Applemobilebackup.exe error during backup
I have been having some problems for over a month now backup up my iphone. Flat out can not backup. Gets to say 90-95% and then fails giving me the applemobilebackup.exe error to report to windows. I have tried reinstalling itunes, deleting mobile files off pc, removing anything I can find that has to do with the iphone or apple, all the way to a complete reformat of the pc. New itunes install and still getting the error. Running itunes 8.0.2.20 and iphone 2.2.1 on windows xp pro. Any reason why after a complete format I still get this error. No virus scan has been installed. Could it be the phone is done?
Hi, I had a similar problem which I traced to a particular file on the Iphone which I had put there using AirShare. When I deleted the file and started a resync it worked fine.
N
Similar Messages
-
HI all,
Our database backup was running ok for the passed 3 months after the SAP system was installed. Recently, I keep getting BR278E error during backup. Below are the error message:
BR0202I Saving init_ora
BR0203I to /dev/rmt/0mn ...
BR0278E Command output of 'LANG=C cd /oracle/PRD/102_64/dbs && /usr/sap/PRD/SYS/
exe/run/brtools -f printarg initPRD.ora spfilePRD.ora | LANG=C cpio -ovB > /dev/
rmt/0mn':
initPRD.ora
spfilePRD.ora
^GEnd of medium on "output".
To continue, type device/file name when ready.
The SAP system is on Solaris/Oracle running ECC6.0. LTO-4 tape drive is used for the backup. Tape_size in initSID.sap is set to 720000M. Current database size is 128Gb.
What is the reason for the backup failure?
Rdgs,
LimHi,
This is my initSID.sap
@(#) $Id: //bas/640_REL/src/ccm/rsbr/initSUN.sap#4 $ SAP
backup mode [all | all_data | full | incr | sap_dir | ora_dir
| <tablespace_name> | <file_id> | <file_id1>-<file_id2>
| <generic_path> | (<object_list>)]
default: all
backup_mode = all
restore mode [all | all_data | full | incr | incr_only | incr_full
| <tablespace_name> | <file_id> | <file_id1>-<file_id2>
| <generic_path> | (<object_list>)]
redirection with '=' is not supported here - use option '-m' instead
default: all
restore_mode = all
backup type [offline | offline_force | offline_standby | offline_split
| offline_mirror | offline_stop | online | online_cons | online_split
| online_mirror
default: offline
backup_type = online
backup device type
[tape | tape_auto | tape_box | pipe | pipe_auto | pipe_box | disk
| disk_copy | disk_standby | stage | stage_copy | stage_standby
| util_file | util_file_online | rman_util | rman_disk | rman_stage
| rman_prep]
default: tape
backup_dev_type = tape
backup root directory [<path_name> | (<path_name_list>)]
default: $SAPDATA_HOME/sapbackup
backup_root_dir = /oracle/PRD/sapbackup
stage root directory [<path_name> | (<path_name_list>)]
default: value of the backup_root_dir parameter
stage_root_dir = /oracle/PRD/sapbackup
compression flag [yes | no | hardware | only]
default: no
compress = hardware
compress command
first $-character is replaced by the source file name
second $-character is replaced by the target file name
<target_file_name> = <source_file_name>.Z
for compress command the -c option must be set
recommended setting for brbackup -k only run:
"compress -b 12 -c $ > $"
no default
compress_cmd = "compress -b 12 -c $ > $"
uncompress command
first $-character is replaced by the source file name
second $-character is replaced by the target file name
<source_file_name> = <target_file_name>.Z
for uncompress command the -c option must be set
no default
uncompress_cmd = "uncompress -c $ > $"
directory for compression [<path_name> | (<path_name_list>)]
default: value of the backup_root_dir parameter
compress_dir = /oracle/PRD/sapreorg
brarchive function [save | second_copy | double_save | save_delete
| second_copy_delete | double_save_delete | copy_save
| copy_delete_save | delete_saved | delete_copied]
default: save
archive_function = copy_delete_save
directory for archive log copies to disk
default: first value of the backup_root_dir parameter
archive_copy_dir = /oracle/PRD/sapbackup
