AppleFileServer crashes on MacBook Pro after G4 PowerBook connects

My wife successfully connects as registered user to my MacBook Pro (MBP) from her PowerBook G4 (PB). However, when she tries to open the share, the MacBook Pro immediately reports crash of "AppleFileServer" and writes a lengthy crash log.
In doing the reverse, having the MBP connect to the PB, then everything is as solid as usual. Have tried deleting plist files listed in crash report and have run DiskWarrior, permissions checks and the usual chants and incantations on both machines. Anyone with some magic dust or bits o' wisdom? I would be most grateful.
Both machines are running Mac OS X 10.4.11 and had been updated with combo updaters that were downloaded and run from the local drives.

Hi Gary,
Since you seem to have done/tried all the right stuff to fix the problem... I suspect some OS component on your Wife's book is a bit errant, I'd do an Archive & Install on her book, and of course do a Permission fix afterwards, and after any updates.
As a side note, these are the same symptoms seen while trying to connect OS8/9 with OS10.4.8+!

Similar Messages

  • Flash continually crashes on Macbook Pro after troubleshooting

    Flash is up to date (v. 16) and FF is v.35
    Even after unchecking Accelerate - and trying in Safe Mode, flash still crashes each time a page loads with a video or ad that uses flash.
    I am on an older v of OS X 10.8.5
    Here are most recent reports:
    bp-9ece670e-f1f5-47e5-9778-ead242150123 1/23/15 8:56 AM
    bp-af1bb8dc-907b-4f58-9d8b-8f8d72150123 1/23/15 8:55 AM
    bp-6abc13e7-0b44-4dbc-9975-eee432150123 1/23/15 8:50 AM
    bp-793ecdca-d17d-4e16-8783-f24822150123 1/23/15 8:42 AM
    bp-ebee767f-31fb-4cd4-a424-6f5fb2150123 1/23/15 8:40 AM
    bp-32c9ea41-56aa-4b56-991e-3dd072150123 1/23/15 8:37 AM
    bp-46d89e03-46c2-4d05-b80f-24e902150123 1/23/15 8:35 AM
    bp-867552f1-54d2-411e-9348-ec23c2150123 1/22/15 9:37 PM

    Is your flash: Veriosn 16.0.0.287?
    *https://www.adobe.com/support/flashplayer/downloads.html#fp15
    [[Troubleshoot issues with plugins like Flash or Java to fix common Firefox problems]]

  • Error message " The serial number you entered is valid, but a qualifying product annoy be found on this computer" appears. Unable to reinstall CS5.5 on my macbook pro after Hard disk crashed & was replaced.

    Error msg " The serial no you entered is valid,but a qualifying product cannot be found on this computer" appears. Can't reinstall CS5.5 onto Macbook pro after Hard disc crashed & was changed.

    It is not clear if you understand what that message is indicating.  It is telling you that you need to identify the older version of whatever CS5.5 upgrade you are installing to prove that you qualify for the upgrade.  This could be CS5, CS4, etc.
    Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
    http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

  • I can't login (always crashed) in my MacBook pro after updated to lion.  How can I do?

    I can't login (always crashed) in my MacBook pro after updated to lion.  How can I do?

    already finished to reinstall. It's a little bit better now.  But still not very stable, sometime crash in login screen, sometime crash when I was browsing.  Do anybody can solve it?

  • HT1420 I recently upgraded to a macbook pro after my old pc laptop crashed, is there a way to ensure that I can get all the songs off my iPhone when I sync?

    I recently upgraded to a macbook pro after my old pc laptop crashed, is there a way to ensure that I can get all the songs off my iPhone when I sync?

    There's some third party applications available. The following article is pretty old (2008) so it would be best to reality-check the capabilities and availability of the various listed items prior to opting for a particular product:
    http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/P2

  • Outlook 2011 slow, clunky and keeps crashing with macbook pro os 10.8.4 - any hints??  ta :)

    Outlook 2011 slow, clunky and keeps crashing with macbook pro os x 10.8.4 - any hints??  ta

    You might look in your User Library for Outlook .plist(s). They probably start with com.microsoft.
    Quit Outlook.
    Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences.  Move the .plist(s) to your desktop.
    Open the application and test. If it works okay, delete the plist(s) from the desktop.
    If the application is the same, return the .plist(s) to where you got them from, overwriting the newer ones.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

  • Flash player crashing my macbook pro

    I have a late 2007 mbp 3,1.
    Playing flash video *always* crashes my macbook pro, not immediately but after a few flash player clips. It does not crash the browser but the whole system, and I get a gray screen telling me in different languages I need to hold down the power button to turn off and restart my mac. I have spent hours trying to track down why this happened but to no avail.
    The *only workaround* I know is to use the flash player marked flashplayer10r45_2. I have tried all other versions and even excitedly all beta versions, but this problem remains unresolved. And now Firefox 4 won't even accept this version anymore.
    - Is anyone else experiencing this?
    -- Do you have a workaround? (one to force FF4 to use the old player or to prevent crashes with any player)

    I seem to have solve my issue and wrote it up here http://submanifolds.blogspot.com/2011/04/coolbook-on-macbook-pro-15-22-ghz.html
    Long  story short: I use coolbook, and my settings worked for all programs  under heavy loads, but not for flash content, I think that switching cpu  frequencies went a little too fast and the cpu voltage switching could  not keep up, but this is just a guess. I solved it by increasing the  voltages for the upper frequencies a bit and now my computer does not  crash anymore when playing flash. The flash plugin does crash  occasionally, but I consider this normal since I have never seen it  crashing on its own without taking down the whole system with it.
    I hope this helps (anybody)

  • MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

    MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
    This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
    After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
    Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
    1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
    2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
    sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
    This will allow you to simply type “airport” in the terminal window to execute the command.
    Type airport –s
    This will display all the networks in your area and what channel they are broadcasting on.
    3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
    The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
    4.) Boot your Mac into safe mode by holding down the shift key while booting.
    5.) Open System Preferences and Click on Network.
    6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
    7.) Create a new location by clicking the + and give it a new name.
    8.) Delete the old location by clicking on the old locations name and click the – to remove.
    9.) Reboot
    10.) Open System Preference and click on Network.
    11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
    12.) Drag Airport to the top of the list of devices then click Ok.
    Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
    13.) Click on Advanced under Network.
    14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
    15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
    16.) Click on the drop down for Configure IPv6 and change it to Off.
    17.) Next click on the DNS tab at the top.
    18.) Click the + to add a DNS Record.
    To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
    Then Type cat /etc/resolv.conf
    (There is a space between cat and /. Without it you’ll get no such file or directory.)
    This should return two addresses. Your ISP’s DNS Servers.
    19.) Add both records to the DNS and click Ok.
    20.) Click Ok then under Network Click Ok.
    21.) Reboot router then Mac
    22.) Fixed my connection issue
    The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
    I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
    Let me know if this helps or if you have any questions.
    Best of luck.
    Message was edited by: erockdabass
    Message was edited by: erockdabass

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • Can i return my macbook pro after 5 months

    can i return my macbook pro after 5 months

    If you bought it direct from Apple, you have 14 days to return it for a full refund or toward the purchase of a different model.
    After that time, if it is broken it can be repaired. If it does not suit your needs and cannot be upgraded to suit your needs, you recourse is to convert it to CASH by selling it, and apply the cash toward a computer that better suits your needs.

  • HT3964 my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video.

    my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video. 
    Any Suggestions?

    Restart the computer.

  • Safari 5.0.6 repeatedly crashes.  MacBook Pro 10.5.8  I've emptied cache and reset to no avail.  I've tried solutions found in other threads.  Help, please.

    Safari 5.0.6 repeatedly crashes.  MacBook Pro 10.5.8  I've emptied cache and reset to no avail.  I've tried solutions found in other threads but the more advanced don't seem to apply to me. Help, please.

    Not sure what other tests they could run for me. I've pretty much run all the tests I can using Drive Genius and Tech Tool Pro 5. Is there anything they use that I don't know about??

  • I upgraded my iTunes to 10.7 on my MacBook Pro - after that iTunes doesn't recognize my iPhone 4S 6.0.1 (10A523) in the iTunes sidebar. Solutions?

    I upgraded my iTunes to 10.7 on my MacBook Pro - after that iTunes doesn't recognize my iPhone 4S 6.0.1 (10A523) in the iTunes sidebar. Solutions?
    (Both upgrades to the phone and lap-top were done based on Apples suggestion, so I find it strange it doesn't work automatically, which should be a basic reason for choosing Apples costly products!)

    Try rebooting your computer.
    You might also try downloading and installing iTunes 11 which came out today.

  • Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

    Just bought a used MacBook pro after my previous died. I want to migrate my applications, data, etc from a time machine backup of the old computer to the new. Will this affect, or overwrite the Apps., data, etc existing on the new machine?

    No. Only those Apps that are not installed on the new will migrate over.

  • Hard drive crashed on macbook pro. now i want to recover all my photos on my iPhone (iPhone, favorites, stream, etc..) w/ out loosing. do i simply sync my iPhone. in addition, i lost all of my music was lost when hard drive crashed (time machine fail

    Hard drive crashed on macbook pro. now i want to recover all my photos on my iPhone (iPhone photos, favorites, stream, etc..) w/ out loosing. do i simply sync my iPhone? paranoid i will wipe iPhone photos when synching to new hard drive image and new iTunes image.
    In addition, i lost all of my music when hard drive crashed (time machine backup was corrupted also), is there anyway to recover iTunes music. Music was a combination of purchased, CD's burned, diverse music library, etc.....
    thank you,
    J

    Contact Apple Support:
    http://www.apple.com/support/contact/
    Apple - How to Contact Us:
    http://www.apple.com/contact/
    Be sure to refer to the repair ticket number.
    Sounds like a terrible mixup.
    Good luck & happy computing!

  • My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad

    My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.

    Same issue here too.  I will try reinstalling the firmware update.  This has happend to me twice.  The only way to correct the issue was to reboot.
    Thanks!

Maybe you are looking for

  • ITunes File Sharing under Device/Apps does not add content to my iPhone. Why not?

    I have attempted to get iTunes File Sharing: 1.  Select your device (in my case an iPhone 4). 2. Click on the Apps tab. 3. Select an application that allows for File Sharing and either drag a document or file into the documents area or use the Add bu

  • Problem with pdf links

    I use Microsoft Word 2010 with Windows 7 and IE8. Yesterday I updated my Adobe Reader to 10.1.5. I have numerous Word documents that have hyperlinks to pdf documents in them. Now when I use Word to convert these Word documents to pdf, the links in th

  • Oracle Performance Issues

    Greetings listers, I've some performance metrics reported as critical on my system. Can you help me understand how to fix these issues? I've the performance tuning guide , which am going through. would like to know the experts comments here about the

  • Urgent  Lockbox Help!!

    Hello, Need an urgent help in Lokcbox!!  <b>Full points will be rewarded</b>,,,, The lockbox file will have the company code, invoice no, document no...my requirement is to use an user-exit to look up for the correct company code based on the documen

  • How to use 2 primary key in 1 table

    Hi, When i creating the table,in this the following are the columns Name,Street,City,Pin in this they give some rules the column Name & City as Primary Key. But when type the query it shows the error table contains one primary key, how i do this? Tel