Apple vpn resolves extrenal ip automatically to name-server.local

HI
We are a small company and connect into our Xserve (when it works) via VPN. The Xserve is communicating with the internet through a netgear DSL Modem and an apple timeport (as router). It has a valid, assigned IP from our internet provider.
From our iphones everything works great. VPN established, can connect to our server and our internal wiki page. But from Macbooks or Macbookpro the VPN changes the 80.xxx.xxx.xx IP to name-server.local as we watch! If we are in the office then of course it works. This doesnt help much though when we are in the field (when we need the VPN)
Any ideas or tricks would be greatly appreciated.
Thanks
Lee

First best guess is that you have either handed out the IP of Farm1 to the VPN user connected to Farm2. Next is to check that Farm1 and 2 are in the same subnet.
Last check is that your VPN setup has a private address space setup for internal access.
Peter

Similar Messages

  • Hello, I have this problem on updating applications on my iPhone 4s 5.1.1 i dont know if you can help me with. when ever i want to update an application on apple store i get a different user name then mine(slamdance@cracked.by) this user name is not mine

    Hello,
    I have this problem on updating applications on my iPhone 4s 5.1.1 (jail broken) i dont know if you can help me with.
    when ever i want to update an application on apple store i get a different user name then mine([email protected]) this user name is not mine but its always there only on updating my app's.
    thanking you in advance for your kind help.

    Under the Terms of Use of this forum it is prohibited to discuss jail breaking. By jail breaking your iPhone you void any warranty you may have and forfeit any support from this forum.

  • TS5376 Help!  I can't fix or uninstall/reinstall iTunes without getting this error message: "The path \C\Users\(my name)\AppData\Local\Apple\Apple Software Update\iTunes64msi.' cannot be found."  So I can't remove iTunes.

    Here's the complete message:
    "The path \C\Users\(my name)\AppData\Local\Apple\Apple Software Update\iTunes64msi.' cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes64.msi' in a folder in which you can uninstall the product from iTunes."
    So I'm stuck in this loop in which I can't download an update, can't remove iTunes to reinstall, and can't use iTunes currently as it shuts down at the drop of a hat.  Am I hopeless or is there a fix I can find?

    See Troubleshooting issues with iTunes for Windows updates. Use the same advice as in note 1 but for iTunes. Try the MS fixit, or leave it in place and go to the next step.
    tt2

  • Resolved IP address from host name-PL\SQL

    Guys,
    I need to get a resolved IP address from Host name.
    ie:Input would be host name and I need to get the resolved IP address of the host as output .
    Can this be done by a PL\SQL program?
    Thoughts please.
    Thanks,
    Gabriel

    SQL> select utl_inaddr.get_host_address('www.oracle.com') from dual ;
    UTL_INADDR.GET_HOST_ADDRESS('WWW.ORACLE.COM')
    141.146.8.66
    1 row selected.
    SQL> select utl_inaddr.get_host_address('www.microsoft.com') from dual ;
    UTL_INADDR.GET_HOST_ADDRESS('WWW.MICROSOFT.COM')
    207.46.199.30
    1 row selected.
    SQL>

  • Hi guys! Can I pick your savvy brains on something: I've been seeing people having a mini version of the Apple logo displaying next to their Twitter names, looks pretty cool, how does one do that? Thanks!

    Hi guys! Can I pick your savvy brains on something: I've been seeing people having a mini version of the Apple logo displaying next to their Twitter names, looks pretty cool, how does one do that? Thanks!

    Hi guys! Can I pick your savvy brains on something: I've been seeing people having a mini version of the Apple logo displaying next to their Twitter names, looks pretty cool, how does one do that? Thanks!

  • I recently updated a app on my iPad 2.it asked me to turn on an off my iPad so I did .now every time I turn it on the apple logo appears then it automatically shuts down an do the same untill the battery's gone ?

    I recently updated a app on my iPad 2.it asked me to turn it off then on so I did .now every time I turn it on the apple logo appears then it automatically shuts down an does the same untill the battery's gone ?

    You probably need to restore your iPad now. Pay attention to the last part of this kb article where it explains about using recovery mode. You may need to restore the iPad using that method.
    iTunes: Restoring iOS software

  • Can someone tell me if Apple has resolved Security Update 2008-006 Issue?

    Hi, I'm running Tiger (10.4.11) on a PowerBook G4. I just upgraded to iTunes 9. Unfortunately, I cannot access the iTunes store unless I upgrade Safari from my current version (3.1.2) to a newer version (4.0.3 or better). I just downloaded the installer for 4.0.4 and I can't install that until I install the latest security update (currently, 2009-005).
    Now, I have been reluctant to install security updates ever since 2008-006 proved to be a disaster. You might recall the issue people had with the update screwing up their network settings (http://discussions.apple.com/thread.jspa?threadID=1712387&start=0&tstart=0). When I had this issue the only way that I could solve this was to do a clean install of my OS. I do not want to have to go through this again. Can someone tell me if Apple has resolved this issue? If they haven't, could someone tell me where I can get the previous version of iTunes so I can install that?
    I refuse to install another security update until I know that this problem has been solved.
    Thank you.

