keep you posted on whether the new one works or not.
Please do let me know if you think there are any other tests I should run or not.
Cheers,
Phaedon

Standard Def on High Def TV

Hello all
I work in standard def with the Sony DCR-SR80 (MPEG-2 format 16:9). I then convert in MPEG Streamclip. I use to export to DV format but more recently I'm exporting to "Apple DV/DVCPRO - NTSC" 720 x 480 (unscaled). My FCE Easy Set up is Format: DV/Panasonic DVCPRO Rate: 29.97 Use: DV-NTSC 32 khz Anamorphic. This is all nice because there really isn't any rendering going on. I film a lot of high school football so there is fast moving objects on the video.
My problem is that I create these projects and then burn them in iDVD and play them on my High Def Samsung TV (1080P) through my Blueray player (1080P) and the video has a jpeg look to it. I can make it better by adjusting my TV but I'm curious why it looks this way. Is it the camera? I nolonger have a tube television in the house so I can't compare. Any suggestions? whether a new camera or maybe new format and conversion settings. I tried to give as much detail as possible. I'm aware there are a lot of variables in there questions.
Thank you all in advance!!
Ween

Hi(Bonjour)!
That's normal as your base material is MPEG converted to DVCPRO. MPEG compression artifacts are transcoded to DVCPRO upon conversion with MPEG streamclip. MPEG format doesn't render rapid action like football very well.
Worst, you play a standard def DVD in a HD set. The image (and the MPEG artifact)is upscaled 6 times to fit the HD screen.
By the way you should choose a 48 khz audio preset as it's a standard in video edition.
Michel Boissonneault

HT201611 3mb speed and 15hrs to download iTunes standard def movie???

hey all,
we can watch neflix, stream movies, YouTube etc but a recent rental from iTunes of a standard def movie alternates between from 8 to 26hrs to download, movie is only 120mins long?
Anyone else have this really poor experience?

Hey vintageboho,
I see that you may be disappointed in your download times from the iTunes Store. Here is an article for you that should be able to help you address this:
For reference, here are some examples of download times for various media types. Your download times may vary. If you want to know your speed specifics, your Internet Service Provider (ISP) can help you determine your download speed, or you can use CNET's Bandwidth Meter.
iTunes Store: Download times will vary - Apple Support
https://support.apple.com/en-us/HT201587
Thanks for coming to the Apple Support Communities!
Regards,
Braden

HT3209 high def vs standard def

Just purchased a tv series in high def and it looks like it will take 11h per episode to download. Would standard def be much faster, and would it be likely that the folks at the itunes store would change this for me?

You will need to rencode the video to SD. (Use a 16:9 setting and then set the track to 16:9 letterbox and not pan & scan or pan & scan/letterbox)
Some menu assets may work backwards (you need to start a new project) but chances are you need to redo the menu
http://discussions.apple.com/thread.jspa?messageID=7661019&#7661019
http://discussions.apple.com/thread.jspa?messageID=7492165&#7492165
has some more info

What is the best compressor setting to use ... when exporting a 720p timeline from FCP for a project that will only be played back in a standard def monitor?

What is the best compressor setting to use for DVD StudioPro ... when exporting a 720p 30 timeline from FCP for a project that will only be viewed in a standard def monitor?

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

P2 standard def and Anamorphic Override

Hi,
Since 10.0.6 you can now work with P2 standard def anamorphic 16:9 footage in fcpx. Before that there was no way to tell fcpx that you where working with 16:9 footage and it would always show as 4:3. Now we have the Anamorphic override in the clip settings view.
But one issue I have with this is that it still shows the clips as 4:3 when I watch the clip from the Event Library. As soon as I insert the clip in a timeline it obeys the anamorphic override setting and displays correctly.
Am I doing something wrong?
This is not a huge issue, but rather annoying to have to look at all the clips with the wrong aspect ratio in the event library...
Thanks!

