Apple tv will only let me go to diagnostics page and wont start
Please help. My appletv constantly turns on and goes to the language and resolution settings (and asks me to restore or run diag or restart).. running diagnostics says it is fine.. and it won't let me restore (says it is unable to do a restore and back to same page). if i restart, same issue..
UGGH.. Here is a tip. I did change my router and had set up apple tv for static IP address. I don't recall what it is, so perhaps it is trying to find that IP address and my router assigns dns.. i have no idea how to go and try to change the network settings or anything else, other than the looped pages i get.. spending HOURS.. uggh again i tried unplugging my ethernet, the router, etc. not sure if there is a trick to get to that page. I feel if it isnt some other issue then all i need to do is even let it use the wireless connection or change my network settings. anyone?
Hi. I am afraid I did. In fact after setting up the new router (well old one factory restored) and having many fast power outages (I kept turning off av room power while trying to reboot another component) I went into iTunes and atv showed but wouldn't sync. That is an age old issue. I couldn't do my normal trick to get it to sync. When rebooted pc apple tv wouldn't show so I decided to delete it. Had to delete it indeed from the pref pain in iTunes. When I went to tv to have it connect to iTunes and start all over I saw it was in recovery mode...perhaps for hours. I have no hdmi and tried rebooting it with and without Ethernet. Possible the power stops corrupted HD? If so not sure why diagnostics say all works well. Any ideas,
Similar Messages
-
I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?
The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
10.8 Mountain Lion is a download from the App Store, the price is $19.99.
Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
i am trying to purchase many songs at one time. i have added all songs to wish list , now to purchase it will only let me do one at a time please advise how i can purchase more than one at a time
There used to be a 'buy all' button on the wish list screen but for some reason that has been removed from the current version of iTunes so you will need to buy each item individually. You can try leaving feedback for Apple and maybe it'll be added back in a future update : http://www.apple.com/feedback/itunesapp.html
-
Just upgraded to Lion from Snow Leopard. Now my CS3 Creative Suite programs will only let me open one picture per session. I then have to completely close out of photoshop or illustrator or whatever and reopen to open another picture. Any suggestions before I have to take my computer to the apple store.
http://roaringapps.com/ show some people having problems with various things. Have you tried reinstalling CS3? If that doesn't work, restore from a backup if needed to stay in production until a solution or an upgrade can be worked out.
I'm not sure the Apple Store will troubleshoot 3rd party software that is 3 versions old. -
my ipod touch will only let me enter apps by double clicking and there is now a voice which wasnt there before how do i get it back to normal does anybody know, please help ??????
Head to Settings -> General -> Accessibility and turn off VoiceOver.
See this article for more assistance.
http://support.apple.com/kb/ht3577
B-rock -
when i go to facebook on firefox it will only let me go to the home page it will not let me play any of my games that i play when i go through enternet exployer what do i need to do so i can play them on firefox or what am i doing wrong
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion, or Mountain Lion (to improve speed)? I'm willing to purchase if necessary and it really helps.
MacBook upgrade possibilities - https://discussions.apple.com/message/19577869 - "The Early 2006 model 1,1 Core Duo can only run a maximum of 10.6 Snow Leopard. The models Late 2006 Core 2 Duos 2,1 through Early 2008 4,1 can only run a maximum of 10.7 Lion. The Late 2008 model 5,1 Aluminum Unibody through the Mid 2010 White Unibody model 7,1 can run 10.8 Mountain Lion."
Kappy 08/2012 post on upgrading to Snow Leopard, then Lion or Mountain Lion - https://discussions.apple.com/message/19401628 - including how to get Snow Leopard and Lion since Apple removed them from the online store. -
I'm trying to purchase a plan on my phone and it will only let me choose the $100. plan which i dont need
Yes, but if you delete the iCloud account and start again, don't you have to wait 90 days for everything to start syncing?? I've been having this problem for months and no one seems to be able to figure it out. I used to have one Apple ID (which was not an email address) and then when iOS came along....and iCloud, they force you to use your email address as ID ....which actually sets up a SECOND Apple ID. I have a Mac, iPad, iPod touch and iPhone. the Apple techs tried to delete the iCloud accounts so that they all said the same thing (email address ID) but then I had to wait 90 days. the 90 days just passed and nothing is automatically syncing yet. I still think there are 2 accounts but if I delete all again.....it's going to be another 90 days (for security reasons, I was told). This is a real pain in the butt.
-
Just did the restore feature on my iphone 4 from the itunes account. Now the iphone will only let me use it to make emergency calls. When I connect the iphone to my computer it is not even recognizing the phone.
Help - how do I get all my info back on so I can use the iphone??Sounds like a computer issue.
http://support.apple.com/kb/ts1567
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I have some malware that will only let me open a safari window part way
I have some malwars that will only let me open a window in Safari part of the way. how can i fix this
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
http://support.apple.com/kb/TS3408 -
My Apple Tv will only the mirror the sound from a movie I mirrored from my Macbook Pro. How do I get the picture?
Do you have a valid credit card associated with the account? If so then I would contact iTunes
-
When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.
-
Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.
Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay -
I attempted to update to iOS 8 and now my phone is stuck in recovery mode, and iTunes will only let me restore to factory settings. My question: Can I restore from iTunes backup after restoring to factory settings?
Hi, kformagg
I would say yes. I once had the same problem (iPhone 5, IOS 7) and first restored to factory settings and after that from iCloud backup.
It worked very well. -
When I updated my iphone software, I lost my contact information. I see the backup on the devices menue in iTunes. However, it will only let me delete this backup and not restore it. How can I restore my old contacts to my iPhone? Thanks!
You will have to restore your iphone.
Maybe you are looking for
-
Document JavaScript tool is missing
Hello I've found this old discussion (see below) - seems like it never came to a solution. I have the same problem. I can't find the Document JavaScript tool in my Acrobat Pro X. It should be in the Tools menu. But this is all there is: The installed
-
Assginment of services to service type
When creating an order with service type ABCDE as item, item not automatically appearing on order. The service type should automatically map to item as other pm service types work. For vehicle some service is due on 1st Nov 2009 and the service which
-
Vendor not able to see bid invitations created one day before
Hi friends, We are workig with SRM5.0 SP08. I have observed that vendors are not able to see bid invitations processed one day before. Could you pls suggest the probable reason, if anybody has come across similar problem? Bid invitation version is ac
-
Attached library webutil added on opening form in forms dev 10.1.2.0.2
Using forms developer 10.1.2.0.2. Converted forms from 6i. Everything is working as expected, however having an issue with Forms developer. I have added the webutil.olb to the forms developer object libraries. I have not attached the webutil object g
-
Upgrading from version to version only masterdata not transactional data
HI friends i have a requirement upgrade 4.7 to any other version we have uploading only masterdata but procedure i know we can download from 4.7 and upload to any other version but our requirement is we have to create a tool whenever u run that tool