Apple USB modem and MagicJack

I am ready to connect the MJ to my iMAC. Do I still need to use my Apple USB modem ?

No. MagicJack and your modem are two different devices. MagicJack is used to make telephone calls using VoIP. A modem is used to connect to a telephone outlet in order to connect to the internet via dial-up or to use your computer to send and receive faxes.
Note that your MagicJack will not work on your Mac as it's delivered. You must go here and click on the large blue box with the words "You must click here to download the firmware update." Be sure your MagicJack is plugged in to a USB port on the computer (do not use a hub.) Follow the instructions on the page. Your MagicJack must have been purchased since March 8th.

Similar Messages

Apple USB modem and snow leopard = kernel panic !

Hello,
With Snow (10.6.1) I encounter very often a kernel panic when I turn off the
Mac.
When I check the console I have this:
Interval Since Last Panic Report: 670049 sec
Panics Since Last Report: 1
Anonymous UUID: F080CD9F-6604-4AF2-82F1-D43BE33F40C5
Tue Oct 6 07:38:13 2009
panic(cpu 1 caller 0x2a6ac2): Kernel trap at 0x08090001, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x089ec400, EBX: 0x08e51000, ECX: 0x08e51004, EDX: 0x0145aff1
CR2: 0x00000000, EBP: 0x4c1ebc88, ESI: 0x087cd800, EDI: 0x00000000
EFL: 0x00010246, EIP: 0x08090001, CS: 0x00000008, DS: 0x00030010
Error code: 0x00000002
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x4c1eba78 : 0x21acfa (0x5ce650 0x4c1ebaac 0x223156 0x0)
0x4c1ebac8 : 0x2a6ac2 (0x590a50 0x8090001 0xe 0x590c1a)
0x4c1ebba8 : 0x29c968 (0x4c1ebbc0 0x8c7c9e0 0x4c1ebc88 0x8090001)
0x4c1ebbb8 : 0x8090001 (0xe 0x48 0x4c1e0010 0x4f0010)
0x4c1ebc88 : 0x1333880 (0x8e51000 0x8e51000 0x0 0x8e6b400)
0x4c1ebca8 : 0x133269d (0x8e72280 0x0 0x0 0x1)
0x4c1ebce8 : 0x133277c (0x8e6b400 0xb000001 0x3 0x2000)
0x4c1ebd28 : 0x3064df (0xb000001 0x3 0x2000 0x8dfad20)
0x4c1ebd68 : 0x30cedb (0x4c1ebdb0 0x0 0x4000000 0x0)
0x4c1ebd98 : 0x2f8b48 (0x4c1ebdb0 0x246 0x4c1ebe08 0xa80d6f0)
0x4c1ebdd8 : 0x2ee35c (0xa80d6f0 0x3 0x4c1ebed8 0x0)
0x4c1ebe28 : 0x2ee422 (0xa80d6f0 0x3 0x4c1ebed8 0x0)
0x4c1ebe88 : 0x469be6 (0x92634e0 0x4c1ebed8 0x4c1ebeb8 0x3007dc)
0x4c1ebef8 : 0x46b9dc (0x865b280 0x92634e0 0x8dfad20 0x0)
0x4c1ebf38 : 0x46baad (0x0 0xa 0x4c1ebf5c 0x1)
0x4c1ebf78 : 0x4ed85f (0x8dfad20 0x9811ee8 0x9fa62a4 0x0)
0x4c1ebfc8 : 0x29d3fd (0x9811ee4 0x2 0x10 0x82d32a4)
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.IOSerialFamily(10.0.2)@0x132e000->0x1336fff
BSD process name corresponding to current thread: pppd
Mac OS version:
10B504
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: Macmini3,1 (Mac-F22C86C8)
System uptime in nanoseconds: 5693599172824
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0x105c000, size 0x12288) - last unloaded 98582035842
loaded kexts:
com.Logitech.Control Center.HID Driver 3.1.0
com.apple.driver.AppleHWSensor 1.9.2d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.MotorolaSM56KUSB 1.5.10
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.ApplePlatformEnabler 2.0.0d2
com.apple.driver.AGPM 100.8.15
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.driver.NVSMU 1.1.7
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.driver.AppleIRController 161
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.AppleLPC 1.4.6
com.apple.GeForce 6.0.2
com.apple.driver.AppleHIDKeyboard 1.1.5f1
com.apple.iokit.SCSITaskUserClient 2.5.1
com.apple.iokit.IOAHCIBlockStorage 1.5.0
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleFWOHCI 4.3.4
com.apple.driver.AirPortBrcm43xx 410.91.20
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 3.7.8
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.nvenet 1.0.58
com.apple.driver.AppleUSBOHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.nke.ppp 1.5 - last loaded 158842070257
com.apple.iokit.IOBluetoothSerialManager 2.2.1f7
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSM56KUSBModemFamily 1.1.12
com.apple.driver.AppleSM56KUSBAudio 1.9.16
com.apple.iokit.SM56KUSBAudioFamily 1.6.1
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.iokit.AppleProfileFamily 40
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.nvidia.nv50hal 6.0.2
com.apple.NVDAResman 6.0.2
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.BroadcomUSBBluetoothHCIController 2.2.1f7
com.apple.driver.AppleUSBBluetoothHCIController 2.2.1f7
com.apple.iokit.IOBluetoothFamily 2.2.1f7
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOAHCISerialATAPI 1.2.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.iokit.IONetworkingFamily 1.8
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: Macmini3,1, BootROM MM31.0081.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 4 GB, SMC 1.35f0
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.91.19)
Modem:
Bluetooth: Version 2.2.1f7, 2 service, 0 devices, 1 incoming serial ports
Network Service: External Modem, PPP (PPPSerial), ppp0
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: HTS721010G9SA00, 93,16 GB
Serial ATA Device: PIONEER DVD-RW DVRTS08
USB Device: Hub, 0x050d (Belkin Corporation), 0x0264, 0x24700000
USB Device: EyeTV Diversity, 0x0fd9, 0x0011, 0x24730000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0x24100000
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc50e, 0x24110000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0x24120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: Apple USB Modem, 0x05ac (Apple Inc.), 0x1401, 0x06400000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000
We can see the following information:
BSD process name corresponding to current thread: pppd
so this is a bug with the Apple USB modem and snow leopard !
you know what to do?
Thank you very much for your help

