Applejack breaking Mail - refused to allow a connection on port 25

Hi folks
ran applejack in auto mode only to have it kill Mail... can no longer send mail... get the following message...
"This message could not be delivered and will remain in your Outbox until it can be delivered.
The server "mail.*.com.au" refused to allow a connection on port 25."
I got this once before and thought it was only with the UB version of Applejack so downgraded to the previous version but did it again... worked out last time how to fix it but cnanot remember what I did...
cheers Trevor

Hello Trevor.
Although this occurs after running AppleJack, it may be a coincidence only but the following was copied from AppleJack's website.
AppleJack is a user friendly troubleshooting assistant for Mac OS X.
And IMO, troubleshooting means just that - to be used when you are experiencing a problem.
How often do you run AppleJack? If running AppleJack in auto mode causes a problem when you aren't experiencing any problems, I'd seriously consider not running it in auto mode.
Check this link for recommended maintenance for OS X focusing on the Maintenance Myths section.
http://www.thexlab.com/faqs/maintainingmacosx.html

Similar Messages

Mail not receiving - failing to connect on Port 0 (should be using 110 ??)

Hi Apple,
Would you please help?
Mac Mail has ceased receiving email on my machine.
The last time Mail on my iMac received email was Wednesday, Nov 7, 2007.
My home setup has a DSL modem feeding a firewall (Astaro Version 6), which feeds a hub.
The hub feeds two boxes. One is my iMac running OS X 10.4.10 (Intel) running Mail (Version 2.1.1 (752.3)). The other is a home-brew Windows XP box.
For over a year, until Wednesday, I got all my email through Mail on the iMac.
Since Wednesday, nothing - no mail.
I've done a bit of troubleshooting; here's what I've found out.
When i run Mail -> Preferences -> Accounts -> Advanced it tells me I'm using Port 110.
When I run Mail -> Window -:> Mail Connection Doctor it tells me "Connection and login to server succeeded" for both my incoming and outgoing email servers.
But when I run Macintosh HD -> Applications -> Utilities -> Console, and then go back to Mail and click on "Get Mail", then go back to Console to see what happened, a new error message shows up telling me that it tried to use Port 0 (rather than 110) and failed. At the same time, no email shows up in the Mail Inbox. None since Wednesday.
And yes, I've tried restarting the iMac. No joy.
(Port 0? Why port 0? Why not Port 110??). Anyway ...
So in desperation, i went over to the Windows XP box (the one hanging off the same hub, remember?).
On the Windows XP box I get all my email, just fine.
So the iMac Mail problem is occurring somewhere this side of the hub, even though the Mail software claims to be set up correctly.
Apple, your Support web page directed me to this Forum.
Please help!
P.S. Here's the full error message from Console:
2007-11-10 09:56:57.201 Mail[657] -[POP3Connection fetchMessages:] failed: NSError "The connection to the server "incoming.verizon.net" on port 0 timed out." Domain=NSPOSIXErrorDomain Code=60 UserInfo={
NSLocalizedDescription = "The connection to the server \"incoming.verizon.net\" on port 0 timed out.";
"_MFHelpAnchor" = "string:isp set up network send problem connection";
}

Hi David and Shari2345,
I spoke with Apple Support at length today, and they solved the problem.
David, I hadn't realized that AppleCare also applied to software - I'd thought it was for hardware only.
The answer to the problem, in my case, was that I had been sent one (or several) files with very large attachments, and their presence in the input queue caused a problem for Mail. Once those emails were gone, Mail started working again just fine.
Specifically, the Apple tech, today, asked me if I had any form of web access to my email account.
I do, so I used that to look at the incoming email queue.
On the day that Mail had stopped working (back on the 7th), someone had sent me one email with an 8-Meg attachment and one with a 2-meg attachment. Someone else had also sent one with a half-meg attachment. I didn't recognize the senders of these emails, so i deleted all three emails from the queue (still using the web email interface).
That fixed the problem. Bingo - the log jam was unstuck, and Mail began to receive all my outstanding email.
It's working fine, now.
Shari2345, give the same process a try, if you also have web email access.
Thanks for your help, David. It felt pretty lonesome there, before you replied!
Shari2345, I hope this helps.
And thank you, very much, Apple Support.

