Apple TV3 Wi-Fi stop working after update

I update my Apple TV3 few days ago and now when I go to connect my Apple TV3 to the internet no Wi-Fi networks show up. Anybody here can help? it work fine with ethernet cable also I reset to factory setting but still when I go to Wi-Fi it dosent show any network.

is the wifi option greyed out?
reset network settings
settings-general-reset-reset network settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
if no result you need to restore device
http://support.apple.com/kb/HT1414
set up as new if wifi is still greyed out then you need to have it repaired
Peace, Clyde

Similar Messages

  • Wifi iPad 3 charger stopped working after updating to iOS 6, help!

    Wifi iPad 3 charger stopped working after updating to iOS 6.  The little iPhone charger charges it very very slowly, but the charger gets really hot after a while.  I restored it and everything works but the charger.  It's only a few months old, should I try a new iPad wall charger block?

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

  • HT201371 Touch ID stopped working after updating to IOS 7.1.

    Good morning to all,
    My touch ID stopped working after updating to IOS 7.1.
    It was working perfectly until the update and then it stopped recognizing my prints
    I've reset the phone and deleted my fingerprints and now I can't even add a fingerprint again.
    I am sure this is not a hardware problem since the phone was working perfectly before the update and it didn't fall nor anything similar.
    Also the sensor is clean as well as my fingers.

    Same problem... I think we all should let Apple know of this issue. http://www.apple.com/feedback/ tell them the probelm. So when they get too many complains they will surely fix it ASAP with a software update.

  • Earpiece stopped working after updating to 5.0.1.

    It worked fine the night before.  Then it stopped working after updating to 5.0.1.  I can only hear calls on speaker.  Did anyone else have this problem.  I have tried all the fixes, restart, reboot, restore.  No debris in the headphone jack, and when volume is turned up or down it doesn't show headphones on the screen.  Nothing covering the earpiece.  Tried to blow out headphone jack with compressed air.  I'm thinking it is a glitch in the software.  Using Iphone 4 on Verizon.  Any thoughts or ideas?

    you can try reading the posts listed to your right in the "More Like This" box or by searching this forum.

  • The inspector stopped working after update

    The inspector stopped working after an update. When I click on the inspector button it says "An unexpected error has occured. Please quit and reopen Keynote." Quitting and reopening Keynote does not fix the problem. Inspector does not work in Pages either (it doesn't do anything when I click on it), but it does work in Numbers. I also am having problems opening files created in Numbers before the update.

    Hi jeau300!
    Here is an article that can give you some tips about using your computer with your external monitor in closed clamshell mode:
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    http://support.apple.com/kb/ht3131
    How to disconnect your Mac notebook from the display after use:
    For best results it is recommend that you put your computer to sleep before disconnecting your display.
    Note: Some DVI and Mini DisplayPort displays—including Apple's aluminum-framed DVI displays and the 24-inch and 27-inch LED Cinema Displays—can be unplugged without putting the computer to sleep. If you aren't sure whether your display supports this feature, put your computer to sleep before unplugging the display.
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • My Plug in "Free Download Manager" stopped working after update

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    My Plug in = "Free Download Manager" stopped working after I updated FIrefox !
    It worked fine previously ! What did I do wrong ??
    **** Also I've forgotten my User name, but Firefox says that my email is registered already
    I was on some other Internet provider; and have been a PC user since 1987 ! I am a Retired Network Administrator for both Microsoft NT4 & Novell 4.x Networking; and a former IS Dept. Tech' for an Orlando, FL Corp' that had over 500 PC's;
    both Lap & Desk Top for some 3 1/2 yrs.
    ***** I CONSTANTLY RECOMMEND FIREFOX TO EVERYONE THAT IS EITHER MY CLIENT -- OR ANY OTHER CASUAL CONTACT *****
    ***** In fact I suggested your Browser to 3 people Today; Wed. the 14th of July 2010 *****
    Respectfully;
    Raymond E Bachelor
    aka "New System Services"
    <blockquote>Removed personal info. Please don't out yourself, or post personal info on forums. thanks! -T </blockquote>
    == This happened
    ==
    Every time Firefox opened
    == I updated Firefox to the Newest Version !
    ==
    == Troubleshooting information
    ==
    PLEASE !!!!
    SEND ME MY LOGIN INFO I have an active email entry; but I've lost track of my Username over the years !
    == Firefox version
    ==
    3.6.6
    == Operating system
    ==
    Windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6
    == Plugins installed
    ==
    *-Shockwave Flash 10.1 r53
    *Adobe Acrobat Plug-In Version 7.00 for Netscape
    *Office Plugin for Netscape Navigator
    *np-mswmp
    *getplusplusadobe16263
    *Default Plug-in
    *Delivery Network Acceleration by BitTorrent™
    *Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
    *Npdsplay dll
    *DRM Store Netscape Plugin
    *DRM Netscape Network Object

    I hate it when updates break things instead of fixing them. Can't Mozilla leave well enough alone? At the very least, each new release should be tested so it works with ALL PREVIOUS extensions!
    Wait till you "update" to firefox 4 and EVERYthing breaks, including the buttons that come with it. There is no arrow next to the dropdown button, right clicking the tab bar doesn't bring up the correct menu, but one as though it were the menu bar (which is missing) and the information bar is missing. True, it's fast, but you'll spend weeks getting it to work properly.

  • Why do some apps stop working after update to iOS 6?

    I notice one of my apps stopped working after the iOS 6 update, in particular Uno HD, which I paid $5 for.  Why did this happen?

