Apple TV won't connect to wireless

I purchased my Apple TV in April and it worked great until about a month ago. It suddenly didn't appear in iTunes and had stopped syncing. When I checked network connections it wasn't connecting to my wireless network (which is Airport Express). I've tried restarting wireless network... resetting network, doing diagnostic on Apple TV, even doing a factory reset on the Apple TV..... nothing works... it won't connect to my home network. It doesn't even show up in the networks list... when type in the network name... it just reads "error connecting to network". Nothing changed from when it was working fine? I'm confused? is the Apple TV not working or is the Airport not working? All of my laptops in the house are not having a problem.

I'm not sure how much hassle it will be for you, but the fact that you say it sees the network sometimes tends to tell me it's not dead, I believe (but not one other member of this forum has supported or observed this) that some  wifi equipment has problems forgetting old settings. Would you be able to restore the tv and the express a few times consecutively and start your network again using a new name for your network and a new password etc (try not to re-use any settings from before) also between restores disconnect every cable to each device and leave for 30 seconds.
As I say there is no particular support for what is effectively a theory and if you feel I am just wasting your time, I would understand.
As your user name suggests you are in the US, I wouldn't pretend to understand the return policy over there, to be honest I don't understand the return policy over here, I've found you can phone  one day and get some guy who insists something has to be repaired and the next day get someone who sends a courier around the day after to collect the item and to deliver you a new one at the same time..

Similar Messages

  • My wireless Apple keyboard won't connect, it just keeps blinking to pair, but nothing connects. I even tried hooking up another wireless I have and it does the same thing. Should I delete it and set it up again?

    My wireless Apple keyboard won't connect, it just keeps blinking to pair, but nothing connects. I even tried hooking up another wireless I have and it does the same thing. Should I delete it and set it up again?

    Hey Apple Health,
    Welcome to Apple Support Communities! There's an article that helps to resolve issues with wireless keyboards. I'd take a look at it, go through the troubleshooting steps, and see if that resolves the issue for you:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/TS3048
    Best,
    David

  • Apple TV won't connect to iTunes and does not show up in my devices list in iTunes.

    My older model Apple TV won't connect to iTunes and does not show up in my devices list in iTunes.  I have two Apple TVs in my house and I can't imagine that this is part of the problem but I mention it just in case.  My other Apple TV is brand new and it connects to iTunes just fine.  I've tried most of the "fixes" and one says to Force Sync but I can't since Apple TV isn't in my device list.  Another "Fix" said to Navigate the Apple TV to Settings --> Downloads --> Check for Downloads, but when I tried that there was no option for "Downloads" under the Settings Heading.  I'm at a loss.  Please help.  Could this be an issue with too many authorized devices?  We have three iPads, two iPhones, laptop, desktop, two Apple TVs, and an iPod and most of them are syncing the same music playlists and whatnot...  have I run out of rope?

    hi, just posting to everyone in general..its not you, or your apple tv, it is itunes.
    ok, ive had the exact same issues for weeks now, as with everyone i had done the lastest upgrade and no longer could see/sync my gen 1 appleTV.........so, i removed the upgrade and went back to the prev version, even though it was showing in my prefs under appleTV, it still wouldnt show in the side panel under devices....i gave up.
    This week i was determined to get it to work!  So i started from scratch, totally removed itunes and started back with version 9 and upgrade each version from there, i had no luck, ic clicked find appleTvs but it wouldnt....however i just d/l version 9.2.0.61 and BINGO!. No sooner has it opened and up popped the side panel devices list, showing my appleTV..all ready to be synced etc. I immediately panicked of course haha..and set it all up and its working perfectly.
    ...Only catch now is that this older version will not be compatiable with my iphone, which i do keep music on...seems we cant win. grrrrrrrrrrrrrrrr   this will be the same for all the latest apple products.
    Apple needs to allow more than one version of itunes per pc OR perhaps they could get their act together and include all of the millions of APPLETV GEN1  owners in there latest upgrading..after all, THEY made the product and THEY do sell the movies/tv shows, perhaps they could stop making all the upgrade all about the music only!......on which i might add why not incluse movies/tv shows in icloud! yet another upgrade that should be included in the APPLETV  GERNERATION 1!..yes we do  still exist!
    at the very least, im happy ive managed to get all my movies etc onto the apple tv, where ill keep them and from now on d/l directly onto my apple tv. I usually d/l to my laptop and then send them to the appletv but while trying to get all this sorted i did a test, i d/l a movie  using my appletv hoping it would somehow let itunes "find" it and getting it to show up in my device list, but it didnt work,  however it did sync/send the movie to itunes..  so at least i could save a back up copy.
    good luck trying, as i said this has been weeks and this is the only solution ive found so far....and going through these forums its obviouse its itunes thats the issue, NOT Our apple tvs.