Help: Mail server refuses connection to port 143

Hi,
i am having this problem with accessing mail from my mac. It is a recurring problem everytime when i use Mail to access my .mac account.
This is what in shows- "There may be a problem with the mail server or network. Check the settings for account "[email protected]" or try again.
The server error encountered was: The server "mail.mac.com" refused to allow a connection on port 143."
I m very puzzled by this, it is a problem that happens on an 'on-off' basis, so sometimes it is ok and sometime it cannot access the server.
Please advice on this issue.
P.S i can access mail via Safari online.
cheers
2Ghz Macbook 'White' Mac OS X (10.4.6)

I'm not having the same problem.
It occurs every time you use the Mail.app to access your .Mac account and if so, how long have you had the account?
The default incoming mail server port for IMAP type accounts is 143 and since a .Mac type account is really an IMAP type account, are you accessing any other IMAP type accounts with the Mail.app?
How are you connected to the internet - via an Ethernet connection to a Cable or DSL modem or thru a wired or wireless router connected to same?

Server error, cannot connect to port 110

Hello Support,
I'm trying to set up a mail account but can't connect to port 110. The mail account works on my old powerbook. I've tried changing the settings to 111, 125 etc. No luck.
What am I doing wrong???
Please help...

I'd call your ISP and go through your settings with them. It's likely that something in your setup is incorrect, or they changed their server to require new settings recently.
Mulder

Server refused to allow connection on port 993..why?

I've never used Mail before but tonight I've been trying to get it to work to no avail. I used a site from my university telling how to set it up so I can get my university email through Mac OSX Mail..it's a bit dated but I figure the info is mostly the same: http://www.cs.unm.edu/computerfacilities_and_support/email/mac_os_xmail/
Anyway it says to click the USE SSL box and port 993. Then when I try to get the mail it says the mail.unm.edu has refused connection to port 993.
What do I do now? Thanks!!

Oh i see. Okay please try signing out from the safari yahoo. Then go to safari and clear the history. Double tap on your device to also clear the mail app. Then go back to General settings, then Mail, Contacts, Calendar settings, try to add the yahoo account again. Put in your email and password, hit done, and then tell me what happens after that. Do not proceed please until you tell me what you see. Thanks

Mail refusing to connect

Since yesterday my Mail refused to connect to my Exchange 2007 account.
It all worked fine until then.
I also have Outlook on Mac, and it refuses to connect.
I didn't change any settings since then and the firewall is off.
On the same machine I also have Windows in Bootcamp, and Outlook in Windows.
That one connects.
Does anyone have a clue about what's happening here?

Can anybody help? The account seems fine.
I can add it through IMAP, but there's something about Exchange 2007 that is not working.
Any tips about troubleshooting would be appreciated.

Mail refuses to connect to my Exchange Server

I have an Exchange Server which also functions as an IMAP server. I cannot get mail to connect this server using the IMAP protocol. Thunderbird on the same machine connects to this exchange server just fine using IMAP. And Mail does not have problem connecting to other IMAP servers. Any idea on where I can look to troubleshoot?

I'm in the same boat and have been banging my head against this all day. Have you found an answer yet?

Error while connecting to Microsoft Exchange server using javamail: "com.sun.mail.util.MailConnectException: Couldn't connect to host, port: host name , 993; timeout -1"

I am trying to read mails from my outlook microsoft exchange server. Following is the code:
public void readEmailsFromOutlook(/*String host, String username, String password*/ ) throws MessagingException, IOException {
      String host = "hostname";
      String username = "domain\\username";
      String password = "password"
      // Create empty properties
      Properties props = System.getProperties();
      props.setProperty("mail.smtp.auth","true");
      props.setProperty("mail.store.protocol","imaps");
      props.setProperty("mail.imap.auth.plain.disable","true");
      props.setProperty("mail.imap.host",host);
      props.setProperty("mail.imap.port","993");
      props.setProperty("mail.imap.user",username);
      props.setProperty("mail.imap.pwd",password);
      props.setProperty("mail.imap.debug","true");
      props.setProperty("mail.imap.ssl.protocols","SSL");
      props.setProperty("mail.imap.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
      props.setProperty("mail.imap.socketFactory.fallback", "false");
      props.setProperty("mail.imap.socketFactory.port", "993");
      // Get session
                 Session session = Session.getInstance(props, new ExchangeAuthenticator(username, password));
      session.setDebug(true);
      // Get the store
      Store store = session.getStore("imaps");
      //Store store = session.getStore();
      store.connect(host, username, password);
      // Get folder
      Folder folder = store.getFolder("INBOX");
      folder.open(Folder.READ_ONLY);
      BufferedReader reader = new BufferedReader(new InputStreamReader(
          System.in));
      // Get directory
      Message message[] = folder.getMessages();
      for (int i = 0, n = message.length; i < n; i++) {
        System.out.println(i + ": " + message[i].getFrom()[0] + "\t"
            + message[i].getSubject());
        System.out.println("Read message? [YES to read/QUIT to end]");
        String line = reader.readLine();
        if ("YES".equalsIgnoreCase(line)) {
          System.out.println(message[i].getContent());
        } else if ("QUIT".equalsIgnoreCase(line)) {
          break;
      // Close connection
      folder.close(false);
      store.close();
But it threw the following error:
DEBUG: setDebug: JavaMail version 1.5.1
DEBUG: getProvider() returning javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Oracle]
DEBUG IMAPS: mail.imap.fetchsize: 16384
DEBUG IMAPS: mail.imap.ignorebodystructuresize: false
DEBUG IMAPS: mail.imap.statuscachetimeout: 1000
DEBUG IMAPS: mail.imap.appendbuffersize: -1
DEBUG IMAPS: mail.imap.minidletime: 10
DEBUG IMAPS: trying to connect to host <hostname>,port 993, isSSL true
com.sun.mail.util.MailConnectException: Couldn't connect to host, port: 10.75.250.60, 993; timeout -1;
nested exception is:
java.net.ConnectException: Connection refused: connect
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:693)
at javax.mail.Service.connect(Service.java:345)
at javax.mail.Service.connect(Service.java:226)
at com.capgemini.utilities.Utilities.readEmailsFromOutlook(Utilities.java:1261)
Whats wrong with my code?
Please help!!!!

