Apple TV2. black screen

I have a magnavox 42"tv. When I plug in Apple TV2 it shows Apple home screen and in 10 sec. the screen goes black. Any ideas?

Welcome to the Apple Community.
Check that the HDMI cable is correctly seated at both ends.
Try disconnecting the cable and connecting it again.
Try another HDMI cable.
Make sure your TV supports 720p
Try the Apple TV with another TV

Similar Messages

  • Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.

    Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Ipad 2 ios 5.0.1 stuck at apple logo black screen, subsequently cannot restore, face error 16XX in itunes.

    i have encountered this problem even after 10 hours of troubleshooting various methods, when i turned off my ipad and when turning it back on, it would just hang during the white apple logo on the black screen and remain there with no sign of activity till i hold the lock + home button till it shuts down.
    after several attempts, i tried to put it into recovery and restore firmware, it would get stuck at stage "preparing ipad for restore" after i click on restore ipad.
    i have attempted:
    dfu and restore, 1600 error
    recovery and restore, 21 error
    my ipad 2 is wi-fi only model running ios 5.0.1.
    i can't think of anything else other than sending it to applecare. my ipad 2 was recently purchased in jan this year. any input would be greatly welcomed!

    Just follow these steps. I am sure it will solve your problem.
    http://support.apple.com/kb/HT1808?locale=en_GB&login=email

  • HT1199 After trying to install window 7 my new iMac will not reboot back to apple. Black screen "No bootable device -- insert boot disk and press any key". How do I get out of this?

    After trying to install Windows 7 in my new iMac It will not boot up back to Apple. I have a black screen with the following "No bootable device -- insert boot disk and press any key". My iMac did not come with a boot disk. What can I do?

    Try holding down the option/alt key during a restart and see if you can see/select your boot drive there.

  • Apple tv - black screen

    I have the  icon at start up and nothing just a black screen no picture no audio just a black screen.
    How can I reset  tv when I can see the menu screen....
    Help
    I just love screaming my rented movies to my tv..

    BluCrutch wrote:
    I am connected via HDMI cables.... I dont have components..
    The artwork is now on all the time during the duration of the song... with a black background..
    it could be a faulty HDMI cable, or faulty connection with TV.
    i would try another HDMI cable and/or component cable.

  • I bought an ipad mini from John Lewis in February. On Saturday the ipad suddenly stopped working. I tried charging it but all it done was go to the start up apple page (black screen with white apple) then shut down and constantly repeat this process.

    I took it back to John Lewis today to get fixed as its still under warranty. Because there was scratches on the back of it.... Which is hard to avoid with the slate back!!! I got told apple will probably not fix it as it looks as if I've done it! I couldn't believe it!! If I honestly dropped it that bad to have caused a technical fault inside I would of smashed the screen as the same time!! Absolutely ridiculous as I know it isn't through any fault of my own.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Apple TV Black Screen Unless I Reset

    Hi,
    I've been using a Gen2 apple tv for years and got a Gen3 for my parents for Christmas.  I set it up on their TV and everything worked fine.  After turning it off so I could show my parents how to use it, the light lit up on the front (stayed lit) and there was nothing on the screen.  Unplugging and plugging it in fixed this issue, but it still persists whenever it's turned off or is left idle for a long period of time so it shuts down automatically.  I'm not sure what's causing this, so any suggestions would be helpful.

    SImilar situation here with my new Apple TV Gen 3. While it is working perfectly in streaming movies, iTunes, etc., the unit doesn't stay ON when it's idle. I've had to unplug and replug the power cord to get the status light to come back on. Then everything is fine. Seems like a little problem, but it's not exactly an elegant way to access this cutting edge technology. I spoke with an Apple support rep who suggested switching HDMI inputs on my tv (there are three that are unused). I've tried them all, but the same thing happens—after about an hour of not using the Apple TV box, the status light goes off and it is undiscoverable on the assigned HDMI input screen, until I unplug and replug the power.

