Apple update not seeing Bootcamp 3.1 (WIN 7, 64 BIT)

ok i have this problem for a while now. I look in my "programs and features" the the control panel and it says im updated to 3.1 but when i run apple update it tells me i need to download and install 3.1. i have uninstalled and reinstalled the 3.0 from my snow leopard disk multiple times. i have a imac early 2009. also if anyone know what is going on with the sound problems with the system please help i miss my internal speakers on the windows side(sounds like the speakers are low and cheap)

well i finaly got the new 3.2 update and everything updated for the first time i run apple update and nothing comes up thanks apple for fixing that issue.

Similar Messages

  • Itunes not syncing with iphone & apple tv not seeing itunes

    Recently installed itunes 10.4, now itunes wont sync with iphone and apple TV 2 cannot see itunes on a wired network.  The error message says Apple Mobile Device has not started - confirmed that apple mobile device did start.  With upgraded itunes apple tv cannot see the itunes library on a wired or wireless network.
    Reinstalled itunes several times now, and nothing changes.  Using pc, windows vista, outlook 2007.
    Any suggestions on how to fix these problems?

    Sure it's selcted, it's just not being stored in my iPhone's iTunes library as its stored on my macbook's iTunes library. I've dragged it to where I want it and it still won't store. I havne't needed to connect them with a cable since late last year I think with the new iTunes and updates, and you shouldn't have to. But this is frustrating, I finally found a way to get Tool on iTunes and I can't get it stored on my iPhone.

  • Apple TV not seeing all my iPhotos

    My iPhoto library is organised into events and I have also created some albums of Favourites and Latest.
    Apple TV does see all these events and albums but NOT all the photos inside them.
    For example my Favourites album has over 1000 photos in. Apple TV only sees 76 of them.
    Same problem on all my folders.
    Also Apple TV WILL NOT display any of my images as a screen saver.
    I have made sure that all events and albums are selected via the iTunes Home Sharing menu.
    Viewing family photos is one of the main reasons for purchasing the Apple TV.
    Any advice or help is most welcome.
    Thanks

    Have you examined the photos for any obvious differences. Have you tried anything yourself such as repairing permissions on the photos.

  • 2nd gen apple tv not seeing entire iphoto library

    Here's something weird - anyone know why I can't see my entire iPhoto library on my 2nd gen. Apple TV?
    I have my entire library shared in iPhoto
    I have home sharing turned on in iTunes and am signed in using my Apple ID on the apple TV
    I see my whole iTunes library and am able to stream movies etc to Apple TV
    What's weird is only certain (two) events show up in the Photos section under "Computers"  but when I select computers/photos it says "my iTunes."  ALSO, when I go to iTunes/devices on my computer, I don't see my 2nd gen Apple TV listed - only my 1st gen Apple TV...
    Any ideas out there, Apple Gurus???
    Thanks!!!

    You select the photos that are shared to your Apple TV from the advanced menu in iTunes.
    Apple TV 2 is not intended to show up under the devices list in iTunes.

  • Wired Apple TV3 not seeing 2.4GHz on dual band router

    I have an iPhone 4 that will not airplay to my apple TV. The iPhone 4 operates on my 2.4GHz band of my dual band router (netgear WNDR3700) The SSID for 2.4 is network and the 5ghz is network-5GHz. Am I to believe that these both must be the same name for the Apple TV to see it? I don't understand why it has issues since my ATV is wired and not using wireless and my 2 iPhone 5, and iPad 2 have no issues AirPlaying. (all on 5GHz) Shouldn't the fact that it is wired mean that it should see any device on my network? I have searched the forums and have not really found and issue like this, so I do apologize if there is one out there that I did not see.
    Thanks for any help, this is really bugging me.
    Casey

    Alos I just switched my iPhone 5 to 2.4GHz and it worked. Looks like it might be just an issue with my iPhone 4. Weird....

  • USB Device Not Recognized (IPod Touch 5g) (Win 7 64 Bit)

    I have seen many threads for this but nothing that they suggest has fixed this for me.
    http://i165.photobucket.com/albums/u45/JediJake2429/Capture_zps9d26bcea.png
    I have an I touch 5g Model MD724LL/A, IOS 7.1.1
    I have two Win 7 64 Bit Machines.
    I tried two cables,
    I tried two computers,
    I have restored it,
    I have put it into recovery mode,
    I have uninstalled all apple software, and removed all traces from the registry,
    I have done a fresh install of Itunes on the laptop which had never had it on there before,
    I have ran the windows troubleshooter, and the Microsoft fix it troubleshooter,
    I have removed all traces of the ipod driver and tried updating,
    I have updated the driver from the itunes folder on my pc,
    I have tried everything listed here: My iTouch 5th generation is not recognised by my computer. why?
    I have tried everything listed here: Windows 7 blocks my iPod Touch
    I have tried everything listed here: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/ipod-touch-5 th-generation-not-recognized/85dac803-680e-4ce8-842c-9f58b0df7f7f
    My wife even took it to the apple store today and they told me that it is a windows 7 issue. they basically would not do anything for her.
    Funny thing is, after trying everything that was suggested to me online, by those at the apple store, and using my own PC knowledge as I also work in IT, it still does not recognize the driver. So it seems to me that Apple need to get their drivers updated to be compatible.
    I currently have a $400 piece of crap Ipod that I cannot use because apple cannot make a driver that works.
    Anybody that has anything new to suggest, be my guest.

