Apple TV via AirPort Express
Can I stream video to an Apple TV from iPhone 4 via an AirPort Express? All devices are hardwired using Ethernet to the same router. Wireless Airplay communication between iPhone and AirPort Express only. Router functionality in AirPort Express is not needed.
Regards
The router does provide WIFI, but the thing is the Apple TV will be out of reach. I want to avoid having two routers / networks. That's why Apple TV is hardwired. The AirPort (also hardwired) should only work as a receiver for the iPhone - streaming iPhone content to the Apple TV.
BOTH the Apple TV and the AirPort Express are AirPlay "speakers." That is, you can stream from iTunes to either device. You don't need both if the Apple TV is hardwired to an existing router. That provided the necessary networking for AirPlay to stream over. Wi-Fi is NOT required for AirPlay if you have a wired connection between the AirPlay "server" (i.e., iTunes host) and the AirPlay "speaker."
The Apple TV would work as a "receiver" for your iPhone.
If AirPlay is an application layer software, how may two AirPlay device communicate directly? Normally all communication is relayed by the access point.
AirPlay is a streaming protocol that runs over TCP/IP. AirPlay "speakers" DO NOT communicate with each other directly. The basic communication path is between an AirPlay "server" and an AirPlay "speaker" or multiple "speakers." Again the path between them can be either be wired or wireless or some combination of each.
Similar Messages
-
I have an apple tv, iPad 3 and airport express. Im at school and the apple tv is technically not supported by the network. Ive read that one could use AirPlay to apple tv via AE.
Can someone help me make this work? Step by step process if possible.
Thanks in advance,The router does provide WIFI, but the thing is the Apple TV will be out of reach. I want to avoid having two routers / networks. That's why Apple TV is hardwired. The AirPort (also hardwired) should only work as a receiver for the iPhone - streaming iPhone content to the Apple TV.
BOTH the Apple TV and the AirPort Express are AirPlay "speakers." That is, you can stream from iTunes to either device. You don't need both if the Apple TV is hardwired to an existing router. That provided the necessary networking for AirPlay to stream over. Wi-Fi is NOT required for AirPlay if you have a wired connection between the AirPlay "server" (i.e., iTunes host) and the AirPlay "speaker."
The Apple TV would work as a "receiver" for your iPhone.
If AirPlay is an application layer software, how may two AirPlay device communicate directly? Normally all communication is relayed by the access point.
AirPlay is a streaming protocol that runs over TCP/IP. AirPlay "speakers" DO NOT communicate with each other directly. The basic communication path is between an AirPlay "server" and an AirPlay "speaker" or multiple "speakers." Again the path between them can be either be wired or wireless or some combination of each. -
trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple (although it says that the software is available from Apple)
Rfh723-
You are technically way ahead of me, so I can't argue with what you did.
How about an even simpler WiFi network consisting of only the AirPort connected by an Ethernet cable to the printer? If the iPad still can't find the printer when connected to this network, then something is broken!
(Also try a different Ethernet cable.)
Fred -
When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.
Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine -
Can we print with a non-wifi printer via Airport Express?
Is it possible to print with non-wifi printer via Airport Express?
Read through this previous thread for answers: https://discussions.apple.com/message/21994667#21994667
-
Can I send the radio/music from Apple TV to AirPort Express?
I am considering purchasing an Airport Express to send music from my Apple TV to another stereo in the house. Is this possible or does it only work with iTunes from my iMac?
Sorry, but the Apple TV is not an iTunes server. Media on the second generation Apple TV is streamed from the Internet or from a local iTunes server. In turn, the Apple TV can then send these streams out of either its HMDI or optical digital port ... but not out via wireless to another Apple TV or AirPort Express Base Station.
-
HT3669 Failed printer setup, bonjour via airport express on 10.8.3, unable to download drivers?
Trying to install a Samsung SCX-4500 printer over bonjour via airport express. My Mountain Lion machine sees the printer and I've manually installed the latest Samsung drivers, it says it can't find the software on Apple's servers. I just downloaded the latest drivers from Samsung directly, it did not resolve the problem.
