Appledevicemobileservice.exe 50% CPU

appledevicemobileservice.exe 50% CPU with Windows Seven
Help me
Thanks

To secure the best result, you will want to remove DAQmx and MAX, and install the latest versions of both. There is no other clear path to fixing the many problems that can arise with nimxs, after upgrades.
Machine Vision, Robotics, Embedded Systems, Surveillance
www.movimed.com - Custom Imaging Solutions

Similar Messages

How do I lower the applemobiledeviceservice.exe*31 cpu usage?

How do I lower the applemobiledeviceservice.exe*31 cpu usage? It is running between 10-16% of my cpu usage for my laptop. Even if I shut it down in the windows task manager it starts back up in a few minutes. I am running windows 7.
Thank You for your help with this.

Michel Chaouli wrote:
I also ran Onyx and did all the maintenance steps.
Did you also do all the cleaning steps?
OnyX clears the dyld cache
Run through the Steps here
..Step by Step to fix your Mac
Also this
Why is my computer slow?
Eliminate a Wifi issue by connecting a Ethernet cable directly to your router or modem (power off/on)
If your still having beachball issues, what I suspect has occured (which a lot of people mistakenly do) is the hard drive got sectors damaged when the computer was moved/bumped while it was in operation.
The fix for this (and anything else) is rather drastic, all user data off the Macintosh HD will have to be removed, the entire partition Disk Utility > Erase with Secure Zero (or middle selection option), OS X reinstalled and updated, programs reinstalled and files returned.
If one has a previous uneffected bootable clone or TimeMachine backup that can be used to restore.
Most commonly used backup methods
Reducing bad sectors effect on hard drives

TMG Microsoft Firewall Service Process (wspsrv.exe) high CPU. CPU Usage 100%

TMG Microsoft Firewall Service Process (wspsrv.exe) high CPU.
CPU Usage 100%
Please help me.
Thanks

Hi,
Since there can be multiple reasons for this issue, you can
capture a manual dump of the wspsrv.exe process on TMG server or find some related logs to better analyze this issue firstly.
In addition, what have you done before you encountered that issue?
If you have any third-party programs installed, you can temporary disable them and restart the firewall service to see if the issue persists.
For more detailed information, please refer to the links below:
How
to capture a manual dump of the wspsrv.exe process on TMG 2010?
Using
DebugDiag 1.2 to Automate Dump Analysis – TMG High CPU Utilization Scenario
Best regards,
Susie

Mobiledeviceservice.exe hogs CPU

mobiledeviceservice.exe hogs CPU. It takes 98 to 99 % of resources. Trying to upgrade the operating system to 5.0 but its been hung up in the back up process for 4 hours.

I have a single core laptop it won't work eats 99% of cpu, it's the mobile device service. I couldn't update my iPhone 4 to the latest iOS5.
Also I can't access iTunes to get my contact list or music from iTunes with my new iPhone 4S because I have to update to iTunes 10.5 to do that or buy a quard core laptop.
I do have two quard core PC's on in shop and one in bits, but my laptop was always my backup, maybe I need a new laptop but can't afford one atm.

Isa 2006 wspsrv.exe high cpu load

I have an ISA 2006 Server which run for 5 years without any problem. As the hardware is getting old now I have decided to change the Hardware to a new server but was unable due to the hardware to install Server 2003 which ISA runs only on this one as it
is 32-bit. I then decided to install server 2008 R2 and install isa 2006 on a vm. Installed all updates patches on server 2008 and the 2003 running on VM, SP1 for ISA.
Everything went fine, transferred the rules and Exchange and everything works fine. However, every day, two days three days, very randomly and no systematically timeframe isa 2006 wspsrv.exe get a 99% high cpu load and then the service makes
the internet to stop. No internet access anymore, no ping by name or IP. Rebooting the server fixes that problem until it happens again. It also happens during different time when people are working or even during the weekend when noone is
working on the system.
I have no idea anymore what I could do next. ISA is the only thing installed on the Server
Any help would be appreciated

Hi,
The blog analyzed a scenario that the high CPU is caused by the third party driver. You could refer to the steps in the blog to troubleshoot this issue.
Quote:
What we can conclude here is that we have a condition where wspsrv.exe was allocating more and more threads without releasing resources (releasing threads) because it was getting stuck waiting for an answer from kernel driver.
Some threads were working on I/O, mainly socket and LRPC call (almost socket) that run in Kernel mode. The third party driver is causing every AFD call to take more time and more CPU cycles, the fact that ISA is extremely using sockets amplify the problem.
The third party kernel driver was uninstalled from ISA Server and the issue was resolved.
ISA Firewall Service Process (wspsrv.exe) high CPU utilization issue
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Distnoted.exe high cpu

hello. i have noticed lately that when i open itunes on my laptop and then closing afterwards the distnoted.exe in cpu usage is very high.almost 38%.is there any solution for this?

