Apple why doesnt the ios7 go with the 4th gen
Apple why doesn't the ios7 go with the 4th gen ipod
Jason finlinson wrote:
Apple why doesn't the ios7 go with the 4th gen ipod
It simply does not have the hardware.
Similar Messages
-
Is the ios7 compatible with the ipod touch 5th generation
does the ipod touch 5th generation get the new ios7?
About iOS 7
The following from Apple is all that we know about iOS7 at this time. We are users, too, so we know no more than you.
iOS 7 will be available as a free software update for iPhone 4 and later, iPad 2 and later, iPad mini and iPod touch (fifth generation) this fall. Some features may not be available on all products.
*US English, French and German will be available with the launch of iOS 7. Additional languages will be added over time.
For general information on the features of iOS 7 see: Apple - iOS 7. -
when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?
- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button? -
My mac doesnt start. All i get is the gray screen with the apple and the loading icon but nothing more happens. I tried to start it in safe mode but it doesnt help. What can i do?
If you have a external USB enclosure - trying installing your hard drive in that enclosure and connect it to your usb port - restart your macbook while holding down the options key. If you Macbook boots to your desktop then you have a faulty cable. If you get the same error, then your hard drive just died on you.
good luck. -
I downloaded ios7 on my iphone 5 yesterday. All day it worked fine, then last evening it started blinking from the white screen with the black apple to my home screen. Each screen only stays up for 3-5 seconds then switches back. I have tried shutting down and it is still happening! Does anyone know how to fix this issue without having to go into the store?
Your power adapter is OK. If the only place it will not work is in your home, your house wiring and / or the appliances connected to it are likely to be the reason your Mac will not charge.
From Troubleshooting MagSafe adapters:
Identify line noise issues.
Unplug the power adapter from the wall, let it sit for 60 seconds, then plug the adapter back in.
If the adapter works after this 60-second "rest", you most likely have a line noise issue with your power source. You should reset the adapter periodically by repeating this moment of rest. This issue occurs when the AC adapter's "over voltage protection" feature senses ground noise and then turns off the adapter.
Some possible sources of line noise include lights with ballasts, refrigerators, or mini-refrigerators that are on the same electrical circuit as your computer. This behavior may not occur if you plug the power adapter into an uninterruptible power supply (UPS) or plug it into a different circuit.
Unless the adapter continues to exhibit this behavior on a known good outlet, it does not need to be replaced.
Household wiring problems are very common. They can also be very dangerous. Fortunately most problems can be easily fixed by a qualified electrician. -
I have updated my apple tv 2nd generation to the latest software but it shows the itunes symbol with the usb. Anyone know why this might be? Thanks
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
MBP won't reboot past the white screen with the grey apple. Why? How do I fix it?
MBP won't reboot past the white screen with the grey apple. Why? How can I fix it?
Which OS are you on.
try doing an SMC reset http://support.apple.com/kb/HT3964
How long do you wait until giving up?? -
Hello as mentionned before I cannot get my macbook pro to switch on.
when it is not plugged as I press the power button nothing happens, when the computer is power plugged, it gives me the white blackground with the apple centered and the loading button below but it keeps loading forever left it as for 4 hours and still nothing.
I have try to reset the SMC but didn't change much, now instead of the apple logo I get a circle crossed
My macbook is 1 year and 4monthsSee Gray Screen, try holding the Shift key upon boot
Cheat sheet to help diagnose and fix your Mac
Drive may not boot, but if it's still working then data can be recovered
Data recovery efforts explained
Most commonly used backup methods explained -
Why is my laptop freezing on the gray screen with the apple logo when trying to power on?
In the last hour, one time it came on as far as the user sign in. But I wasnt able to click on a user, because the curser was constantly spinning. I have tried taking the battery out for a minute and putting it back in. Nothing. I have tried starting it while holding down the option key, and it pulled up a screen with a picture of my hard drive on it. So I clicked it, and it just goes to the gray screen with the apple logo, and does nothing else? Can anyone please help me? Are there any other keys that I can hold while turning it on?