    In my humble opinion: yes, they have fixed the problem. As I posted here (http://discussions.apple.com/thread.jspa?threadID=2292768&tstart=30), I had also declined all the updates since 2008-007 (and the following Quicktime update as well) caused a piece of software that I rely on to stop working. I recently did do the install of 2009-005, Quicktime, and all the other updates, and the result was a system that works perfectly. And quite frankly, I was amazed.
    Between network settings, Finder crashing, and several other misbehaviors, a couple of the updates right around January 2009 did indeed cause heartburn for a number of people, as documented here- and more than a few of us quit accepting the updates as a result. I'm very happy that whatever the underlying causes for that misbehavior might have been, those problems appear to have been resolved since then...
    So I'd have to weigh in with a "do a really good clone backup, and then go for it!" as well, based on my recent experience.
    Message was edited by: Scott Griffith1

  • Apple TV3 doesn't start automatically when i select airplay from my iMac and Ipad 3. i have to manually turn it on then it works fine after that! what is wrong with which setting.

    Apple TV3 doesn't start automatically when I select airplay from my iMac (Yosemite) and Ipad 3( iOS 8.1.3) i have to manually turn it on then it works fine after that! what is wrong with which setting.

    You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
    https://discussions.apple.com/message/23957654#23957654
    Peace
    Harry

  • HT2476 when an app is purchsed from apple Ipad shouldn't it automatically go to IPhone apps too?

    When an app is purchased from Apple Ipad shouldn't it automatically go to my Apple Iphone too??

    It will only stay connect to wifi if your phone is connected to a power source.
    Other wise when the phone goes to sleep it will disconnect from wifi, until it is awake again.

  • Cannot DNS resolve across networks using host name only (not fqdn)

    Evening all,
     I currently run domain network (MS Server 08 - dhcp) on my firewall interface1 and WiFi network on interface2 (dhcp provided by router itself). On my Wifi dhcp I am advertising as DNS server that of the domain, but wifi clients can resolve only FQDN domain
    client names not host names ("domainclient.domain.local" - not "domainclient").
    If on my wifi client I change NIC properties -> IPV4->Advance->DNS-> append these suffixes, and put the domain.local, then it works but need to be able to work without manual changes to each client.
    Any ideas?
    Many thanks,
    Argyris

    Hi,
    Additional, please confirm your DHCP option have configure the correct WINS server.
    The related KB:
    Understanding DNS Client Settings
    http://technet.microsoft.com/en-us/library/cc754152.aspx
    Configuring TCP/IP networking
    http://msdn.microsoft.com/en-us/library/dd163570.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How a router can resolve dns without ip name-server command?

    Hello everyone,
    A question about the command "ip name-server *.*.*.*"
    If I didn't put in the DNS server, the router can still resolve the domain name. You can see the domain server is 255.255.255.255.
    Why does this happens?
    R4#ping www.cisco.com
    Translating "www.cisco.com"...domain server (255.255.255.255) [OK]
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 184.31.192.170, timeout is 2 seconds:
    Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms
    R4#

    Hi,
    There is a name server inside the LAN. Before searhing in the DNS server, it checks the name server in the LAN to reduce the time for searching. The name server of the LAN is like a cache which stores the results coming from the DNS server.
    So, it is name server of the LAN which is resolving the IP address.
    Thank you.
    * please rate the helpful posts.

  • HT1689 i just changed my Apple ID.  Does this automatically change my password for ITunes?  THat is my overall goal.  I want to change me ITunes Password.

    I just changed my Apple ID.  Does this automatically change all previous passwords associated with Apple products?

    Changing your account id doesn't change your password. If you want to change your password then you can log into your account on your computer's iTunes via the Store > View Account menu option, or you can change it by logging into http://appleid.apple.com

  • I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

    I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks

    BTW. I have seen posts suggesting age of Mac has an affect. Mine is MacBook Pro (Retina, Mid 2012)
    The mail I am having problems send is Exchange and google mail. The google client I re-installed and this had no affect.

  • I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks in response to Pita Fito I have contacted three more people that made the upgrade and they have the same problem

    I cannot send emails, only receive, after upgrade to Yosemite today, Apple should resolve this issue. Any help more than welcome. Thanks
    in response to Pita Fito
    I have contacted three more people that made the upgrade and they have the same problem. My advise is not to upgrade until Apple solves the serious issue, I would hate to have to re-install Outlook...

    I can send e-mails just fine with apple mail on yosemite...
    Might not be a generic problem but rather a personal problem..
    You should try find a fix rather than waiting on apple.
    Hopefully somebody can help you out.
    More than happy to help with your settings/preference pain... And compare mine with yours...
    If you send some screenshots... I can send you my equivalent... So maybe you can figure it out.
    Is it a gmail or icloud email acount? Can be of more help if it is.

  • Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

    Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

    Try this:
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).

Maybe you are looking for