  • HT1551 start apple tv - black screen, no connection

    Hello,
    cannot start Apple TV. Have tried different HDMI cables, and different HDMI inputs. Also, tried to configure TV channel as well. No success. Cable TV, Blue-Ray home theater, everything works but apple TV. My TV is: Philips flat HDTV 42PFL7432D 42'' LCD integrated digital with Perfect Pixel HD Engine and Ambilight 2 channel
    Is my TV suitable??
    Thanks

    Welcome to the Apple Community.
    Are you able to try the Apple TV with another TV set.

  • After Apple service black screen, white words

    My MBP was recently in the Apple service center for work and returned in perfect condition... except that I am now seeing some form of diagnosis feature at power on and power down. I believe something was not "switched off" after they got done doing the magic they do in the Apple offices. What I am seeing is the actual line by line boot-up and line by line power-down.
    Is there a way I can turn this feature off? Just a little annoying, is all.

    Reset the PRAM:
    http://support.apple.com/kb/HT1379

  • My iphone is stuck on the apple logo black screen and it keeps flashing, how can i get this to turn on properly?

    Please help me with this?

    You need to restore the phone from Recovery Mode: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Ipad2 showing black screen after being upgraded to ios5

    I upgraded IPad2 to ios5 through Mac, since then - for 5 hours - it has apple on black screen and mur-murs something every 5 minutes. For how long might it continue ?

    Hello BitMazta, please tell us a little more about your computer:1.) More detail on the model number (example Probook 4710S).2.) How much ram does your computer have? 3.) I have two great links at this recent thread that could help you: Upgrade to Win 10 Good luck! 

  • After applying update my apple tv2 will randomly go to a black screen that lasts for a few seconds. When it gets back to normal after a few seconds it acts like the video never stopped since its farther along in the timeline. This happens with all video c

    After applying update my apple tv2 will randomly go to a black screen that lasts for a few seconds. When it gets back to normal after a few seconds it acts like the video never stopped since its farther along in the timeline. This happens with all video content wether its from Netflix or streaming from my iTunes library

    You might try restarting the Apple TV by removing ALL the cables for a 30 seconds. If that doesn't help try using another HDMI cable.

  • I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

    I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • When i try to turn ipod touch on it stays on the black screen with the apple and nothing else happens. whats wrong?

    okay so just as i was typing this the problem resolved itself, but when i went to charge my ipod i noticed ot stayed on the black screen with the apple for a good 10 minutes, so i pressed buttons furiously (!!) and the screen went white and then back on to the screen with apple again. this contiinued for a good 4 tries then eventually went on to my lock screen (which is the very beautiful dom howard not that you know who that is and i dont even know any of you so i dont know why im typing all of this out but i really enjoy typing it's an incredibly exciting past time of mine but unfortunately i havent used capital letters) just wondering if it will happen again

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

    My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
    Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

Maybe you are looking for

  • How do I change the email associated with my revel library?

    I changed the email address associated with my Adobe account. when I open Revel with my new address, it does not show any images. if i open Revel with my old address, it shows all of my images.

  • Itunes Freezing - HERES THE FIX

    The problem is with the firmware upgrade to 1.0.2 If your Itunes freezes, or explorer etc etc follow these instructions to fix the problem. http://spr33.co.uk/wp/archives/downgrading-apple-ipod-firmware-102-101 **PLEASE NOTE IF YOU DOWNGRADE THE FIRM

  • Where are the SyncBOs stored in the server.

    Hi, I have created some SyncBOs in the SAP system. Now I want to take back up of them.. Can I know where are they stored in the server and how can I go about having there backup? Waiting for some quick answers Ankur

  • Replacement battery won't fit into my 3g touch wheel ipod

    I just changed the battery on my 3g ipod, but the 850 aMh battery that is labelled "Replacement battery for 3G ipod" is bigger than the original 700 aMh battery. I can force it in, but I don't want to break anything. Has anyone else had experienced t

  • Module Pool Screen:Want to do Validation on listbox selection w/o Hitting Enter

    Dear Team, I want to write some code(Check & validation) at the time of listbox selection(any value) without Hitting enter.As when i am trying to put '/H' It's not taking me inside the program (but after listbox selection & enter hit i could go into