Apple Works Install Issue;"Default location required for install not found"
I am a new mac user. Just bought a Mac Air. Trying to install Apple Works 6.2.9. I downloaded, but when I try to install, I get a message "The default location required for this install could not be found. This install will be cancelled." Any ideas? Thanks!
The download isn't the complete application, it's an updater intended to be applied to an installed earlier version. AppleWorks is no longer sold by Apple but may be available on eBay or other retails. It has been 'end-of-lifed' and there is no support for it, however it works well on current Macs.
However given the situation you are probably better off getting something modern, such as iWork.
Similar Messages
-
Making Issuing Storage Location" required entry
Hi,
I want to make "Issuing Storage Location" required entry only stock transport order. Our document type is ZUNS. Selection key is UBF.
In SPRO:
Material management --> PO -->Define screen layout at document level
I ve selected "UBF Stock transport order" document type. Selection group is supplying plant. Then I ve marked "Issuing Storage Location" as a required (mandatory) entry indicator.
Then I ve crated a stock transport order but Issuing Storage Location field is not mandatory. Is there another way make it required entry?Hi,
I believe you will have to activate the settings for STO between storage location, in the setup stock transport order config, Set Up Stock Transfer Between Storage Locations, do the settings,read the IMG documentation if you need help in setting this up.
Regards
Chandra Shekhar -
Hi, I have a refurbished upgraded macbook with 320 GB Disk, 4GB Memory and running Lion OS v 10.7.5. This satisfies the second part of the requirement for installing OS X Mavericks (10.9) but happens to be an early 2008 piece. Can I somehow install 10.9? And why is apple not allowing people like me to try out this installation? Any reason that are too technical that people like me cannot upgrade and handle?
This would solve many apps to run on this.It's mainly the video card. The Models 2,1 through 4,1 have video cards with non-upgradeable 32bit drivers. The model 5,1 Late 2008 and newer have at least the NVIDIA GeForce 9400M with 64bit drivers. Mountain Lion and Mavericks require 64bit native drivers. Mountain Lion and Mavericks no longer support Intel's GMA 950 or GMA X3100 graphics processors.
While Lion used some 32 bit and a lot of 64 bit code, Mountain Lion and Mavericks are pure 64 bit, which excludes more systems than Lion did. It's not something you can add memory to, for example, as it involves the base architecture.
http://reviews.cnet.com/8301-13727_7-57470261-263/older-64-bit-macs-out-of-the-p icture-for-mountain-lion/?tag=mncol;txt
http://reviews.cnet.com/8301-13727_7-57387846-263/will-your-mac-run-mountain-lio n/ -
Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.
Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
What are the operating system requirements for installing a trial version of lightroom 4?
what are the operating system requirements for installing a trial version of lightroom 4?
http://www.adobe.com/products/photoshop-lightroom/tech-specs.html
Mylenium -
Hardware requirement for install PI 7.3
Hi, Expert,
Does anyone can tell me what is the hardware requirement for install PI 7.3 ( full version)? Disc space and RAM, etc. Does installation also need Oracle database to be installed as well? If not, where does PI store payload data?
Thanks,
CharlesHello
The installation/planning/size guides etc are available from:
http://service.sap.com/instguides
-> SAP NetWeaver
-> SAP NetWeaver 7.3
Further information on 7.3: SAP NetWeaver 7.3
Regards
Mark -
Minimum Hardware&software system requirements for installing sharepoint?
Hi,
I am planing to learn SharePoint,
That's why,anybody tell me minimum Minimum Hardware&software system requirements for installing sharepoint?
And also tell me for learning share point for beginners Sites or any materials or PDF's etc......Hardware and software requirements (SharePoint Server 2010)
Plan browser support (SharePoint Server 2010)
Here's the primary set of
implementation documentation for SharePoint Server 2010. From there check out Getting Started, Planning and Architecture, Deployment, Operations, and Troubleshooting.
