Apple tv wont start up

Just got a 3rd gen apple tv.
Connected to tv and power. Get the apple tv logo for a few seconds then nothing.
Do I need to do a restore with a micro usb cable (that i don't have) even though it's straight out of the box??
If so, I won't be buying a micro usb cable, I'll be getting a refund!
Cheers

Had the same problem. Solvej it by restringerer the appletv. Hold menu- and Down-buttons Down until lamp on appletv starts to blink

Similar Messages

  • Why does my ipod only show an apple and wont start up

    Why does my Ipod only show an apple and wont do anything else>  And holding down the two buttons has done nothing!

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My apple laptop wont start up. I get the music of opening and then a brief flicker of light then a black dead screen

    my mac laptop wont start up.  It briefly plays the starup music, then a brief flicker of light followed by a black dead screen.
    The power is connected so no trouble there...

    I hope the link helps and Thank You for the reply.
    I am an HP employee.
    Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
    Please click the White Kudos star on the left to say thanks.
    Please mark Accept As Solution if this resolves your issue.

  • APPLE LAPTOP WONT START UP

    my apple powerbook g4 is not starting up i only c the blue screen with the apple logo n the circl thing
    olz help me
    i dont have panter os disk
    SOME 1 SAID DO THIS
    N I DID
    NOW I GET SOME CODES ON MY SCREEN LAODING SCREEN
    I DID THIS
    my apple powerbook g4 is not starting up i only c the blue screen with the apple logo n the circl thing
    olz help me
    To zap the PRAM, hold down Command-Option-P-R after the startup chime.
    However, you might want to do the following. Hold down Command-Option-O-F to go into Open Firmware. Once in there, type "reset-nvram" and hit return. Once returned to the prompt, typr "reset-all", hit Return, and the Mac will reboot. Be sure to leave out the quotes on both commands. Hope this helps.

    RTT try this:
    To start up into Safe Mode (to "Safe Boot"), do this:
    1. Be sure the computer is shut down.
    2. Press the power button.
    3. Immediately after you hear the startup tone, press and hold the Shift key.
    Tip: The Shift key should be held as soon as possible after the startup tone but not before.
    4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
    Once booted up go to this link and follow the procedures.
    http://docs.info.apple.com/article.html?artnum=106464
    If you have any software (diagnostic) such as tech tools pro (v4.1 or newer) or mechwarrior, you should be able to start up off these CD's if this doesn't work.

  • Apple mail wont start after Mountain Lion update

    Hi,
    After the upgrade to Mountain Lion, Apple Mail is not working, it will hang and in Activity Monitor will display  "Not responding".
    Doesnt anybody knows how to repair this?
    Best regards

    Sorry for the delay. I mean a new user profile. Go to preferences / users / +
    After that I restarted the computer and used this new profile to link my email account and iCloud. And copied all my files. Luckily most of my data is in an external hard drive. A particular time consuming task was to rebuild my iTunes library.
    This I is a major internvention and I wouldn't have done it if I could had avoided in another way. It was impossible to work not only te email and address book but the whole computer crashed very often. I noticed that other users didn't had this problem.

  • HT1551 Apple tv wont start.

    Hi,
    The Apple logo appears on my TV, and the light is flashing on the ATV but thats it..
    What to do?

    Welcome to the Apple Community.
    Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • Apple tv wont start after update

    So i just turned my apple tv on and was informed I needed an update so I did this, i didnt actually watch it install I just left it while I did other stuff and after about ten mins looked at my tv and it was flashing no signal check power cables etc
    The device is responsive to the remote in the sense that the little light flashes when i press a button
    here is the best bit...when I unplug the device from the power source and reconnect it the little apple logo appears on the screen then disappears only to show the same no signal msg
    PLZ HELP

    Sounds like the update went badly.
    Get a USB to microUSB cable, use that alone to connect the device to a computer running itunes and restore the device to latest software.
    AC

  • HT1600 apple TV wont start

    it says date and time then dosent turn on

    Sounds like the update went badly.
    Get a USB to microUSB cable, use that alone to connect the device to a computer running itunes and restore the device to latest software.
    AC

  • HT201263 I Have an iPhone 5 runnig ios 7.0.4. It wont start as the apple logo keeps on blinking when i connect to wall charger or itunes. I even tried to restore it but an error 21 is being displayed. Any one can help me in this situation

    I Have an iPhone 5 runnig ios 7.0.4. It wont start as the apple logo keeps on blinking when i connect to wall charger or itunes. I even tried to restore it but an error 21 is being displayed. Any one can help me in this situation

    Read http://support.apple.com/kb/ts3694#

  • My ipod is displying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesnt "see" it even if the computer does.