directory for archive log copies to stage
default: first value of the stage_root_dir parameter
archive_stage_dir = /oracle/PRD/sapbackup
new sapdata home directory for disk_copy | disk_standby
no default
new_db_home = /oracle/C11
stage sapdata home directory for stage_copy | stage_standby
default: value of the new_db_home parameter
stage_db_home = /oracle/C11
original sapdata home directory for split mirror disk backup
no default
orig_db_home = /oracle/C11
remote host name
no default
remote_host = <host_name>
remote user name
default: current operating system user
remote_user = <user_name>
tape copy command [cpio | cpio_gnu | dd | dd_gnu | rman | rman_dd]
default: cpio
tape_copy_cmd = dd
disk copy command [copy | dd | dd_gnu | rman]
default: copy
disk_copy_cmd = copy
stage copy command [rcp | ftp]
default: rcp
stage_copy_cmd = rcp
flags for cpio output command
default: -ovB
cpio_flags = -ovB
flags for cpio input command
default: -iuvB
cpio_in_flags = -iuvB
flags for cpio command for copy of directories to disk
default: -pdcu
cpio_disk_flags = -pdcu
flags for dd output command
default: "obs=16k"
recommended setting:
Unix: "obs=nk bs=nk", example: "obs=64k bs=64k"
NT: "bs=nk", example: "bs=64k"
dd_flags = "obs=64k bs=64k"
flags for dd input command
default: "ibs=16k"
recommended setting:
Unix: "ibs=nk bs=nk", example: "ibs=64k bs=64k"
NT: "bs=nk", example: "bs=64k"
dd_in_flags = "ibs=64k bs=64k"
copy_in_cmd = "dd ibs=64k obs=8k if=$"
rewind command
rewind = "mt -f $ rewind"
rewind and set offline command
rewind_offline = "mt -f $ offline"
tape positioning command
tape_pos_cmd = "mt -f $ fsf $"
recommended values for tape devices with hardware compression:
tape_size = 720000M
address of backup device without rewind
tape_address = /dev/rmt/0mn
address of backup device with rewind
tape_address_rew = /dev/rmt/0m
volumes for brarchive
volume_archive = (PRDA09, PRDA10)
volumes for brbackup
volume_backup = (PRDB09, PRDB10)
expiration period for backup volumes in days
expir_period = 5
recommended usages of backup volumes
tape_use_count = 260
Edited by: limws1 on Aug 27, 2011 4:44 AM -
Problems since 2.2.1 (applemobilebackup.exe error, long sync time)
After installing 2.2.1, I am experiencing the following and wondering if anyone on this forum has a solution to the following two issues. Thanks in advance.
While syncing to my pc (it's a toshiba laptop running xp sp3), right before completing, there has been an applemobilebackup.exe error appearing that I click ok to and then it finishes sync'ing. I'v searched the net and it seems like I'm the only one experiencing this??
It seems to keep taking longer and longer to sync. I remember the status bar running faster than I can keep an eye on it. After installing a few games, it's at a crawl these days. I uninstalled the Facebook app and still runs at a crawl. Anybody have any ideas how to enable faster sync times?Here is an article from the apple support website that might help out.
http://support.apple.com/kb/TS1401
http://support.apple.com/kb/TS1878 -
Hi, I'm baaaaaaack!
I have a new (replacement) Netware 6.5 SP8 server running Groupwise,
with 4 RAID'ed 450GB 10K SAS drives giving me about 1.2TB of space. In
keeping things arranged close to the way they were before I arrived, for
now at least, I have a "DATA_POOL" which holds "SYS2" volume. During
nightly backups, since the new server went in about 12 days ago, I'm
getting backups failing, and eventually the SYS2 volume dismounted last
weekend during the full backup.
I tried doing a poolrebuild even though poolverify showed no errors, per
Symantec & Novell documentation, and that didn't suffice. Had to do the
"purge" rebuild, and then was able to re-mount the volume. I wasn't
sure if the error was somehow related to the server migration, so I
tried the same full backup again and got the same nasty results.
Rebuilt again, and made some changes to the OFMCDM.CFG file as
recommended in some Symantec documentation, and the backups have been
succeeding.
