Apple TV video streaming issue with EA4500

I am facing issues with my router EA4500 and my apple TV. When I am watching a video from my itunes library at my PC, sometimes stop palying waiting to receive data. Is that a way to conect my apple tv to my router to prioritize this video streaming from my PC to apple TV? Can someone help me? Do you have the port list for Apple TV?

I'm sorry if I confused you! Regarding the firmware version you currently have (2.0.37.131047) it shows that you are using the Classic firmware in which we would suggest that you upgrade it using the Linksys Smart Wi-Fi Firmware. This Linksys Smart Wifi uses the latest firmware for your router that might help you fixed your problem. Click this link below where you can download the new firmware for yor
router. http://homesupport.cisco.com/en-us/support/routers/EA4500----Can you tell me what version of apple tv you have? If your Apple Tv happens to be dual band then I would suggest that you connect to the 5ghz network because it can give you better video streaming capability. Yes you can choose which device you want to connect to the 2.4 or 5 ghz as long that device/s is dual band.

Similar Messages

Video Streaming Issue with Rolling Audio

I have several flash based lessons that I have created that are being distributed online to several companies.
Each lesson has a video that is played within the lesson through the flvplayback control. The videos were supplied by a third party and some of the videos are encoded at 384K and some are at 568K.
One company that is attempting to view the lessons is seeing the following behavior. The video plays for approximately 20 seconds then suddenly the video drops out and the audio continues to play. With the audio still playing the video scrubber rolls back and attempts to start the video again but all that comes through is the audio track again. Now there are 2 instances of the audio playing with no video. This happens a third time and finally keeps going until all the audio is played out.
The IT staff at the company has showed me a fiddler log that shows the flash player making a connection out to Akamai to retrieve the video and then rolling from port 80 to port 1935 and finally to port 443. This would explain the three audio tracks playing
I have read that the flash player will attempt to gather the stream from the stated rtmp location and then if it encounters an issue with a proxy or firewall it will attempt the other ports.
So I am not sure if there is anything I can do by design or programatically to alleviate this issue. It appears to me that the company attempting to view this video has some kind of bandwidth throttling program in place that is kicking off this behavior in the flash player.
Is it possible to prevent the flash player from making the three attempts? Would a sudden cut of bandwidth prompt the player to attempt to roll to another port if a network load balancing program suddenly kicked in? If it is bandwidth is that why the audio stream continues to play because there is enough bandwidth for the audio track to get through, but not the video?
I have attached a screen shot of the sniffer output so you can see the rolling ports thing.

As it turns out they do not allow traffic over the default rtmp ports. They do have a proxy server in place, but it does allow http tunneling. I had one of the users on their network hit the port testing page that adobe provides and hit laptop passed the test by allowing tunneling.
Incidentally it can be found here if you need it: http://kb2.adobe.com/cps/164/tn_16466.html
I created a flash movie that had the flvplayback component in it streaming from one of the flv files I have on Akamai and it worked for the end user.
This was a little depressing because I was hoping I could simply blame his network and walk away .
I then changed the component in my lesson to specifically use tunneling and this worked for the end user with the video issue, but then caused issues for all the other companies viewing the lessons.
I believe they are using FP version 9.0.124.0 at this particular company and not unlike most places I have dealt with they tell me it is impossible to upgrade to FP10.
So I think what is happening is the scorm communications and the web service communications and the video and the load balancing software and the client side proxy server are all coming together to cause the issue.
It seems to me that it isn't an issue I can solve via changing publish settings or programmatically although I have been looking at the proxyType property of the NCManager for the flvplayback control to see if setting the fallback to CONNECT might solve the issue.

Video streaming issue with WiFi

Video streaming never works for the second time when WiFi is on & connected. Says "Wireless network has been disconnected. Please try again.", though it is connected well and browser works fine.
I need to do battery pull-out everytime. I'm trying to stream youtube video contents.

Yes, it does play all youtube videos but low bandwidth ones (suitable for mobile devices)

Video streaming issues with macbook pro

This is driving me crazy. When attempting to stream video, eg from youtube or netflix etc, the video will go along fine for some random amount of time and then start skipping and stuttering, both the sound and the picture. This can be cured at first by pausing and playing the video but eventually the audio gets a loud buzz and the only thing that fixes this is a restart. it's gotten to the point that I would have to restart 6 or 7 times to watch a movie. I noticed that when the audio gets to this quality that it effects all audio for the computer - alerts, itunes, everything. I don't think it's related to connection speed as I am on a T1 line and downloads are fast. Also - I have been getting more frequent kernel panics lately (about once a month). Any help? Thanks!

