Apple USB CDC Driver for 10.9?

Does Apple have an updated USB CDC driver for 10.9? The package for 10.8, AppleUSBCDCDriver-4.1.24.pkg, doesn't seem to function on 10.9.

You can find the drivers in the following location.
Disc: Mac OS X Install DVD (The one used for installing Bootcamp)
Folder: \Boot Camp\Drivers
Exe: MotorolaSetup.exe
Modem: Motorola SM56 USB Data Fax Modem
Also, you may need to change the compatibility to "Windows XP (Service Pack 3)" so it will install properly.
Hope this will help.

Similar Messages

Apple USB Modem driver for Windows 7?

I installed Windows 7 on the boot camp partition. After running Boot Camp software update 3.2, all the windows drivers loaded except for the Apple USB modem. Does boot camp v3.2 support the Apple USB modem in windows 7?

You can find the drivers in the following location.
Disc: Mac OS X Install DVD (The one used for installing Bootcamp)
Folder: \Boot Camp\Drivers
Exe: MotorolaSetup.exe
Modem: Motorola SM56 USB Data Fax Modem
Also, you may need to change the compatibility to "Windows XP (Service Pack 3)" so it will install properly.
Hope this will help.

Is there an Apple USB Modem driver for Win7?

Does anybody have any ideas?

You can find the drivers in the following location.
Disc: Mac OS X Install DVD (The one used for installing Bootcamp)
Folder: \Boot Camp\Drivers
Exe: MotorolaSetup.exe
Modem: Motorola SM56 USB Data Fax Modem
Also, you may need to change the compatibility to "Windows XP (Service Pack 3)" so it will install properly.
Hope this will help.

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

I have an older iMac 5,1 and the disc drive no longer works. I was hoping that I could the Apple USB super drive as a replacement, but the info on the super drive page says compatible with iMac 2012 or later. Does anyone know why it would not work for me?

A reply to similar question (Q & As , in product page Apple Store) says:
"...dissable the internal reader hardware from devices setup. Then plug the external usb superdrive and that's it." Answered by Enrique T from Lima Oct 25 2013.
If you can locate an external Apple USB 'Air" superdrive for earlier model MacBook Air, that should work. The newer one for the Air is the same as for iMac, now.
You may be able to use other brands of external USB optical drive with your older intel-based iMac, as some of them function capably. A few should also be able to see system discs or other bootable utilities on DVD.
Hopefully this helps.
Good luck & happy computing!

CPU is very hot when using Thunderbolt display and mac attached USB hard drive for TimeMachine

Hello,
i've bought the new MacBook Pro 15" and a Thunderbolt display. Everything works fine for me due to the latest updates, but i experience an issue which i really don't understand. When i connect an usb hard drive for TimeMachine to my display it works like expected (CPU has a temperature of 64°C), but when i connect it to an usb port of the mac while using my display the CPU temperature goes crazy (spikes about 80°C) and it gets very noisy. Has anyone else experienced this behaviour?
May this has something to do with the dual graphics adapter and how the system handles the data stream to thunderbold ports and usb devices? Which graphics card is used for the external display, the internal gpu or the adapter from ati? I've googled a lot but haven't found appropriet answers about these questions.

Hi there ulairi9!
I understand how this would be a frustrating issue! I have an article here that can provide some troubleshooting steps for you, and can hopefully help you resolve the issue. That article specifically addresses the issue you are experiencing, and can be found here:
AirPort Extreme and Time Capsule: External USB drive becomes inaccessible
http://support.apple.com/kb/TS3271
Thanks for using the Apple Support Communities!
Cheers,
Braden

How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
   Paul

i get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First           : 0x4001c001
DLL Last            : 0x41c7c0d8
Physical First      : 0x84001000
Physical Last       : 0x863bbdec
Num Modules         :        294
RAM Start           : 0x863c0000
RAM Free            : 0x863d5000
RAM End             : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files           :        116
Kernel Flags        : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start   : 0x00000000
Driver Glob Length : 0x00000000
CPU                 :     0x01c2
MiscFlags           :     0x0002
Extensions          : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18    0x9     0x25    0x0     0x0     0x0
Row 1: 0x26    0xd     0x28    0x0     0x0     0x0
Row 2: 0x27    0x24    0x23    0x0     0x0     0x0
Row 3: 0x0     0x0     0x0     0x0     0x0     0x0
Row 4: 0x0     0x0     0x0     0x0     0x0
Row 5: 0x0     0x0     0x0     0x0     0x0     0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
        Height = 0x280
        Width = 0x1e0
        HSW = 0x20
        HFP = 0x8
        HBP = 0x17
        VSW = 0x1
        VFP = 0x4
        VBP = 0x3
        DVI is not enabled
        PixelClkDiv = 0x7
        LogClkDiv = 0x1
        ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed.

Can I use a usb thumb drive for Time Machine?

Can I use a usb thumb drive for Time Machine backups?

Hello,
Yes you can use a (large) thumb drive. The most common format for a Time Machine backup drive is Mac OS Extended (Journaled).
Hope this will help.

USB super drive for a MacPro retina. It recognizes CDs but not DVDs.