I don't have any files imported in fcpx from tape. The other DV MOV files I have tested(that works as they should) are either exported from Avid or from some unknown encoder at my tv network.
The only difference I can see in the QT inspector is that the MOV generated from the P2 MXF has format: 'dvcp' and the other files have format: DV - PAL. Both report 720x576 which is correct.
'dvcp' seems to be some kind of Apple DV according to this document.
I just don't see any other explanation to why these files obey the anamorphic override(widescreen or 4:3) in the timeline and not in the event library...
I can upload some examples of you would like to try it out.

HDV 1080i to Standard def DVD "Ken Stone" method- interlace problems, help!

Greetings,
I am on a tight deadline to produce a standard def DVD for an art exhibit, from HDV material that was imported and edited natively in FCP 7 as 1080i. I used the "Ken Stone" method of exporting the 10 minute sequence using QT conversion, as a pro res 422 HQ quicktime movie, then I took it into compressor 3.5 to make a Mpeg-2 file for a standard def DVD.
The problem is that the video that came out of compressor, when simulated in DVD SP 3.5 (and also when burned on DVD) has weird "interlaced" looking edges whenever there is movement in the video. It is a figure against a black background, and whenever the figure moves back and forth against the black background, the edges of the figure show interlaced-looking lines. The rest of the video where there is slow movement looks fine. BTW, motion was set to "Best" in compressor.
What am I doing wrong? was there something not mentioned in Stone's walk-thru, having to do with de-interlacing, or something I have missed? Is there a better way to produce a standard def DVD from HDV 1080i material?
Thank you so much for your help. I am down to the wire on this one...
AKJ

exporting the 10 minute sequence using QT conversion, as a pro res 422 HQ quicktime movie...
You are adding an unneeded compression cycle for a start. Export with QuickTime Conversion always recompresses your footage, even when you use the same settings as your Timeline.
Export to QuickTime with Current Settings, Self Contained will give you a Master file that is identical to what you edited.
weird "interlaced" looking edges whenever there is movement in the video...
If your source material is interlaced it will look odd on a computer monitor. It will display correctly on a TV set.
having to do with de-interlacing, or something I have missed?
Deinterlacing will throw away half of the vertical resolution. Bye bye HD. No good can come of that, right?
What is your intended delivery format? Does the method that you are currently using to view the material compare with how the end product will be seen?

Sound Cutting Out on Standard Def Channels with or wthout DVR

Hi!
We are having occasional sound drop-out problems. They seem to only be happening on standard def channels although we have a hi-def box. (We often record sitcoms and kids shows in standard def to save room on the DVR.)
The problem is that the sound cuts out for a fraction of a second (just long enough to notice) at random spots. If we rewind and play it back, it still drops out in the same spot so it seems the issue is with the signal getting to the box from the outside line, not an hdmi cable issue as I've seen mentioned elsewhere.
The issue occurs whether we're watching a previously recorded show or a "live" one (understanding that even the live shows are delayed a few seconds to enable the DVR to record it).
I've seen other sound issues related to switching channels but this is not the case here.
I've also had it happen on a small TV with no box. We just have the coax going right into the display to watch standard def network shows on it. This leads me to think it's a signal issue, not a DVR one.
Anyone else have this and/or have any luck in getting it resolved?
Thanks!
Jeff

Hello Jeff,
I am sorry to hear that you are having trouble with the sound on the Set Top Boxes. I sent you a private message to further assist you.
Thanks,
Shamika_Vz
Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

How to make standard def cable look better on hi-def tv?

I have a 24" Insignia LED TV model number NS-24E340A13. When I got it, I did not anticipate that my standard definition cable would not look very good on it. I have messed with the settings, but it doesn't look any better. Does anyone have any ideas?

Non-HD content should look fine on a 24" HDTV. I watch standard def on my 37" all the time, it's defnitely not as sharp as HD, but I don't have any complaints about it. Have you had any other devices hooked up to it? How do they look?
You have a digital camera? If so, take a picture and upload an image to somewhere like imgur.com, so we can check it out.

What adapter do I need to watch iPad mini with a standard def TV?

Besides another TV, what device could I get to watch the iPad mini on a standard def TV with RCA jacks?

http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
http://www.freemake.com/blog/connecting-your-ipad-to-your-tv/
 Cheers, Tom

Seasons pass TV show HD + Standard Def versions?

