Apple tv won't stay on

I get disconnected after 2-3 minuts when connecting to tv , via Apple TV and my I pad, any answer to that ?
Thanks

What connection do you have? I have a HDMI-DVI connection, worked fine pre-update - 1080i wont work post-update. Many others same issue - type in '1080 gone' in the message board search.

Similar Messages

Apple tv won't stay connected to wifi

my apple tv won't stay connected to wifi. what's the issue?

Answers can only be as helpful as the details provided. And in this case none were give. What is happening? Error message? Other WiFi devices have issues? It is actually losing the connection or is your streaming content just freezing?
Trying to do streaming video over WiFi is not a great idea. Even if you are using the really high end WiFi hardware it will never be completely solid. You really want to use a wired connection for that.

Apple TV won't stay in standby

Whenever I put Apple TV on standby then exit and go to watch TV or a DVD within minutes the Apple TV has powered up again. It won't stay in standby mode.
Any suggestions?

Having the same issue. Holding play also no longer seems to work in putting ATV into standby mode, and now requires going to the menu selection. But as soon as another button is touched on my remote, ATV lights back up.

Apple tv won't stay connected after yosemite upgrade

After upgrading to yosemite non of my apple tvs (3 of) will stay connected.
I have upgraded everything as of the 1/12/14 and still no joy.
I have a good wifi connection so its not that!
I have try connecting by playing through the computer to the apple tv and that also drops out!
I have restarted everything and that didn't help!
I have even setup the apple tv as new to see if that would help, nothing!
I have installed the latest upgrade for yosemite which is supposed to be for connection improvement, which doesn't work either as my mouse still keeps cutting out.
I have even tried changing computers and going through my macbook pro ( also running the latest yosemite) and that doesn't work!
Does any body have any other ideas on what i could try?
Please help
Dave

Not sure what instructions you are referring to, regardless wifi is susceptible to interference. If your neighbour's network is using the same channel or if yours is not encrypted that will of course cause issues, which is a result of the network not the Apple TV. There are also many other factors that can cause interference.
It is working just fine for me and most users, and if you took it to another network you would see similar results. If you wish to resolve then proper troubleshooting needs to occur

HT2822 apple tv won't stay connected

It is difficult to connect to my network. Once connected, it doesn't stay connected.

Answers can only be as helpful as the details provided. And in this case none were give. What is happening? Error message? Other WiFi devices have issues? It is actually losing the connection or is your streaming content just freezing?
Trying to do streaming video over WiFi is not a great idea. Even if you are using the really high end WiFi hardware it will never be completely solid. You really want to use a wired connection for that.

Apple TV won't stay on file sharing, can anyone explain how to keep it connected ??

Having problems keeping Applet TV connected for file sharing, Will disconnect in the middle of watching a movie. Can anyone help
and tell me how to keep the two devises communicating??

Is it just when streaming photos or using home-sharing in general? Check istumbler (netstumbler for windows) to check interference. Also check firewall and anti-virus (if applicable), restart router/make sure it's up to date.

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

The battery is fully charged so it is not the problem.
What happens when you use the MagSafe?

Apple Time Capsule Won't Stay Connected

After Verizon upgraded my router to the 9100EM my Apple Time Capsule Connects to the router but won't stay connected all the time. I have to go into router management console a couple of times a day and reboot it the restore connection. Time Capsule is connected to router by lan cable into port 1 of router. Time capsule set in bridge mode I believe. Just from time to time when I run Air Port Utility Time Capsule has green light but internet goes orange once i reboot I'm good for several hours then loses connection and have to reboot again. Tried looking for other settings to adjust but haven't found anything to help. If any body has any suggestions please help, it just gets old having to reset all the time

If you are using a Mac, which OS is installed?
Use Software Update to make sure you have all the latest updates.
Repair permissions.
Change your router (Airport) channel. Most times this all you have to do!

TROUBLE MOVING CONTACTS FROM ONE GROUP , TO OTHER (APPLE ADDRESS BOOK) WHEN I TRY TO DRAG IT WON'T STAY . WHERE SHOULD I BE , AND HOW DO I DRAG ???? AND RELEASE

TROUBLE MOVING CONTACTS FROM ONE GROUP , , TO OTHER (APPLE ADDRESS BOOK) WHEN I TRY TO DRAG IT WON'T STAY . WHERE SHOULD I BE , AND HOW DO I DRAG ???? AND RELEASE AB

I have many different mailaccounts and different groups of contacts on my ipad and iphone. Sometimes i made the mistake when i create a new account linking it with the standard account. How it is possible to move one account to an other group?

My MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further. What to do?

my MacBook Pro is crashing and Mac OS stops working sometimes so I have to restart it. And sometimes it stays on the first white-ish screen with the Apple and won't start further.
What to do?
Does that mean that the is the end of my Mac Book 5bought in the summer of 2009) ? Or is there someting to do to fix it?
Thanks
V

Try this:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

MacBook Pro won't stay asleep with external monitor attached. When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds.

MacBook Pro won't stay asleep with external monitor attached. When sleep is selected from the Apple menu the computer will go to sleep only to continually wake up...go back to sleep...wake up...etc. every few seconds. This only happens when using the external monitor. Does anyone have any suggestions?

Mine does that too. The worst thing is when it goes to sleep, then wakes up and keeps running while the lid is closed and it is wrapped up in a case. I am afraid when the hot weather comes it is going to burn up. I am hoping Apple fixes it in the software or they may have a melted MBP to replace.
Then when I open the lid it is crashed running at fill tilt, pumping out heat to beat the band. I am forced to hold the button down and reboot.
I wiped my hard disk and reinstalled my OS, but it didn't help. I reversed my OS to 10.5.0 and it solved the DVI problem but still won't sleep. This post will probably be deleted by Apple, they did it a few days ago. I just don't know what to do, and I consider myself a real Apple expert. Just hoping you realize you are not the only one.

Wi-fi won't stay on keeps asking for apple id

Hi all - since updating to I0S6 my wi-fi won't stay connected and it keeps asking me for my apple ID which I put in but it keeps coming up with wrong!!!! Please help

If you have more then one Apple ID you may need to log out on everything and start over. Be careful, using more then one ID can really get you into trouble if you don't keep track of them.
The only other things are these. You could be typing it in wrong. (I do this all the time.) Slow down with the fingers, and make sure the screen is clean. Or, your internet connection is messing up causing it to lose connection before it logs on.
I had a friend that tried to type her password in, and she kept typing it wrong. She finally got it right three days later she told me.

Highlighting text won't stay on

When I highlight text it often won't stay on, and when it does and I try to move the selection, it just beeps at me and sits there. What's up?

Ok. In System Preferences > General, Apple applies the term “Highlight” instead of “Selection” color.
In Pages v5(.2), I select a passage of text and it reflects my first sentence color setting. You can leave this alone and visit any menu or side panel setting, and the selection in the body text will remain selected. It will remain selected, if you leave the Pages document and click in another application. When you return to this Pages document, click anywhere but the body text to regain document focus. The next click in the body text should be a click/hold/drag on the selection to move it, or a press of the space bar to remove the selected text. This is mouse-based behavior.
If you are using a Trackpad, whether built-in or external, you must be very careful not to brush against it while in your Pages document, or your selection focus will be lost.
I am using the above Pages on OS X 10.9.4 and do not experience a loss of selection, or an inability to drag/move or remove the selection. I have tried with both mouse and Trackpad following the preceding guidelines and cannot reproduce what you have stated.

Can't get Apple Remote App to stay connected to my ITunes library.

I recently had my modem and router taken out by lightening. So I replaced them both with what is supposed to be the latest and greatest. Simultaneously, Apple had a new version of ITunes, so I updated. Now I can't get the Apple remote app to stay connected to ITunes. If I start ITunes on my computer, my IPhone 5 will see and connect to the library, as well as my IPad. But as soon as my IPhone or IPad goes to sleep and I try to reconnect to the library, it can't connect to the library. I've never had any connection problems before and not sure what is causing the problem. I can turn off Home Sharing in ITunes and turn it back on again, or restart ITunes and it works, but as soon as the IPhone or IPad goes to sleep, it won't reconnect again. Is this a router issue or ITunes Home Sharing issue? Any input to resolve this will be greatly appreciated..............because it is really annoying not to be able to control music the way I did before! All products have the latest updates.

Take it back and exchange it.
If the remote doesn't work out of the box new then either remote is faulty or AppleTV is faulty (eg IR sensor not located properly in the case).
Either way one of them isn't working, exchange it.

I updated my iPhone 5 software and now it won't stay connected to wi-fi

I updated my iPhone 5 software and now it won't stay connected to wi-fi

Icloud uses you Apple ID. It one of the Key feature on the new ATV. Restart the ATV, if that doesn't work unplug it and restart it. It should resolve the issue

Apple tv won't stay on

Similar Messages

Maybe you are looking for