Apple Wireless Keyboad (A1255) - Firmware update in Vista?

How do I go about updating the firmware of the Wireless keyboard in Vista to the latest version? Is this just done automatically by the Apple Software Update?

Yeah i think were all having the same issue after that Firmware update.
Surely if we can revert to an older firmware, we can get the wireless back. It still means i have to print one page at a time from OSX and sometimes reboot the printer - but thats better than not being able to print at all hey.
The new firmware is on their FTP under this link:
ftp://ftp.hp.com/pub/softlib/software12/COL22689/bi-59777-2/HP1022_FW_Upgrade_Security_20120928.exe
Ive had a quick look on the FTP using a client hoping i could find older firmware.
Does anyone have the name of the older firmware that worked, i think i can use filezilla to search the FTP?
Really dont want to set it up shared on my mac or get rid of it - come on HP, sort this out.
Thanks for youe time guys.
Warren

Similar Messages

HT201321 my Apple wireless keyboad and Mouse dosent work since one Month after geting the new iMac 27 !Would getting the Osx 10.7.Bluetooth utility repaired after updating onto 10.7.5 & Admin Tools 10.7.5 ?

Hi Dears
My Apple wireless Mouse and keyboard dose not work since one Month after getting the new iMac 27 !
The Bluetooth assistant could find the Devices for few seconds but can not pairing them ? at least get an error
Operation system is already of version 10.7.5 updated ,but no use ?!
Could getting the Os x 10.7.5 Bluetooth utility repaired after updating to Admin Tools 10.7.5 ?
When not ,than advice me please to repair or solving this problem ,

Your problem is likely due to
com.paceap.kext.pacesupport.snowleopard 5.9.1
I would recommend tracking down the app that uses this and unionist all it completely from your computer. Also if you have upgraded the RAM on the machine you may have a RAM falling DIMM or it may have become unseated or it might not be the correct specs for your machine.

Apple Wireless Keyboard doesn't work in Vista Ultmate?

My Apple Wireless Keyboard doesn't work (not response) on Vista Ultmate but its works properly in Mac OS X 10.5.2...
Should I install the driver in Mac OS first or update the keyboard firmware?
Or install a driver for Windows Vista (I can't find any on web...)
Please kindly help! Thanks a lot.

this problem is fixed, but if anybody has an idea what happened, I would like to know.

HT1998 When will Apple release an new firmware update (7.6.5 or higher) for the Airport Express/Extreme?

I am sure most of you know how terrible the 7.6.3 firmware for the airpot express/extreme is. I was on the phone with Apple technical support and they had admitted there are issues with this lastest firmware and confirmed they are working on it. I know how well Apple fixes their issues however it has been over 6 months and nothing. Because of all these issues, I have had to roll back all my airport equipment to 7.6.1 mainly to use the Airplay feature. Is there any projection for a new update or is Apple just ignoring this issue!?

What problem are you having exactly? I have updated to 7.6.3 and AirPlay works just fine in fact better especially with iTunes. All my wireless devices show up as soon as they are turned on or in range.
Not trying to predict anything here, but if the firmware update IS defective software, Apple probably would've fixed it by now.

Problems after wireless router (WRT310n) firmware update.