up !
the problem is still there

Apple USB Modem and VoIP

I've been trying to help a friend set-up an Apple USB modem with his MacBook Pro. He wants to have it as a back-up, in case he is somewhere without any other form of Internet access. I've been using Macs for a long time and thought this would be a no-brainer, but it hasn't. I get a dial-tone, I hear the attempted connection sounds, then nothing - "dial tone not detected", or something like that. Earthlink confirmed that the access numbers were correct, plus the phone works fine. I've tried 2 different USB modems. I realized that he is using VoIP for his home phone and that the line runs through a Linksys "Viatalk" router. Could that be the cause of the problem? Are modems "supposed" to work over VoIP systems?
TIA

due to the various encoding and compression algorithms used, you typically cannot use a modem (including the modem built into fax machines) on most VoIP lines.
The VoIP connection is optimized to carry voice traffic and doesn't support the full signal range needed by modem communications.
You might try asking your VoIP provider for some assistance - some offer fax modem lines which may support modem transfers.
On the plus side I trust you are using this for testing only, right?
There's no point in using a modem as backup in case your main internet connection goes down because if your main line goes down, so does your VoIP connection - therefore you couldn't use the VoIP connection anyway.

Apple USB Modem and paralles?

would like to know if you are running a 3rd party software program in windows that requires the use of a telephone modem. The Apple usb modem will not work in boot camp and I would like to know if it will work in Paralles?