This has been an issue for about a year at least for me and there have been complaints on it back when I first encountered it. For some reason it is never addressed.
I have learned to have the task manager open BEFORE closing iTunes. It happens every time I close it out.
What ticks me off more, is that distnoted is used with iPhones and iPod Touch devices and I have a iPod Nano with is not used for my iPod (according to what info I can dig up at other sites) Why am I being hung up by a utility that is not needed for my apple device?
If someone ever develops an alternative software package I can use to sync my iPod, I would drop iTunes over this.

System (ntoskrnl.exe) high cpu usage in Windows 8.1

Sir/Mam,
I'm having this issue since last week, when i checked it is the "system" (ntoskrnl.exe) file which is using upto 18-24% of my CPU and causing all other applications to stutter for a second (incluuding Media player, mouse pointer, everything).
By using a Process Explorer software i found out that it's related to these values running under that file:
" ntoskrnl.exe!RtlSidHashLookup+0x1ffc "
It slows down my PC for a second and it happens after every 5-6 seconds (approx.).
Using Microsoft Windows 8.1
Lenovo Z50-70
Need help.

Hi,
The WPA shows that it is WmiPrvSE.exe (WMI Provider Host)that occupies up to 20% CPU, and three threads are the causes, 8328\7988\8828. but hard to find deeper information from this, so please use process Explorer or process monitor to find more information
about WmiPrvSE.exe and the 3 threads, you can refer to this link
http://social.technet.microsoft.com/Forums/en-US/77f8bc7d-663c-4c33-b732-f362c5585300/service-host-local-system-is-intermittently-using-30-of-my-cpu-windows-81?forum=w8itproperf
Regarding to the wireless or LAN driver, I suggest you update the driver to latest version if it doesn't work fine.
Yolanda Zhu
TechNet Community Support

11.3.1 FRU1 zenworkswindowsservice.exe high cpu after login

Hi,
I just upgraded the primary & all satellites from 11.3.1 to 11.3.1 FRU1.
With the client upgrades everything goes fine. 11.3.1 to 11.3.1 FRU1 via assignment via ZCC.
After that we changed the client in the add on of the image.
When we restore a new image with that new Agent. The zenworkswindowsservice.exe goes to 60 % CPU when you login the first time with the user. User is created via a DLU.
It stops after you reboot the system... then everything is fine.
So next thing I did restore a new image with the old agent 11.3.1 , login with the same user again. Here there is no issue..
Is this a know issue in the ZEnworks 11.3.1 FRU1 agent?
Kr,
Joeri

Originally Posted by CRAIGDWILSON
I don't know but the suggested fix is to apply the "DisableExplorerRestart" registry key.
https://www.novell.com/documentation...a/bvj1efc.html
This key should not be harmful and may even be generally beneficial.
By Default, ZCM restarts the Explorer.exe process after applying a GPO.
In General, this causes no harm but we are unsure of why this was initially done.
It may simply be legacy behavior.
Since it generally causes no harm, it is simply retained as default behavior.
It most commonly causes issues on Terminal Servers where sometimes Explorer.exe does not come back, though even here very few customers have seen this.
Feel free to try disabling the Explorer.exe restart function.
I have never heard of any reports where doing so had a negative impact, even with GPOs in place.
Hi Craig,
I have done the registry settings but without success the same issue occurs:
First I have set the registry, then reboot the pc because it is a HKLM value. Login first time as the user and the high load occurs again.
As I already told, after logging in as the user to high load appears and I had to reboot to make the issue go away. Today I noticed that without rebooting the high load stops after 39 minutes.
Do you know what could cause this?
It is strange that we do not have this issue with the previous version of the client (11.3.1)...
Kr,
Joeri

Sppsvc.exe High cpu usage since 4/6/2015

sppsvc.exe using 60% to 80% of cpu since 4/6/2015 in Windows Server tech preview. Is this due to a update or the upcoming 4/15/2015 expiration date for build 9841? This has not been a problem up until now. Any ideas?

