Apple TV2 periodically stops playing audio

Hi
I have had an annoying problem with my Apple TV2 after upgrading to the latest firmware (6.0). When streaming video content from my MacMini Server (via ethernet) the Apple TV periodically stops playing the audio while the movie keeps playing without audio. I can solve the problem by pausing and then continuing the movie, which will bring back the audio.
I have tried to restore and reinstall the firmware (6.0) via the Apple TV because I also had problems with the Apple TV stuttering when streaming content from my MacMini, but the reinstallation of firmware did not solved the issue.
I don't know if this is somehow related to the issue, but after having updated to firmware 6.0 Netflix often ask me for my login credetials on the Apple TV. This is an issue that I also never experienced before upgrading the firmware.
What to do now?
Thanks...

So it's been a few months since I saw this thread started, and I am still having the same issues as above with my Apple TV 3. I can go a day or two and at some point, all connections just seem to error out. HBO go, Netflix, me streaming from my ipad, etc.   thought they would have been addressed by now.
I have to hard reboot (power plug only) in order for it to go back to normal.
I know it's a hardware issue as I have an Apple TV 2 setup in another room and it never gives me an issue,
The weird thing is, I have the exact same setup at my office as well.  An Apple TV 3 in the main conf. Area and an Apple TV 2 in our break area. Same issue - Apple TV 3 needs hard (pore Plug) reset every few days and the Apple TV 2 in the break room is rock solid for months.
Both Apple TV 3 units are at most recent 6.1 software release.
Anyone have any ideas?  Think I a just going to put my Apple TV 3's aside for a while and use the 2's until it gets worked out.

Similar Messages

  • My Apple iPod Nano stops playing shortly after plugging in the correct headset, but works on docking station. I've tried enabling and disabling crossfade in settings. Any suggestions?

    My apple ipod Nano stops playing shortly after plugging in the correct headset. I've tried enabling and disabling crossfade in settings. Any suggestions?

    Make sure your headphones are plugged ALL the way in, meaning the white part of the headphones is flush with the Nano and you cannot see any silver from the plug still showing.
    B-rock

  • Logic stopped playing audio

    Hello everybody, this is a vital question.
    After the latest security update, logic stopped playing audio. After a short debug I discovered that core audio doesn't show any external interface anymore, so any other song is affected. I dont know if the security update is related... Anyways Logic is gone and my songs too!!!
    Audio-Midi configuration, as well as the interface related control panels, work as expected and audio is correctly played by the finder. All other software which makes use of core audio (e.g. Bias Peak) works.
    My interfaces are AVID M-Audio Fast Track Ultra and, for this testing purposes, M-Audio Audiosport Duo (legacy), all with the latest drivers.
    Obviously my Logic is officially bought from the App Store.
    MacPro (late 2007) 7GB RAM 2 x 2,66Ghz Dual Core Intel Xeon
    Mac OS X 10.7.5 (latest update)
    Logic Pro 9.1.8 (1700.67) 32 bit (latest update)
    AVID M-Audio Fast Track Ultra with 2.2.2 firmware (latest update)

    Hey icedj,
    I had that happen. I had to trash my Logic prefs, then restart Logic. It's a P.I.T.A. because you lose various settings (color settings, for instance), but it fixed the problem for me.
    Bamboof
    Vallejo, CA

  • HT1551 my apple tv intermittently stops playing music while playing Songza.  network connection is strong.  i have upgraded to the latest appletv s/w

    My apple tv intermittently stops playing music while playing Songza.  network connection is strong.  i have upgraded to the latest appletv s/w
    what can i do to fix this?

    Strangely enough, I exchanged the ATV2 and ATV3 and now both work fine. I suspect it may have something to do with the fact that (previously) the ATV3 (1080p) was behind an ethernet hub. Somehow the ATV2 (720p) does not mind being behind the hub. Either that or iTunes suddenly became smarter since the exchange . Anyway, it works now so I'm not touching it. Thanks for the suggestion.