For example:
According to this: http://www.cable-modem.net/broadbandarticles/comcastspeed.html T1 service providers offer 1.544 Mbps download and upload speeds and Comcast has long offered high-speed broadband connections with 6 Mbps download and 1 Mbps upload speeds; but with the advent of DOCSIS 3.0 technology, Comcast cable modems can now access the Internet at wideband speeds as high as 50 Mbps at affordable prices.
You can see, download speed is not a big advantage of a T1 line.

Video Streaming Issues with FIOS

I have multiple ways of streaming to my TV.
From my Computer:
Verizon Media Manager
Windows Media Center
TVersity
Through these devices
Verizon Media Manager
X-Box 360 Media Center
X-Box 360 Video
LG BD350 Blu Ray Player
When I first had Fios installed, I was able to stream perfectly from my computer through every combination above.
Note: Streaming through Media Manager was the easiest, but with significantly less audio and video quality.
A few months ago everything stopped working.
Streaming through Media Manager became scattered
I was unable to connect my X-Box Media Center to my computer. A few times that it did connect there was a 15 second lag after I press a button before it responds. It also was unable to stream videos
Both my X-Box 360 and LG Blu Ray streaming stops and starts uncontrollably.
I had a service person come out and he reconnected my router wtih both the Coax and Ethernet, and for a while, everything worked as before..
Then suddenly a month ago, everything went bad again with the same symptoms I described above.
Verizon came out and replace my box, and again it started to work again.
Then the power in my house went out for a few minutes. When everything powered back on, everything stopped working again.
As of now, i am still unable to stream videos
My attempts to troubleshoot:
I swapped out several powerful computers, each with the same symptoms.
Turned off the firewall on the PC and Modem
Rebooted the modem
My speed test showed 35.89/2.00mps
Any ideas?

verizon does not care!! after an incredible amount of calls to customer service and getting cut off or switched from one idiot to another and getting the same suggestions, "reboot, unplug, shutdown", etc. we've all heard these. service calls that take no less than a week to have them come and then they replace everything, again, 3 times so far since getting fios and 4th coming wed this week, yes, without service for the holiday!! my suggestion is to get rid of fios and go back to cable. the customer service cable companies offer alone is more than reason enough. verizon customer service does not exist, it sucks!! and they do not care!!!$$$$

Video Streaming Issues in Mountain Lion

Since upgrading to Mountain Lion, I have been experiencing problems streaming video files to my Sony Bravia TV. Although I have seen other posts complaining about audio streaming, streaming via wifi, etc. I haven't seen any posts with exactly the same setup as mine.
I have a mid-2007 iMac and I have iSedora, a DLNA media server, installed and streams video over a LAN. My TV is connected using a Powerline setup, so that there are no issues with WiFi. With Mountain Lion, I have been experiencing stuttering video (and audio) when I watch film and TV video files which are located on my iMac. I have to keep pausing the stream to allow it to 'catch up'. Basic animation video is okay.
Initially, I thought that my iMac was 'too old', but it is able to cope with any transcoding as the CPU is not overwhelmed at all.
I have tried Serviio, but that also has the same problem, and as I have a NAS, I can also stream the same 'problematic' video files without any problems.
I only hope Apple can sort this 'bug' out, which seems to be limiting the output of the stream somehow, or I am seriously thinking about downgrading back to Lion, even though I like everything else about ML.
I haven't seen any workarounds, but would be willing to
Paul

since upgrading from Lion to Mountain Lion I am also experiencing strange text issues to the point that my 27" i5 iMac is unusable for any application requiring text input. Because of this problem I am doing most of my work these days on my iPad.
Basically what happens is that I will be typing text when suddenly the cursor will leap to another part of the preceding text and insert itself. If I don't catch this immediately any typing I do overwrites the text after the new re-insertion point. Other times the text will suddenly start scrolling or a section will select all by itself and then delete. This is happening with pretty much every application that has text capabiity.
My iMac has 12 GB of RAM. So that is not the problem. And I seem to be clean from malware. The problem started as soon as I upgraded to Mountain Lion. My 27" iMac which is my main computer is now for all intents and purposes useless. Every day I pray for OS updates. But so far nothing.

Video streaming issue on my phone

I have Nokia E71, when I play a youtube video the streaming is not smooth, in other words i have to face many pauses to view a video of five mins. My brother has nokia 6300, he plays those videos absolutely flawlessly. We both having same network, living at the same place. What is the issue with my nokia E71?

Fee?
There is no teleohone support for itunes
Click Contact Us at the bottom of this page, then click Contact Itunes Support

Apple 27'' Cinema display issue with nvidia quadro 1800 - Win 7 64bit

Hello,
I'm trying to help out a buddy of mine with his cinema monitor.
He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
What am I missing?
Thanks!

Hello,
I'm trying to help out a buddy of mine with his cinema monitor.
He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
What am I missing?
Thanks!

