Applecare not showing when checking serial number
Hello
i just bought an applecare and i went online to register, after i entered all the info i got a message saying that in a few weeks i was going to receive an email with the info.
I just check all the applecares i have register and this one it does appear there however when checking with the serial number of my PB it says that I have 28 days left to buy the applecare protection.
how long does it take for the info to apper under the serial number?
any thoughts?
Hi beu --
IMO, calling Apple on an issue like this is still your best bet, even if you're out of the country. It's also the best way to get real peace of mind that your AppleCare Protection Plan has been duly registered.
Here Apple's national and international telephone contacts.
Good luck.
JDee
Similar Messages
-
How do one validate Photoshop 13. (Windows 8) Upon activation, get through to sign in screen, but when doing serial number validation, validate goes round but does not validate. Connect Later is only way out of screen. Checked account but product not listed. Installed with serial number that was sent by Adobe. Have attempted numerous times at different times of the day. On-line connection working.
Have you bothered to do any research at all? Not every app was upgrade to 5.5. Those that weren’t will next be upgraded to CS6.
Bob -
Hi, I buy iPhone 4s 16G white new today, but when I check serial number on apple support, that is invalid serial number, the serial number is not recognised. Then I check by using IMEI, "our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. What is replacement product really is? I am still confused. Is it recondition product?
You purchased this iPhone today from where?
-
Do not recognize the exact Serial Number when Setup.
Do not recognize the exact Serial Number when Setup.
Invalid Serial Number. This is not a valid serial number.
Prease go Back and re-enter your serial number.
I am a old Korean.
I can not speak and write English well.
So I write this letter, as translated by Google Translator.
I ordered the PremiereElements 11 July 2, 2013.
I received an email from Adobe after I paid the price.
Serial number is
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
I have downloaded the "PremiereElements_11_WWEFDJ_win64.exe".
And I installed the program and I made some movie clips.
I used the PremiereElement11 well until this morning.
When I click a button for importing a clip, PremiereElement11 show me a error message.
"Cannot find a file", "Reinstall".
So I reinstalled.
In the "AdobePremiereElements11-Setup popup window" I wrote my name and select my Country and wrote serial Number exactly.
And clicked next button.
But "AdobePremiereElements11-Setup popup window" said
"Invalid Serial Number".
and
"Invalid Serial Number. This is not a valid serial number.
Prease go Back and re-enter your serial number."
I have tried many times.
As a result, I did not install.
How can I fix this?marusot
Google Translate from English to Korean
당신이 프리미어 요소 (11)와 현 버전이 아닌 12을 가지고 있기 때문에 어도비 채팅 당신을 도울 경우, 나는 확실하지 않다. 그러나, 그것은 것입니다 있는지 확인하기 위해 어도비와 어도비 채팅에 도달하기 위해 시도하십시오.
http://helpx.adobe.com/contact.html?step=PRE_adobe-ID 서명 - in_stillNeedHelp
어도비 채팅이 도움이되지 않을 경우, 우리는 여기에 우리가 할 수있는 최선으로 도움을 시도 할 수 있습니다.
당신은 1 사용중인 컴퓨터 운영 시스템?
2 당신이 프로그램을 다시 설치하는 경우 비활성화 바이러스 백신 프로그램과 컴퓨터의 방화벽 (들)이 있습니까?
우리는 당신의 결과를보고 할 것이다.
감사합니다.
ATR
English Version of the Above
Since you have Premiere Elements 11 and not the current version 12, I am not sure if Adobe Chat will help you. But, please try to reach Adobe and its Adobe Chat to find out if it will.
http://helpx.adobe.com/contact.html?step=PRE_adobe-id-signing-in_stillNeedHelp
If Adobe Chat does not help you, we can try to help here as best we can.
1. What computer operating system are you using?
2. Do you have the antivirus program and firewall(s) of the computer disabled when you are reinstalling the program?
We will be watching for your results.
Thank you.
ATR -
Hundreds of my iPhoto pictures will not be copied and will not show when I double-click on them. When I do in iPhoto an exclamation surrounded by a triangle appears. Though I can see the picture in the small tiles below it will not expand. I also cannot attach any of these pics into an e-mail or into any other file. I have already went through all 3 Repair options and when that did not solve it went through a complete Rebuild. Any Help?! Any Suggestions on how to fix this?! I have spent almost 2 days now going through all of the published help.
I have backups going back 6 months - I have not had the real need to check every album before - but - all of my backups also have this same problem.The triangle with the ! indicates that the connection between the thumbnail and the orginal is missing - this can be caused by many things including database corruption and user action emoving the originals photos on urpose or by accident
If the database is corrupted then rebuilding is the solution - backup and depress the option and command keys, launch iPhoto and rebuild your database -- if the iPhoto rebuild does not cure the problem then download iPhoto Library manager and use its rebuild command which creates a totally new library leaving the existing one untouched
If you have deleted the photos then you need to start over with a new library and import the photos you have not deleted into it
You can select one of the problem photos and use the reveal original in finder commander (file menu) to see if the original is there - if it is a finder window will open showing it
LN -
New CS6 on disk for Mac will not take my valid serial number; do I need to register the product before it will accept serial number and load on my Mac Book Pro?
Hi Erwin,
Please go through the below forum link and check.
https://forums.adobe.com/thread/1079210
Regards,
Anand -
Need to send my back up email a reset security questions email but the option does not show when I click on password and security
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97456) -
My control center and notification center are not showing when I swipe in there respective locations. Does anybody know why?