I am unable to select printer drivers manually for the 4500; even if I manually select the 4500W drivers it still attempts to download software (unsuccessfully). It works perfectly on 2 Lion machines and a PC, unsure what the deal is.
I'm having trouble even getting the post message' button to work now, it isn't my day...Link to Apple supplied print drivers:
Samsung Print Drivers
You can also try resetting the print system:
Reset Printing System -
Printer Spooling via Airport Express...
My G4 is connected via Airport Express to a printer. It has worked fine, in the past, but now when trying to print, it appears to connect but then a message reads, "spooling" and hangs without ever printing. What should I do to correct this, please?
Have you tried posting this in the "Airport Express" Category of the Forum?
If not, I'd suggest that as you may get more help there.
http://discussions.apple.com/forum.jspa?forumID=1011 -
Connect Imac to Stereo via Headphone Jack & 2nd Stereo via Airport Express
I have two whole-house stereo systems; one serving the lower level (basement) of my house and another serving the first and second floors. My iMac is on the lower level. The house was prewired with two coax cables (standard cable TV-type cables) from the area behind my stereo on the lower level to the room where my iMac is located. Using adapters from Radio Shack, I was able to directly connect my iMac to my home stereo on the lower level. I can currently play my iTunes on my lower level stereo by plugging the cable into the headphone jack on my iMac.
I am set up with a wireless network using a Linksys WRT54G. I would like to be able to also stream music from iTunes on my iMac to my home stereo on the first floor. I realize I can do this with the use of Airport Express.
My goal is to be able to play the same music from iTunes on my iMac on both stereos simultaneously. My question is; if I have my lower level stereo connected to my iMac via the headphone jack, will I still be able to stream the same music from iTunes to my upper level stereo via Airport Express? I'm concerned that by connecting the lower level stereo to the headphone jack, the music will not be able to be streamed wirelessly to the upper level stereo.
Thank you in advance for your time.
iMac 24 in. Mac OS X (10.4.8) Wireless keyboard & mouse, Linksys WRT-54G connected wirelesslyHi.
Assuming your iMac is no more than 50 feet from where you intend to locate the express then:
You will need to configure your airport express to join your current wireless network in client mode (otherwise you won't be able to use the internet and the express at the same time).
http://docs.info.apple.com/article.html?artnum=302153
In iTunes there is an option to select multiple speakers. Thus you select this and then check the desired options. Hence you can have music coming out of the speakers/hadphone jack on your iMac AND out of the speakers connected to the airport express. -
Epson Aculaser CX11NF printing via Airport Express
Well today has been an interesting day...
Connected printer to airport express usb port - had problems printing via this in the past but since I'd moved the printer so I could plug it into the usb port on a computer and then share it that way I thought I'd give it another go.
Macbook 10.5.2 prints perfectly first time
Powerbook 10.4.11 can see it and connect but won't print
Toshiba XP laptop) can't see it
Check out the net, try out the info I find and hey presto! Toshiba XP laptop sees and prints perfectly
Share printer via Markbook and Markintosh and Powerbook prints fine but still won't print directly via airport express.
Feels wrong that an xp book can print via an apple airport express easier than an apple laptop...
Anyone have any thoughts?Hi,
Thanks for all your replies. I tried repairs pewrmissions in disk utility again and got slightly excited when printer utility automatically selected a generic post script driver but my printer just printed jibberish.
I've just run repair permission in pinter setup repair and this is my log:
The file /System/Library/StartupItems/PrintingServices/PrintingServices is missing!
The file /private/etc/cups/classes.conf is missing. This file is deleted when using the Reset Printing System option.
The file /private/etc/cups/ppds.dat is missing. This file is deleted when using the Reset Printing System option.
The permissions for the file /usr/libexec/cups/filter/rastertodymo are incorrect!
They are lrwxr-xr-x, but should be -rwxr-xr-x
Repaired.
Recreating symbolic links...
Done.
Verification complete.
2075 files examined. 1 problem was found and repaired. It is recommended that you verify the permissions again to make sure the values are correct.
