Apple - Your CD Burning Problem is "Bush-League"

Guys,
This problem happend several years ago when you first came out with this product and we all hassled with it then - how frustrating that the same mistakes are happening years later.
Please work on this problem (upgrading to 9.0.1.8) causes itunes to not recognize a blank CD.
CF

Can you give ouput of groups, try putting a '#' in /dev/sr0 line see if that makes any difference
Do no forget changes to groups only take effect after logging out and in again.
MrG
EDIT you just beat to it
Last edited by Mr Green (2010-12-22 08:08:55)

Similar Messages

Apple TV worked until today. Message says unsupported signal check your output device. I have checked hdmi cable with another device and it's fine. Put on a different tv and same message. Went out yesterday and bought a new Apple TV and same problem.

Apple TV worked until today. Message says unsupported signal check your output device. I have checked hdmi cable with another device and it's fine. Put on a different tv and same message. Went out yesterday and bought a new Apple TV and same problem.

Which TV do you have.
You may wish to try the following:
Press and hold the menu and the up button simultaneously on the remote for six seconds, the Apple TV should then begin to cycle through the various resolutions available to it at 20 second intervals.. If you see a picture appear up on your screen, use the remote to scroll down to the OK option and select it.

Does your iPod have the dreaded apple logo/sad face problem? Here's help!

Hi, I'm Stan, and I've found some useful tips in solving this problem.
This mini-guide is based on what I've found on my old clickwheel 20GB, B&W iPod (actually my bro's. My own video pod works great).
Description of what I call the, "apple logo/sad face" problem:
When I press any button, the apple logo appears, then after a few impatient seconds, the sad face appears, showing "www.apple.com/support/ipod/" at the bottom. Apparently, many ppl have this problem.
iPod commands:
Hold down the following buttons for the following commands:
MENU + Select=Resets the iPod. This "exits" your iPod out of whatever mode, bringing up the apple logo, hopefully but most unlikely fixing your iPod.
|<< + Select= the secret diagnostic mode. You'll see: apple logo, then backwards apple logo for a split second (backlight will light up), then you'll see "IRAMPASS. HITPLAY CONTINUE". NOTE: '|<<' is known as the 'reverse' button. aka the 'rewind' or 'previous' button. it's the left button of the iPod. I got confused by the word, 'reverse' b4.
|| + Select= Disk Mode. You'll see a √, should say "OK to disconnect" and you'll see the battery icon and your battery life remaining. NOTE: '>||' is known as the 'play/pause' button. it's the bottom button.
Now then, now that we have that cleared, you're still wondering why your pod ain't going into either disk mode or diagnostic mode. Here's probably why:
My old, clickwheel 20GB pod can infact reset, disk mode, and diagnostic mode. According to Apple, you must reset your pod, then hold down the two buttons for whichever mode you want. I did this, and had no luck. For all you stumped fellows, try skipping the first step. In other words, when your pod is off, hold down |<< and Select without resetting. Same goes for disk mode.
Here's what my pod does, and what your pod may or may not do:
-Takes a really long time to go into disk mode, yet it's still possible.
-when attempting to connect to computer while in disk mode, it shows the normal "do not disconnect" screen, then reverts to the sad face.
-the HDD SCAN and HDD R/W SCAN don't work in diagnostic mode (Maybe they actually do, but I ain't waiting any longer).
-I've concluded that if you hear the whrring sound (sounds like the hard drive disk is struggling to spin properly, very quiet, must put pod close to your ear to hear it), your pod is "stuck" and won't do anything.
This mini-guide isn't a solution, but merely all of Apple's feeble advice put into words that iPod noobs can understand. So next time you read something like "try putting your iPod into disk mode, connect it, and hope it shows up in Disk Utility.". you'll be saying "it's not showing up!!" instead of "the sad face won't let me put it into disk mode!!"
hope this helps. Let's all do what we can to stop this problem.
peace

See if these help.
iPod shows only an Apple logo and doesn't start up.
Only the Apple logo appears when turned on.

Burn problem - "internal target failure"

Can anybody help me with a burn problem that is driving me crazy, especially as I am a recent migrant from Windows. Every time I burn in iDVD from an iMovie I get the error message at the burn stage, i.e. after 2 hours encoding etc. "The recording device reported the hardware error: internal target failure (0x44,0x00)". This is after reporting the problem to my dealer and having the Superdrive replaced under guarantee. Any ideas gratefully received.
iMac G5 Mac OS X (10.4.6)
iMac G5 Mac OS X (10.4.6)

Welcome to iDVD Discussions.
That may be a media/burning speed issue.
I recommend a disk image burned to Verbatim DVD-R at 4X or slower using Toast or Disk Utility.
David Pogue also recommends Verbatim on page 356 of his latest book:
iMovie HD & iDVD 6: The Missing Manual
Quoting David: "Cheaper brands don't use the same amount of organic dyes and are more likely to suffer premature deaths."
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
http://www.kenstone.net/fcphomepage/image_to_diskstone.html
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Burning Problem under leopard

