Apple TV won't reboot

I have a constant flashing amber light on my ATV. I have tried a restart and I have been able to run diagnostics and it says the ATV is fine but then I only get the option to restart or reset to factory settings. Having tried the restart as I don't particularly want to lose everything it just takes me to the language and TV setting selection and the amber light continues to flash. It does not appear as a device in itunes, however in preferences the ATV is synced. I have tried unplugging everything including the network and rebooting but nothing has changed. Help anyone??

A restore may be your only option. You shouldn't really lose anything though (except a little time), everything on the tv should be in your itunes library.

Similar Messages

  • IPhone won't reboot past Apple logo.

    iPhone 4 won't reboot past Apple logo. It will not show up in iTunes to perform a restore. I can't even get it to turn off. Help?

    Reset phone - press both home and sleep/wake buttons until the Apple logo reappears.
    If that doesn't work, try recovery:
    1. Update to latest iTunes (10.3.1)
    2. Connect phone to a USB port directly on the computer
    3. Press both home and sleep/wake buttons until the Apple logo appears, then continue pressing the home button alone until iTunes detects the phone in Recovery mode.
    4. Follow the prompts to restore.

  • IPhone 5 won't reboot past Apple logo. It will not show up in iTunes to perform a restore.

    iPhone 5 won't reboot past Apple logo. It will not show up in iTunes to perform a restore.After the logo appears the phone will get switched of by its own. I updated my phone 2 days before.

    The iPhone can only be serviced in the country where it has been bought, and it can't be shipped internationally to Apple Support, you'll or somebody else have to bring it personally. If you registered the phone with your Apple ID, you might not need the receipt, Apple Support should have your data.
    Did you try to set it back to factory settings without using any backup afterwards?
    Use iTunes to restore your iOS device to factory settings - Apple Support

  • MBP won't reboot past the white screen with the grey apple. Why? How do I fix it?

    MBP won't reboot past the white screen with the grey apple. Why? How can I fix it?

    Which OS are you on.
    try doing an SMC reset http://support.apple.com/kb/HT3964
    How long do you wait until giving up??

  • 4s won't reboot after ios7 update. I have restored 4 times. Every time it gets stuck on Apple icon with update bar at 10%

    4s won't reboot after ios7 update. I have restored 4 times. Every time it gets stuck on Apple icon with update bar at 10%
    HELP!

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • HT4097 my iPad 3 showing the apple logo, but won't reboot, tried few time hold sleep/home button but still wont work, what can i do

    my iPad 3 showing the apple logo, but won't reboot, tried few time hold sleep/home button but still wont work, what can i do

    Read
    http://support.apple.com/kb/ht1808

  • My iphone 5s just shut down and won't reboot, just flashing apple logo

    my iphone 5s just shut down and won't reboot and just flashes the apple logo. Can anyone help?

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not work, see if you can connect in recovery mode, explained in this aricle:
    If you can't update or restore your iOS device
    If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
    Find an Apple Authorized Service Provider
    iPhone - Contact Support - Apple Support

  • MacBook Pro won't reboot.  Get spinning circle even after hard drive replaced at Apple Store

    MacBook Pro won't reboot.  Have to reinstall OSX each time I shut down in order to get it to start up.  What could be wrong?  I had the hard drive replaced already.

    You shouldn't be using the disc at all. I thought I had made that clear. Boot from your recovery partition and run Disc Utility. If you get the same result -- the internal drive can't be repaired -- then you should consider replacing it. No storage device can be trusted, in my opinion, after throwing an error like that. But whether you choose to replace it or erase it, you have to get the data out first.
    There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
    1. Boot from your recovery partition (10.7 or later), a local Time Machine backup volume (10.7.2 or later), or your installation disc (10.6.8 or earlier.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    2. If you have a working Mac, and both it and the non-working Mac have FireWire ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive.
    How to use and troubleshoot FireWire target disk mode
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Help! My Mac mini won't reboot