  • Shuffle 2 stopped playing audio podcasts

    Hi. I have a Shuffle 2nd generation that just stopped playing audio podcasts. I've been listening to music and OTR and CBC Radio podcasts, and all of a sudden it stopped playing the podcasts. Music plays fine, but if I just load it with podcasts, and try to play them, my little light just blinks (saying "you don't have anything loaded!"). It still plays the music, but skips over each podcast.
    The podcasts are good. I used to play the exact same ones a month or two ago - then it just stopped playing them. I can listen to the podcasts on Itunes, and can listen to them on my old Shuffle 1st generation.
    Help!

    ooh, I did a bit more research and found a solution for my problem.
    iPod shuffle won't play podcasts if its in shuffle mode.  You have to switch it to linear mode.
    I did that and now it plays just fine.  Hopefully that's all that was wrong with yours as well.
    I must have accidentally switched mine by accident and not realized it.

  • Apple TV2 slow to play

    I hate to add to this chorus of compaints regarding the Apple TV2, but I too just purchased an Apple TV2 for Christmas.  All my movies are already loaded on my Mac Pro and exist in iTunes.  It is not a problem with downloading or streaming from Apple.  They play fine on the MacPro.  The regular definition movies play almost instantly on my Apple TV2.
    The Problem is that I cannot get it to play an HD movie.  I purchased my first HD movie from the iTunes store last night.  It downloaded from the iTunes store to my Mac Pro  in approximately 20 minutes along with what appears as a regular definition version of the movie and "extras".  I have been watching over 20 minutes of spinning beachballs waiting for it to begin playing on the Apple TV2.  The Airport Utility says that Apple TV2 connection to my Airport Extreme is "Excellent" with a data rate of 65 MB/s, an RSSI (whatever that is) of -49, and a Mode of 802.11 b/g/n
    Can anyone help?  Otherwise this device is useless for me to watch HD video.  My Mac Pro is running the latest version of Snow Leapord (10.6.8) and all other software is up to date with the latest version.
    Is there a reset that I need to push?  Anything?

    Just got off the phone with Apple Support.  There procedure was the following:
    1.  Go to the Apple TV, select settings, general and scroll down to reset.
    2.  Select reset and then select reset all
    Apple TV will go through a restart after the reset and you will have to select your network then log in with your network or Airport Express password.  You will then have to turn on home sharing and It will then ask you for your Apple ID for the iTunes store and then the password.  At this point you may not see your library, because the Apple TV wants you to turn on home sharing on your home computer that is hosting the movie library.  Turn off home sharing on that computer, restart iTunes and turn on home sharing again.  After this is done you should be able to see you library listed under the computer.
    After going through these steps, when I select an HD movie from my iTunes library the movie comes up after about a 5 second delay.
    Hope this helps!  I am back up for business.

  • Apple TV suddenly stopped playing any video

    Yesterady my apple tv stopped playing any type of video. This includes movies I've purchased on iTunes, previews on iTunes, Hulu, Netflix. I click play on the video the spinner pops up and the video *almost* starts and then just cancels itself going back to the previous screen. I've tried:
    1. Restarting ATV
    2. Resetting ATV
    3. Testing network connection on ATV -> all is ok
    4. Restarting my router & ATV
    I'm able to go on the internet with other devices so I know I have internet connection. I'm also able to sign into the Apple Network with my ATV so I believe it has internet connection as well.

    So we have this ATT provider in common. 
    Based upon this other discussion --  https://discussions.apple.com/thread/5565870?start=0&tstart=0 --   I ran the Netflix video called 'Example Short 23.976' -- though I had to wait about 15 minutes for it to start playing, it eventually did. I have the U-Verse service of 12 MBPS, and speedtest.net confirms that is what I am indeed getting.  But the results showing in Example Short 23.976 should be (and used to be) 5800 kbps; tonight it is 230 kbps, then 500, then 1000, then 2000, then freeze, buffer for a minute, then back down to 230 kbps.
    I suggest you run the Netflix video called 'Example Short 23.976' both during prime time hours and at other times during the day, and report back to us with your results.  I have a suspicion this is an ATT problem.

