Apple TV3 with Apple remote

How to control volume in Apple TV3 with Apple remote?

you cannot, you need to use your TV/speaker remote or get an all-in-one remote like the logitech harmony ultimate

Similar Messages

  • I am going to buy a second Apple TV. When I turn on Apple TV with the remote app, will it activate both Apple TV boxes or will it allow me to select the one I want to operate?

    I am going to buy a second Apple TV. When I turn on Apple TV with the Remote App, will it activate both Apple TV boxes or will it allow me to select the one I want to operate?

    The remote app will distinguish between the two Apple TV's, you won't need to pair it, it will only control one Apple TV at once.

  • Can i setup airplay on my apple tv with apple configurator

    Hello
    Can i setup airplay on my apple tv with apple configurator?

    Arris NVG589
    This is a full modem gateway router.. so it should always stay as the main router.
    i put the tc on bridge and now the ethernet cable is blinking amber at the ATT modem.
    The setup as far as you have described it is correct.. but the ethernet link is apparently down.. this is a common problem on the AC model TC.
    Can you give me the actual TC model as well.. sorry I should have asked in the first post more explicitly.
    If it is the tall AC one just say.. AC.
    Do you have the ethernet cord plugged into the WAN port of the TC.. ?? Please move it to any of the LAN ports.. see what happens.. it should link and have a solid green light on the TC port and the Arris..
    Your TC should pickup an IP from the Arris and should have no problems.. or minor ones..
    Please give me the summary screenshot from your TC..
    It should look like this.

  • How do I set up used Apple TV with lost remote?

    I just moved and purchased the previous tenant's Apple TV. However, she had lost the remote so I do not have one. How can I set up the tv?

    You will be unable to setup the Apple TV without a remote. One can be purchased through Apple or any authorized reseller.

  • Can I use non-apple earphones with radio remote?

    I have a new Ipod 3g and want to buy the radio remote. Must I use the earbuds supplied with the radio remote or can I use non-apple earbuds and earphones? Will I still get good radio reception with a non-apple earphone?

    Yes you can. I use Sennheiser PX100's and they work just fine.
    Plug the headphones into the remote rather than the iPod to get the best reception.

  • I have a apple tv with no remote but i have a ipod touch ..how can i turn on remote sharing on my apple tv with no remote?

    i have a apple tv ipluged it into my big screen i turned on home sharing on my itunes and on my ipod touch but i dont have a remote to my apple tv so i can turn on remote sharing so it will reconize my ipod touch ...??? can anyone help?

    I think if there is a way to program a different remote first like a direct tv remote, then you could turn on home sharing and then use either that universal remote or the IOS device. I cannot figure out how to program my direct tv remote for my apple tv though.

  • Problem wireless connection Apple TV3 with wireless router.

    apple tv version 3 connection to dd-wrt based router.  Can not get pass the wireless password screen authentification.  Have broadcast on, WPA2 personal with both both tkip and aes turned on, MAC filter off. 

    Hello DrKahanamoku
    Start with the article below to troubleshoot issues with connecting your Apple TV over Wi-Fi. The second article will also give you more settings to check against for a proper connection.
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Regards,
    -Norm G.

  • HT3180 I followed instructions above for  Apple TV with aluminum remote.   Still no response.  Screen is black.  Apple icon appeared briefly then went back to black screen.

    I cannot access Apple TV.  I restarted using the instructions to press menu and down together.   The apple icon appeared briefly and then the screen went black.   What can I do to restore Apple tV?

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • I have use Apple TV with the remote app on my iPad 4 and my iPhone 5 I reinstalled the app on my iPad but the gestures do not work

    I have been able to use my remote app from my iPad4 and my iPhone 5 until recently. I can connect and the tap to select works fine. But the app stopped responding to hand gesutres to navigate the ATV screen. All my software is updated to the latest versions. I deleted the app from my iPda and reloaded it from the app store. I turned off all my devices, including my router before reinstalling the app. I did not unplug the ATV. The app will activate the ATV and tapping menu brings me to the main screen but I cannot navigate the screen at all.

    It reboots it but unplugging can also rectify communication issues like this. A restore would be the next step.

  • Video Playback Issues With Apple TV3 Running OS8

    I have two Apple TV3s (Both Pre 2013)
    One updated today to the latest OS8, the other still running the previous OS7.1.2
    Now when trying to play virtually any of my own MP4 videos the OS8 firmware version Apple TV3 refuses to play the file.
    Apple TV simply displays "An error occurred loading this content" (retrying simply displays the same error again)
    If I then use the second Apple TV3 (running the older firmware OS7.1.2) and try to play exactly the same files from the same iTunes library the file will play back correctly.
    So far the OS8 Apple TV3 is unable to play over 95% of the video files it could previously play prior to the firmware update.
    The odd file will play but these files are of differing resolutions so don't appear to share anything in common. It is always the same files that will or wont play.
    All video files are Profile 4.0 or lower and contain the required audio tracks.
    I am running iTunes 11.4.0.18 (Windows 8.1)
    Prior to the update every video file played correctly (on both Apple TVs) and the second Apple TV3 (using the earlier OS7.1.2 firmware) still plays the exact same files correctly.
    Music files are unaffected and playback correctly on both Apple TV3s.
    The latest firmware update appears to have corrupted the video playback of the Apple TV3 in some way.
    I have even tried a complete USB restore of the OS8 Apple TV3 but this has made no difference.
    Has anyone else experienced MP4 playback issues since updating their Apple TV3 to OS8?
    Thank you in advance.