Might wanna post in the correct forum. This is for the iPod Mini.
http://discussions.apple.com/forum.jspa?forumID=1153

Can't get Apple USB modem to work in Boot Camp

I've been struggling to get an Internet connection under boot camp/Windows XP for several days. Have an Apple USB modem and installed all the Apple drivers. Apple tech support says they can't help me with Windows (cop out). Both Microsoft and my ISP tech support team have both been great and have spent hours trying to help me. Their final conclusion is that the modem is working fine, but the underlying flaw is the inability of an Apple system to run Windows. In desperation, I've ordered a US Robotics USB modem from the Mac/PC Connection that is both OS X and Windows XP compatible. It is on backorder for 2 weeks
Any help you can give me in the meantime would be greatly appreciated! Glad I kept my old Dell!

"I am confused, QuickDraw. If the poster cannot get online via Windows XP, how does he or she get the drivers?"
I was speaking of the Boot Camp drivers that comes on the Leopard Disc. This could possibly be the answer to your troubles as well if you haven't already installed them yourself. After you've successfully installed Windows via Boot Camp, you need to boot up into Windows, then stick in your Leopard Disc and the drivers are supposed to install automatically. If after you've installed the BC drivers you still cannot get online via your router, then post back.
Hope this helps.
By the way, you really need to start your own thread. That way you'll have a better chance of being assisted from others. Just a suggestion.

Apple USB modem, OS 10.6.4 Macbook Pro 4,1

Since I've updated to 10.6.4 I've lost capabilities with a couple of USB items I use frequently. The Apple USB modem and the Keyspan USB to Serial adapter. Why on earth does Apple continue to abuse their user base like this ? I cannot believe that it is so difficult to support these USB devices, especially their own USB modem, even if they have discontinued selling it. This really ***. Now I have to boot off of a 10.6.3 disk to use these devices. I'm a long, long time Apple user, but this kind of stuff is really ******* me off.

Well, my bad, and I apologize to Apple. Digging around the forums a bit, I discovered the Issue with both USB devices. I had my OS set in 64 bit mode. DOH!!
Eating Crow steak now.

Can you prove Apple USB Modem supports Voice calls?

I'm developing an app using the Apple USB Modem and I haven't been able to find a single application that supports its claimed voice capabilities. Doesn any have a voice file known to be compatible with this modem? All my attempts have resulted in very distorted screeching playback. I came across one other similar experience/opinion on this modem.

"I am confused, QuickDraw. If the poster cannot get online via Windows XP, how does he or she get the drivers?"
I was speaking of the Boot Camp drivers that comes on the Leopard Disc. This could possibly be the answer to your troubles as well if you haven't already installed them yourself. After you've successfully installed Windows via Boot Camp, you need to boot up into Windows, then stick in your Leopard Disc and the drivers are supposed to install automatically. If after you've installed the BC drivers you still cannot get online via your router, then post back.
Hope this helps.
By the way, you really need to start your own thread. That way you'll have a better chance of being assisted from others. Just a suggestion.

Problem with Apple USB Modem Caller ID functionality

Can't find a more suitable area to post this, so here goes... Caller ID detection using my Apple USB Modem rarely works. I've tried several different pieces of software, including looking directly at the modem's output with ZTerm, and it's apparent that the modem is not picking up the inbound caller ID information properly most times. It occasionally reports the proper data (time,date,number,name) but more often that not, it reports RING, and then ERRM=ICLID_202. My cordless phone reports inbound CID information flawlessly using the same phone jack and cable, so I'm confident the service is working properly on the phone side.
The modem's response to an ID request (ATI1) is *Apple Version 1.5.9*.
Do I have a bad modem, need a firmware upgrade, or what? Does anyone else have similar problems? Far as I can tell, the rest of the modem functionality (outbound faxing, etc.) works fine. Thanks for any help anyone can offer!