There are a number of training resources out there (too many to list here) if you are looking for both IT Professional or Developer training.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
Hi, Expert,
We are planing to install PI and are totally new to it. Now we are asked about what are our requirements for install PI? Can anyone give some ideas on it? We are on the stage to install PI for development, not for production yet. Also, we better ask for PI 7.1 or PI 7.3? Is NWDS or CE included in the PI package? Thanks,
Charles.Thanks for everybody's input.
Actually I am the client who wants to install PI and am asked by consultant about the requirements. I have read the links provided and still not sure what kind of requirement we need to have.
From reading the documentation, I think PI7.1 has its own package and can be upgraded to PI7.3, while PI7.3 has to go with SAP Netweaver 7.3 package which includes PI, BI, SAP Portal, Web dynpro etc. PI7.1 package includes NWDS. But CE is not included in PI7.3. Please correct me if I am wrong.
We are going to migrate our current non SAP system to new SAP system and use PI to integrate local legacy system, 3rd party system with SAP system. Mostly we are going to use Idoc and web services, and may some of ABAP or JAVA proxies. So I think our requirement could be:
SAP PI 7.1 + EHP1 + advanced adapter engine + Oracle database. AS JAVA and AS ABAP would not be needed. Would that be enough for us development instance?
Please keep input.
Thanks,
Charles -
Patches required for installing the configuration management workbench?
Hi Team,
Please list all patches required for installing the configuration management workbench in Oracle Apps version 11.5.10.2 ?
Please let me know.
Thanks,
Suman V.Hi;
I also suggest to check:
How to Configure the Oracle Configuration Manager with Support WorkBench [ID 1174943.1]
Regard
Helios -
Server Requirement for Installing BPC
Dear all,
What are the minimum server requirements for installing BPC in RAM, Speed and hard disk size? Is there anything else that i should be aware of?
Thanks in advance for your help.
CheersHi,
If you are going to use Audit Collection Services (other methods to collect event logs can also refer to requirements below), here are some requirements:
A member of an Active Directory domain
A minimum of 1 gigabyte (GB) of RAM, with 2 GB recommended
At least a 1.8 gigahertz (GHz) processor, with a 2.8 GHz processor recommended
10 GB of hard disk space available, at a minimum, with 50 GB recommended
More information for you:
Collecting Security Events Using Audit Collection Services in Operations Manager
https://technet.microsoft.com/en-us/library/hh212908.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] -
Anybody know whats the system requirement for installing SAP in my home pc.
anybody know whats the system requirement for installing SAP in my home pc. I have p4 processor with 1 GB Ram. I can increase the ram to 2 GB. Please help
Hi friend,
Check your RAM , even for 4.7 version you need 1gb ram for better speed, 80gb sap only will occupy, for other storage you need to maintain another hard disk, or add new hard disk with your existing hard disk to make it 120 or 160, if its 6.0 then sap only occupies 6.0, then you need some more space for additional data, you cant browse internet on sap-server (which you installed), for internet and general purposed you need to seperate the hard disk, in case of 6.0 and you want to use both internet and sap you need to have 240-300GB HDD & 2GB ram, inter core2duo processor, 3.15ghz processor etc...and if its 4.7sap and other Operating system you need to have minum 160GB hard disk and 1gb RAM for better speed and access...
clarify if any doubts are there, system performance improves with good RAM memory...
reward if helps
krishna -
How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.
OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads. -
the application is working good, but the location of my device has found was totally wrong. any idea?
That would be the issue here.
The gateway is a modem/router that is in charge of your network.
The AirPort sensed this during setup and configured itself to operate correctly and passively with an "upstream" router on the network.....so, the Airport is in Bridge Mode.
The upside is that the AirPort is configured correctly to work with your gateway. The downside.....and Catch 22....is that the Guest Network will not operate correctly when the AirPort is in Bridge Mode.
The AirPort has to be the router "in charge" in order for the Guest Network feature to work correctly.
If you want to try to break some basic networking rules, and have two devices both trying to perform routing chores on the network, that might be a workaround. But, things get complicated to set this up.....and it will produce what is known as a Double NAT error on the network......which may allows things to work OK....or....cause problems.
