Applecare Repair Turns Into a Broken Macbook Case

I'm from Texas, but this past Wednesday I made the trip up to New York City to check the sites. When I managed to get to the hotel, I got on my Macbook and checked out how to get to the nice ol' 5th Avenue store. All was well, we checked out the place, etc. I get back to the hotel and, to my amazement, my hard drive had completely died on me. The click was loud enough to hear across the room while the TV was blaring.
Luckily, I have an Applecare warranty, so I decided to bring it down to the store. Needless to say, they repaired everything. The new hard drive was installed and they replaced the chipped palm rests, but I now noticed that they apparently banged the bottom of the case on something. There is now a crack on the bottom of the case.
It is strictly cosmetic, it doesn't alter functionality at all. To be quite honest, I'm not all that worried about it. Though, what I am concerned about is the fact that the crack could continue to spread or, in the long wrong, cause another problem. I would just bring it back up to the store, but I leave tomorrow morning at 8AM to make my voyage back to Texas. To make matters worse, the nearest Apple store to my home is about 120 miles away.
Is there a way that I can contact Applecare and just make a note of the occurrence that way, if it does happen, they won't try and say it's my wrong doing. It doesn't seem like it was dropped, but it seems like it got a nice little whack against a table or something. The bottom of the case is also scratched beyond belief. I always set my Macbook on it's cloth case, so they weren't there before hand.
I'm simply happy it's functional, but it is more than frustrating that it comes back with additional problems.
Any input will be highly appreciated!

When you call AppleCare, have your paperwork from the 5th Ave store and give them the case number. Also, request a case number for your reporting this incident.
Good Luck
Adam

Similar Messages

Selection tool turns into pencil on MacBook Air

I'm using illustrator cc on a MacBook air. When I try to use the selection tool, It turns into a pencil and becomes useless.

I click on the selection tool.
I click or drag on the art board.
The selection tool turns into a pencil.
Sent from my iPad

Whoops - broken macbook case

Hello all,
Recently my Macbook has cracked at the bottom left hand corner of the case/shell which is now exposing some of the internals of the laptop. I'm a little worried about electric shocks when this is plugged in, as my left hand naturally sits over the cracked area.
It's also very sharp and hurts my wrist when using the laptop.
I was wondering if it's possible to get a replacement body for the Macbook or if it's cheaper getting a replacement model all together?
It's the November 2006 model, 2Ghz Intel Core Duo
Also, the plastic has broken where the screen 'ridges' touch the bottom of the case - this seems to be a common problem as I have read several posts saying the quality of the plastic on first gen Macbooks ain't all that!
Due to accidental damage, this might end up being an insurance claim so I'm interested to know what options I have before going down this path...
Any help would be greatly appreciated.
Thanks

You're talking about the area near the trackpad, right? Are you near an Apple store?
If the damage is what I'm thinking it is, repeatedly closing the computer has caused the plastic to crack away in that area. The bumpers on the display can put a lot of pressure on the plastic near the trackpad and it eventually cracks apart.
Sounds to me like you need the topcase replaced. If possible, head to an Apple store and talk to the folks there. You may be able to get it replaced for free (even if you're not under warranty), since this is a fairly common issue with the polycarbonate MacBooks.
If you can't get a free replacement, you can replace the topcase yourself fairly easily. The part costs about $40 on eBay.
~Lyssa

EMac freezes randomly, open window turns into broken up jibber

My eMac freezes randomly, open window turns into broken up jibber (kinda looks like I put a photoshop filter on it or something). I can't force quit when it does this, no error message, I've repaired permissions. Any ideas?

This doesn't help. but my first thought on seeing your picture was 'addressing bit failure in the video memory'. Unfortunately, as you already know, the video 'card' on the eMac is a chipset mounted to the logic board, and the only repair I'm aware of is replacement. An Apple Service Provider could give you an estimate but unless your eMac is still within the standard one-year hardware warrenty or you purchased the three-year ApplceCare extended warrenty, that's not an attractice cost-benefit tradeoff.
On the chance that I'm wrong and it's some unusual system corruption, look again for the Hardware Test disc. It can be tricky figuring out where it is; on early eMacs it was always a separate CD, on recent eMacs it's a partition on the Restore DVD, and on models in between, it depends on whether the OS X Install disc was on a DVD or not. You might try booting from your OS X Install or Restore disc using Startup Manager to see if Hardware Test is on a partition.
If nothing else, booting off the OS X Install disk (as if you were going to run Disk Utility > Repair Disk to check the drive) should further confirm if the problem is in the video hardware rather than in the hard drive's OS: if the broken display appears when booted from the OS X Install disc, it's pretty certainly the video hardware.