    "My ipod is displaying apple logo and wont start up, hard reset leaves it the same, disc mode works but iTunes doesn't "see" it even if the computer does."
    It worked two days ago fine, for two years, until I installed this newest iTunes update, then for one day it kept on freezing and going to apple logo screen mode, then today it only goes to that screen and wont start up at all.
    I've tried the hold down two buttons hard reset, that doesn't help. I've tried disc mode... but iTunes doesn't "see" it even if the computer does.
    This is a pristine ipod, never exposed to adverse conditions, never dropped, never wet, and it worked perfectly two days ago.
    Can I factory reset it somehow? (considering itunes can't "see" it)
    [Ipod classic 160gb less than two years old.]

    Looks like I might have found the solution on a youtube comment:
    R.O:
    "Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
    I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
    Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure.

  • HT201413 itunes wont install, runtime error R6034 also 'apple mobile device' wont start! help!

    itunes wont install, runtime error R6034 also 'apple mobile device' wont start! help!

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Iphone stuck with apple symbol and wont start up

    i updated my iphone and when it finished and went to reboot it just stays stuck on the apple symbol it constantly reboots and will never connect to my laptop i dont know what to do if anyone can help please do

    Hi,
    Luca224 & Ingo2711. Thanks for bringing this topic. on 29th Nov. I faced the same problem on my iPhone 3GS 32GB Firmware 3.1.2, iPhone stuck with apple symbol and wont start up. I have tried with 10 Seconds Sleep/wake-up button + home button to reset. But didn't work. Did google about an hour with many blogs. Finally I made a call to 3 iPhone care and spent 30 minutes and explained whatever I have done; iPhone customer care asked me to go to nearby iPhone service center in Sydney. BUT BY LUCK CLICKED ON iTUNE AND GOT THE OPTION FOR ONLINE FORUM FOR APPLE iPHONE. Many many thanks to Ingo2711 who has given the solution link and also thanks to Luca224 , who raised the issue. I feel, this is a common problem with iPhones those who using iPhone 3GS 3.1.2...... but try the link http://support.apple.com/kb/HT1808 and thanks to Luca224 & Ingo2711. PLEASE FOLLOW THE INSTRUCTION CAREFULY:
    1. Verify you have iTunes 7.5 or later. Apple recommends using the latest version of iTunes.
    2. Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    3. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off. _+(in my case - red slider didn't appear, but i pressed the Sleep/Wake button until the iPhone went off, finally it was just off... i was frustrated... tried 3 times with more patience )+_
    4. Press and hold the Home button while reconnecting the USB cable to iPhone. When you reconnect the USB to iPhone, the device should then power on. +_( Do exactly as it says)_+
    Note: If you see the message "Charging... Please Wait" or you see the screen pictured below, let the device charge for at least 10 minutes to ensure the battery has some charge and then start with step 2 again. +_(True ... for me it happened 3 times)_+
    5. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. +_( I was nearly frustrated at my 3rd attempet; my thumb was hurting as I was holding the home button for few minutes..... but finally it worked yahooooooooooooooooo...... suddenly changed my decision.... about going to 3/Apple service center)_+
    6. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
    If you don't see the "Connect to iTunes" screen, then disconnect the USB cable from iPhone and repeat steps 3-6.
    Because you must restore iPhone or iPod touch, iTunes will not recover data from the device, but if it was previously synced on the same computer and the same user account, it should restore a backup (if available). See document HT1414, "Updating and Restoring iPhone Software."
    If you are still unable to restore the iPhone using this method, check Apple support for further troubleshooting and/or service options.
    Note: If you sync both an iPhone and an iPod touch to the same computer, make sure you select the correct backup to restore your settings from (don't select an iPhone backup if you have an iPod touch and don't select an iPod touch backup if you have an iPhone).
    **** ( BACKUP FROM YOUR iTUNES : MAC/PC; AS I GOT MY 95% DATA FROM THERE.... GOOD LUCK)******* IF IT WORKS PLEASE POST YOUR EXPERIENCE....*
    THANKS