Thank you for the sugestion, but it was working fine both on the lock screen and on my home screen. I check all my settings and it is how it was from Friday, when I got the iPhone 5s. It just stop working. The only way I can fix it is by shutting down the phone. It will work for a while, then it won't.
-
Help: Records not showing when cube is placed under the Multiporivider
Hi Experts,
I have a Cube called Bcube with char Plant,calm year/month, material and Key Figure, Pqty
When I generate a report on this Cube, everything looks fine and I see plants, year, etc in the report
There are 2 other cubes:
MCube also has char Plant,calyear/month, material and Key Figure: Pqty, Sqty, TQty, AQty
DCube also has same as BCube: with char Plant,calyear/month, material and Key Figure Pqty
When I place all three cubes under the multiprovider, the values from the BCube does not show up in reports
e.g. in a simple report such as
Row : Plant
Columns: Pqty, Sqty, TQty, AQty
In the Multiprovider, under the Indentification of Characteristics, I checked the boxes for all three cubes whenever the same charactertic in all cubes showed up for identification: e.g..
InfoProvider InfoObject
Bcube----
Plant
MCube-------Plant
DCube -
Plant
and same for. e.g. 0Calyear
and same for Key Figures, e.g. I checked all 3 boxes for PQty which exists in each of the cubes
1. Why is my data for BCube not showing when reporting against the multiprovider?
2. what does it mean by checking the 3 boxes for Plant? and checking the 3 boxes for 0Calyear.
ThanksHi,
regarding your questions:
1. When I run listcube against the multiprovider, I only went to the output list to select the fields I needed in the output; then entered the particular cube e.g. BCube in the infoprovider field. That was it (NO other selection) and I got the described results I explained earlier. If you have a specific test for me to try, please let me know.
2. Please find the settings in both characteristics and key figures for all cubes in the MULTIPROVIDER maintenance screen:
Characteristic Assighment:
0calyear -- 3 boxes checked for BCube, DCube & MCube
Plant -- 3 boxes checked for BCube, DCube & MCube
0Material-- 3 boxes checked for BCube, DCube & MCube
Key Figure selection
PQty-- 3 boxes checked for BCube, DCube & MCube
Sqty --checked for DCube, this key fig is ONLY in DCube
TQty--checked for DCube, this key fig is ONLY in DCube
AQty--checked for DCube, this key fig is ONLY in DCube
I hope this helps you to guide me.
Or, were you referring to mappings in the transformations?
Thanks -
dear sir . I have bought a dell ipad under serial number DMPKQFF4F186 / UDID : 976ba8f5ba16f665bdf3b1b5ec53a172c9d65381. on 25th of dec.2013,it was packed and seems it was new after unpacking i found out it is locked.Ijust neednto know when this serial number has registered in icloud. I will grateful if you could let me this information. locking forward to your kind response. With Regards
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.
Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling -
Why "stop download video" feature not show when playing video
why "stop download video" feature not show when playing video,, i hope you can give me Solution for this problem because when i using 3g internet, it downlaod the video Quickly ,,, so it consume the Balance
Do you have Flash installed? Check HD > Library > Internet Plug-Ins
If the Flash Player app is not in the Internet Plug-ins folder, download and install from here.
When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu
Troubleshooting advice can depend on that information. -
Can I check serial number through MD04 ?
Can I check serial number through MD04 ? Is there any short way ?
Hi Deepak,
you can not directly check in TCode MD04 screen or planned order's
you double click to prduction order number and goto header menu --> serial number
or
IQ03 - display material serial numbers
Regards,
Sankaran -
My external hard drive does not show when I am trying to open a document in Office Org??
My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??
Does the drive show up under 'Devices' in Finder?
-
Preview icon not showing when in thumbnail. (Sketchu
Hello,
I recently updated my MBP to Yosemite and installed sketchup on it.
The preview icon of my sketchup files are not showing when in thumbnail. But as i increase the size of the icon from thumbnail in viewoption i.e from 64px x 64px to 124px x 124px it shows. So my icon is shown as blank without any app logo. Also when i change my view from thumbnail to coverflow or something it shows. Otherthan thumbnail everything works.
So where is the error in it?
Please help...
Thanks
AmarTry the standard fixes:
- Rest. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. - Restore from backup
- Restore to factory defaults/new iPod.
Maybe you are looking for
-
Hi All, Please how do i resolve this following error: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception. This comes up when i run my application online but doesn't occur when i run it during design.
-
I had some issue with my Firefox (it crashes when i starts), so i format my laptop to factory setting and now i got new Firefox installed and left with this Old Firefox Data folder. my question is : Ii understand the profile in my Old Firefox Data co
-
Vendor Evaluation : Manual changes
Dear All , We have taken Autometic vendor Evaluation for sm vendors . In One case i need to change manually the score for one criteria ? How to do the same ? REgards Edited by: venky shree on Sep 22, 2008 12:27 PM
-
What are the best practices to create surrounding borders?
Good day everyone, I was wondering what is the best practices to create a look in my iOS app like the one below? How are they accomplishing the creation of the borders, is there a tool in Xcode IB to do that? Thank you in advance
-
Any caveats for importing 2.0 applications to a 3.1 installation?
I have 2 applications that were developed on HTMLDB 2.0. I want to import them onto a machine running Apex 3.1. Additionally I plan on importing 3 schemas into the Apex 3.1 instance from the oracle instance connected to HTMLDB 2.0. Can anyone explain