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

Hi T,
Either of these will give you the info you seek:
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html

MacBook doesn't turns into sleep mode and swop doesn't work.

MacBook doesn't turns into sleep mode and swop doesn't work.
Can you help me please. I have a MacBook Pro 8.2. I reinstalled OS X to make swop file working, but it still doesn't work. I reinstalled OS X from Internet recovery.
Start time: 10:31:02 03/15/15
Model Identifier: MacBookPro8,2
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 3 minutes
Memory
    BANK 0/DIMM0:
      Size: 4 GB
      Speed: 1333 MHz
      Status: OK
      Manufacturer: 0x029E
    BANK 1/DIMM0:
      Size: 4 GB
      Speed: 1333 MHz
      Status: OK
      Manufacturer: 0x029E
SerialATA
   TOSHIBA MK5065GSXF
Diagnostic reports
   2015-03-15 Boom 2 crash
   2015-03-15 com.apple.internetaccounts crash
Log
   Mar 15 10:26:10 memorystatus_thread: idle exiting pid 546 [tccd]
   Mar 15 10:26:11 memorystatus_thread: idle exiting pid 547 [nsurlstoraged]
   Mar 15 10:26:12 memorystatus_thread: idle exiting pid 544 [soagent]
   Mar 15 10:26:13 memorystatus_thread: idle exiting pid 548 [nsurlstoraged]
   Mar 15 10:26:43 memorystatus_thread: idle exiting pid 556 [com.apple.CodeSi]
   Mar 15 10:26:44 memorystatus_thread: idle exiting pid 558 [accountsd]
   Mar 15 10:26:45 memorystatus_thread: idle exiting pid 553 [com.apple.iCloud]
   Mar 15 10:26:46 memorystatus_thread: idle exiting pid 561 [networkd_privile]
   Mar 15 10:26:47 memorystatus_thread: idle exiting pid 555 [secinitd]
   Mar 15 10:26:48 memorystatus_thread: idle exiting pid 560 [tccd]
   Mar 15 10:26:49 memorystatus_thread: idle exiting pid 562 [secd]
   Mar 15 10:26:50 memorystatus_thread: idle exiting pid 554 [com.apple.intern]
   Mar 15 10:26:51 memorystatus_thread: idle exiting pid 565 [nsurlstoraged]
   Mar 15 10:26:52 memorystatus_thread: idle exiting pid 563 [soagent]
   Mar 15 10:26:53 memorystatus_thread: idle exiting pid 551 [syncdefaultsd]
   Mar 15 10:26:54 memorystatus_thread: idle exiting pid 557 [CoreServicesUIAg]
   Mar 15 10:26:55 memorystatus_thread: idle exiting pid 567 [iconservicesd]
   Mar 15 10:26:56 memorystatus_thread: idle exiting pid 566 [iconservicesagen]
   Mar 15 10:26:57 memorystatus_thread: idle exiting pid 568 [systemstatsd]
   Mar 15 10:26:58 memorystatus_thread: idle exiting pid 550 [cfprefsd]
   Mar 15 10:26:59 memorystatus_thread: idle exiting pid 552 [cfprefsd]
   Mar 15 10:27:00 memorystatus_thread: idle exiting pid 549 [coreduetd]
   Mar 15 10:27:01 memorystatus_thread: idle exiting pid 564 [nsurlstoraged]
   Mar 15 10:28:18 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
   Mar 15 10:29:09 proc 316: load code signature error 4 for file "Boom 2"
I/O per process: coresymbolicati (UID 0) is using 15 MB/s
kexts
   com.globaldelight.driver.Boom2Device (1.1)
Daemons
   com.apple.installer.osmessagetracing
Agents
   com.apple.AirPortBaseStationAgent
   com.globaldelight.Boom2Daemon
Extensions
   /Library/Extensions/Boom2Device.kext
   - com.globaldelight.driver.Boom2Device
   /System/Library/Extensions/EPSONUSBPrintClass.kext
   - com.epson.print.kext.USBPrintClass
   /System/Library/Extensions/JMicronATA.kext
   - com.jmicron.JMicronATA
Applications
   /Applications/Boom 2.app
   - com.globaldelight.Boom2
   /Applications/Boom 2.app/Contents/Library/LoginItems/Boom2Daemon.app
   - null
Bundles
   /Library/Printers/Canon/BJPrinter/Plugins/BJNP/CIJNetworkIOM.plugin
   - jp.co.Canon.ij.print.iom.CIJNP
   /Library/Printers/Canon/BJPrinter/Plugins/BJNP/CIJNetworkPBM.plugin
   - jp.co.Canon.ij.print.pbm.CIJNP
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/BJUSBIOM.plugin
   - jp.co.canon.bj.print.bjusbiom
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/BJUSBPBM.plugin
   - jp.co.canon.bj.print.pbm.USB
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/CIJUSBClassDriver.plugin
   - jp.co.canon.ij.print.CIJUSBClassDriver
   /Library/Printers/Canon/BJPrinter/Plugins/BJUSB/CIJUSBClassDriver2.plugin
   - jp.co.canon.ij.print.CIJUSBClassDriver2
   /Library/Printers/Canon/BJPrinter/Plugins/IJBluetooth/IJBluetoothIOM.plugin
   - jp.co.canon.ij.print.ijbluetoothiom
   /Library/Printers/EPSON/CIOSupport/CIOHelper.plugin
   - com.epson.print.plugin.CIOHelper
   /Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin
   - com.epson.print.plugin.USBPrintClass
   /Library/Printers/EPSON/CIOSupport/XIOP.plugin
   - com.epson.print.plugin.XIOP
   /Library/Printers/EPSON/CIOSupport/XIORemoteClient.plugin
   - com.epson.print.plugin.XIORemoteClient
   /Library/Printers/EPSON/CIOSupport/XIORemoteServer.plugin
   - com.epson.print.plugin.XIORemoteServer
Restricted files: 219
Elapsed time (s): 238