I've just tested it with the latest version of Firefox and the CPU usage is
rising in line with the number of IDX files.
Unfortunately I can't EASILY test the applet with IE6, I'm waiting for a
response from my partner to see if anyone uses IE6 with the applet.
Thanks
Arth

Microsoft.Exchange.Search.ExSearch.exe has CPU pinned for 8 hours

I made some changes to my Exchange server today allowing for larger attachments. I changed the limits on the transport settings and all of the send and receive connectors. I also updated the web.config for OWA to allow up to 50MB. This part went fine.
However, when the changes were done and I rebooted the server, I noticed the server was running very slow. I have found that the Microsoft.Exchange.Search.ExSearch.exe process has had the CPU maxed out ever since the reboot. This is a very small installation
of exchange, currently there are less than 10 users and I would guess well less than 1000 total messages per day. I did send one 20MB test file, but that is it. Any idea what is causing this process to run like this?

I had a similar issue after installing rollup 3 for 2010. Had a few entries in my event log about exsearch.exe like the one bellow. After i mounted the store that was offline everything started to run normal again.
Log Name: Application
Source: MSExchange Search Indexer
Date: 06-04-2010 13:05:15
Event ID: 104
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: SRV-INT1-MBX-02.corp.local
Description:
Exchange Search Indexer failed to enable the Mailbox Database Mailbox Database 0770182310 (GUID = 47465cce-f302-4e5e-b307-dcbe76b6d79d) after 1 tries. The last failure was: Microsoft.Mapi.MapiExceptionMdbOffline: MapiExceptionMdbOffline: Unable to Get Catalog
State (hr=0x80004005, ec=1142)
Diagnostic context:
   Lid: 1494 ---- Remote Context Beg ----
   Lid: 60049 StoreEc: 0x8004010F
   Lid: 49469
   Lid: 65341 StoreEc: 0x8004010F
   Lid: 56125
   Lid: 47933 StoreEc: 0x8004010F
   Lid: 32829
   Lid: 49213 StoreEc: 0x8004010F
   Lid: 48573
   Lid: 64957 StoreEc: 0x8004010F
   Lid: 31321 StoreEc: 0x476
   Lid: 1750 ---- Remote Context End ----
   Lid: 19154 StoreEc: 0x476
   Lid: 22081 StoreEc: 0x476
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown)
   at Microsoft.Mapi.ExRpcAdmin.CiGetCatalogState(Guid mdbGuid, Guid instanceGuid, Int16& catalogState, Byte[]& blob)
   at Microsoft.Exchange.Search.CatalogState.GetConfigDataFromPropertyStore()
   at Microsoft.Exchange.Search.CatalogState.get_PropertyBlob()
   at Microsoft.Exchange.Search.Globals.DoesCatalogExist(CatalogState state)
   at Microsoft.Exchange.Search.Globals.CheckAndInitializeCatalog(CatalogState catalogInfo)
   at Microsoft.Exchange.Search.Driver.ProcessNewCatalogInternal(CatalogState catalog, List`1 mdbsToCrawl, Int32& numberOfDisabledMDBs). It will retry after 10 minutes.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
   <Provider Name="MSExchange Search Indexer" />
   <EventID Qualifiers="49156">104</EventID>
   <Level>2</Level>
   <Task>1</Task>
   <Keywords>0x80000000000000</Keywords>
   <TimeCreated SystemTime="2010-04-06T11:05:15.000000000Z" />
   <EventRecordID>31811</EventRecordID>
   <Channel>Application</Channel>
   <Computer>SRV-INT1-MBX-02.corp.local</Computer>
   <Security />
  </System>
  <EventData>
   <Data>Mailbox Database 0770182310</Data>
   <Data>47465cce-f302-4e5e-b307-dcbe76b6d79d</Data>
   <Data>1</Data>
   <Data>Microsoft.Mapi.MapiExceptionMdbOffline: MapiExceptionMdbOffline: Unable to Get Catalog State (hr=0x80004005, ec=1142)
Diagnostic context:
   Lid: 1494 ---- Remote Context Beg ----
   Lid: 60049 StoreEc: 0x8004010F
   Lid: 49469
   Lid: 65341 StoreEc: 0x8004010F
   Lid: 56125
   Lid: 47933 StoreEc: 0x8004010F
   Lid: 32829
   Lid: 49213 StoreEc: 0x8004010F
   Lid: 48573
   Lid: 64957 StoreEc: 0x8004010F
   Lid: 31321 StoreEc: 0x476
   Lid: 1750 ---- Remote Context End ----
   Lid: 19154 StoreEc: 0x476
   Lid: 22081 StoreEc: 0x476
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, SafeExInterfaceHandle iUnknown)
   at Microsoft.Mapi.ExRpcAdmin.CiGetCatalogState(Guid mdbGuid, Guid instanceGuid, Int16& catalogState, Byte[]& blob)
   at Microsoft.Exchange.Search.CatalogState.GetConfigDataFromPropertyStore()
   at Microsoft.Exchange.Search.CatalogState.get_PropertyBlob()
   at Microsoft.Exchange.Search.Globals.DoesCatalogExist(CatalogState state)
   at Microsoft.Exchange.Search.Globals.CheckAndInitializeCatalog(CatalogState catalogInfo)
   at Microsoft.Exchange.Search.Driver.ProcessNewCatalogInternal(CatalogState catalog, List`1 mdbsToCrawl, Int32& numberOfDisabledMDBs)</Data>
   <Data>10</Data>
  </EventData>
</Event>