  • My Apple TV Won't Connect to the Internet!

    My Apple TV won't connect to the internet. Everything else in my house does! I've unplugged everything twice and restarted everything twice and still nothing. Any suggestions?

    Make sure router is up to date
    If on wifi try ethernet
    Make sure DNS is set to auto (setting - general - network)

  • After updating my iPod to 5.0.1 it won't connect to wireless networks

    Anyone noticing this problem? I updated to 5.0.1 but now the iPod won't connect to the wireless network. It's not a network problem because my iPad is connected to the same network and I also used this network to update my iPod. It didn't have the problem until after the update.  Any ideas? Thanks

    Mine works after the 5..0.1 update. Have you tried:
    - Resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Resetting network settings: Settings>General>Reset>Reset Network Settings
    - Powering off and then back on your router.

  • HT204400 Apple TV won't connect to the internet

    I'Ve recently installed a new wireless router. all my devices are connecting to the Internet just fine, except my Apple TV which will connect to the network, but not the internet. It will connect, however, via ethernet. Any advice?

    If it's working fine via ethernet then there is likely an issue with the wifi network. Other devices may be working, but that won't rule this out.
    If you want to see an accurate picture of your network go to istumbler, netstumbler or similar to get a report, look for signal strength and noise.
    Make sure DNS is set to auto on ATV (settings - general - network)
    If there are other wifi devices around, if ATV is in a closed space or on top of something..this will impact performance.
    Try changing channels on router (refer to manual if unsure)

  • Hp C4580 printer won't connect to wireless network, but see network is available.

    I've sat through quite a few of the threads here with regard to photsmart C4580 printer not connecting to wireless network.
    My issues started with a cartridge issue, which I resolved with a new cartridge, but only after trying out different solution offered on HP forum.
    Now printer won't connect to my network which it has been connected to for over 2 years with no issues. The wireless network is working perfectly fine and I even printed out a HP photosmart C4500 series connectivity status and in this report printer can see the network I need to connect to.
    I've tried downloading various programs from Scan doctor to complete install of all HP programs and even tried installing printer from Windows 7 "add a printer", but none can see this printer.
    lastly I was hoping trying to locate IP address for printer which looks like it may help, but report says IP Address "not applicable".
    I believe printer, wireless network and PC are working correctly, this there a way to switch printer to online so it can be seen.
    Help would be great.

    Hello there! Welcome to the forums @Cushionman ,
    I noticed your post about the issues you are having with connecting the printer to your network. I am wanting to offer you my suggestion that might help you out!
    Click this link and then choose Windows 7, and "Solution two: Manually resolve the issue", and follow the steps from there: The Printer is Not Found During Wireless Network Installation in Windows
    Let me know the results
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • IPad and Apple TV won't connect after upgrade to 6.1.2

    I have two iPad2 that I installed the latest upgrade on to test the waters last Thursday. They both connected to Apple TV on Friday, now today, Monday, niether will connect.

