Apple wireless mouse and keyboard stop working ... now says OS X version and bluetooth incompatible

For no apparent reason my apple wireless mouse and keyboard stopped working. I was not upgrading or installing anything, the batteries are good, nothing was changed as far as I know. Now bluetooth discovers the paired devices, connects for about 30 seconds, the disconnects ... or stays connected but doesn't work.
What's happenned ... I'm rushing to finish a big job ... any ideas? I've tried re-pairing but doesn't work ... says that OSX version may be incompatible with device bluetooth ... I'm using Lion so maybe there is another lion problem?

Hello:
Barry: What do you mean with "making devices favorites"?
This is the method:
Go to system preferences>bluetooth. Highlight an item in the sidebar. If detailed information does not appear, click on the little gear and select show more info. Then click on the gear again and select favorite.
And how could an hardware-related problem be (temporarily) solved rebooting the OS?
Intermittent problems are, IMHO, most often caused by hardware. Restarting will occasionally "fix" problems - why, I do not know.
Barry

Similar Messages

I cal apple from israel i say i gat i phone5 in the philippines and it stop working the say bring it to us apple and i gat ther the say sand it to hong kong ?

i cal apple from israel i say i gat i phone5 in the philippines and it stop working the say bring it to us apple and i gat ther the say sand it to hong kong ?

iPhone warranty is valid only in country of original purchase.
If the iPhone was originally sold in the Philipines, it must be
returned to there for repair/replacement. You must take it or
send it to a friend/relative there to take to Apple repair in the
Philipines. Apple does not accept international shipments for
repair nor does Apple ship out of the country after repair.
If Apple told you that the iPhone had to go to Hong Kong for repair,
then the iPhone was originally sold in Hong Kong and then resold
to you in the Philipines. In that case, take it to Hong Kong.

I had photoshop on my hp and it stopped working, it says error 16. I already tried uninstalling and reinstalling it and nothing works. Also I just bought a Mac, is there any way i can transfer photoshop to my new computer?

I had photoshop on my hp and it stopped working, it says error 16. I already tried uninstalling and reinstalling it and nothing works. Also I just bought a Mac, is there any way i can transfer photoshop to my new computer?

Look at this guide:
Configuration error 16 | CC, CS
I don't know what version you have, but you cannot install a Windows edition on a Mac, you need the Mac edition.
If you have Photoshop CS6, you can swap it for a Mac version, otherwise you would have to purchase a full Mac version ($700) or enroll in the $10 per month Photography program from Adobe to use Photoshop CC.
Gene

Mouse and keyboard stop working with Mavericks

This has happened twice now since installing Mavericks.
I'll be working along, and then all of a sudden, I am not able to click with my mouse and my keyboard stops working. I AM able to move the cursor around on the screen. But, I am not able to click on anything and I can't use the keyboard to force quit the finder. The only way to get unstuck is to press the power button on the front of the Mac to shut it down and then restart.
I am using a wired Apple Keyboard and a wireless Apple Magic Mouse. My Mac is a MacPro 2 x 2.3 GHz Quad-Core Intel Xeon Mac.
Like I said. this has never happened before. But it's happened twice since installing Mavericks.

Everytime I restart my computer, especially for updating maverick, my keyboard and attached mouse (both apple for an Imac) stop working. When I plug in an other keyboard, I can get into my Imac again. Would this SMC apply to this problem as well?
What should I do?
thanks, hb

Apple Wireless Mouse has suddenly stopped pairing

HI everyone,
My Apple Wireless mouse (it's pretty old) has just stopped pairing with my PowerBook G4. When I try to pair it, it shows onscreen that the pairing is succesful and I have a full battery bar, but the mouse itself stops "flashing" and when I try to move it, I get the "Connection Lost" message.
Changed fresh batteries, no new devices in house, disconnected all USB cables. Basically tried all the things recommended in other posts with no luck. (There's a post recommending to check the antenna...erm, I have no idea where an antenna might be...if anyone would be so kind ?)
Just wanted to know if there are any solutions or is it time to get a new mouse. Oh yes, mouse model number A1015 if that helps at all?
Thanks!