Video export issues with 5D mk II video

Using a trial version I keep running into issues with video slideshow export.
I have some 1080p '24fps' video clips from the 5D II, added them to a new Slideshow, did a Custom Export to h264 with height 720 (which from memory took the width to 1152) and 24fps - I want this to play on AppleTV, but the resulting video starts ok, but has multiple sections of blank video - in QT the frame rate has also been upped to 36fps!
It also takes a ridiculous amount of time to export a short clip, but that's seems par for the course for many of Apple's apps. This is on a 2008 8x3GHz Mac Pro with plenty of RAM, though running Leopard.
Anyone done any A/Bs of performance in Leopard vs Snow Leopard - does it make better usage of multiple cores? (They all have a little activity but it's 10% or so, perhaps 1 core at 70-80%, I can't understand even if it's not using all fully why one isn't getting maxed out with the conversion process).
The slideshow export function seems incredibly buggy - it used to output using AppleTv preset with incompatible frame rates, though they may have fixed that.
Message was edited by: Alley_Cat

DLScreative wrote:
Just a thought, but 24p was just added to the markII through a firmware update.
Yes, which is why I thought it would be great for AppleTV which can only officially support 720p at 24fps (though 25fps will often work).
If I use an AppleTv preset it will now rescale to 960x540, but I want to use 1280x720.
Previously in 3.0 the AppleTV preset output 720p but at 30fps which is too high for AppleTV.
Are you sure it's not the footage? Have you tried it in FCP? Also, it maybe that 24p isn't supported in A3, but this all just conjecture on my part.
Good thought, but I would imagine QT is the engine supporting the Aperture exports, and if parameters are set correctly it should give the appropriate output.
I'll try using QT Pro and see what that does with a clip.

Video display issues with Mac Pro and GeForce 7300?

I'm just wondering whether anyone else has experienced any video strangeness with their Mac Pros with GeForce 7300 cards? Basically, twice now I've had the mouse cursor stop responding and the entire screen turn black, then a second later everything's back to normal (with the cursor moving and the display back). I seem to recall a similar issue on my Windows PC with a Quadro FX 1100 card, so I'm hoping it's just a video driver issue.
Bryan

I am not sure if its the monitor, the MP, or the video card, but, I have had my computer completely replaced after reporting to my local Apple Store about my G5 fans over heating and my monitor either not being able to wake or refusing to sleep. I called AppleCare and did all the normal trouble shooting but they said take it in to store. But now that I have a brand new MP 3.0 I am getting the same issue but no fan noise. I have a 23Cinima HD (the strore said it was fine when they had both my computer and monitor in) but last night after hours of inactivity the monitor had the screen saver on but didn't got to sleep. I then put in to sleep but when I got up this morning I couldn't wake it up. When I got my new computer (3 days ago) I didn't migraite any of my old stuff. I have been slowly reinstalling all my software and updated anything before I install anything else as an added attempt to not have any bad files. I have 2 gig of ram and 500 hd with the 7300 card. I am at a lost I checked and rechecked all my setting. The only other thing I have connected is my airport extreme base.
Any idea's anyone?
Ops one last issue, I have blown my apartment circut breaker three time while attempting to start the new PM and once it did it when I was trying to wake it just by tapping the space bar. Is it the computer being more power hunger?
Mac OS X (10.4.8)

Video Playback ISSUE WITH VISTA!!!! NEEDED HELP BADLY!!!!!!!

I am using a Dell XPS GEN 5 PC with Windows Vista Premium Edition as the current OS installed. I have latested up date for Itunes and QuickTime (7.1.6) Installed. I have recently bought and downloaded 3 of the Original Star Trek Tv Shows from Itunes. When I try and play one of them, they don't work. The Screen comes up, the show starts, then stops. Sometimes the sound keeps on playing, and then stops. Sometimes it just dosent even come on. I'm guessing (as a highly advanced Windows PC User) That this ia a "video/playback issue, related to a Apple/Vista Compatibility problem. I would like help solving this problem.
-Nick.

Do you have a SATA hard drive? I have the same problem you describe when trying to play videos in iTunes. Do the previews of music videos on the iTunes web site play OK? If they do you probably have the same problem with SATA HD and iTunes incompatibility. Not sure who is going to fix that problem and when. I have found one fix that worked for me. Copy your video(s) to a flash drive and then play them from there. It's a workaround and you shouldn't have to do it but it does allow you to watch the videos.

Further Apple TV / Photo Streaming Issues..?