    I found another discussion that helped with my situation. I turned off the devices; iPad and Apple TVs, then powered down the Wireless Access Point (WAP) and when the WAP came back up, I restarted the devices. In both cases the devices connected without a hitch.

  • Won't Connect to Wireless Network

    So I've set up a wireless network in our apartment (using a Belkin Wireless G router) and our two other Macs (G5 iMac and 17" Powerbook) have no problem connecting to it. However, my flat-panel iMac, though it can connect to other wireless networks, won't connect to ours. It asks for the password, I enter it, and then it just tells me there was an error trying to connect to the network. Any thoughts? Thanks!
    flat-panel iMac, GL1, FCP3   Mac OS X (10.4.9)  

    Nothing out of the ordinary. 
    The exact type may hold the key to the issue though. Ensure that all the devices in your wireless network are using the same type. Older devices may not support WPA but if possible you should use WPA throughout. If you are using WEP then you should set a password that is 13digits long for 128bit encryption and 5 digits long for 40bit encryption.<p<p>> Yeah, I just finished updating everything.
    Have you lost the ability to connect since the updates? And if so what day/date did you upgrade?
    cheers
    mrtotes

  • Won't Connect to Wireless

    I just bought a Macbook on Friday and although it will connect when I plug in the Ethernet cord it won't connect to my home wireless network. it asks me for my WEP password & when I type it in it says "password invalid". I've tried creating a new network on the main computer and connecting the macbook to that network and it stills says "invalid password". I've run the network diagnostics and tried using the assistance numerous times and still no luck. HELP!!

    Hi,
    I have the same problem. I travel a lot and in some hotels, my Macbook can "see" the wireless access point. Although it does not need a password (WEP), the aiport utility asks for one ?! What should I type in?
    I also have a Windows Mobile device from the office (shame!!). When I open up a Wifi connection from this unit, it can connect without any problem... strange behaviour.

  • Apple tv won't connect to my computer

    I just got ATV2 for my husband for his birthday. It connects to his computer just fine, and initally connected to my computer (we both have macs), but now it won't connect to my computer. I have updated my software, turned on home-sharing, etc, but it still won't connect! Any ideas??
    Thanks!
    Rachel

    Welcome to the Apple Community.
    Check you are using the same homesharing ID and password as your husband.
    Check your firewall is allowing access for iTunes.
    Check your computer is on the same network as the Apple TV.

  • G4 (MDD) with AirPort Can't See/Won't Connect to Wireless Networks

    Hi all. I've seen topics/threads that get close to my question/problem, but not quite.
    I inherited a PowerMac G4 (MDD)/Dual 1 GHz/1.5 GB DDR SDRAM/running 10.3.9.
    I purchased a used original AirPort card from eBay, opened up the machine, and plugged it in. When I went to update the software (from a CD), my machine told me that it was up to date (though one HD is running OS9 and one running OSX -- so the software wouldn't install because the HD running OSX said it was up-to-date and the HD running 9 said it was impossible). The machine recognizes the card/shows it gray in the toolbar/says it has Firmware Version 8.70 in the System Profile.
    My problem is that the AirPort can't see any wireless networks 99% of the time, even though 3 (including mine) are in range all the time. I've seen my network only flicker into possibility a few times, and even though I've disabled all security measures on the wireless router (Linksys Wireless-G, Model WRT54G), it simply won't connect. One time in 3 hours it momentarily looked like it was going to connect, then said "out of range," then disappeared completely. It has seen 0 wireless networks for the past hour.
    I've read everything far and wide trying to solve this issue and am totally stuck. At first I thought I needed an antenna for the AirPort, but this is an internal card, so that doesn't seem right. I know the AirPort card (and not Extreme) is right because a) I don't have a FW800 port and b) the machine recognizes this card. Finally, I thought it may have had to do with the WPA security on the Linksys, but even with security disabled...nothing.
    I'm feeling very frustrated. Any advice?
    Thank you very much.