Hi Everybody,
I'm writting here because I met a burning problem with my iMac CoreDuo. I manage to erase a DVD RW, but no way to burn a DVD or a DVDRW : the burn session begins, but stop after few minutes and eject the DVD (partially written).
I checked the RecordingDisc.log file, here are the logs (logs with LiquidCD App, but this is the same when I try to burn through MacOS directly):
LiquidCD: Burn started, Tue Jan 22 19:12:06 2008
LiquidCD: Burning to DVD+RW (MBIPG101 W04) media with DAO strategy in MATSHITA DVD-R UJ-846 FB2U via ATAPI.
LiquidCD: Requested burn speed was 47x, actual burn speed is 4x.
LiquidCD: Burn failed, Tue Jan 22 19:12:06 2008
LiquidCD: Burn sense: 3/73/03 Medium Error, Power calibration area error
LiquidCD: Burn error: 0x8002006D Le périphérique n'a pas pu calibrer le niveau de puissance du laser pour ce méd
and :
Disk Utility: Erase started, Tue Jan 22 19:13:54 2008
Disk Utility: Erasing DVD+RW (MBIPG101 W04) media in MATSHITA DVD-R UJ-846 FB2U via ATAPI.
Disk Utility: Erase finished, Tue Jan 22 19:14:16 2008
I tried to reinstall 10.5.1 update, but this didnt fix the problem.
So do you have an ideo to help me ?
Message was edited by: ewssk

I get this same error on my 2.4Ghz 15" MBP running 10.5.1;
System Profiler:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B02
SMC Version: 1.16f8
Serial Number: {No, Not Yours}
Sudden Motion Sensor:
State: Enabled
~/Library/Logs/DiscRecording.log:
Disk Utility: Burn started, Mon Jan 28 12:57:08 2008
Disk Utility: Burning to DVD+R DL (RITEK D01) media with DAO strategy in MATSHITA DVD-R UJ-857E ZA0E via ATAPI.
Disk Utility: Requested burn speed was 47x, actual burn speed is 2.4x.
Disk Utility: Burn failed, Mon Jan 28 12:57:21 2008
Disk Utility: Burn sense: 3/73/03 Medium Error, Power calibration area error
Disk Utility: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.
I have seen this sort of issue discussed in various other threads with suggested remedies of everything from Resetting the SMC to more bizzare (yet substantiated) recommendations of switching languages;
http://discussions.apple.com/thread.jspa?messageID=6164600&#6164600
http://discussions.apple.com/thread.jspa?messageID=5699813&#5699813
http://discussions.apple.com/thread.jspa?messageID=6240377&#6240377
I was able to burn DL DVD's with 10.4.11, which is what shipped with my MBP when I purchased it. I haven't had need to burn a another DL DVD until now, approx 4 months later.
Does anyone out there have any suggestions on this? At this point I'm pondering waiting to see if 10.5.2 resolves the issue. If not, I suppose a trip to the Genius Bar is in order.
Love,
shmoo

How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA input

Welcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC..

I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC.mit with my Mac i get that error.

Hi, I get error (-15006) when I try to connect air play true Apple TV. No problem with my old PC. with my Mac i get that error.
It is true the Ithunes I get the problem.
What can I do to fix this.
I also have problem some times to conect to my Ipad to Apple tv. Some time I have to restart my Ipad to get conection to Apple t. whay is that ?
can some one help me ?

Hi whitwick,
If you are having issues with your network connection when attempting to use AirPlay, you may want to use the steps in this article to troubleshoot -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L

How can I sync my IPOD Nano 4 to iTunes on my PC? I've already tried the sync button on iTunes and it says it is synced. I've also tried the 5 steps recommended by Apple to fix sync problems with no luck.

How can I sync my ipod nano 4 to iTunes on my PC? I've tried the sync botton on iTunes and the 5 steps recommended by Apple to correct sync problems with no luck.

How is your iPod configured to sync content from your iTunes library? Any error messages during the sync process?
You may want to reset warnings on the device by right->clicking on it under Devices and choosing Reset Warnings. Then resync the iPod to see if any alerts appear.
Is this the same computer you normally sync the Nano with?
B-rock

I have one iPhone 4s, one iPad 2 and wife's iPhone 4s. yesterday I have updated all with ISO 8 under one apple id, now my problem is that in same WiFi when Any of phone receive phone all the three gazettes ring simultaneously . how to resolve this.

I have one iPhone 4s, one iPad 2 and wife's iPhone 4s. yesterday I have updated all with ISO 8 under one apple id, now my problem is that in same WiFi when Any of phone receive phone all the three gazettes ring simultaneously . how to resolve this.
regards
rbv

Tell your wife to get her own Apple ID. If you do not want continuity/handoff to work with calls, on both devicesgo to Settings==>>FaceTime==>> Turn OFF iPhone cellular calls.

I have been getting java.lang.ClassNotFoundException: ZeroApplet.class and java.lang.ClassNotFoundException: JavaToJS.class crashes with JRE version 1.6.0_26-b03-384-10M3425 VM executing a Java Applet. Is Apple aware of this problem? No longer supported?