    After further tests it would appear that Apple TV 7.0 (OS8) firmware is unable to play any video file with NO CHAPTER markers.
    If I use MetaX to simply tag an unplayable MP4 file with a single chapter, that file will now play correctly using an Apple TV3 running Apple TV 7.0 (OS8). If the single chapter is then deleted the same file reverts to being unplayable.
    In previous versions of Apple TV firmware any video file with NO CHAPTER markers could be played correctly and the Apple TV would automatically generate chapter markers at equally distributed time gaps.
    For some reason Apple TV 7.0 (OS8) firmware appears to have removed this auto chapter marker feature so if a file has no chapter markers the Apple TV will now consider the file as invalid.
    With MetaX it is possible to manually generate additional chapter markers so you can still skip through the file rather than only scan.
    iFlick for Mac should I suspect be able to do the same thing.

  • Apple tv3 placement

    Hello,
    I have recently purchased an apple tv3 with the intention of placing it on top of my Bose wave ii sound system (which generates no heat) as I have no space elsewhere. In the manual it says do not place on top of any other electrical item. Why is this? From what I can see the heat comes out the top and it does not generate much heat anyway. My other question is if I cannot have it on top of the Bose, could I have it on its side or would this cause any problems?

    I couldn't say for sure whether using ethernet will eliminate all potential problems of stacking the unit on top of another electrical device. However, I suspect it would significantly reduce any potential problems.
    The Apple TV has no moving parts, it won't make any difference whatsoever which way around it is placed, so long as you still have line of sight for the remote to work. I suspect the best solution to your problem would be to install the Apple TV on its side if you can do that as opposed to on top of something else.

  • Regristration with Apple

    Is anyone else having problems with the registering Apple TV with Apple? i have been trying for two days and all i get it "We are experiencing technical difficulties, please try again later". I got one registered a couple weeks ago but having problems with my second unit.
    Any advice is very much appreciated.
    Thanks.
    Yuval

    Thanks, tzbikowski
    I didn't realize that the USB was only for servicing. Curious.
    Optical likely isn't an option for the stereo, unless I found some sort of optical-input DAC, which I don't currently have. (I can now go USB to HagUSB for S/PDIF input to my Resolution Audio DAC, or AirTunes via Airport Express analog to standard inputs on the pre-amp.)
    My idea was to be able to view, say, concert videos on/with the Apple TV, with the sound coming out on the stereo. I have a 5.1 setup for the TV, but the stereo rig sound sooo much better.

  • Is Apple Pay with watch & 5C available in Australia yet?

    With passbook on 5C, there is no Apple Pay available, so how do you use your watch to Apple pay using your iCloud account credit card details when paired with a 5C?

    See the link below for information on setting up Apple Pay on a Apple Watch.
    Set up and use Apple Pay with Apple Watch - Apple Support
    You would still need to have a credit/debit card from one of the participating issuers, which are all US based at this time.
    Apple Pay participating issuers - Apple Support

  • Solved IOS 6 issue with headphone remote

    Upgraded my Iphone 4S to IOS 6 and my Klipsch headphone remot would not work.  Volume buttons worked, and the center button would start playing music, but it would not stop or pause the songs.  I tried my original Apple earbugs with the remote and did not have any problems.  The I used the Klipsch again, and now they work great.
    Sounds strange, but that is what happened.

    Hi All,
    I was facing all sorts of issues with my earphone controls.
    This solved my problem.
    Double click home button. (press twice).This will show you all the apps that you have currently open.
    Long click on the 1st app in the list [about 3 seconds]. This will make the icons wiggle and show a red minus sign on the left hand top corner.
    Scroll [right] to see your music app (if you can't see it already).
    Press the red minus sign. This will completely close the music app.
    Restart your music app and things should be back to normal. [I also would close all other app in the same fashion, just in case, cause things like youtube apps use the controls on your earphones as well. ]
    In short: - kill, kill-em-all and restart your music app.

  • Remote app on iPod touch and iPhone will not pair with Apple TV

    I have an iphone 3G and ipod touch with the remote app installed. I am unable to pair either with my ATV. When I go to remotes on my ATV and remote app on either ipod or iphone there does not appear to be an option to control apple tv.

    System Requirements for Remote (Apple TV)
    iPhone or iPod touch with software version 2.0 or later
    Apple TV with software version 2.1 or later*
    * iPhone or iPod touch software version 3.0 or later and Apple TV software version 2.4 or later are required for the directional remote feature
    Here's how it works: About Remote for iPhone and iPod touch, http://support.apple.com/kb/HT1947

Maybe you are looking for

  • How to populate data in fields from the same cube

    HI Gurs, Need some help. I have a cube it has 11 key figures . Data for 7 of those is coming from another cube for rest of the 4 we need to calculate from two of those 7 fields. e.g. Field 1= Field2(First Cube) - Field3(FirstCube) Field4= Field5(Firs

  • Security warning in Plugin 1.4.0 during HTTPS applet download

    Hi, I develop a simple applet, which is unsigned beause doens't do critical operation like read or write on client File Systen. But I download it from an HTTPS web server and the certificate installed in the server is created by GlobalSign. In Plugin

  • Disc burned Idvd not working

    I have this 22gb movie that i exported using FInal cut with standard quicktime movie. IT is about 2 and half hours long. I switched my idvd settings to DL DVD but the dvd doesnt play on anything. Not my mac, not my dvd player, not my xbox or wii. Wha

  • My phone wont connect to wifi

    i've recently got a replacement iphone and it wont connect to wifi, i had a text sayong that my wifi settings had been rest and that i needed to register my phone, i have done this and it still wont work, someone help!?! one minute it says it is conn

  • ABAP Vs Object oriented programming

    Dear Friends, Its been almost 5 years I'm working as ABAPer. I have worked in almost all the areas of ABAP Programming except ABAP Objects(other than using ALV functinlaity some times). I was trying to understand SAP's objects and the more i read or