Hi Folks
I seem to have had ongoing issues with my Apple TV since the day I got it, but have just kind of soldiered on and ignored them. From a quick perusal of these forums it seems like others have experienced similar problems, but I've yet to find a resolution.
Whilst I can view selected libraries streamed to the Apple TV from my iMac, it's always been hit-and-miss as to whether they will appear as part of the screensaver. On the odd occasion that the DID appear it was almost always as a simple slideshow. Once or twice they appeared as Floating Pictures (which is my preference) but I've never been able to DELIBERATELY set this up; it's always been a fluke and I've never known how I've activated it. Oddly, the Apple TV has never – until now – had a problem with displaying Album Art as Floating Pictures.
However, now I don't seem to be able to view anything as a screensaver apart from the default Apple Photos, and that includes Album Art.
Whilst it's nice to look at random pictures of flowers and the like, it's not really what I want...
I did wonder whether by simply copying the desired photos and/or albums directly to the Apple TV I could get around the problem, but I don't seem to have that option in iTunes, despite what iTunes Help tells me.
I'm beginning to get a bit despondent about this now (although it could be the effects of yesterday's festivities..!) and would really appreciate any help, tips or suggestions.
Cheers!

The selection for sync/stream library is done in iTunes.
Changing the sync library will delete content already on AppleTV giving a clean slate for a new sync.
You may need to remove the current streaming option in iTunes - right click on AppleTV and choose Turn Off Streaming.
Now check AppleTV Settings>Computers.
The top entry is usually the sync computer, if greyed out it isn't set up or avaialble.
If the stream iTunes library is still listed highlight it and remove it via AppleTV.
Then go to the top and choose to add the library as a sync library. You'll need to enter a 5 digit code in iTunes again - this library will automatically sync stuff, so you may want to select custom sync to narrow down what you want to copy over.
Stuff not synced will also stream from this library when iTunes is running.

Apple TV Buffering/Streaming Issues

First off, I have multiple Apple TV devices in my home. Over the past week, I have been having buffering issues on movies and TV shows purchased. Everything is hard wired ethernet. In addition, I have download speeds of 42MBS. It's only on Apple TV that I have the issues. I have tried the same movies on all devices. Anyone else having this issue?

I too am having issues with ATV after moving to MacOS 10.10
Here are some things I have noticed.
When ATV is sharing from an iTunes computer, streaming buffer will end shortly after
screen saver activates
or the screen goes to sleep
or if the iTunes window is not the front window
or the iTunes window is collapsed
The work around is to disable screen saver and any sleep modes, have the iTunes window active, and don't use the mac for anything else.
When streaming from the Mac to the ATV, music and movies will also have many start and stops too them.
My conclusion is that using a ATV may not be the best choice for music or movie playback. Good thing I have my DVD player

Live Stream Issues with FP 11.2

We're seeing lots of bugs within the NetStream when connecting live streams and publishing/playing the stream via direct peer connections.
Specifically when attaching a new Camera the receiving peer can no longer see the video stream. Also when toggling publish(bull) publish(streamName) from the publisher side and similarly toggling play(null) and play(streamName) from the subscriber side the streams don't play (render video) anymore even though i can see through the netwrok that the bytes are coming through.
Along with this we seem to be getting new kinds of NetStatus errors ever since we started testing - "NetConnection.Call.BadVersion" was one we've seen but can't make any sense out of given we're using DIRECT peer to peer connections for the netstream classes.
Lastly on general we're seeing lots of instability issues with on the h264settings applied to the nestream is this still in BETA? Instibility = crashing browser mostly when showing multiple video such as in a group video chat.
Are any of you seeing this as well?

Hi Damorgan,
As you suggested, I did fresh 11.2.0.2 installation and find the mentioned components are valid from v$registry.
Only desupported component is UltraSearch that I was asked to remove during upgrade and I did so.
COMP_NAME VERSION STATUS
OLAP Catalog 11.2.0.2.0 VALID
Spatia 11.2.0.2.0 VALID
OLAP Analytic Workspace 11.2.0.2.0 VALID
Also the metalink note: ID 270588.1 indicates that mentioned components exists for 11gR2.
DBUA was asking to install these component prior upgrading. My first note has that DBUA instruction.
Is there any way to select mentioned components with "software only" installation prior upgrading?
Thanks.

Connection issues with EA4500

I had bad connection issues with my mobile device, so i pressed reset on my EA4500 router, and now when i connect to my network, it gives my limited connection even though i have 5 bars of signal. Not sure what to do now...

Resetting the router will erase all the settings you configured on the router since the initial setup. You manually configure the router's wireless settings so your wireless devices can have internet access again.
Procedure: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cfb50c0dc992443ab2405a782cca60f7_19073.xml&pid=80&...
Make sure to use a computer that is hardwired via Ethernet cable to the router.
For bad connection issues: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cf6ed888ce144d06905af4987887fd1b_KBxxxx_EN_v1.xml&...

Apple TV video streaming issue with EA4500

Similar Messages

Maybe you are looking for