    Illaass,
    It works connected to another apple device. I have TWO windows 7 64 Bit Machines both with widely different configurations, and they both have the same exact issue. This IS a driver issue, that much I agree with apple on. However its not a WINDOWS issue. APPLE makes the driver that is installed with Itunes. That Driver does not work. (As a side note, Apple really should get their head out of their A$$ and come up with better solutions vs telling their customers to restore their windows config. That's straight up BS.)
    JEM24,
    I have done that. I have also taken a PC that had never had any apple software on it and installed itunes on that. Tested, same result.

  • Adobe Air not allowing "restore window" in Win 7 64 bit???

    I have a very nice flex based program that I am currently marketing.  A client recently bought a laptop with Win 7 (64 bit) on it.  My prog loaded fine, as well as the latest version of Air. However, as the prog was running and the client minimized the window, it failed to "restore" to the desktop.  It will now not restore even after rebooting the laptop.  we have installed this program in every other type of OS/System combo we know of (read Microsoft/Mac systems, not Linux) and it works fine.
    Our company hired professional programmers to build this app, and we have marketed it extensively to a select clientel list in the upper level of music and performance.  Our company depends on Air to suypply the platform for our prog.  Does anyone have an answer to this?  We would love to send you a gift certificate for a steak dinner if your answer works...:)
    PS: You can talk to our programmers if needed.  WE really need this bug fixed.  They say it's Air and not our prog, as it works well with any other OS, etc.  Any help?
    Thanks all!!!
    [email protected]

    Hi,
    Can you provide a download URL of this application?

  • Apple tv3 not seeing homeshared PC since itunes update

    My 2 Apple tv 3 devices worked perfectly with homeshare until I updated itunes on my W7 laptop.
    Now they do not recognise the PC. I've checked identities, restarted all hardware including my router, shut down firewalls etc. etc. nothing works.
    Netflix, mirroring etc. all work perfectly.
    When will this be resolved?

    Steve Join the club. Read to the right of this page under more like this. Its not just you. Tons of people are complaining the same thing and having the same problems. Some have to uncheck the box(homeshare) and check it again to see it. Me, its when itunes is closed or computer asleep. I have to restart itunes to see it everytime i load up the apple tv(pc). Macbook i have to close itunes and restart it to see it. Its an apple thing to fix(has to be). No Deff Solution Yet!

  • Windows update - Not seeing all types of updates when checking

    My problem is at one time, our 2008 R2 servers were all in a separate OU as all other machines and we had a GP for all of our Windows 7 machines to get updates from our WSUS.  Well, someone applied that policy to the whole domain which made the server
    OU inherit the WSUS policy.  Before I was in the position to manage our servers, previous admins would disable the policy, perform a gpupdate /force on each server and then download and install updates.  
    I fixed this in group policy so that the servers can go out to the Windows update site and get updates but I am not sure they are getting everything they need.  For example, I have an Exchange 2010 server which needs some security patches based on a
    scan with MBSA.  One id UR 8 for Exchange 2010 SP2 and one for  SP2 for MS Office 2010 filter pack.  They are both security which I would think should show up when checking for updates. I also have some servers that are missing SQL 2008 security
    updates along with Visual C++ 2008 and Visual Studio 2008 security updates.  They aren't showing either.
    Is there a way to check on each server where it is going to check for updates?  I have looked in some places in the registry but I can't find anything.  Below is a couple of screen shots to show what it looks like on the Exchange server.
    David Hood

    Have you enabled "get extra updates from Microsoft" ? (this enables product other than Windows, to get updates)
    If you are seeing updates for Windows, but not updates for Exchange nor SQL - then it's likely that those updates are not being published to WU/MU.
    DUH!!!, I did a face palm when I saw that first line.  Didn't even cross my mind to look at the log.  I did find where it is going to the Microsoft site to search for updates. 
    Nevermind!!! Had a brain fart.  I just saw the link at the bottom of the Windows update page on the server where is says "Get updates for other Microsoft products.  Find out more".  I clicked the "Find our more" link and
    it took me to the Microsoft site to install Microsoft update.  I did that, it ran another check, and BOOM, all my updates are there.  I spent a while on this issue this morning and couldn't find anything.  I feel a little stupid now, haha. 
    Thanks for the ultra fast responce though.  It helped me alot. 
    David Hood

  • Apple updates not working in Yosemite

    When I go to app store, updates, they won't download.  Apple IMac late 2008, Yosemite.  How do I remove the updates from the list? or fix the problem.

    i have found the problem ... is the firewall
    after the update in the option the process "discoveryd" is disable and this make not visible the apple tv 2 with yosemite

