Apple tv turns off my router!
When I am trying to see a movie over airplay, the apple tv turns off my home wireless conection! Any sugestions?
Thanks!
Did you have any change before?
Well, you may try reset and restore (to factory setting + download latest firmware) your ATV. Of course, you need to reconfigure the box after it restarts.
Similar Messages
-
My Apple Tv turn off automaticaly... how to turn the apple tv?
My Apple Tv turn off automaticaly after up grade the version... how to turn on or restart the apple tv?
I think you are referring to "sleep". Apparently upgrade "knows better" what you want and overwrites your settings. This common with arrogant programmers who do not test their software properly.
If you ar referring to "sleep" then please go to Settings->General->Sleep After and change to "Never" or any number of hours available. -
i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?
Have you held the menu and left arrow together for 6 secs ? (I think you have from what you say).
Also try unpowering and restarting AppleTV.
AC -
I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.
What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in. -
Hi there
Since about a week my Apple TV turns off randomly. Just turns off and on, but of course you have to wait until turn on again and then pick up the show/movie were you left it. Very very annoying
Any one of you have experienced that problem?
I wonder if I have to re-set everything or change the device
Thanks in advance for your input guys
RDid you have any change before?
Well, you may try reset and restore (to factory setting + download latest firmware) your ATV. Of course, you need to reconfigure the box after it restarts. -
I recently bought a Samsung Galaxy s5 and cannot receive iMessages from iphones, I have deleted my apple id, turned off imessage, turned off spam messages on my android device, wasted 35 minutes on the phone to Apple's 'Support' has anyone got any tips?
Hi,
Do you mean you are not getting SMS text messages now ?
If so start here
Follow the Account management options until you are offered and email contact.
Explain the issue via email as only someone in Support can now remove your iPhone Number from iMessages if it has not "de-registered" itself correctly.
8:28 pm Wednesday; May 7, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
HT202157 Does Apple TV turn off automatically?
Does Apple TV turn off automatically?
It won't turn off, it will go to sleep after a certain time (this can be adjusted or turned off via settings) or manually (settings - sleep now)
-
Back to my Mac says UPnP or NAT-PMP turned off on router, but it's on!
Hi,
Back to my Mac in the iCloud pref pane says that UPnP or NAT-PMP is turned off on my 3rd party router. However, UPnP has been enabled on the router. Is this anything to be worried about? BTMM is working ok-ish, but I'm worried I still need to do something on the router as BTTM has this warning message showing up.
The router is a Huawei HG 523a firmware v1.2.
Apologies if this is the wrong forum. Let me know if so.
Thanks,
GAMAlso - is NAT-PMP available as a configuration option on non-Apple (airport) routers? I was reading something about BTMM by Glenn Fleishman (TidBits) & got the impression NAT-PMP was to be enabled on Apple routers & UPnP on non-Apple routers. Is this right?
In my router there is NAT Port Mapping, but is this the same thing as NAT-PMP? I must say, it's all a bit opaque... -
Ipod Touch shows apple then turns off
so here it is, my ipod touch died and so I tried to connect it to the computer Via USB. It showed the apple then shut off and it keeps doing it... It also doesn't show up in "my computer" and a device... Please someone help!!
Let me try to go into more detail.
My Touch is dead. When I turn it on it shows the "connect to charge" screen then turns off. I connect it to my computer and it shows the "thunder bolt" screen. The changes to the Apple as if its trying to turn on then instead of turning on, it shuts off and repeats...
It doesn't even show up as an external device. I tried all those things and didn't work... -
I have a macbook pro running 10.6.8. Since I got it over a year ago it will disconnect from the network when left idle and then not be able to reconnect. All computers in the house have to be shut down and the router turned off in order to reconnect again. My son just updated his macbook using my os disc and now his computer is doing the same thing. What can we do?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Also
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased. -
Apple TV3 turns off and on when using remote, already reset and restarted.
Apple TV just started acting up yesterday. When using remote, light on Apple TV would turn off and on so it would somewhat work when the light was on and would not when light when off. When light is off and in a menu selection, cursor would just move to the end of the list and stop. Already restored back to factory and reset it. Difficult to program after reset when remote only works part of the time when the light goes on so stuck in out of the box condition. Any help on this? Thanks!
Hello stiktani,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV remote issues:
Apple TV (2nd and 3rd generation): Resolve issues with Apple Remote
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Turn off recalculating route notifications or incr...
Ovi Maps often tells (in Dutch) that it is recalculating routes. This is on the highway. Especially when another highway is crossing mine (so when i drive under a bridge ... it thinks I am on the highway on the bridge instead of below it).
This is insane ... 'cause it is often telling me to turn around in the middle of the highway.
Precision and notifications should really be improved. Thank god for SygicHi there HPCustomer1562, welcome to the forums!
I saw your post about wanting to turn off the low ink notifications. I have a link I would like for you to see below that may help you. The post is from another user with the same question here in the community.
Re: How to disable ink level notifications
Happy Tuesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Why won't my Apple TV turn off (for long)
I turn off my apple tv's (one 720p and one 1080p, but at some point for an unknown reason they turn back on. The power lights seem to always be on . To the est of my knowledge I don't have any other remotes that control them.
Can someone tell me why this is happening and whether there is a solution. Will it hurt anything if I just forget about them and let them run, or should they be kept off when not in use?
Thank youThey turn back on (from sleeping) for brief periods to advertise their availability on the network - bonjour services. This then allows you to select them as a device even if they are sleeping... in which case they'll then wake up.
-
Does Apple TV turn off by itself?
How do you turn off Apple TV or does it turn off by itself?
You can put it to sleep by holding play/pause for a few seconds or settings-general-sleep now.
Regards -
ITunes Radio on Apple TV - turning off "are you still listening"
Hey all,
I had a question about something that's been annoying me. Is there a way to turn off the "Are you still listening" prompt in Apple TV for iTunes Radio? I sure hope so, anyone had any luck with this?Thank you for your reply, however, that wasn't what I needed a response for. I was wondering if there was a way to get rid of that prompt all together and just have iTunes Radio continue playing continuously until I ask it to stop. Its very inconvenient for me to have iTunes Radio stop every two hours, sometimes I'm not close to the computer, and it interrupts my workflow. Does anyone know if there is an answer to this question?
Maybe you are looking for
-
My Ipod touch wont allow me to get into itunes. So I downloaded some apps through istore onto the itunes on my computer, yet it still wont allow me to sync them to my ipod. It doesnt even give me the option to do so. The only things syncing to my ipo
-
FCKEditor implemented in Apex - save button doesn't save!
Hi there, I used the excellent notes on implementing FCKEditor into apex (see Re: textarea html editors and everything is working very well, however the FCKEditor Save button, whilst doing a submit is not saving the edited contents of the window. I'm
-
Not showing in iTunes / Safe Mode issues
Hi, sorry this is going to be long winded and confused! My (clueless) father has bought a Shuffle in the short term to use as a flash drive to rescue files from his PC that is about to die. I'm not on the spot and am trying to provide phone support b
-
Has anyone lost any of their info or ANYTHING while upgrading to Lion?
I'm really interested in upgrading, but im afraid to lose anything on my computer. i.e.: my music, documents, and pictures. I know they say to back up the computer, but i dont have the extra $70-$100 to spare and get a external hard drive. I also kno
-
QI06 - No suitable material/vendor combinations exist
Hello Craig, Could you please provide more details regarding this part: "is required by the control key"? Which setting in QM Control key means Quality Info Record is mandatory? I know that for 0000 it is not working, for 0001 it is - but what exactl