Double NAT errors are unpredictable. It will be one of those things where you will not know if things will work until you try. No guarantees possible.
The network will have to be completely redone if you want to try this, and you will have to set up new Static IP addresses for devices that need them.
In general, if you want to try this, the network layout must look like this:
Internet Connection > SMC Gateway > AirPort Express > Ethernet Switch > Devices.
With things set up the way that they are now......the simpler thing to do would be to use the SMC wireless for your "main" network and the AirPort Express wireless for "guests".
The downside....."guests" will be able to "see" devices on your "main" network with this type of setup. -
i have upgrade os 6 on my iphone 4 but now in map application i cant found direction from location to location , message appear direction not found so please tell me solution for that
http://support.apple.com/kb/HT3743
Sorry discussing J/B is in breach of the terms and conditions of thi Apple hosted forum
Google is probably your best hope -
Required component home not found for component 'oracle.as.jrf'
I am getting the above error message during unpacking a template. Below is what I have done..
First machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed with 2 managed servers up and running fine.
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
Want to create another managed server on a second machine where the First machine has the Admin server..
Second machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
I go to the first machine and do a ./pack.sh command to create a template with a name of test.jar and it is successful. Use the -log command to see the logs.(everything is fine)
I copy the above created template test.jar to the second machine..
Than on the second machine, I do the ./unpack.sh command in the $WLS_HOME/common/bin folder and I get the following error message:
fail: read template from "/u01/app/oracle/middleware/wlserver_10.3/common/bin/test.jar"
CFGFWK-60550: Script execution aborted. The script may contain an error.
Required component home not found for component 'oracle.as.jrf' version '11.1.1.6.0'
Any ideas would really appreciate it. Both of the machines have the same weblogic installation and paths. The only difference is the amount of memory each machine has that is all.. Thank youI am getting the above error message during unpacking a template. Below is what I have done..
First machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed with 2 managed servers up and running fine.
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
Want to create another managed server on a second machine where the First machine has the Admin server..
Second machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
I go to the first machine and do a ./pack.sh command to create a template with a name of test.jar and it is successful. Use the -log command to see the logs.(everything is fine)
I copy the above created template test.jar to the second machine..
Than on the second machine, I do the ./unpack.sh command in the $WLS_HOME/common/bin folder and I get the following error message:
fail: read template from "/u01/app/oracle/middleware/wlserver_10.3/common/bin/test.jar"
CFGFWK-60550: Script execution aborted. The script may contain an error.
Required component home not found for component 'oracle.as.jrf' version '11.1.1.6.0'
Any ideas would really appreciate it. Both of the machines have the same weblogic installation and paths. The only difference is the amount of memory each machine has that is all.. Thank you
Maybe you are looking for
-
Unable to Send Mail to a Specific Domain
I've searched the forum but found no answers. I have a new iMac and a MacBook, both running 10.5.1 The email settings are identical on both computers (I checked many times over). I can send an received mail on the MacBook, but can only receive email
-
ITunes 7.3.1 (Mac): Some tunes no longer play (played fine under 7.2)
I have a few tunes (about 50 out of several thousand) that iTunes 7.3.1 will not play. The majority of these are things that I ripped from my own tapes or CDs. So none of them are copy-protected. They appear as normal in iTunes play lists, but will n
-
Using different codepages in a csv file
hi guys I'm working on a project where we load data from arround 50 different acapta system which we want to load in a DWH. The axapata systems export the data, based on a exact schema, to a csv file and send us this file. After that, we us a loop to
-
Multiple Filtering options within ALV Output.
Hi All, Being a Functional Guy,I would like to clarify few questions in ALV functionality. In one of our requirement we need to create a ALV report. Step1 : Enter values in selection criteria. Step2: Execute ALV report. Step3: Within Output I should
-
Hello. I must modify transaction MIRO. I want add to screen list of materials document and some logic (Z-table and connection between invoice and materials document). How i can modify MIRO screen or add my own. Have you any examples? Thanks so much f