However, the logs show lots of entries like the following, still, always
during the backups:
3-08-2011 9:43:15 pm: COMN-3.26-178
Severity = 5 Locus = 3 Class = 0
NSS-2.70-5009: Pool AIRP_COMM/DATA_POOL_SP had an error
(20012(beastTree.c[510])) at block 129200397(file block
-129200397)(ZID 1).
3-08-2011 9:43:15 pm: COMN-3.26-180
Severity = 5 Locus = 3 Class = 0
NSS-2.70-5008: Volume AIRP_COMM/SYS2_SV had an error
(20012(beastTree.c[510])) at block 129200397(file block
-129200397)(ZID 1).
It's not clear to me if this means it *has* to be a disk drive error.
New disks would seem to increase the likelihood of physical disk
failure, but it only happens during the Backup Exec 9.2 backups of this
volume, and never on the SYS volume during those same backups.
The Groupwise total database is about 100GB, and the total volume space
is about 800GB, if that matters. (This server is built to GROW.)
Suggestions? Does this clearly point to a hardware (disk) error even
though it only happens during backups, and the symptoms changed when I
made the OFM configuration changes?
The changes I made to OFMCDM.CFG were:
InitialCacheSize = 0x0000000000400000 (was 200000)
CacheSizeExpandThreshold = 0x30 (was 0x1e)
The old server didn't have any problems backing up, and everything was
brought over intact/identical in configuration, even though the above
changes did seem to help somewhat. I'm posting here because this seems
more of a "storage" (disk) issue than really a backup issue, despite the
failures occurring during backups.
Any suggestions, or clarification about the above cause & possible fixes?
Thanks.
-- DEThanks, but I don't know of any way to back up Groupwise without using
OFM; you just can't get the data if you do that because so many
important files are open. And I do agree that it's OFM if it is not a
hardware issue.
Your entries under "device" look like the defaults, which I started
with, and yet there are a bunch of references on the Symantec (Backup
Exec) site which suggest changing those. But I will want to compare
your entries with mine, higher in the file, to see if there is any
particular setting that is non-default and might address the issue.
I do have slots for a spare drive on this new server. Currently, the
cache is directed to the very same volume that is having issues,
although it worked fine that way in the past on the old server. But I
can easily get another drive if that will resolve this.
Thanks.
-- DE
[email protected] wrote:
> Besides other possibilities I would at first take the OFM
> out the game and run backups without it.
>
> In case that does the trick and you need to backup open file
> - as we did - I would try the following (here we run
> NW6.0-SP5 with BackupExec 9.1 and OFM from St. Bernard,
> which comes with BE):
>
> Place a single spare disk in the server with a seperate pool
> and volume and direct the open-file-cache to this device. In
> our case it is directed to TMP and the ofmcdm.cfg is the
> following:
>
> [General]
> BreakOnAssert = 0x1
> BreakOnException = 0x1
> MinServerMemoryPercent = 0x6
> StatusPrintLevel = 0x0700000000000000
> ThreadsPerQueue = 0x3
> QueuesPerPool = 0x1
> WriteInactivityPeriod = 0x2
> SyncTimeOut = 0x3c
> CacheLFS = 0x0
> CacheBlockSize = 0x4000
> GetHamSetStateTimeout = 0x3c
> LFSCachePoolName =
> BackupCachePoolName =
> BreakOnCluster = 0x0
> VerboseMessageLogging = 0x0
> SyncLFSVolumes = 0x0
> CacheToLFSVolumes = 0x0
> AutoMountVolumes = 0x0
> LogFileBufferSize = 0x10000
> LogFileNumBuffers = 0x4
> LogFileWriteFrequency = 0xf
> DebugDumpOnSyncFail = 0x0
> LFSCacheLocation =
> BackupCacheLocation =
>
> [Advanced]
> SmallEmergencyMemBlockSize = 0x400
> SmallEmergencyMemBlockCount = 0x32
> MediumEmergencyMemBlockSize = 0x2800
> MediumEmergencyMemBlockCount = 0xa
> LargeEmergencyMemBlockSize = 0x19000
> LargeEmergencyMemBlockCount = 0x2
>
> [Device SYS]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x29
>
> [Device BAK]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x29
>
> [Device TMP]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x79
>
> [Device GWX]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x29
>
> [Device IVM]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x29
>
> [Device ZFD]
> MinFreeSpace = 0x0000000000400000
> InitialCacheSize = 0x0000000000200000
> CacheSizeExpandThreshold = 0x1e
> CacheSizeFailThreshold = 0x5
> Status = 0x29
>
>
>
> I do not remember all the other tweaking we did with the
> BE-Support, but this finally did the trick and helped us to
> run the server without any problems.