ThanksSee Here for:
Frozen or unresponsive iPod touch
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup... Restore as New...
Restarting your device
1) Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
2) Press and hold the Sleep/Wake button until the Apple logo appears.
Follow these steps to reset your device
Note: Reset your device only if it is no longer responding and the steps above do not work.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iPhone Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
My computer MacBook pro want turn on it started when input the lion ultimate versión it straus in the white screen with the Apple and the circle ten it goes off
Try starting your computer by holding down the command + R keys, then run disk utility on your hard drive to verify/repair it. Take a look at his link, http://support.apple.com/kb/HT1782
-
okay so just as i was typing this the problem resolved itself, but when i went to charge my ipod i noticed ot stayed on the black screen with the apple for a good 10 minutes, so i pressed buttons furiously (!!) and the screen went white and then back on to the screen with apple again. this contiinued for a good 4 tries then eventually went on to my lock screen (which is the very beautiful dom howard not that you know who that is and i dont even know any of you so i dont know why im typing all of this out but i really enjoy typing it's an incredibly exciting past time of mine but unfortunately i havent used capital letters) just wondering if it will happen again
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Why can't I open some of my documents on Pages even though I created them all on the same IPad with the same Pages ap?
I think I know the problem because I've had it myself. I didn't upgrade iWorks on my iPad, but after Apple made changes to iCloud (concurrent with Mavericks) any docs passing through it were modified and made unreadable. Even though, as you say, they were created on my iPad using the previous version of iOS Pages, which I didn't upgrade.
iCloud is the culprit, if your iPad settings had iCloud>Documents & Data enabled, the docs were modified and disabled in the cloud.
I made a further mistake. After I saw this happening, I didn't think to turn off auto updates, and Apple pushed the new version of iOS Pages onto my iPad. The result was that ALL my docs disappeared from the iPad, and from iCloud.com also. I have not been able to recover them.
I've been talking to the Pages engineering team about it. If they come up with an answer, I'll post it here. Meanwhile, get those older files backed up somewhere safe if you can. -
Why can't I use the Podcast app with the new update?
Why can't I use the Podcast app with the new update? There needs to be an update for ios7 but it freezes and goes back to the home screen, can anyone help, thanks!
See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
Why will Safari not open with the homepage that I marked even after marking it in Safari preferences?
Might be corrupted Safari preferences ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type of copy paste the following:
~/Library/Preferences/com.apple.Safari.plist
Click Go then move the com.apple.Safari.plist file to the Trash.
Quit and relaunch Safari and try setting your hompeage. -
Why is my ipod full with the mention OTHER?
What is "Other" and What Can I Do About It?- Apple Support Communities
What is the Other on my iPhone and How to Remove It
How Do I Get Rid Of The "Other" Data Stored On My iPad Or iPhone? [Ask MacRx] | Cult of Mac
Maybe you are looking for
-
Function module to know in which EHP is the system
Hi, I am trying to find a Function Module which give me the release in which the system is. I need to know if it is ehp3 or ehp4. I know that I could use table CVERS. But I would like to know if the package is active or inactive. Thanks, Alejandro
-
Error JBO-36000 in JDEV 11 TP3 when trying to use an ADF LOV Input Text
Hi, I'm using JDEV 11 TP3 ( 11.1.1.0.0) and i'm trying to use an ADF LOV Input Text on a JSF Page. In The Business Components Browser, It works perfectly. If I drop my Data Control on my JSF Page as an ADF Form, it works fine, too. But if I drop the
-
RemoteApp and Session Host on same servers?
I have been asked to architected a new deployment of our RDS server with Windows 2012. I have identified that we are standing up a Gateway, Web access, RemoteApp and session host. VDI is a pain point for us so that will not be in this implementation.
-
My ps3 hard drive is 160GB and is out of room. How can I add more capacity??
Is there a way to add capacity to a ps3 160GB game system??
-
I am getting a generic error message when I try and add a mov. file. what can I do to fix it?