I updated the firmware on my wireless router (wrt310n) yesterday and now I am having major issues connecting my laptop to it via wireless. After the update, I reset the router as well as unplugged the power source. Once the update and everything was reset, I re-entered all my settings and set the computers back up using the LELA. I go to change the laptop to wireless and it says it can't connect to it. I did the LELA update on the laptop thinking that would fix it, but it didn't help. However, the whole time I am able to connect to the router using a ethernet cable. I turned off all of the encryption settings, firewalls, and broadcasted my SSID. I searched this forum for some help and one topic suggested somethings, which I did, and I was able to connect wirelessly with the encryption. I thought I was done and set-up, until later that evening. I turned the computer back on only to see the same problem again. I decided to deal with it the next day (today) by uninstalling LELA and just using Windows to configure my wireless settings. As soon as I uninstalled LELA, entered the key into the Windows program, it worked like a charm. Until tonight, when I turned on the computer. Now I'm connecting to the network wirelessly, but it says "Limited or no connectivity." Acting like there is no encryption key entered. I go to "View Wireless Networks" and it says "WIndows cannot configure connection. If you have another program to manage this wireless connection, use that software." The thing is, I don't have another program on here to manage a wireless connection. Sorry for the long post. I figured if I didn't type everything out, people would have just asked me questions. I had no problems with this router until I did the update yesterday. If it can't be fixed, is there a way to revert back to the old firmware? Thanks in advance.

Well you should adjust the Wireless Settings on your router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Before you attempt to connect to your wireless network you should first check your Programs menu if there is any Wireless Program(like 'Intel Proset' , 'Dell Wireless WLAN' , or anything that gives you a clue of a Wireless Program/Utility/Software)...You should use the Wireless Utility/Software(if any) to connect to your wireless network and not the Windows default Wireless Program to avoid any conflicts...

Sound Blaster Tactic3D Rage Wireless - Driver and Firmware update, now it's frozen?????????

Just recieved my headphones yesterday - plugged it in and charged it = works. I then decided to download the newest drivers and firmware and went straight to bed. This afternoon, suddenly no sound is detected, what so ever! The USB Power LED flashes slowly and a constant red glow is showing at my headphones.. When I try to re-pair it, the USB Power LED flashes rapidly as it should, but neither the Mic Mute button, nor the Connect Button on the headphones responds.. It feels like the headset is simply just frozen right after the new driver/firmware installation.
I've tried everything pretty much.. Went from Wireless to USB to see if that helped, but it didnt. Tried to remove / setback the drivers, still dosn't work. Headphones is just completely frozen with no buttons working and a constant red glowing light - can't be turned off or restarted!!!
WHAT TO DO?!?
Cheers,
Alexander

My headphones just ran out of power during the day = it resetted itself. I then connected it again and re-paired it. Atm it's working perfectly fine again. I will now try to reinstall the Control Panel, not the driver though, hopefully it will work this time and wont make the headphones go into "non-responding-retarded-mode" once again :-)
Conclusion: For me it felt like it was either the Drivers or the Firmware update, maybe both, which made my headphones "crash", or atleast not respond to any command / buttons pushed. If anyone faces the same or similar problems as me, due to installation of drivers/firmware, let your headset run out of power (if you as me, don't know how to remove the battery manually) and just reconnect it :-) Should work then.
- Alexander

Zen Micro needs firmware update for Vista, but what now as it fail

As I now use Vista (paid for by my work) I came to install my Zen Micro which wasn't recognised so I came to the website and discovered that you need version 2 of the firmware for it to be compatible with Vista. Having never had the need to upgrade before I was still on Version one so I downloaded it onto my other WinXP machine?which I've used my Zen on alot before to do the upgrade. Started the upgrade and all seemed to be well until a point a 3rd of the way through a box came up asking what I'd like to do with the device (like the one when a USB key inserted). Leaving the upgrade I returned hour later to see nothing has changed and the upgrade has failed.
I've tried all the options with recovery mode but it still just shows up as having version 0.0.65 and when inserted into a PC shows up as a?Creative Zen Micro?in device manage and has a 20MB disk partition for storage but when I try and run a firmware patch it says its not connected.
Looking round this forum this seems to be quite common upto now but with the release of Vista people are forced to take the 'risk' of running a firmware update that when it fails doesn't seem to be recoverable even in recovery mode. Please can you look into updating the firmware to find these devices that it can't see, for many years I've laughed at my friends with their crashing ipods that need charging everyday due to not being able to change the battery but it now seems the jokes on me.