>
> Sincerely
>
> Karl -
I have getting errors with the last 3 versions of PC Suite when trying to make a full backup.
It seems like it won't backup my calender.
It says my calender is in use.
I DO have data in the calender.
I have no 3rd party calender installed.
Doesn't PC Suite shut that down during backup?
I'm using Windows XP Pro SP2
Phone is a Nokia 6670.
Current PC Suite is v6.70.22
SnowmanDKI did try taking out the battery several times.
Don't know my firmware version (how can I find it?).
I'm trying to use the backup from PC Suite (not the phone).
I have found out that I can make the backup when I force all services to quit before doing it. -
AppleMobileBackup.exe error message - help!!
I synced my 3G as I normally do but got this message when the computer tried to do a back up: AppleMobileBackup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
I'm using Windows XP and I haven't installed any crazy programs onto my phone or computer. The back up process runs for about 10+ minutes and just when it is about to reach the end, this message pops up.
How do I fix this??I just got off the phone with Apple support and did the user account thing and the problem went away. The only problem now is everything including my entire library is on the other account. I use Iolo System Mechanic pro for my security software. I never had this problem till the 2.0.2 (5C1) download.
I believe the the new user fixes the issue due to the fact that none of the preexisting files are being used . So there must be a conflict or corrupt file some where in the original iTunes directory that is not removed and or replaced during a reinstall. I will try this http://support.apple.com/kb/HT1275 and see if that works.
I think it might be a corrupted back up and uninstalling apple mobile device support and removing any remaining files could solve the problem. -
Errors during backup of MSSQL 2005 using DB13
Hi,
I have an ECC 5.0 system, and when I try to perform any kind of backup of a MSSQL 2005 database using DB13 I get an error like this:
Modified: 2006-12-05 11:43:55.
Command: pc1.sap_backup_databases
@dblist="PC1,master,msdb",@r3db="PC1",@bdev="PC1
_v2",@unload=0,@jobname= "SAP CCMS Full DB Backup
of PC1,master,msdb [20061205114354]"
Descript: SAP CCMS JOB
*********** Task history information ***********
For run: 20061205 23:00:00
Status: 0 (failure) (see DB error log)
Message: 3013
Severity: 16
Duration: 0 hours, 0 minutes, 0 seconds
Last msg: Executed as user: NT AUTHORITYSYSTEM. DBCC execut
ion completed. If DBCC printed error messages, con
tact your system administrator. [SQLSTATE 01000] (
Message 2528) The user-specified MEDIANAME "ID05S
" does not match the MEDIANAME "ID29S" of the devi
ce "PC1_v2(D:BackupPC1_2.bak)". [SQLSTATE 42000]
(Error 4037) BACKUP DATABASE is terminating abno
rmally. [SQLSTATE 42000] (Error 3013). The step
failed.
The strange thing is that if I create a new backup device in MS SQL Server Management Studio, and assign a backup job to use this backup device, the backup is successfull... but only the first time I schedule the backup. Following backup attempts to same device fails with the error message above.
Any ideas, anyone?
Regards,
ThomasHi Kan,
So your suggestion is that I should run a backup with the format media option selected? I believe I have tried that, but I will nevertheless give it another go.
Will keep this thread open in the mean time.
Thomas -
Hello, can anyone point me to the right direction...I was trying to backup my database because I know that there is something wrong with my Oracle 10g Express and I need to reinstall it.
During the backup process this is whats happening:
Warning: Log archiving (ARCHIVELOG mode) is currently disabled. If
you restore the database from this backup, any transactions that take
place between this backup and the next backup will be lost. It is
recommended that you enable ARCHIVELOG mode before proceeding so
that all transactions can be recovered upon restore. See the section
'Enabling ARCHIVELOG Mode...' in the online help for instructions.
Backup with log archiving disabled will shut down and restart the
database. Are you sure [Y/N]? y
Backup in progress...