  • Subquery in update not seeing parent value

    Hi all,
    I'm working on a complex update statement that I will try to state as simply as possible.
    update table1 x set value1=(select value1 from table1
                                            where acct_num=x.acct_num
                                            and trans_dt=(select max(trans_dt) from table1 where acct_num=x.acct_num and [many more conditions])
                                            [and many more conditions]All of this is working fine. Where I reach the problem is when I need to add a condition to verify a field is not the same as the previous field in the table (if one exists), so I try this code I found online (and it works fine when I try it with test data)...
    AND vend_id <>  NVL((SELECT vend_id FROM (SELECT c.*, ROWNUM rnum FROM (SELECT * FROM table1
                                                                  WHERE acct_num=x.acct_num
                                                      AND trans_dt<x.trans_dt
                                                            ORDER BY trans_dt DESC) c
                                                         WHERE ROWNUM<=2)
                                          WHERE rnum>=2)
                            ,'XXX')but when I try to run it in the update query, I get an error, "x.trans_dt" invalid identifier. This is just another condition to what was posted in the first code block and Oracle "sees" all the x.* values there fine.
    Can anyone tell me what is wrong here and how I can pass these values into this condition?
    Thanks!

    <tt>x.trans_dt</tt> and <tt>x.trans_dt</tt> are just nested too deeply (can only be on next level)
    AND vend_id <> NVL((SELECT vend_id
                          FROM (SELECT c.*, ROWNUM rnum
                                  FROM (SELECT *
                                          FROM table1
                                WHERE acct_num = x.acct_num
                                  AND trans_dt < x.trans_dt
                                ORDER BY trans_dt DESC
                                       ) c
                        WHERE ROWNUM <= 2
                         WHERE rnum >= 2
                       'XXX'
                      )use <tt>merge</tt> to do the update
    Regards
    Etbin

  • Apple updates not functional

    Imac core 2 duo running snow leopard 10.6.8. Tells me about uploads (airport, java and itunes, I think), then downloads, then cannot install due to "unknown error". Always. Even if I try one at a time.  Happens every time, for a week now. How do I stop this?

    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

  • Adobe Design Premium CS5 updater not seeing recent DW CS5 update... why?

    Hi,
    I know that an update for CS5 DW was released yesterday but when I open the CS5 updater it saw the update available for Adobe Camera RAW but NOT the one for DW.  Why?

    I wonder why they played it that way?... puzzeling.

  • Updating nvidia 8800 GS driver in win xp-32 bit

    I was able to update my driver to version 180.48 and to version 180.84 using the official nvidia drivers for the 8800 GS. And both seem to work fine, both recognize the specifications of a 8800M GTS apart from the name.
    I was unable to update using the official 8800M GTS driver (for those who do not know the 8800 GS in a imac is supposedly a 8800M GTS: http://en.wikipedia.org/wiki/GeForce8_Series#8800GS)
    And if you look at this document http://support.apple.com/kb/HT1999 you will notice that the name of the driver is 8600M GT.
    There is an option on the nvidia driver download site that scans your computer to tell you which graphic card you have: 1st time I it told me that I had a 8800M GTS then every time after that it told me that I had a 8800 GS.
    So which graphic card is it?
    If I'm using the wrong driver how come it works?
    If I'm using the wrong driver am I losing performance?
    This may be connected to the issue maybe not in anycase it's strange: ff you go to http://www.nvidia.com/page/apple.html the title of the page is: "NVIDIA GPUs Power Apple MacPro and iMac" but within the page it only mentions "NVIDIA GPUs Power Apple Mac Pro, MacBook Pro, and Apple TV" nothing about nvidia and iMac whereas it is in the title of the page!

    try this thread for XP driver info
    http://h30434.www3.hp.com/psg/board/message?board.id=OS&thread.id=12776
    I am an HP employee
    Knowledge is power...Power to the people

  • I updated my T61 from VISTA to win 7 64 bit now thinpad recovery current ver wont install

    i did a clean install of WIN 7 64 on my thinkpad  T61 7664-17u. I put thinkvantage toolbox, other thing son, but it wont take the curent 64 bit version restore and recovery 
    i get error message as seen below:
    rescue and recovery does not support installing from the operating system which upgrade from a legacy preload system
    version i am trying to install is z936_setup_rnr450_025c. Any idea on what version i can try to install?

    I don't use rescue and recovery personally, but I think I can at least explain your error message.
    Your recovery partiton contains a different OS then you have installed, so rescure and recover cannot use it to fix any problems or do  a system restore. The only way you coud is if you did a system restore from original setup discs for the OS your using, which probably don't exist. 
    There may be other options within this program that can help you. I recal reading that it can image your drive and do a restore that way, but as I mentioned, I use other methods of restore so I don't have a solution for you..
    There are 3rd party tools that can create restore images of your windows partiton, many use this method. My personal preferrence is to have a partition where I instal a second windows version. Doing a system restore is destructive of data and takes time, where a second OS can be accessed in a couple minutes. I also keep my windows partition small so it can be imaged and saved in a separate partition and I don't store any of my data in it, that way if I ever have to restore by reinstalling windows or re-imaging the partition, none of my data is lost, only what is in the C: drive is effected. I personally feel this is far superior to a hidden partition who's only purpose is to install windows. This data can be stored on optical discs and the harddrive space can be put to better use.
    My 
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Maybe you are looking for