IPCC 4.0(5) sqlservr.exe spikes CPU

I have a customer with an IPCC Express servers running version 4.0(5). OS 2004.4SR5. Every second the sqlservr.exe process spikes the CPU to near 100%. I tried rebooting the server and get the same thing.
When I shutdown the IPCC services the spiking stops.
Any Ideas
Greg

Do you all have any external database servers performing data dips for reporting or wallboards accessing the info for real time data ? If yes just for testing stop these connection and check the CPU cycles for SQL process.
Regards
Anuj

Microsoft.Exchange.AddressBook.Service.exe 100% CPU Usage

Hi,
We have an exchange server 2010 and the Microsoft.Exchange.AddressBook.Service.exe used 100% CPU Usage suddenly. However, after rebooting the server, the CPU Usage of the above .exe is back to normal. Client cannot connect to the exchange server during
the high CPU Usage of the above .exe.
Any ideas for the above problems? Thank You.

Hi
Microsoft.Exchange.AddressBook.Service.exe is related to OAB function.
Maybe mobile or client fails to download will cause this problem.
What was the fix for this?

6380 wireless finds Vista machine but not XP machine - scan from XP hangs - hpqdstcp.exe hogging cpu

Hello,
Having some trouble with my new 6380 all-in-one.
Installation is wireless on 802.11g Linksys router. One machine is Windows Vista Home the other a laptop running XP.
When I scan from the 6380 it does not offer me a choice of computer - it simply scans over to the Vista machine.It does not appear to know the XO machine is there.
If I attempt to run the scanner via "Solution Center" from my XP machine and attempt to run scan or access scan settings the application hangs with its initial popup window. Other settings unrelated to scanning ARE accessible from the XP running Solution Center.
I have also repeatedly had the XP machine slow to a crawl and Process Manager indicates hpqdstcp.exe using 70-90% of cpu.
I AM able to print to the 6380 from the XP machine.
I AM ALSO able to scan to the XP if I am running my paint program (Paintshop Pro) and select the 6380 as the TWAIN device.
On the XP machine: I have Avast Antivirus running, Windows Firewall and Spybot Resident. Firewall has a long list of hpq*.* programs on its exception list and I have added a few more from the bin directory just in case.
I have tried running the "Solution Center" with the antivirus and spybot disabled and the firewall OFF - no change.
I have tried uninstalling and re-installing the software on the XP to no avail.
Had a Canon LidoScan scanner connected to the XP machine via USB prior to this. Removed it and uninstalled.
Have a Dell color Laser connected to the router via USB.
Ran a registry cleaner having read somewhere that this problem had to do with a registry error.
I would surely appreciate your thoughts.
thanks,
Daryl

I hope this document helps resolve this issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00457223&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Performance Problem: qttask.exe 100% CPU