  • Error 3194 still presist while restoring ipod touch 4g, just shows apple logo and wont start

    Method 1: i have tried almost everything, 'hosts' file editing (adding and deleting that ip gs.apple.com thing)
    Method 2: redsnow, snowbreeze,ireb (custom ispw and fetching thing)...
    now my ipod is in dead case, it just gives apple logo  and wont start.
    Method 3: TS 3.0 and 1.0 checked, certificate xyz... uncheked from intertnet explorer-> internet option -> advanced -> security
    Method 4: netsh xyz  (comand) in cmd...
    Please Help thank you.
    "Details:
    ipod touch 4g
    ios 6.1 installed (lastly)
    jail broken but deleted cydia from it
    then tried to restore it always gave Error 3194,
    then restored it from its backup file after that it didnt opened or just showed apple logo thats it."
    my itunes on dignostic gives this report,
    Microsoft Windows 7 Business Edition Service Pack 1 (Build 7601)
    Hewlett-Packard HP xw4400 Workstation
    iTunes 11.1.1.11
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 2.3.6
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.0.0.117
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 001AB71808E6CBD8
    Current user is not an administrator.
    The current local date and time is 2013-11-29 04:19:21.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce 8400
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.1.1.11 is currently running.
    iTunesHelper 11.1.1.11 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:    {BC8F9388-D244-4F12-92A3-A26318EE6C52}
    Description:    Broadcom NetXtreme Gigabit Ethernet
    IP Address:    192.168.1.102
    Subnet Mask:    255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:    Yes
    DHCP Server:    192.168.1.1
    Lease Obtained:    Fri Nov 29 04:16:55 2013
    Lease Expires:    Fri Nov 29 06:16:55 2013
    DNS Servers:    192.168.1.1
    Active Connection:    LAN Connection
    Connected:    Yes
    Online:        Yes
    Using Modem:    No
    Using LAN:    Yes
    Using Proxy:    No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-11-29 04:18:45.

    lllaass thank u bro, but none worked for me
    i have tried all these methods n above which i mentioned before....
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem
    in the end i went ot market n paid him 1.94$ and he restored it to 6.1.5... and said apple has closed other ios updation except 6.1.5 ...but still thank u soo much learned some new stuff from u...

  • TS3274 my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

    my ipad does not start or reset even. when i hold both buttons only apple logo appears and ipad wont start. plz help somebody

    try restoring see guide
    http://www.ipadforums.net/ipad-help/2987-how-put-your-ipad-into-recovery-mode.ht ml

  • HT1349 should i replace the battery if my laptop is 3 years old and wont start up or recieve power ... took it to apple and the guy readjusted my battery and it was fine for two days and same thing happened? thinking of buying a new battery

    should i replace the battery if my laptop is 3 years old and wont start up or recieve power ... took it to apple and the guy readjusted my battery and it was fine for two days and same thing happened? thinking of buying a new battery

    I am bemused and have to ask how one "readjusts" a battery?

Maybe you are looking for

  • How to upload pics from sketchbook

    Hi... I'm trying to send pics to email account by using sketchbook pro on ipad. Then need to upload these pics onto powerpoint and need to find a way to compress the file so it is not more than 50MB. Can anyone help thanks.

  • JDBC Sender Adapter Message format

    I am somenone who is new to SAP PI so please help me out in the format of datatype for JDBC SENDER Adapter ?

  • How to reuse a pre-populate adapter

    Hi OIM gurus, I have a pre-pop rule gen adapter that computes the value of a process form attribute based on business logic applied to a OIM user form attribute. Now, if the OIM user form attribute changes I want this pre-pop to run again and update

  • Passing Array to Custom Component

    I have a custom button component that has the following setter function: //get title dimensions [Bindable] public function get titleDims():Array {    return _cubeTitleArray; In main.mxml, the button MXML code is as follows: <comp:updateButton id="upd

  • BW 3.5 Upgrade to 7.0 ( ABAP OO upgrade required ? )

    We are planning to upgrade from BW 3.5 to 7.0. Are we required to upgrade/modify all our ABAP code in the start routines/update rules/transfer rules to the new ABAP Object Oriented code ? Would it be possible to migrate all the 3.5 BW objects to 7.0