You're using the "imaps" protocol, but you've set properties for the "imap" protocol. Change all the property names from mail.imap.* to mail.imaps.*.
Also, get rid of all the socket factory properties.
If you still can't connect, see these connection debugging tips.
Most likely you're using the wrong host name or port number. In almost all cases, it's better to just let JavaMail choose the correct port number.

Mail refuses to get new mail.

Mail refuses to get new mail. (Imac 10.9.5, Mail 7.3. ) Connection doc shows wheels to all my accounts spinning (IMap and POP). Activity cited Mail was trying to connect to Icloud. Evidently stuck there. This is just one problem in a succession of many with the Mail program ever since I upgraded to 10.9.5, but it is the worst so far. Restarting doesn't seem to fix it. Any suggestions?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

BUG: Mail (GMAIL IMAP) no longer connects over ethernet, only wireless

I too was puzzled last night when I couldn't get my gmail account to go online. I did a lot of reading, and tried various things (to no avail), but ultimately decided it was just a configuration error, or combination of other programs running...or maybe even (as read in other posts) Google's servers. I found the server problem unlikely though, since I could also log in via the web interface.
Mysteriously, opening Mail on a separate MBP over either ethernet or wireless was 100% normal...as was the imap connection on my iPad via 3G or wireless...so what was causing my brand new MBAir to choke? Sleep on it, I said to myself.
Well here I am on day 2 of Mail refusing to connect. Connection doctor always shows 'green' next to connection status (Mail was able to connect to the internet), but red for both imap and smtp servers, with messages reading "Mail could not connect to this IMAP/SMTP server. Check your network connection and that you entered the correct information in Account preferences. Also verify the server supports SSL. If it does not, deselect the 'Use SSL' checkbox in the Advanced tab of Account preferences."
I've eliminated the server issue, because my MBP still opened Mail just fine while connected to my network here at home.
Then, just for fun, I decided to unplug my ethernet (which is attached via Apple's own USB Ethernet adapter), and turn on my wireless. Almost instantly, Mail popped to life on my MBAir, and started syncing with gmail/IMAP.
In the two months I have owned this MBAir, getting Mail to work over ethernet had never been a problem. My issues seemed to parallel the recent influx of problems reported with gmail & IMAP.
I still cannot get Mail to access gmail over the USB Ethernet Adapter. What gives, Apple? Anyone else experiencing these symptoms on these new MBAirs?
Model Name: MacBook Air
Boot ROM Version: MBA31.0061.B01
SMC Version (system): 1.66f54

Turns out I was a victim of my own [tight] security. I had a SOCKS proxy enabled on my Ethernet for when I take this laptop on the road...I used it to connect securely to my server back home. Obviously at home my SOCKS proxy was not connecting from within my private network. As soon as I removed the SOCKS proxy, voilá! GMAIL IMAP works perfectly over the USB Ethernet adapter once again.
I hope this serves as a reminder to thoroughly check your network settings before driving yourself mad!
Cheers!