    Hi. I posted yesterday (in the Safari forum) concerning a problem I was having with Safari 3.0.4 after updating to 10.4.11. Basically, it wouldn't run. Anyway, I did a bunch of searches on the Web (including this forum) to try to figure out what to do. One piece of advice was to move System/Library/Frameworks/ApplicationServices.frameworkapplicationservices.fram ework to the desktop.
    Well, I did that, and things started acting weird. I tried to copy it back, but the process just seemed to hang. So, I did what I thought was obvious but was apparently a bad idea: I rebooted. Guess what--now my Mac won't reboot. I just get a perpetual hourglass.
    I tried doing repairs with Disk Utility, but that didn't fix the problem. I also did a superfluous Hardware Check from the same OS disk, and that turned out normal.
    So, what's the solution? A visit to my friendly Apple dealer for some service? Or am I just permanently hosed with no recourse? Please let me know what I can do. Thanks!

    Sadly Apple stores are rarely set up for the purpose of completing backups and securing data, so that's not something you can rely on them to do. Some Apple approved service providers are better equipped for doing this, but in the end, it's not a good (or comfortable) proposition to trust your data to anyone else, and the more important that data, the less good, (or comfortable) it is if you have to.
    The risk of data loss is relatively small in this situation - particularly if you ran 'repair disk' from disk utility and it reported no errors. That generally would indicate the drive is healthy and there are no indications of damaged data or file structures. Still there is always a risk!
    In your situation, if I were faced with the knowledge that I was going to be buying an external drive for future backups, I'd be inclined to buy it now (selecting a firewire-connected hard drive of at least the same, if not much larger capacity than the internal), and then run Disk Utility again, this time (carefully) selecting the external drive, partitioning it under the Apple scheme, then formatting it (MacOS Extended (journaled) and then installing MacOS on it from your 10.3 installer. After that, I'd boot to it by holding down the option key during startup, then selecting the external drive from the list that (after a couple of minutes) should appear. Then the internal drive will be mounted on the desktop under the external which has booted the system. That will give you to option to copy your iPhoto and iTunes libraries to the external drive, and thus secure your data.
    Once that's done, you can reboot to the install disk and basically even erase and install, because your data is safe on the external drive!
    After the internal is set up again, and fully updated, it then becomes a simple matter of moving your data back to it, and then erasing the external once more, and setting up your backups with SuperDuper! or CCC.
    It might sound like a bit of messing about, but that would keep your data safe in your own hands!

  • The screen on my iPhone 4s is not working it's just black & won't reboot?

    The screen on my iPhone 4s is not working it's just black & won't reboot?

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • After installing Maverick on my Macbook it won't reboot

    After installing Maverick on my Macbook it won't reboot. It fully downloaded and intalled fine and once it had finished intalling, a pop up message said that my macbook with restart in 10 seconds. i restarted my macbook but it never did anything more than have a grey screen with the apple symbol and a spinning wheel underneath that.
    I have tried starting in safe mode (holding down shift), ive tried holding down command, option, R and P but that didnt work, I have tried holdig down command and R and that didnt work. Holding down option when turning on did work but when i go into disk utility and i try to verify and repair disk of my 250GB Toshiba MK2555GSXF Media i get a warning saying "Live File system repair is not supported"

    Hi,
    On the iOS devices remove the Apple ID.
    Set the device in to Airplane Mode (this breaks with the server)
    Start with the iPhone to add back the Apple ID - only after you see the iPhone Number is Verified.
    The Restart the Mac Version
    Accept the pops ups that state what the iPhone  is using.
    Do same on iPad.
    8:31 pm      Wednesday; April 2, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • My Ipad 2 won't reboot. the little circle keeps going round but the buttons don't work. help please.

    My Ipad 2 won't reboot. The little circle keeps going round but that's all, it won't boot. nothing happens when I press the button on the top either. Please help.

    After you hold the power and home buttons at the SAME time until the Apple Logo appears (ignore the red slider to shut down) then let go of both buttons and you don't need to do anything else.  Your iPad will restart all by itself.  Just be patient, but leave your iPad alone after the Logo appears.