I recently purchased an HD seasons pass of the current AMC series "The Killing" It wants to download both the HD and standard definition versions of each episode. I placed all the standard def shows on hold in the download queue so that I'm only downloading the HD versions.
Is there a setting somewhere to indicate you only want the HD version or will it always download both HD and Standard def when you purchase HD programs. I'd prefer HD only since I'm under monthly data cap download limitations.
Thx marmot824

Ok, found similar discussions after posting that indicate this is normal and cannot be disabled. Consider the question answered.
marmot824

Hooking up a Cisco digital box to a standard Def. TV. How to

How to hookup a digital boc, Cisco 150N, to a standard def. TV

jjg111 wrote: How to hookup a digital boc, Cisco150N, to a standard def. TVIf the box doesn't have an RF out jack, use the Component or Composite video jacks along with left and right audio. If the TV doesn't have inputs for those, you'll need something that can convert the signals to channel 3 analog, like maybe an old VCR. Or change out the box for one that has an RF out connector. Or replace the TV.

Best application for Standard Def DVD creation?

I have a bunch of MiniDV tapes shot in standard def that I want to make into DVDs for my family. I want to preserve as much picture quality as possible during the process and will be using transitions, overlays, and credits.
I have used iMovie 08 and abandoned it because I needed dynamic chapter markers. I am now ready to edit the next DVD in the 'series', and with the advent of iMovie 09 and the availability of Final Cut Express at a reasonable price, I am trying to decide which way to go. I also have a copy of iMovie HD 6 which I used for my previous DVD.
From reading the reviews of iMovie 09 I am pretty confident that I would be happy with it functionally, but not if it costs me in picture quality. I noticed on my first effort using iMovie HD 6 and iDVD, that the DVD picture was not as sharp as the video viewed directly from the camera. Did I do something wrong, or is that a "feature" of iMovie? Would FCE be better?
My only concern with FCE apart from spending money that I may not need to spend, is the talk of a steep learning curve. With two little kids at home I don't have a lot of spare time. That said, I'd rather spend the time and get a sharp looking DVD than get a mediocre one quickly.
Thanks for any advice.
-John

skalicki` wrote:
What do you mean by "dynamic chapter markers"?
I meant the ability to define the precise location of the chapter within the movie, such that when exported to iDVD the menu allows you to jump to any point you have defined in the movie. By "dynamic" I mean they may be placed at random locations, rather than fixed intervals. iMovie 08 deleted the ability to add chapter markers, iDVD allows only fixed interval chapters (which seems useless to me), as does Toast. I tried the work-around of using Garage Band, but it fails on larger projects. I've read that iMovie 09 has restored the ability to add chapter markers where you want, but if I'm going to shell out more cash I might as well get the package that will get me the best picture too (within reason).
In any video application, for Chapter markers you simply place them in the application, then edit them in iDVD, DVD Studio Pro, etc.
Not in iMovie 08/iDVD, but now that you mention it, how does DVD Studio Pro compare to iDVD? I'm mostly focused on picture quality.
Do you mean better animated titles that you could use within the program? For this FCE is much better, because you don't need to work with the premade things, you can create and animate your own from the ground up.
That will be fun. Not what I was talking about, but a nice feature. I know that FCE will have lots of capability that iMovie doesn't (by design), that's just gravy.
I have used iMovie HD 6 to place chapters where I wanted them in my last DVD project, I didn't have much trouble working with it although it is a bit more "professional grade" than iMovie (I know, not saying much). How do the two compare for learning curve/user friendliness? I would like to say that I'd get a book to read on FCE but the truth is that on an average day I don't have time to watch the news let alone read a book.
In my opinion, FCE is definitely worth the investment and once you learn it you will never want to go back to iMovie!
Thanks, just the fact that the output is higher quality is a big pull for me. I think I'm going to take the plunge.
Now for the next question: FCE 4 or 3.5?
-John

Apple TV to Standard Def

Similar Messages

Maybe you are looking for