    I had solved the problem by installing the free app, which seemed to reset something, then I deleted the free app, and the paid version continued to work until the next day.  I was going to show one of my friends the game, and then it once again would not open- the same problem was back, as soon as I went to open it, it crashed back to the desktop without opening the game.  I had to re-install the free version again, and for a while, neither version would work, but then after a while, it started working again.  I guess I have to leave the free app installed or I won't be able to use the paid version of Uno.
    EDIT
    Just checked again, took the Uno app out of resident memory by double-pushing the home button and holding the app icon til it starts to shake, and then hit the minus symbol, which deletes it out of resident memory.
    Went to open it again, and it of course crashed back to the desktop again.  So there is some issue with it that is making it unstable.
    I have to keep pushing on either one of  the app icons continuously until one of them starts, and then the other one will start.
    Gameloft needs to do an update.
    Message was edited by: Sonic Bodhi

  • Apple av adapter does not work after updating ios 5,01

    apple av adapter does not work after ios 5,01. no video on vga monitor. sound goes out on iphone 4 also.

    Thank you for your interest. Last night i tried again. It worked. there is still problem, so i could find out it that monitor is going to power saving mode then voice goes out and no view on monitor. I changed the power saving settings. And worked well. Thnx again.

  • Send Link and Mail To are stop working after update to FF v.13 on WinXP

    Send Link and Mail To where stopped working after upgrade to FF13 on win XP. I'd appreciate any suggestions.
    Thank you in advance

    Can you check to see whether your mailto setting got changed?
    orange Firefox button ''or'' classic Tools menu > Options > Applications
    In the Search box above the list, type or paste '''mailto''' and pause while Firefox filters the list. On the right side, you can select your mail application. Unless it's missing. Are you able to establish the connection?

  • TS3048 Number pad on extended keyboard stopped working after updating to OSX 10.9.1. Testing keyboard on old system still works perfectly.

    Expanded keyboard stopped working correctly after updating my system from OSX 10.8.6 to OSX 10.9.1 and now 10.9.2. The keypad numbers do not work although the numbers along the top of the keyboard work fine. Moving the keyboard back to computer still using 10.8.6 and it works fine.

    See if zapping the PRAM works.  Check out KB Article:  http://support.apple.com/kb/HT1379 Resetting your Mac's PRAM and NVRAM 

  • Iphone 5 stopped working after updated to IOS 7.1

    I have just updated my iphone 5 to IOS 7.1 and unfortunately it stopped working. I can not turn it on. Anyone got the same problem? My phone is already out of warranty so I have no idea how much it would cost to fix my died phone

    My sons iPhone 5 did the same thing after updating to iOS 7.1.
    You may have to connect the device to a computer running iTunes and do a restore on the device. Restore as new. If you don't have a backup everything will be lost but you may get the device working again.
    http://support.apple.com/kb/ht1414

  • App store stopped working after update mavericks

    After I installed the new operating system 10.9 (mavericks) on my MacBook Pro, the App store stopped working properly after the update: I can not update apps and can not download apps! - (nothing not free apps or paid apps )
    This is want I got :
    "We could not complete your purchase.
    Failed to verify the preflight file. It is not signed by Apple."
    my macbook pro 2012 retina  15'

    Launch Keychain Access, go to the preferences, click on the 'Certificates' tab, and make sure both of the options are set to Best Attempt.

  • Photo stream stopped working after update

    Installed the 6.0.1 update on my 4s and all of a sudden Photostream stopped working. It did work for two or three days after the update but then stopped. The iCloud panel on my pc is grayed out. The phone itself has everything regarding Photostream turned on. Any suggestions besides restarting Photostream and losing the photos already in there? I am running Windows 8 on the PC...(Piece of CR*P)

    You have probably enabled iCloud Drive on one of your mobile devices after upgrading to iOS 8. Then "documents in the cloud" will no longer work. Unfortunately, the upgrade to iCloud Drive cannot be undone. You'll have to wait for Yosemite.
    See this link: Be aware, be careful, be prepared for iCloud Drive | TUAW: Apple news, reviews and how-tos since 2004
    And this:  iCloud Drive FAQ
    While you are waiting for the Yosemite release you could sync your iWork documents with Dropbox.
    As to My Photo Stream:
    The new Photos.app stores the photos differently. There is no longer a Camera Roll, and My Photo Stream is no longer visible as a separate album. You will find the Photo Stream photos in the "Recently Added" album.
    See this Help text on how to access the Photos in iOS 8:
         Get help finding your Photos in iOS 8

  • Itunes stops working after update windows 7

    I am using Windows 7 64 bit and recently updated to itunes 12. After a few minutes itunes crashed with the "has stopped working" message. I have reinstalled, created a different user account and got rid of all other Apple programs all to no avail. I even reinstalled itunes 11 but it would not recognise my library. This is driving me mad. Seems I'm not the only one. suggestions please!!

    I'm going to ask the hosts to move this to the windows part of the iTunes part of this forum. YOu'll stand a better chance to get an answer there than you will here.

  • MBP Keys 1 to 9 stop working after update to 10.9.5

    Hi,
    I just update my MacBook Pro 13" mi-2012 10.9.4 to 10.9.5
    Keys 1 to 9 (and associated special characters) are having problem to work. I was typping and they just stop working. When I press keys 1 to 9 a lot of time, they start working again for few seconds, and stop again.
    It's very annoying
    I've tried everything I could find on Apple Support (like http://support.apple.com/kb/TS1381), but the problem is still there. I've tried also to restart the computer, and to change session. Same problem.
    Keys worked just fine before the update to 10.9.5
    Is anyone knows or has this problem ?
    Thanks.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Maybe you are looking for