I used Adambonello's fix and it worked?http://forums.creative.com/creativel...mp=true#M80097

Since upgrade to OS5 I can't pair my apple wireless keyboad to my Ipad2

I recently upgraded my Ipad2 to O2 5 and since then it no longer recognizes my Apple wireless keyboard. I have changed batteries on the keyboard and followed directions in the instruction book and the Ipad doesn't feel that the keyboard is within range or turned on.

Try Settings > General > Reset > Reset Network Settings

Firmware update on Vista-MuVo N

How can I update the firmware on a?<span class="Apple-style-span">-MuVo N200 in Vista?

Before you open PC Suite, right-click the icon and select Properties, now select the Compatibility TAB and in the Compatibility Mode 'Run tis program in compatibility mode for: Windows XP'
gerrymoth
http://nokiAAddict.com
Using E71, N97 & 5800 XM on O2 Simplicity

Airport Express doesn't connect to wireless network after firmware update

Hi,
I just updated the firmware on my Airport Express to 6.3 and now it will no longer join the network. I have tried reseting to the factory defaults and Airport Utility accepts all the information and shows the unit with a green dot next too it. However, the unit is still flashing amber and in the final step where the Utility tries to save the configuration the update fails and I get the following error message:
An error occurred while reading the configuration.
Please make sure your AirPort base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753).
I am using an old style AirPort Extreme as a base station.
Can anyone help?

Wow, really no suggestions yet? This is a first for me, on the Apple Discussion boards!
Can anyone help?

HT3932 Wireless Aluminum Keyboard Firmware Update

I am trying to install the Aluminum keyboard software update. When I click on the file I downloaded from apple (Jan 25, 2010 - long file name) I get a message that says no aluminum keyboard is connected. The keyboard is on, paired and connected (I can type things; show up under bluetooth, etc). What am I doing wrong? The firmware version is way old (050 vs 321).
Thanks,
Justin

Hello:
Your profile simply says "iPad." What, exactly, are you trying to do?
Barry

Can't ping wireless controller after firmware update to 7.0.240

I can figure out why I cant ping controller 10.1.99.100. Here is my controller config. It is connect to H3C 5800 switch. I have the switch config below as well. The port on the switch is on Native Vlan 1 untagged. Any help would be appreciated.
(Cisco Controller) show>interface summary
Interface Name                   Port Vlan Id IP Address      Type    Ap Mgr Guest
ap-manager                       1    untagged 10.1.99.101     Static Yes    No
external                             1    8             10.0.1.250       Dynamic No     No
internal                              1    93            10.42.156.66   Dynamic No     No
management                      1    untagged 10.1.99.100    Static No     No
virtual                                   N/A N/A      1.1.1.1           Static No     No
H3C port configuration
Interface GigabitEthernet1/0/16
port link-mode bridge
port link-type hybrid
port hybrid vlan 2 8 92 to 93 tagged
port hybrid vlan 1 3 199 untagged
speed 100
duplex full

Cisco Controller) >show port summary
           STP   Admin   Physical   Physical   Link   Link
Pr Type   Stat   Mode     Mode      Status   Status Trap     POE
1 Normal Forw Enable 100 Full   100 Full   Up     Enable N/A
2 Normal Disa Enable Auto       Auto       Down   Enable N/A
3 Normal Disa Enable Auto       Auto       Down   Enable N/A
4 Normal Forw Enable Auto       100 Full   Up     Enable N/A
5 Normal Disa Enable Auto       Auto       Down   Enable N/A
6 Normal Disa Enable Auto       Auto       Down   Enable N/A
7 Normal Forw Enable Auto       100 Full   Up     Enable Enable (Power On )
8 Normal Forw Enable Auto       100 Full   Up     Enable Enable (Power On )
(Cisco Controller) >show interface man         detailed management
Interface Name................................... management
MAC Address...................................... 00:21:55:9a:4c:20
IP Address....................................... 10.1.99.100
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 10.1.99.254
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. 1
Quarantine-vlan.................................. 0
Physical Port.................................... 1
Primary DHCP Server.............................. Unconfigured
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No
Guest Interface.................................. No
L2 Multicast..................................... Enabled