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Aug 1 12:23:15 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: XE (DBID=2509285891, not open)
RMAN> set echo on;
2> shutdown immediate;
3> startup mount;
4> configure controlfile autobackup format for device type disk clear;
5> configure retention policy to redundancy 2;
6> configure controlfile autobackup on;
7> sql "create pfile=''C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SPFILE2INIT.ORA'' from spfile";
8> backup as backupset device type disk database;
9> configure controlfile autobackup off;
10> alter database open;
11> delete noprompt obsolete;
12>
echo set on
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
connected to target database (not started)
Oracle instance started
database mounted
Total System Global Area 599785472 bytes
Fixed Size 1288820 bytes
Variable Size 171967884 bytes
Database Buffers 423624704 bytes
Redo Buffers 2904064 bytes
RMAN configuration parameters are successfully reset to default value
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
new RMAN configuration parameters are successfully stored
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
sql statement: create pfile=''C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SPFILE2INIT.ORA'' from spfile
Starting backup at 01-AUG-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=35 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/01/2007 12:23:45
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
Recovery Manager complete.
==================== ERROR =============================
Backup of the database failed.
RMAN Error - See log for details .
Log file is at C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\OXE_BACKUP_CURRENT.LOG.
==================== ERROR =============================
Press any key to continue . . .
and in my OXE_BACKUP_CURRENT.LOG:
Recovery Manager: Release 10.2.0.1.0 - Production on Wed Aug 1 12:29:11 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Windows XP Version V5.1 Service Pack 2
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1337M/2045M, Ph+PgF:2847M/3938M, VA:2003M/2047M
Starting with debugging turned off
connected to target database: XE (DBID=2509285891, not open)
RMAN> set echo on;
2> shutdown immediate;
3> startup mount;
4> configure controlfile autobackup format for device type disk clear;
5> configure retention policy to redundancy 2;
6> configure controlfile autobackup on;
7> sql "create pfile=''C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SPFILE2INIT.ORA'' from spfile";
8> backup as backupset device type disk database;
9> configure controlfile autobackup off;
10> alter database open;
11> delete noprompt obsolete;
12>
echo set on
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
connected to target database (not started)
Oracle instance started
database mounted
Total System Global Area 599785472 bytes
Fixed Size 1288820 bytes
Variable Size 171967884 bytes
Database Buffers 423624704 bytes
Redo Buffers 2904064 bytes
RMAN configuration parameters are successfully reset to default value
old RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
new RMAN configuration parameters are successfully stored
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
sql statement: create pfile=''C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DATABASE\SPFILE2INIT.ORA'' from spfile
Starting backup at 01-AUG-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=36 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 08/01/2007 12:29:39
RMAN-10035: exception raised in RPC:
ORA-19583: conversation terminated due to error
ORA-19602: cannot backup or copy active file in NOARCHIVELOG mode
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 651
RMAN-10031: RPC Error: ORA-19583 occurred during call to DBMS_BACKUP_RESTORE.BACKUPDATAFILE
Recovery Manager complete.
Message was edited by:
BawasiBawasi,
I was trying to backup my database because I know that there is something wrong with my Oracle 10g Express and I need to reinstall it.
You should make a backup before something went wrong... What's wrong with your database?
Regards, Marc -
Hi,
Our system on a daily basis creates a backup of Sql Server 2008 database. It is using "backup database {0} to disk='{1}'" command. It works for years now, but recently a problem occurred.
On our system side the following exception is thrown:
System.Data.SqlClient.SqlException (0x80131904): Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database. The backup/restore operation was still successful.
Processed 1442744 pages for database 'hist', file 'hist' on file 1.
Processed 4 pages for database 'hist', file 'hist_log' on file 1.
Sql Server log:
Backup,Unknown,BACKUP failed to complete the command BACKUP DATABASE hist. Check the backup application log for detailed messages.
Backup,Unknown,Error: 3041<c/> Severity: 16<c/> State: 1.