Remove "Boom" and test.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Prevent my MacBook Pro to turn into sleeping mode

How can I prevent my MacBook Pro to turn into sleeping mode when playing music on it with Itunes?

System Preferences -> Energy
Put slider to "Never". But this will prevent your Mac to never turn into sleeping mode, not just when playing music.

All icons on my Macbook have turned into blue circles?

All icons on my Macbook have turned into blue circles. Please help.

Might be corrupted Safari preferences...
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Safari/WebpageIcons.db
Click Go then move the WebpageIcons.db file to the Trash...
Quit and relaunch Safari. Webpage icons should reflect the sites you visit now.

My iphone 4 screen turns into blue, and i can't do anything because my power button is broken. How to fix my iphone back? Please help me

my iphone 4 screen turns into blue, and i can't do anything because my power button is broken. How to fix my iphone back? Please help me

I am having the SAME exact problem! Except instead of lock button broken it's my home button so I can't do the whole "put in recovery mode" deal. My screen only says "tap the home button 3 times" and it has my screen locked until I hit the home button but since it is broken I can't get in my phone at all. I have all of my work info in my phone so I'm screwed and can't get any help. PLEASE let me know if you find a way around this...!!!
Thanks!

Why are my dock applications turning into question marks after restarting my macbook pro?

So i have had my new MBP with retina display for a few weeks now, and everytime I shutdown or restart the computer, I have a bunch of question marks in my dock instead of my application icons. The question marks still show the name of the application under them, and after I click them they turn back into the proper icon. I noticed that they are only applications I have installed myself off the internet. It never happens to the applcations that came with my macbook, or apps from the mac app store. I have not moved the location of the applications i installed, so i dont know why the computer is having trouble displaying the icons. I am new to the mac operating system and am wondering if I may not have installed these applications properly. The apps that are constatly turning into question marks include Bittorent, VLC Player, PS3 Media Server, Air VIdeo Server, and the Dolphin gamecube emulator. I have looked all over the internet but i cannot find a solution. Please Help!

When they go grey, it means that they have lost the location of the application that they represent.
If you put your mouse over each one, it will tell you what application it is that it has lost.
Go to wherever you have that application stored, usually the applications folder, and drag the icon of the application down into the dock. A new icon is created for you.
Repeat with the other two grey icons in the dock.
To remove the grey icons, left click and hold while you drag the icon out of the dock and onto the desktop. Release the mouse button and the icon will disappear in a puff of smoke.

My cursor turns into a revolving rainbow disk. How do I repair this problem?

My cursor turns into a revolving rainbow disk and remains frozen in that state. The only way I can "unfreeze" the disk is to turn off the computer and reboot. What is causing the problem and how do I fix it without rebooting?