Bypassing TCP port 25 restriction (i.e. worst ISP EVER; Mail is not allowed

Hi
The private company that runs my DOES NOT ALLOW Smtp connections on its "hi speed internet connection".
Meaning that Mail cannot function and I have to check via webmail.
I'm serious.
Their FAQ states:
Can I use email clients such as Microsoft Outlook or Outlook Express to send and receive emails?
No, you will only be able to use web browser based email such as Hotmail or Gmail; this is due to limitations (on TCP port 25) which have been implemented to protect you against other computer users sending unsolicited bulk emails (SPAM) via your computer.
Does anyone know a way to get around this as I NEED the functionality of Mail.....
Also,
Are all British ISPs this ridiculous?
Dieing to find a solution to this....... Many Many Many Many Thanks
PS. I already paid extra ($250USD) to enable 'super' internet which doesnt throttle VOIP, STREAMING, gaming, P2P etc.
Luke

Beginning January 1, 2006 Port 587 has been standardized as the port to use for authenticated SMTP servers although most will still work with Port 25 as well. More and more ISPs are blocking port 25 as various jurisdictions are holding them responsible for spam and/or viruses originating on their network. With unauthenticated SMTP anyone can send using that server whether they have an account or not. So the ISPs block that port with the sole exception of their own SMTP server so they can scan the messages for spam and viruses. With an authenticated SMTP server where a valid account id and password are required to send messages the provider of the server assumes the responsibility for scanning all traffic through their server thus relieving the ISP of the liability.
Whether you think this is a big brother step or not, with estimates that spam on the internet is running as high as 70% of all email traffic, if it weren't for restrictions like this email would rapidly become an unusable tool. The only annoying thing I have found about this is how few ISP Tech Support people know about this. To often their solution is "you can only use another email provider through their webmail interface."

Is there a setting for mail that will allow me to delete emails on the Iphone without being deleted from the mail server? I have Yahoo mail.

Is there a setting in Iphone mail that will allow me delete emails on the Iphone without deleting the emil from the mail server? I want to be able to download the email to other devices. I am using Yahoo mail.

I did not mean actually editing in the PDF, but just copying the text out of the PDF and pasting into indd... or Word.. .or anything. Regardless, just wondering if there was a way to avoid those line breaks.

Mail changes not allowed

Why nokia does not allow , mails to be edited?This is for office exchange server mails.(not on gmail,yahoo etc)
I am unable to edit the conntets of original mail ,when i forward or try to reply to the mails.
e72 doesnt allow to copy ,cut ,paste or any modify any contents of the original mail to which i try to repsond.strange!

What software version are you using in the phone?
You can check this by typing in *#0000# in your phone
Do you know what version of Microsoft Exchange server you are connecting to?
(Microsoft Exchange 2003, 2007 or 2010)
I would suggest that you ask the server admin to create a new test account on the server, and then configure this on your phone. Alternatively put a colleagues e-mail account credentials in your phone and test how the phone acts.
If it works as it should with a another account it could be problem on your account related to server policies that only the Exchange server admin can look into

The ol' "mail.app holds 3 persistent connection per account" problem.

I've seen posts from a few years ago regarding this problem. My mail host only allows a certain number of persistent connection... ok, that's my bad for cheaping out on a host, I can dig that.
But there has to be an automated way to check, and disconnect for these types of situations. It doesn't seem right to have to change isp's when mail.app could have a little checkbox that says:
"don't persist IMAP connection because of ghetto ISP".
The fraction of a second it would take to reconnect, check and retrieve headers, then disconnect is something I can live with.
Does anyone have a workaround or know of a client that allows non-persistant imap connections?
Maybe an IMAP proxy daemon?
Any help will be rewarded by receiving the praise of all the other poor sods in the same boat. Your name will be rejoiced the world over, you will be a GOD!
Thanks

If Mail complains that it timed out on port 0, that means there is something wrong with your network and/or account settings.
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
Also, try using a different method to connect to Internet, if possible, or connecting the computer to Internet as directly as possible, i.e. bypassing any routers that might be present, using an ethernet cable instead of wireless, etc., and see whether that makes a difference.
As to the logs, Mail doesn’t make it easy to get them. Open /Applications/Utilities/Console and do either File > Open Console Log, or File > Open System Log, or both, so that Console displays the contents of both system.log and console.log.
Apparently, you can tell Mail to provide detailed log information as described in the following article (I haven’t tried it myself):
Enable detailed Mail.app logging options
Also, Mail comes with a Turn On Logging AppleScript that I haven’t tried either, but that was discussed in the following thread:
MAIL LOG???

Applejack breaking Mail - refused to allow a connection on port 25

Similar Messages

Maybe you are looking for