3 missing files/directories found during the verification process. They may be responsible for certain printing problems. Printer Setup Repair cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
Does it mean anything to anyone? -
Share printer with Windows 7 via Airport Express?
I would like to share a printer with a Windows 7 Laptop via airport express. The Windows 7 Pc does not detect the printer whereas printing from the Macbook Pro works fine. Any ideas?
Hi, I was searching for the same (my colleague has a windows PC; everyone else here has mac). I have not tested this, since I am working on mac, but it seems like you need to install "Bonjour" for windows.
http://support.apple.com/kb/ht2586
Hope this helps (though it's a bit late)
/W -
HP printer not printing via Airport Express
I have a HP DeskJet D2330 printer that I am trying to use via Airport Express. The issue is that while the printer is detected in the Airport Utility, and is detected in System Preferences as a Bonjour printer, I can't print to it. Documents sent to the printer appear in the queue and then disappear but no pages come out of the printer.
Hi - similar problem. Mine talked a little (test page would print about ~1 inch then grind to halt). No luck with escalated apple network tech. Problem (apple sez) is with HP. HP is quiet but has list of printers "likely" to work with Airport Extreme , but dated (indicates rendezvous with extreme vice bonjour). FYI, my printer works fine when USB direct to mac. Also Works fine from Mac or PC as ethernet-connected printer on home network (with Linksys/N Giga router) as network printer (also sets up as "bonjour" printer for what that is worth). Also problem exists with imac connected to Airport extreme via wireless or wired. So...problem seems to be pretty specific to talking via airport extreme USB. Havent tried to use ethernet yet, but need the slot for other equip.
Anyone else having any luck?
Also anyone have proven good printer hookup? I need photo quality printer.
mpw -
Unable to print to my Oki C3200 via Airport Express
Hi
I wish to print wirelessly via Airport Express using my Oki C3200 printer. I have followed all the recommended install procedures.
I am using a Windows Vista Home Premium 32 bit PC, have configured the printer with Bonjour for Windows, and still cannot print.
The printer works fine if connected by USB direct to the PC.
Any help appreciated.Yes, my iMac is hooked to my Airport Extreme through it's ethernet port.
No, I don't have AIM. -
Hi there!
I am trying to play music from my Mac on multiple speakers, Apple TV and AirPort Express. But as soon as the AirPort Express station is plugged in, the Apple TV does not show up in iTunes anymore. When trying the same using iPhones Remote app it works perfectly.
Does anyone of you have an idea why iTunes does not show me both Apple TV AND AirPort Express? (it has nothing to to with the IP adress as the adresses are different).
Thanks for any help!As my english isn't too good I made a screenshot to show you what I mean.
As you can see in the image below iTunes only shows me the computer speakers and the AirPort Express. But at the bottom you can see that iTunes actually recognized 3 different speaker (Mac, AirPort, Apple TV 2). Why does the Apple TV not show up in the multiple speakers window? Any ideas? -
Best way to extend wireless via airport express and time capsule
best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank youWhat you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps.
Maybe you are looking for
-
Move files and library to external hard drive
-
Where is the syntax error in my Insert statement?
It says that there is a syntax error in my insert statement, pointing to the .ExecuteNonQuery() at the end: 'Defining the activity ID from the datatable Dim ActivityID As Integer = DataTableActivities.Rows(0).Item(0) 'Defining the calories from the d
-
How to move a file when startup disk is full?
My macbook start up disk is full, apparently. I've tried deleting things and nothing has worked. I need to safely get a video file, in mp4 from Iphoto onto a usb drive. Iphoto will not let me put the file on desktop or move anywhere. What do I do? He
-
I would like to ask some concept in JSP Is that the variable declare in the <% %> is global variable or instance variable? If two client access the same JSP at the same time, and there is a variable x=0; And then this JSP perform x++ and display x. T
-
Clean Install / Time Machine Restore
If I do a clean install of Snow Leopard and then use migration assistant to migrate my user profile, applications, settings, etc. from the time machine backup that was created under my 10.5.8 installation - is the migration assistant going to carry o