I have a new 2nd Generation iPod Shuffle. So I only want music files, and at this point they are all from my existing CD's and Windows Media Player files.
I run on an HP machine 640 mb memory, AMD 1295mhz running Windows XP Home SP 2. Definitely an old dawg.
I loaded iTunes and QuickTime. Everything works but the qttask.exe program runs at close to 100% CPU even with iTunes closed. Which slows everything down a bit...
I could not get iTunes to run w/o QT. I unchecked all of the video and graphics selection and updates on QT, but no luck. Does anyone have suggestion for settings or one of the QT 'clones' that don't have or use all of that video overhead or ???
Thanks!
Grutzbo

I am not sure why, but after doing all of the cleanup, unload and re-install recommended by Apple - the gttask.exe still ran at 100% CPU. So I took a shot at your recommendation and unflagged it in the Startup tab in the msconfig menu.
And iTunes seems to be working ok and the CPU usage bounces around between 30%-50%. Which aint bad for this broken down old box! So thanks, Mr Black!!
I am of course curious about what qttask.exe is supposed to do and why everything works without it? But I don't understand how water gets into the upstairs faucet so I don't need to know unless there is some risk. (I only use it for my G2 Shuffle so I can live without most of QT functionality.)
Thanks again!!
HP Windows XP Old Dawg

Creative X-FI Elite Pro + Windows Vista = Audiodg.exe 60%+ CPU Please He

Hi,
I got a problem with the Audiodg.exe process, problem is that sometimes it uses from 5% cpu and jumps to 50% and more and when playing this makes everything choppy and even cause mouse lagg..
As fast as i tab down the game the process drops to 5-0 and if I tab in again it jumps and holds on for several sekunds/minutes and then everything works fine and some minutes later it starts again.
This Hapends when playing all sort of games but mostly hapends in Counter Strike Source, and Windows Media Player, when watching films or listening to music but when doing that it gets worse and making the sound to lagg or slowdown etc.
Any idea got all the latest drivers exept for bios becouse Asus bios are unstable, and i cannot switch audio drivers becouse i got 4gb of ram and only the latest creative drivers work with 4gb...
Hope you understand everything
Spec:
OS: Windows Vista x64 Build Version 6.0.600 (SP ENG)
Motherboard: Asus Crosshair nForce 590sli
CPU: AMD 5200+ FX-62 Dual Core Black Edition
RAM: 4xgb Corsair Dominator 066mhz (running only 932)
Sound: Creative Elite Pro
GFX: nVidia Gainward 8800GTX
PSU: CoolerMaster Real Power 000watt
HDD: 2x Western Digital Raptors X (2x50gb)
IDE: x DVD Liteon x8 burner and x CDRW Lite On Burner x52
USB 2x USB Devices Mouse and Keyboard
Lan Ethernet cable
Lan2 Disabled
Nothing gets overheated etc...
Everything got latest drivers etc...
Hope thats all, Best Regards C0MM4NDER

I didnt have this issue before to, it just starded after my reformat when i noticed that my cpus where on 100% in a game and then noticed that it was a process called Audiodg.exe that eats everything.
Im running software from my Creative Vista CD + updates from Creative Site, (and the 10006. driver from this site.) and no no codec packs installed yet. nothing this is a clean install only standard programs running installed only nod32 creative software and defrag software. and i used this before when i didnt have this problem only new is the drivers that i NEED becouse i use now 4gbs of ram and, this is the only hardware change from format, i had 2gb then now i got 4gb and i downloaded the latest driver, maybe its is the problem, but i need this driver.
Im 100% its the drivers because i've seen many other issues like this with other Audio companies that fixed it with a driver update, exept Creative "wow thats some news" i've allready talked at Technet on Vista 64 forums and person told me that it a driver issue.
Another proof is that if i run windows doing nothing Audiodg.exe uses constantly 0-4% of my CPU, if i start a mp3 its jumps to 6-8% if i turn of Cmss3d in Creative Console it drops instantly to 0% and stays there all the time, so its something with the drivers. running open al software only limits the audiodg to some point, but when running (Teamspeak) with Direct Sound, and (Counter StrikeSource) with Open Al /Alchemy) the Audiodg flips and starting to use 50% sometimes, and it hapends sometimes when i dont use teamspeak, so its Driver problem.
I phoned Creative and they told me on the support that they have no idea and telling the same story = Reainstall drivers etc..

Appledevicemobileservice.exe 50% CPU

Similar Messages

Maybe you are looking for