Hello shaz:
You have tried the things I would suggest. You might take the mouse to an Apple store to see if it works on another computer.
Barry

T510 Mouse and Keyboard stops working with Windows Update - unable to roll back, happened twice

My mouse has been working fine for a while but it stopped working followed by the keyboard, I put it down to a Windows update but because Windows 7 keeps bluescreening on a restore point I couldn't recover. I contacted Lenovo got the rebuild disc for my machine, completely rebuilt it, all working fine, then after 2 days same issue, mouse stopped, keyboard stopped, restore points make no difference. Does anyone know what windows update is causing this and if there is a fix aside from rebuilding, I can't keep doing this and I need to understand the cause really, not had it with a laptop before. Gone back to using my old laptop until I can get it sorted. Does anyone have any ideas?

I installed the latest drivers via windows update and got the touchpad back, rebooted, it went again. Netiher the trackpoint or touchpad work. I then thought rather than focus on drivers check the bios. I disabled the trackpoint in the bios, still neither works, however if I disable the touchpad in the bios and enable the trackpoint, the trackpoint does consistently work. I can't explain why the touchpad worked after a touchpad update but now fails, the ultranav driver is installed but if both are enabled in the bios it say it isn't installed, if the trackpoint is enabled it tells me I need to enable both so it clearly knows it's there. What's curious is that this doesn't happen on the complete clean IBM build. I can't not turn off windows updates, I'm a developer so Ioad the laptops up with a vast variety of software and I need many of the windows update fixes, either way I am surprised they are conflicting with the touchpad so dramatically. I can't see it being a virus I'm using two layers of protection and if I blow the machine away and installed the updates via an .iso image (so it's never connected to anything else), I can replicate the problem. It's feasible it's another piece of software causing the conflict. Any one have any idea what could be going on or seen it before?

Mouse and Keyboard stops working after a while

Hi, I'm not even sure where to start to find the cause of the problem. I have a normal ps/2 keyboard and USB optical mouse, both of them just stops working after a few hours. The light on the mouse just dies and the keyboard is not responsive at all. I have to do a hard reboot of my computer. How and where can I diagnose the problem? I noticed the problem started when I upgraded to the latest kernel.

And then after a while it will just use a new address:
Oct 31 01:47:15 wdesktop usb 1-1: USB disconnect, address 6
Oct 31 01:47:15 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 7
Oct 31 01:47:16 wdesktop usb 1-1: configuration #1 chosen from 1 choice
Oct 31 01:47:16 wdesktop input: Microsoft Microsoft Wheel Mouse Optical as /class/input/input8
Oct 31 01:47:16 wdesktop input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical] on usb-0000:00:10.0-1
Then after that my mouse is unusable, the following is shown:
Oct 31 01:48:41 wdesktop usb 1-1: USB disconnect, address 7
Oct 31 01:48:41 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 8
Oct 31 01:49:13 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 9
Oct 31 01:49:45 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 10
Oct 31 01:49:56 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 11
Oct 31 01:50:08 wdesktop uhci_hcd 0000:00:10.0: Controller not stopped yet!
Unplugging and plugging the mouse back does not work
I found a workaround for that by unplugging the mouse, removing the uhci_hcd and adding it back, so:
sudo rmmod uhci_hcd
sudo modprobe uhci-hcd
But I'm still not sure what causes the problem.
Last edited by willy (2008-10-30 15:02:54)

Mouse and keyboard stop working ocassionally and I have to re-boot the computer. does anyone else have this issue?

I have a pwoer Mac with a dual quad processor and current os. If I turn off the computer at night and power up the next day my wireless mouse and keyboard do not work nor does my hardwired mouse. I have to hold the power button to re-boot the computer to get it to work.

Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.
And/or...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Mouse and Keyboard stop working after reboot

So far the computer is working great except for the fact everytime you reboot the keyboard and mouse stop working... I did a clean format x2 and put the service pack on and I am still getting the same problem.
Anyone have this problem or something similair ? Any ideas ?
Thanks in advance :-)

The problem is not your S/W install. It's with the MSI Motherboard. Your best bet is to ask MSI when a fix will be available, or go buy a different board.