    Thanks, Tom. I did as you suggested, and the Max Signal under the Log is showing a red 12, which is terrible, yes? What, exactly, does this tell me? That this is simply a case of old technology (AirPort b) struggling to communicate with new technology (Linksys g) over a medium distance (Linksys is in next room, through wall)? If plugging straight into the ethernet were an option, I'd just do it. But I can't get my G4 onto the Internet without running cords down the hallway and through my TV room, which is an obvious eyesore.
    Is there a chance this AirPort card is only partly functional and I should return it? Or do I need to accept the fact that this G4 needs to either be moved closer to the Linksys router or be plugged in directly?
    Thank you.

  • Apple Mail won't connect to Gmail

    My Apple Mail 4.5 has been working fine up until a couple of weeks ago.  I don't know what happened, but now it won't connect to Gmail.  It says something like port 993 time out?  I've been searching online to find solutions, but none of them seems to work.  I can still log in thru webmail and I've already checked to see if my POP and IMAP are enabled in Gmail settings.  Please help Apple Geniuses.  Thanks.

    Anything here help?
    Routing gmail through Mail.app:
    imap-http://mail.google.com/support/bin/answer.py?answer=81379&topic=12814
    pop-http://mail.google.com/support/bin/answer.py?answer=13275&topic=12810

  • Macbook Pro won't connect to wireless printer anymore suddenly

    Suddenly my Macbook Pro won't connect to my HP Photosmart B210e Printer.  I have tried adding it via IP address, it worked but I can't print anything.  It says the printer is busy and idle?  I updated the software and drivers.  All other computers and devices in my home connect just fine.  It is connected to our wireless router as is my laptop.
    I have searched online and done all the solutions I could find and nothing is working.  VERY frustrated as I have to log onto my Dell to print anything.
    Thanks in advance for any help!
    Kim

    "It says the printer is busy and idle?"
    System Preferences>print and Scan. What is the staus of the printer? Green light for idle or yellow light for in busy? Have you tried power down the printer and paowering it back up?

  • Brand new Apple TV won´t connect to Internet

    I just bought an Apple TV 3rd generation today. Unfortunately I´m having some issues installing it.
    The Apple TV does connect to my wifi network but won´t connect to Internet. I´m currently using Time Capsule as router and thought that all Apple gadgets would have no problems connecting to each other. Both my Macbook Air and iPhone can connect to Internet when using the same wifi. I´ve tried to restart and restore Apple TV a few times and have also restarted my router. Apple suggested that when troubleshooting, but it did not work. Anyone who knows how to solve this problem?

    I´m not sure what just happened, but when I woke up this morning and started Apple TV it worked. Haven´t done any changes in settings...
    Out of curiosity, if the same problem occurs again how would I solve the internet connection problem. Yesterday I just saw computers/settings on the main screen.

Maybe you are looking for

  • How do I set up a hotmail e-mail account on my iphone?

    How do I set up a hotmail e-mail account on my iphone?

  • Things seem to keep freezing

    when i'm capturing using final cut express hd, i seem to have an occasional problem with my computer freezing when i hit the escape key to end the capture. it seems to happen when i capture for long periods of time. and by long periods of time, i mea

  • Hi guys urgent

    Hi, I am using SO_NEW_DOCUMENT_SEND_API1 for sending mail notifications    l_wa_recieve-receiver = '[email protected]'.    l_wa_recieve-rec_type = 'U'.    l_wa_recieve-com_type  = 'SOTR'.    APPEND l_wa_recieve TO l_it_recieve.    clear l_wa_recieve.

  • Where Can I find and download GOOGLE READER for NO...

    Hi Dear Friends, Do you know Where Can I find and download GOOGLE READER for NOKIA E72? Thank you

  • ISE NFR Allowed protocols

    Hi all, I am trying to configure ISE NFR (installed on vmWare) - I had to start from the only available NFR version 1.0 - so I first made upgrade to version 1.1.1(acording to release notes there should be no problem with stright upgrade) then applyed