I tried posting earlier, sorry if both show up.
I am having the same problem with the Apple USB Modem and Caller-ID functionality. I am using the modem in conjunction with Parliant's Phone Valet Home Edition, and Caller-ID fails about 15-20% of the time. Along with missing Caller-ID information, the system also doesn't pick up the line on the usual 4 rings, it takes 8 rings before it answers on those same calls. I've talked with Parliant's tech support, and in the end they basically said that there is nothing that they can do if the modem doesn't pass the caller-id information to the program. They also suggested that maybe there was a "low-voltage" issue on the line that may be causing the system to miss caller-id and take longer to pick up, even though caller-id works on every other phone and caller-id display in the house, including one hooked up to the same jack as the Apple Modem. I then called AT&T to check the line - they stopped out and ran tests and said everything was fine on the phone line side. So there seems to be a combination issue going on here - the modem doesn't register caller-id, and also doesn't seem to realize that the phone is actually even ringing until several rings in. This could be part of the problem: If the modem doesn't "see" the phone ringing on the first ring it probably just isn't even looking for caller-id info when it is being passed before the second ring.
Just wanted to add my experience, and would appreciate any ideas - I have a rather expensive answering machine that only works about 80% of the time.
Thank you, and take care!
Jeff

Annoyed with Apple usb modem

I am very disappointed in the Apple USB modem and its disconnecting probelms. I called Applecare on this, and the first thing the tech said was I should have gotten the internal modem. Yes. On an iSight iMac. I had to tell him it wasn't an option.
After a few seconds of silence, he went through a litany of things You Must Absolutely Not Do With A USB Modem. Like do not start the computer with the modem plugged in (I have no idea how one does a restart since one is also advised not to unplug it when the computer is running). Do Not unplug the modem when it is in the 'interminable disconnect loop' (I already found that this causes kernal panics which generated the call), Do Not open any applications while the modem is connecting (this causes it to immediately disconnect). Do Not plug in any USB or FW devices while the modem is running. The list went on. He also said that he would email a Kbase article on these modems and how to use them. Well, the article I got was a 2 year-old article on internal modems. No matter, it was in Japanese. No help from Applecare.
What annoys me most is that it constantly disconnects when using any app more processor intensive than Safari. I can't burn CDs or DVDs, or any Photoshop work. When it does this, it takes at least 10 minutes to disconnect if it does it at all. I was compressing some video which still had an hour left to go when the modem disconnected. I had to wait until the compression was done, so I could do a restart and get the modem to stop.
I am getting very upset about this. This modem should perform as well as the internal modem it replaced since the internal isn't an option. When I get back home from Christmas, I'll be calling again, but my first call was very disheartening, since it appears the tech sent me some arbitrary article to get rid of me.

I doubt the tech sent you an arbritary article to get
rid of you.
The fact is that USB Modems are in fact problematic
NO MATTER who the manufacture.
That being said the reason the article that he sent
you was outdated is because the technology is the
same outdated.
You must remember that the technology has progressed
well behond the 56k modems of old, and yes I am aware
that in many instances that is all one has available
for whatever reason.
That is the reason that the DSL was developed to get
away from the inconsistancy of straight dial up.
Bear in mind that the USB has shown to be unreliable
, innconsistant, and fair at best.
So the fact is that when the tech gave you the do's
and the dont's of USB modem use it was so you would
understand the problems you will face if they are not
followed.
Cheers Don
He was able to give me the information regarding all the do's and don'ts over the phone, and I doubt if he pulled the info out of a hat - so why didn't he just send me what he was reading? He gave me a litany, far more than I could remember, hence the request for instructions on (what you yourself mentioned) is a faulty device. Intructions not included in the manual btw. It seems to me that if doing a certain action, like unplugging it during an unstoppable disconnect loop, causes kernal panics, then Apple should mention it. Publish it, actually.
Mac OS X (10.4)
Mac OS X (10.4)

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

Apple USB Modem, receiving a fax, and ethernet network

I am wondering whether the Apple USB modem will allow me to configure an intel Imac such that the iMac can be connected to a network via built-in Ethernet (all, other iMacs) and simultaneously receive faxes with a phone line connected to the USB modem. I have looked for this topic and come up empty … any help out there?
Thanks