External Mouse and Keyboard Stop Working When X220 is Docked and Screen is Closed

I have an X220 with a docking station, external monitor and external keyboard/mouse. When I start the laptop from a cold boot and it's docked, my external mouse and keyboard work fine with the screen open or closed.
If I undock and redock with the screen closed, the external keyboard doesn't work and the mouse cursor moves, but the mouse buttons don't do anything. If I open the screen, then the keyboard and mouse work fine.
I've swapped the keyboard and mouse and still have the same problem, so it's not the kb/mouse. This is a brand new X220 and the issue has been occurring since it was purchased.
Any thoughts?

hey mhambalek,
hard to say what's going on, though i would recommend heading to http://support.lenovo.com , do a full update of your unit.
also, if the external keyboard & mouse & monitotor is connected to your unit without the docking station, does the same thing happen?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Macbook Air Mid 13 TrackPad and Keyboard Stopped working.

Both trackpad and mouse work when I have to sign into my account; however, once I'm on my windows screen both stop working. It tries and searches for bluetooth keyboard and mouse. I don't know how else to fix this issue. Please help I have tried all recovery options and erased everything on disk utility ( i saved my files first ) . for now i have been using an external mouse and keyboard. I also had the newest software update os x yosemite but when i re installed os x it installed lion but still the same problem.

finally its fixed!! ...i went on the mac osx hints site...someone suggested resetting the pram and pmu...i was worried i wouldn't be able to hit the key combinations because of the whole keyboard thing...but apparently, my keyboard still worked until it got into os x...so i reset the pmu with shift-option-control-power while the computer was off...and voila...problem solved!!
thanks for all your help....you *******!! lol jk
peas

Keyboard stopped working, now laptop doesn't turn on at all

Hi All, I've got a HP Pavillion something, I think it's a G6 although that might just ring a bell because of the song....
Anyway, this morning I was on my laptop, I did a facebook post with no issues, then tried to create a new folder in "my music" and noted that some of the keys on my keyboard were having no effect. Thinking my laptop may have felt overworked I just did a restart.... but when trying to enter my password I had no luck, the keyboard barely worked. I tried another restart, again no luck, and then one of those hard restarts, where you remove the battery and AC adapter etc.
Now my laptop doesn't switch on at all.... I've swapped the battery with my parent's laptop (we have the same one) and tried their AC adapter, but to no avail. My laptop is completely 100% dead.
I've had it since March last year, so I'm only just out of warranty (typical) but if this has happened already it's really not fit for purpose. Previous laptops from Dell and Samsung have given me a good 4 years of use before I've got to a point where they're no longer up to the job, but both I could still switch on and use for a good lenght of time after they were replaced.
I don't have any money to get it fixed, I am going back to University in a months time and deffo wont' have any money to get it fixed. I need a laptop for my coursework, and for my job which relies solely on the use of my laptop.
Does anyone have any ideas what I could try to see if it'll work again....short of bashing it up with a hammer (and then of course it'll never work again) I have no idea what to do.
Anyone know how much it is to get a laptop fixed if that's my only option? How much do people who can fix these things charge?

Also I have tried following the advice here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
but to no avail

Mouse and Keyboard stop working since Upgrade to Leopard

I upgraded to Leopard on Friday. Twice today, I've had problems with the mouse/keyboard freezing me out of my MBP. I never had this issue prior to upgrading. The first time today, both the KB and mouse quit. Later in the day, just the KB. Both times were after periods of inactivity. I don't remember the exact scenario leading up to it, but in both cases, a reboot fixed it. I don't have enough detail to (in my mind) justify a trip to the genius bar, but maybe someone else out there has seen this and solved the mystery?
Cheers...