  • MacBook Pro won't reboot after Lion update

    I have updated my new MacBook Pro (2.3GHz I7 15"), and everything seemed to be working fine.  Something was chugging away at the system resources when I was away from my computer and when I came back, I decided to reboot the system.
    Now all that will happen is boot up to the Apple logo and spin the little grey circle, for an hour!  I don't know what to do, help my computer is useless!
    I have booted into the recovery partition and repaired permissions, but it did not help.  Anyone have any ideas?

    alan81 wrote:
    After installing Lion on a 2007 MacBook pro, it won't reboot.  Just gets to the gray screen with the spinning wheel.  Have tried re-installing and disk repair to no avail.  Anyone else figured out how to fix?
    Lion only runs on Intel based systems which have to be core2duo. with a minimum of 2GB RAM.
    If these is given on your system, in most cases it comes from running old PPC-Applications which are not longer supported since Lion.
    Try to start your MB in "Safe Mode" by holding option key (alt) imediately after first chime and disable / delete this applications.
    Lupunus

  • EMac won't reboot after 10.4.7 combo update

    Help! I just installed the 10.4.7 combo update, and my eMac won't reboot. I get to the gray Apple startup screen (no progress dial is displayed), and it won't go any further. Safe mode doesn't work either. Can't get the CD drawer open to boot from CD.
    I must have goofed, because I had the iBook connected to the eMac over the AirPort hub at the time it was updating, doing a backup. (The iBook was the client.)
    The same update worked fine on my iBook. No issues there. Would appreciate any help!

    Hello,
    I just went through all this stuff with another guy here.
    We did eventually get his machine running again (it took a while, but we hit on the right answer for him).
    But, rather than repeat the long and lengthy list of things we tried, I'm going to provide you with the link to our discussion.
    http://discussions.apple.com/thread.jspa?messageID=2641346#2641346
    At the beginning, it will sound more like a complaint. But, it does evolve into a trouble-shooting and repair discussion.
    I would recommend reading through the messages from the beginning, and working your way through the discussion.
    As you proceed, try each of the ideas on your machine.
    With any luck, one of the less dramatic options will work for you.
    I hope you find an answer in there.
    If you try all that, and still nothing works, then let us know.
    I am not trying to "brush you off". But, it was an exhaustive process fixing his machine. And, everything I could offer to you to try would be listed in that discussion.
    So, rather than re-invent the wheel (so to speak), I thought it might be best to just have you try the trouble-shooting steps we discussed there.
    Let me know how that works out for you. And, let me know if it works.
    If it doesn't work, let me know what steps you did try so that I don't suggest something you have already done.
    I do hope this helps.

  • Apple store won't open on iPad?

    Since I had the new software update my apple store won't load.

    Try quitting the App Store completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If that didn't work, try this. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    You can also try rebooting your router. That may help. Unplug it for about 30 seconds and then plug it in again.

Maybe you are looking for

  • How do i change default printer settings

    Hi I have an Epson Photo PX720WD. When I print photos directly from Finder they always print on the A4 plain paper I have in the tray rather than the 6 x 4 photo paper I want them to. The print option in Finder doesn't give me any opportuntiy to sele

  • G10: How to get S-Video In to work outside of Windows MCE

    Hi, does any one know of a way to get the s-video in on a G10 qosmio to work out side of windows MCE i am unable to get it to work with Windows Movie Maker it just says the hardware is begin used by other software but even with just the defult proces

  • Reg : usage of standard Texts(SO10)

    Hi all of u,   I want to use standard texts ,which were created under Tcode SO10, alone to display output without using them in any of the script or smartforms.Also i want to nw that , is it possible to use Variables inside standard text,which r real

  • How to open the url in a new tab of the Browser

    Hi , Am using jdev 11.1.1.2.1 I have a commandLink in a jsff page and on click of that i want to open a new tab with the url given in the action listener. I have the action listener code below: FacesContext fctx = FacesContext.getCurrentInstance(); E

  • Parameters Group are not saved

    Hi expert! Sometimes happened that when I create a new Level,  function or parameter group (usually copy from other level), and saved them. After when I enter again to the system these parameter group does not exists. Does anybody know why happened t