Thanks for responding.
I am trying to set up receiving faxes for incorporation into medical records. I have purchased an Apple USB modem but have not been able to figure out how to configure the modem to answer the phone (or to show up in fax/print set-up window).
I have a cable modem that is connected to a router for internet connectivity. The rest of the work stations (all iMacs) share our office software via the built-in ethernet configured in Network of System Preferences. Also within preferences, external modem is "configured, but not connected". When I try to use the configure option, I am prompted for information that I don't have or need for connecting to the internet. Clicking the Modem button displays the type of modem and other general info. Applying these settings leaves the modem "configured, but not connected". Under printer-fax set-up, I have everything filled in but when I choose the Set Up Fax Modem button, nothing shows up under Fax List. I have the very same phone line connected to the modem that was connected to my fax machine (and switching it back allows the fax machine to work).
I am running OS X 10.4.9 and have seen some threads regarding faxing issues that may be present in this version. I will try the 10.4.10 update to osee if this solves the problem but would welcome any other suggestions.

Apple USB modem no longer works with Mountain Lion

Now that I've upgraded my iMac to Mountain Lion my Apple USB modem no longer works. Does anyone know of a software fix or have I just lost my faxing ability with this item and have to buy something else?

That's a very sad situation as the Official statement link above (http://support.apple.com/kb/ht3152) states that the modem cannot be used with any Windows. So Apple thinks that people investing in the ability to Fax and relying in Apple's good product only deserves to throw out their modems (because now it is useless on any platform)...

Does The Apple USB Modem Work With The Mac mini ??????

Just wanted to know if anyone has successfully used the new Apple USB Modem with the Mac mini, is it compatable ????
Thank you for your input on this.
Mike D.

It says it works with the Mac mini, but does it really? I just received my modem yesterday and could not get it to work with my 1.42 mini - the more expensive one that comes without a dialup modem! I looked carefully at the specs and it appears the Apple USB modem requires Mac OS 10.4.3, not the 10.4.2 that comes with the Mac mini.
Talk about stupid! And the mini docs say it comes with the "latest" version of Tiger. Not! So I can download the upgrade, I guess. IF I could get on the internet! This is extremely annoying. I guess I'll have to download the upgrade on another computer and transfer it somehow. Boy, those Apple guys sure are tech geniuses, aren't they???
[ Edited by Apple Discussions Moderator ]

Please help: Problem sending fax to one recipient using Apple USB Modem

Hello,
I'm using an Apple USB Modem to send an receive faxes on my PowerMac G5. This is working great to the most recipients, but not one with a Philips fax machine.
The problem is, that everybody can send faxes to him - except of me
I'm using a software called Pagesender for this, I e-mailed the support and he told me, that the my fax is timing out and some of his customers have made positive reports of Zoom and Best Data Modems in cases where the Apple Modems have encountered line noise.
Also the Tiger fax solution doesn't work ... The odd things are, that I could send faxes using a stationary fax machine and don't have problems to send faxes to others ...
Is there really no solution for this.
Best regards
René

Hello,
I'm using an Apple USB Modem to send an receive faxes on my PowerMac G5. This is working great to the most recipients, but not one with a Philips fax machine.
The problem is, that everybody can send faxes to him - except of me
I'm using a software called Pagesender for this, I e-mailed the support and he told me, that the my fax is timing out and some of his customers have made positive reports of Zoom and Best Data Modems in cases where the Apple Modems have encountered line noise.
Also the Tiger fax solution doesn't work ... The odd things are, that I could send faxes using a stationary fax machine and don't have problems to send faxes to others ...
Is there really no solution for this.
Best regards
René

New Mini won't recognize Apple USB modem

I hate being thick but I can't figure out why my new mini won't recognize the Apple USB modem I just purchased. The network preferences see the built-in Airport card, Bluetooth, Ethernet and Firewire, but I cannot get it to recognize any kind of modem (internal or external).
I figured it might be an uninstalled component (this is the Mini with built-in Airport) and looked through the OS X installation discs, but no. I can't find any drivers on the Apple site for the modem... has anyone had any success with this?
Many thanks in advance,
m.
Mini / 1.42Ghz/airport Mac OS X (10.4.2)

Doh! Upgrading the system to 10.4.4 did the trick. I guess the right drivers for the USB modem weren't in the earlier version to be recognized.

Apple USB modem and MagicJack

Similar Messages

Maybe you are looking for