My web page uses a Java Applet to allow my visitors to replay chess games; the Chess Viewer Deluxe applet was written by Nikolai Pilafov some time ago and has been working properly for some time (until recently). I don't monitor this part of my site regularly so I am not sure when it began to fail. On his web site [http://chesstuff.blogspot.com/2008/11/chess-viewer-deluxe.html] he has a link to check LiveConnect object functionality (which fails for OBJECT tags). His recommendation is to "seek platform specific support which might be available from the JRE developers for your platform".
I have been getting java.lang.ClassNotFoundException: ZeroApplet.class and java.lang.ClassNotFoundException: JavaToJS.class crashes with JRE version 1.6.0_26-b03-384-10M3425 VM executing a Java Applet. Until I checked the LiveConnect object functionality, I was unable to identify the source of the console error messages. This does seem to be the smoking gun.
Is Apple aware of this problem? Are these classes no longer supported? Has anyone else had this problem? You can attempt to recreate the problem locally by going to my web page: http://donsmallidge.com/DonSmallidgeChess.html
Thanks in advance for any help you can provide!
Abbreviated Java Console output:
Java Plug-in 1.6.0_26
Using JRE version 1.6.0_26-b03-384-10M3425 Java HotSpot(TM) 64-Bit Server VM
load: class ZeroApplet.class not found.
java.lang.ClassNotFoundException: ZeroApplet.class
    at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:211)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:144)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
    at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:662)
    at sun.applet.AppletPanel.createApplet(AppletPanel.java:807)
    at sun.plugin.AppletViewer.createApplet(AppletViewer.java:2389)
    at sun.applet.AppletPanel.runLoader(AppletPanel.java:714)
    at sun.applet.AppletPanel.run(AppletPanel.java:368)
    at java.lang.Thread.run(Thread.java:680)
load: class JavaToJS.class not found.
java.lang.ClassNotFoundException: JavaToJS.class
    at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:211)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:144)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
    at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:662)
    at sun.applet.AppletPanel.createApplet(AppletPanel.java:807)
    at sun.plugin.AppletViewer.createApplet(AppletViewer.java:2389)
    at sun.applet.AppletPanel.runLoader(AppletPanel.java:714)
    at sun.applet.AppletPanel.run(AppletPanel.java:368)
    at java.lang.Thread.run(Thread.java:680)

I just went up to check the LiveConnect object functionality page AND IT WORKED THIS TIME! I must confess, this is very mysterious. I will do some more checking and reply here if I can determine why it is working now (and more importantly, why it didn't work before).

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

HT4437 I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect. What can I do to fix this?

I have successffully used my iPad with the Apple TV with no problem but just recently, the Airplay icon doesn't come up on the iPad anymore when I'm trying to connect. What can I do to fix this?

Try restarting your router as a first thing, this sometimes works for me.

TS2090 Apple TV mirroring - sound problem. Tried everything. It's ****.

I'm feeling totally exasperated. I've tried every 'solution' to the inherent Apple TV mirroring sound problem. Why don't Apple just fix it?? All I want to do is be able to view my computer video with sound when i want to. I don't feel that I should have to spend up to and over an hour trying repeated combinations of turning things on and off, entering code into Terminal, etc. EVERY TIME THAT I TRY TO MIRROR THROUGH APPLE TV. It's ridiculous, aside from the cost of buying the unit, I had to upload Mountain Lion despite the fact that my new (Early 2012) imac should have been on spec. That took hours and it still doesn't work. Very dissappointed, Apple have lost my brand loyalty for such an obviously fixable thing. ( I don't think that they read these comments). hope this makes you think twice before buying. Yours, m

I found a fix for this problem thanks to a friend of mine who I can only assume did a little research online!!
The problem I had was having AirParrot once installed, and after the recent 10.9.2 update, the third party app messed up the way Mirroring was working..
Here is the fix:
1. Open Terminal in /Applications/Utilities.
2. Run these commands respectively:
sudo rm -rf /System/Library/Extensions/APExtFramebuffer.kext
sudo rm -rf /System/Library/Extensions/AirParrotDriver.kext
sudo rm -rf /Library/Extensions/APExtFramebuffer.kext
sudo rm -rf /Library/Extensions/AirParrotDriver.kext
This will uninstall kernel extensions related to AirParrot. Other solutions around the web being posted are missing the extensions within /Library/Extensions.
3. Enter your administrative password when prompted.
4. Restart your computer.
I tried it once again and it worked like a dream!!!
Here is the article for reference:
http://9to5mac.com/2014/02/28/os-x-10-9-2-breaks-airplay-mirroring-and-desktop-e xtensions-to-external-monitors-for-some-users/
Many Thanks for all who tried to help, and especially Wasim!!
Hope this helps anyone with the same problem in the future!!

TS3623 Apple TV movie streaming problem

Hi Folks
When playing movies from my computer to Television via apple tv they play for 2-4 minutes the disappear leaving me to have to switch itunes off then back on again but after another 2-4 minutes the same thing happens. Any Ideas?? I've rebooted, reloaded and followed all the Apple stores suggestions but nothings working.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.
You might also try moving the Apple TV away from other electrical equipment.

Apple - Your CD Burning Problem is "Bush-League"

Similar Messages

Maybe you are looking for