Apple RAID Card Firmware Update crashes

Early 2008 Mac Pro 2.8GHz Quad Core Intel Xeon
I'm trying to install Apple's RAID Card Firmware update on my 2008 Mac Pro (which yes, has a RAID card) and every time the update utility launches it immediately crashes because it couldn't load the CoreRAID framework:
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/CoreRAID.framework/Versions/A/CoreRAID
Referenced from: /Applications/Utilities/Apple RAID Card Firmware Update.app/Contents/MacOS/Apple RAID Card Firmware Update
Reason: no suitable image found. Did find:
/System/Library/PrivateFrameworks/CoreRAID.framework/Versions/A/CoreRAID: mach-o, but wrong architecture
I've tried reinstalling the CoreRAID framework directly from the Mavericks install image with no luck. The same thing was happening with 10.8 and I was hoping 10.9 would fix it.
I did a lot of Googling and someone in a somewhat related issue suggested running "lipo -info" on the library. If that's helpful to anyone here's the output:
lipo -info CoreRAID
Non-fat file: CoreRAID is architecture: x86_64
but from that it looks like it should have no problem being run on my Intel Mac Pro.
Any help would be appreciated, it's annoying that Software Update keeps informing me that I have a pending update, and every time I log into my server I get a crash alert from the

Well, I went ahead and opened a support ticket on this.
Tech on the phone was not immediately able to come up with a solution, and has escalated it to engineering.
I am willing to bet that the RAID Card firmware update doesn't "know" about MP11.005D.B00 -- and will only install with MP11.005C.B08.
The question is this: What is the difference between MP11.005D.B00 and MP11.005C.B08 -- and does this impact the Hardware RAID in any way?

TC issues after latest firmware update

Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

Need some more info.
What is the modem.. make and model?
Is it both modem and router or just a modem?
What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
But it does seem hard to get rid of properly.
I want you to do a factory reset not just a hard reset.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
eg TCgenx (use actual gen if you want) for base station name.
TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
Tell us what OS the computers are running and I can tell you how to install the old airport utility.
Test the TC in bridge to your other router is also a good alternative.

Trouble with keys on apple wireless keyboard and MBP

I have attached my Apple wireless keyboard to my MBP and I want to use it with the onboard screen. It properly synced, and I know it reads the keyboard because the F keys work, and the delete button works, and it even can wake the computer from sleep mode. However the problem is quite simple, the alpha keys do not work. I can turn up my brightness, or volume cycle through my "spaces" on leopard but am still unable to type. I have looked all over for other cases of this and can not find it. Is it possible that the apple wireless MUST be used with an external monitor only? I have not attempted that yet because I have been away from my studio for a few weeks.
If anyone could shed some light on this situation it would be greatly appreciated.
Thank You.

The "wireless mouse/keyboard firmware update 1.1" is for the old white plastic wireless mice and keyboards , Sean. Is the one you are trying to use one of these, or is it one of the aluminium ones?
If it is the aluminium one, then the update you might need is Aluminum Keyboard Firmware Update 1.0 - http://www.apple.com/support/downloads/aluminumkeyboardfirmwareupdate10.html
None of the updates should be needed to prevent the sort of problem you report though.
Is this keyboard newly purchased, or one that you have had for a while and that ahs worked in the past? It may simply be defective.
The only other thing I can think of, apart from conflict with a third party keyboard driver or the like, is a corrupted system file of some kind, in which case an "archive and install" of the OS might be needed to fix it I'm afraid.
Cheers
Rod

Apple Wireless Keyboad (A1255) - Firmware update in Vista?

Similar Messages

Maybe you are looking for