FYI, uninstalling Parallels and VMWare's Fusion (I was using both) doesn't help.
However another scrub of the System log did reveal something peculiar. Sort of a mess to post but in case anyone from Apple is watching this, I am attaching. This is coming up right after I resume wake from suspend.
Oct 31 09:33:25 jwilcox-mbp kernel[0]: AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
Oct 31 09:33:28 jwilcox-mbp kernel[0]: AppleUSBHub::setPowerState(0x3ef9a00, 2 -> 4) timed out after 10724 ms
Oct 31 09:33:28 jwilcox-mbp kernel[0]: USBF: 124.693 ControlTransaction: control packet 1 error 0xe0004057
Oct 31 09:33:31 jwilcox-mbp kernel[0]: USBF: 127.693 AppleUSBUHCI[0x3dca000]::DeviceRequest - dmaCommand (0x3f27900) already had memory descriptor (0x557e400) - clearing
Oct 31 09:33:31 jwilcox-mbp kernel[0]: USBF: 127.694 AppleUSBUHCI[0x3dca000]::DeviceRequest - buffer dmaCommand (0x3f27800) already had memory descriptor (0x3f51580) - clearing
Oct 31 09:33:31 jwilcox-mbp kernel[0]: USBF: 127.694 ControlTransaction: control packet 1 error 0xe0004057
Oct 31 09:33:32 jwilcox-mbp kernel[0]: AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
Oct 31 09:33:46 jwilcox-mbp login[228]: USER_PROCESS: 228 ttys000
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 AppleUSBUHCI[0x3dca000]::DeviceRequest - dmaCommand (0x3f27800) already had memory descriptor (0x5467280) - clearing
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 AppleUSBUHCI[0x3dca000]::DeviceRequest - buffer dmaCommand (0x3f27900) already had memory descriptor (0x5469780) - clearing
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 ControlTransaction: control packet 1 error 0xe0004057
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 AppleUSBUHCI[0x3dca000]::DeviceRequest - dmaCommand (0x3f27900) already had memory descriptor (0x601fc00) - clearing
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 AppleUSBUHCI[0x3dca000]::DeviceRequest - buffer dmaCommand (0x3f27800) already had memory descriptor (0x601b680) - clearing
Oct 31 09:33:48 jwilcox-mbp kernel[0]: USBF: 144.696 ControlTransaction: control packet 1 error 0xe0004057
Oct 31 09:33:49 jwilcox-mbp kernel[0]: USBF: 144.798 AppleUSBHub[0x3f4b800]::SuspendPort - expected port to be suspended for conversion, but it is not!!

Computer Freezes and Keyboard Stops Working

I'm having serious issues with my computer freezing and not responding. I thought that it maybe a problem with OS X so I re-installed that but to no avail that did not ameliorate the situation. Not to mention it was near impossible to re-install it because the computer would keep freezing.
Now after I start up the computer, it will begin functioning normally I can open applications, etc but after probably 5 min, regardless of what I'm doing it will freeze and the keyboard and mouse will not work.
So to restart the computer I have to hold down on the power button. But then after I have waited the recommended 30 seconds to a minute to turn it back on the computer screen won't always illuminate. So I have to wait more like 15 to 25 minutes to try and turn the computer back on then the screen will work.
I'm not sure why this is happening, I just bought this computer less than a month ago, and this "problem" just started happening a couple of days ago. I'm a little frustrated, because this computer is brand new, do you think I just got a faulty computer or what?
If anyone has any advice or knows why this is happing please let me know. Thanks.
PowerBook G4 15-inch Titanium Mac OS X (10.4.4)

Hi, Melissa, and welcome to Apple Discussions. If your computer is brand new,
a) It's Aluminum, not Titanium. There's another set of Discussions forums that are specific to your model, and others with the same model may have suggestions for you that we Tibook owners won't.
b) You have a warranty, and this is what it's for. Don't hesitate to report the problem to the store where you bought the computer, or by phone to Applecare.
Good luck.

Triggers and actions stopped working, now plays start to finish

My edge file ive been animating has been working and working well... near the end of wrapping the project up i find!
that the preview now plays from start to finish,,, skipping all stop commands and button actions.
any way to fix to make it recognize the actions!
-Scott

Hello Scott,
This could be the sign that you have an error in your code in which case an animation will play to the end skipping all stops.
Please check at the bottom of your screen to see if you have an error message.
You can them click on the arror in order to get the code window where the error occured as shown bellow. You will see a red dot. Then correct your error.

Apple wireless mouse and keyboard stop working ... now says OS X version and bluetooth incompatible

Similar Messages

Maybe you are looking for