  • Audition CS5.5 suddenly stopped playing audio?

    Audition has been running perfectly for the past month since I got it,
    but all of a sudden, the audio stopped playing? The tracker is still moving and the mixer levels are still jumping around like they do when you play something back?
    In the preferences menu, in the Audio Hardware section,
    It's only showing 'ASIO4all v2' as a device and nothing else - normally there is at least 2 or 3.
    I've done everything I could think of (Yes, including turning it off and on again)
    What should I do?
    I have to fix this quickly as I've got quite a bit of work to do and I'm stuck until it's done.
    I'm also using headphones if that helps at all.
    Thanks.

    ASIO4ALL is just a wrapper for other devices on your system.  If you click the Settings button in the hardware preferences, it should open the ASIO4ALL control panel.  You'll want to make sure the correct audio device is listed and enabled within.  Sometimes, if a device is disconnected or the driver is updated, ASIO4ALL may not recognize it as the same device it was using before. 
    Depending on what audio device you have, you might want to try choosing MME as your Audio Driver option and selecting the device directly and see if you have a similar problem.

  • Apple TV 1 stops playing music, returns to a menu screen.  Usually occurs after several hours.  Reselecting music playlist and pushing start will get it playing again.  I have not seen anything like this in the forum.

    Apple TV 1 is used exclusively for music playback.  The device is often in use 4 to 8 hours daily.  I have had no problems with it in over two years of use.  In the last few weeks it has started a new behaviour.
    At random times but not always, it will simply stop playing the playlist and return to a menu screen.  Playing music again requires selecting a playlist and pressing play.  The device continues working and does not require restarting or resetting.
    I have browsed the topics for Apple TV 1 and have not found anything similar to this problem.

    Welcome to the Apple Community.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • For certain songs on my iPhone 4s with iOS7 some songs stop playing audio but continue playing the song almost as if it were muted. Where can I fix this? Say "Stronger" by Kanye West stops playing sound after 2:25 but it is 5 minutes long.

    Basically it is just like it says. Certain songs stop playing sound after a certain point in the song but the song continues playing and ticking down like it normally would. Does anyone else have this problem?

    Hi I found the answer from another post. So far everything is working find. I been trying to fix this since march,
    from
    Mike N. (nahyun...
    Posts: 2,814
    From: New York, NY
    Registered: Oct 1, 2003
    Re: itune application and itune folder
    Posted: Jun 27, 2007 7:16 AM in response to: Austin Smith2
    Solved
    Reply Email
    Deleting the application rarely solves anything on Macs. A better starting point is normally to delete the preference file for the application (in Users/~/Library/Preferences/com.apple.itunes.plist) or see if you have the same problem in another user account on the computer.
    PM MDD(1.25GHz 1.25G-RAM 320G-HD) Mac OS X (10.4.10) 20"ACD USB2Connect MacBook (2.0 White)-2GB Report this post
    Austin Smith2
    Posts: 118
    Registered: Oct 31, 2001
    Re: itune application and itune folder
    Posted: Jun 27, 2007 12:51 PM in response to: Mike N. (nahyun...
    Reply Email
    Mike, deleting the preferences did the trick, but I don't know why. Itunes downloaded 5 days of podcast! Hurray!! Thank you!!!!!!!!!

  • Quicktime stopped playing audio online

    I have a powerpoint lesson online and there is audio attached that plays through quicktime but it has stopped working and instead of an audio player there is not just a small quicktime icon in its place. How do I fix it so it will play again? This is online

    "This just recently happened."
    In that case, try the following............
    Repair permissions & restart.
    http://docs.info.apple.com/article.html?artnum=300832 Mac OS X: No audio from certain multimedia content
    Trick/Tip: Open up GarageBand if installed then, open a program (optional).
    Quit out of the GarageBand app.

  • Apple TV 2 Stops Playing after 2 Songs

    My apple TV 2 plays 2 songs and stops since I downloaded the iTunes and Apple TV updates. Is Apple jamming our home libraries so that we pay $24.99 per year for iTunes Match? I'm ready to drop Apple products.