Thomas,
What you are referring to is called the Spinning Beach Ball of Death and can be caused by many things. One of the most prominent is a lack of RAM. Keep Activity Monitor open (Applications - Utilities - Activity Monitor) and the next time you have a SBBOD take a look at AM and see how much Free RAM you have. You will find this information under the System Memory tab. As a general rule of thumb if it's less than 500MB you probably need a RAM upgrade.
You can also read and apply information from the Spinning Beach Ball of Death article.
Also did you know you were posting in an iMac forum?
Roger

After deleting some unnecessary Apps in my Macbook Pro, I plugged my thumb drive to discover that I can't open my files, which I normally can, because they've turned into ".lnk" files. Please help.

I have files in my thumb drive that I cant open. Inside my thumb drive, I've organized files in folders but I have files I havent put in folders yet. Those files turned into .lnk files.
My theory is, my thumb drive caught a virus from another laptop because I copied files from my colleagues laptop.

There are no viruses for a Mac, new theory required. .lnk files are aliases to a file, what did you delete?

Menu fonts all turn into boxed capital "A"s

At some point last night, while I was working on my 10.4.9 PowerMac G4, something happened and my menu fonts all turned into some glyph that looks like a capital "A" inside of a box. All of the text on the desktop, menu bar, window titles, and the left side of a finder window have this change. Files displayed within a finder window, however, do not.
Does anyone have any idea of what might have gone broken to cause this, and ideas on what I can do to try to fix it? I'd rather not reinstall if that's an option.
I've run Disk Utility and DiskWarrior to make sure the drive is up to spec, and it checked out.
PowerMac G4 Dual 1Ghz (MDD) Mac OS X (10.4.9)

Would it be possible to replace that font from
another 10.4.9 system?
Sure, from any OS X system at all. But I imagine you
still have Lucida Grande (look in
System/Library/Fonts) and I doubt replacing it will
help. Worth a try, but I think the problem is
something messed up in the OS that makes it think the
font is gone.
That, also, appears to be the case. Sigh. Looks like it's reinstall time.
Thanks for the tips, though!

Broken Macbook Pro won't finish copying even with target disk mode. Help!

Hi,
I'm helping someone with a Macbook Pro 2010-11. It worked for a few years but eventually degraded last month when it wouldn't go 10 minutes without displaying the rainbow loading ball. Possibly a hard drive problem.
The owner never backed any of the computer up. I am trying to salvage their data before it's lost. The computer can power on. I have been turning the computer on and salvaging most of the data from numerous trips with USBs until it crashes, and then moving on to Target Disk Mode. The computer turns on slowly, displays the rainbow ball every minute or so, and never finishes copying or exporting anything. It still seems to be degrading.
I still need two things: One is a large folder with thousands of old OUTLOOK e-mails created on an old PC (which the owner no longer has).
Second is the folder/autobackup where OUTLOOK for Mac stores all the e-mails and settings.
I have found the folder -- I think it is the Main Identity or Office Identities. Am I correct? Will this bring back OUTLOOK on the newer Macbook Pro exactly like on the old one? I also know where the old e-mails folder is, but when I try to transfer either folder through Target Disk Mode on the newer Macbook Pro, it stops and gives me the "Some data in _____.olk14msgsource could not be read or written." AKA error code -36, halfway through the transfer.
I have tried exporting OUTLOOK on the broken Macbook Pro to a .olm, but it gets stuck halfway and gets stuck back on the rainbow ball. Then I shut the computer off. I have also tried going into the folders through target disk mode and deleting the .olk14msgsource files that are problematic, but there are too many of them.
Please help! The owner needs these files and OUTLOOK exactly like it was!
Thanks!

Tried connecting the cable? Still won't start?
If you are still under warranty and/or have AC, call them & let them deal w/it.
OOW: Take the MBP to your local AS or an AASP. Diagnostic testing is FREE!
http://support.apple.com/kb/TS1365 Intel-Based Apple Portables: Troubleshooting a computer that will not power on

My "Documents" icon in the dock has turned into a question mark.

On my MacBook Air my documents icon has disappeared and turned into a question mark. The icons have also disappeared within my Documents folder and some of the applications folders. Where did they go and how can I get them back?

Where they went is a good question, and not one we can answer without a lot more information. However, the Dock is pretty resilient at finding things like this if they are accidentally moved into another folder. So, unfortunately, I'd have to guess that it has been deleted. If that is the case, your question about getting them back can only be answered with another question: do you have backups?

Applecare Repair Turns Into a Broken Macbook Case

Similar Messages

Maybe you are looking for