I bought a new USB super drive for a MacPro retina. It recognizes CDs but not DVDs. I am in region 1 and my DVDs are all region 1. This is the second drive so the problem seems to be in the computer. The problem is the same with battery power or AC adaptor. I downloaded Adobe flash before I bought the USD super drive. Could this be the problem? Any suggestions? Thanks.

MBP refers to Macbook Pro
Do the DVD spit out right away? (indicates a bad loader mech)
OR do the DVD spit out after several seconds (indicates a dirty laser diode lens) ?

S400 usb 3 driver for Windows 8

Hi Guys,
i was wondering if you could point me to a link for USB 3 Driver for the lenovo S400 for Windows 8?
I can't find it on the download link on the support page. Thank You.

Hi
Welcome To Lenovo Community
USB 3.0 drivers are actually not required for windows 8 as it will be automatically identified
If you wish you may try the following drivers Intel USB 3.0 Driver
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Apple USB Super Drive

Hi,
Will "Apple USB Super Drive" support Blu-ray DVD burning and reading?
Thanks.
Ed

How about in the future?
Thanks.
Ed

Sony USB Flash Drive for Smartphone

The USB Flash Drive for Smartphone by Sony. Otherwise identified as a Micro USB Key. Does anyone know where to get one of these??
Solved!
Go to Solution.

You could contact them for availability or you can check ebay.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

When is Apple will make a Micro USB Flash Drive for iPads and iPhones ???

IIt's really a big help if Apple make their own Micro USB a Flash Drive for iPads and iPhones.

Apple would not tell people there are other brands on the market. It is my opinion that if Apple users keep asking for the USB for ipads, they might consider it. As for the iphone there MIGHT be a tiny slot inside where the battery is for an SD card, which expands the space. I know Android has that feature in their cell phones, but not sure about Apple.

Has anyone actually used the Apple USB "rescue" drive on a 2011 MBA or Mac Mini?

I am getting conflicting information as to whether the $69.00 Lion USB "Rescue drive" will function on a mid 2011 MacBook Air or a Mid 2011 Mac Mini. (Yes, I know it will work on the 2011 MacBook Pros).
1) The local Apple Store Genius Bar personell say that it will not work. It has 10.7.0 Build 11A511, and the 2011 MBA's and Mac Mini's require at least 10.7.0 Build 11A2063 and 11A20621, respectively.
2) Several people have answered this question in the Q&A section of the online Apple Store that it will work on a mid 2011 MBA.
3) I contacted Apple, via the Chat system within the online Apple Store, and they are kinda sure that it will work. But in any case, if I were to get it to work it would ace my recovery partition, and forever NEVER let me use a recovery partition on that Mac again.
So, I am left with the most reasonable avenue to obtain a correct answer. I ask if anyone has sucessfully used this drive on a mid 2011 MBA or mid 2011 Mac Mini.

Given the nature of backups, my recommendation has always been to use a strategy that is unequivocally supported by Apple. As you already determined Apple Support unequivocally informed you that your proposal will not work, unless your router is an Apple AirPort Extreme or Time Capsule.
The exhaustive list of devices supported by Time Machine amounts to the following:
AirPort Time Capsule's built-in hard disk (any model)
External USB hard disk drive connected to a Time Capsule (any model)
External USB hard disk drive connected to an AirPort Extreme (current model only)
A hard disk drive directly connected to your Mac
That is all.
Use whatever backup device you want, but you should be aware that this site is full of reports of misery from hapless individuals who had been using NAS devices for Time Machine backups, only to find that they were incomplete, corrupted, or useless when they were required. Apple won't care if you lose your data while using a Time Machine configuration specifically excluded from their technical support documents.

HT2801 I have a 2009 MacBook with an optical drive built in. It has "spotty" performance lately, so I got a USB super drive for Christmas. Unfortunately, the MacBook doesn't "see" it. Any solutions?

I have a 2009 MacBook with an optical drive. It is becoming unreliable, and as a result, I got a USB SuperDrive for Christmas. Problem, neither my MacBook, nor my iMac (2008) recognize the drive. What's the issue? I thought I could get a few more years out of my MacBook by using an external USB optical drive.

The USB SuperDrive is only designed to work with a few Mac computers.....specificaly the ones that do not have an internal Optical Drive...
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive

Should I buy an Iomega USB Zip drive for my Mac G5?

Zip disks are handy for doing routine backup of genetal documents such as Word and Excel files, unlike CD-R's where after one use they are done and just have to be thrown away.
I had a zip drive with my old G4, but some people give the latest model of the Zip 100 bad reviews. Should I get it or not? I already have plenty of Zip Disks.

I'd recommend against it. Zips are ridiculously unreliable. For the kind of backups you're talking about, you're probably better off with a few high-capacity USB Flash drives, or using CD-RW media that you can re-write to. Either is far more reliable, and more compatible with most other computers, if you ever find yourself needing a file at a friend's house, or printing things out at Kinkos.
I know too well the clickety-clack of a dying Zip drive, and staring at now useless disks. Before I sold my G4, I transferred all my old Zips to three Dual-Layer DVDs. Safe and sound.
Good luck, and let me know it this helped.
-K

Apple USB CDC Driver for 10.9?

Similar Messages

Maybe you are looking for