    It was happening 90% of the time at 1:02 minutes into the track.  Even though ATV did not suggest an upgrade, I went to the software update, and it updated something (no information was displayed).
    So, now it is up-to-date, but I still get a random stoppage in the middle of a track (10% of the tracks), and it jumps to the next track.
    I have it on shuffle.  I am on wired ethernet (was on wireless, but switched to hard-wire just in case it was some network issue).
    Sigh.

  • Apple TV randomly stops playing music after 20 seconds and goes to next tune

    I have the most updated OS on Apple TV, and recently it has started playing a track, after 20-30 seconds it abruptly stops and goes on to the next track.  Some tracks play in entirety, but then several in a row will be abruptly ended.  Any help to correct this is appreciated.

    It was happening 90% of the time at 1:02 minutes into the track.  Even though ATV did not suggest an upgrade, I went to the software update, and it updated something (no information was displayed).
    So, now it is up-to-date, but I still get a random stoppage in the middle of a track (10% of the tracks), and it jumps to the next track.
    I have it on shuffle.  I am on wired ethernet (was on wireless, but switched to hard-wire just in case it was some network issue).
    Sigh.

  • Is it Possible to stream video off of my macbook pro to my apple tv2 but stream the audio to my airport express?

    I know you can play music over multiple speakers but is it possible to play video on an apple tv and the audio that goes with that video on an airport express  at the same time? It would be nice to have some better sound then my tv speakers while watching movies.

    i haven't used Airfoil (or Airfoil Video Player for that matter) to stream movies but it ought to work with TV - at least that's what the developers claim. and you are able to select multiple remote speakers so the audio can be sent to TV and AX simultaneously (mute TV to have sound via AX only).
    the only problem is content from the iTS:
    Because it is impossible to control playback of DRMed iTunes Store videos, they can't be played with Airfoil Video Player
    anyways, there is a (albeit limited) trial version available so it won't hurt giving the app a go.

  • ITunes Extras on Apple TV: video features play audio only; no video (bug)

    I downloaded "Star Trek" (2009) with iTunes extras; I accessed the film on my Apple TV, and went to the additional video content page. However, when I attempted to play the extra video features, I received the alert message that the "music volume" was low, prompting me to hit "OK". The screen would return to the menu, and the audio from the extra feature would play; no video from the feature would appear.
    This is a bug--until a update comes to the Apple TV, an interim solution would be to go to Settings > Audio & Video > Control Music Volume, and turning the music volume control off.

    Yes, sounds as though it's failing or failed.
    You'll be lucky to get it repaired if it's out of warranty.  Apple didn't even offer a paid repair when one of mine failed.
    Got home from holiday yesterday and the PVR hard drive seems to have failed and is just clicking away.

Maybe you are looking for

  • What is "Publish To New Folder?"

    Captivate's *Edit/Preferences/Global* preferences include options for the user to review a confirmation dialog before the software proceeds to execute a variety of user actions, mostly actions that would delete an asset or change an important setting

  • Dual control one-time vendors possible?

    Dear experts, Does any of you know if it is possible to have dual control on sensitive fields for one-time vendors? Thanks. Jurriaan

  • Validators - Event Listening

    I need to change the trigger event for a validator so it checks as soon as information is entered in a text area. 1. Currently I have to click on something else before the Validator checks to see if anything is in the text area. I would like it to ch

  • Need help in module pool program

    help me to create dialog program for upload data into DDIC table.FOR EXAMPLE IN CREATING MATERIAL THROUGH MM01 DATA WHIH YOU ARE ENTRING INTO THE FIELD WILL BE STORED IN MARA TABLE. Message was edited by:         neela renganathan

  • Some issue in Best Practice Implementation

    Hi, When i try to "Register Item for New system" in System Administration --> System Configuration -->Universal Worklist & Workflow --> Universal WorkList - Administration, i am getting the following error : Errors: System SAPRETAIL: Mon Mar 09 12:25