Backup,Unknown,Database backed up. Database: hist<c/> creation date(time): 2013/05/20(14:13:10)<c/> pages dumped: 1368896<c/> first LSN: 2054:172392:244<c/> last LSN: 2054:172493:1<c/> number of dump devices: 1<c/> device
information: (FILE=1<c/> TYPE=DISK: {'e:\backup\hist20131129.dmp'}). This is an informational message only. No user action is required
There are no other errors. The same problem occurred twice during last few weeks. DBCC CHECKDB is not returning any errors. Any idea where the problem may be?
Many thanks,
MartinHi Martin
your error says :
Could not insert a backup or restore history/detail record in the msdb database. This may indicate a problem with the msdb database.
The backup/restore operation was still successful.
Processed 1442744 pages for database 'hist', file 'hist' on file 1.
Processed 4 pages for database 'hist', file 'hist_log' on file 1.
1. The backup/restore operation was still successful.
----------> Seems your backup got completed but job failed , you can confirm checking backup history using below code
select b.database_name, b.type, bf.physical_device_name, b.backup_start_date, b.backup_finish_date
, b.server_name , b.machine_name ,b.[user_name]
from msdb..backupset b
left outer join msdb..backupmediafamily bf on bf.media_set_id = b.media_set_id
where b.type in('D') and b.database_name = 'msdb'
order by b.backup_finish_date desc
2. Could not insert a backup or restore history/detail record in the msdb database.
---> This cant be access issue as insertion happens internally, But space in msdb can be a issue. you can check same using below
Check database size and free space in SQL Server
Thanks Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/
Please click the Mark as answer button and vote as helpful
if this reply solves your problem -
Protection Agent failure error during backup to tape with DPM 2010.
DPM TechNet Forum,
We are experiencing an intermittent error when backing up to tape using DPM 2010 (with latest QFE roll-up applied).
"The operation failed because of a protection agent failure. (ID 998 Details: The device is not connected (0x8007048F))"
Any idea what could be causing this error?
Thanks in advance,
JoeHi,
You can try to reproduce the problem outside of DPM using some external utilities. If you have more than one drive in the library, run the test against both drives simultaneously to simulate multiple backup jobs running. If you get an error
before the tape fills you can use net helpmsg errorcode to see what the error was.
Download the DPMerasetape.zip file from the following link and extract to c:\temp folder.
https://onedrive.live.com/?cid=b03306b628ab886f&id=B03306B628AB886F%21524&sc=documents
The utilities are not that user friendly, but here are the basics.
Always Stop DPMLA Service prior to running MCT.EXE Commands.
NET STOP DPMLA
C:\> mct-x64.exe -p
Opening changer \\.\Changer0
********** Changer Parameters **********
Number of Transport Elements : 1
Number of Storage Elements : 50
Number of Cleaner Slots : 0
Number of of IE Elements : 0
Number of NumberDataTransferElements : 6
Number of Doors : 0
First Slot Number : 0
First Drive Number : 0
First Transport Number : 0
First IEPort number : 0
First Cleaner Slot Address : 0
Magazine Size : 0
Drive Clean Timeout : 600
Flags set for the changer :
CHANGER_BAR_CODE_SCANNER_INSTALLED
CHANGER_POSITION_TO_ELEMENT
CHANGER_STORAGE_DRIVE
CHANGER_STORAGE_SLOT
CHANGER_DRIVE_CLEANING_REQUIRED
CHANGER_VOLUME_IDENTIFICATION
CHANGER_VOLUME_SEARCH
CHANGER_SERIAL_NUMBER_VALID
Changer can move from Slot to :
Slot
Drive
Changer can move from Drive to :
Slot
Drive
Changer is Capable of positioning transport to Slot.
Changer is Capable of positioning transport to Drive.
C:\> mct-x64.exe -d
Opening changer \\.\Changer0
Product Data for Medium Changer device :
Vendor Id : STK
Product Id : L180
Revision : 030
SerialNumber : 3077520000
For MCT utility we have the -m [MOVE] command to move media around inside the library.
-m [ElemType-T] Transport# [ElemType-Source] S_lot#/D_rive# [ElemType-Destination] S_lot#/D_rive#
Get / view command syntax for –m (move) command for changer 0
C:\>mct-x64 0 -m
Opening changer \\.\Changer0
MoveMedium : mct -m t N s\d N s\d N [Where s/d means Slot or Drive and N is ZERO based].
Some Examples:
mct-x64 -m t 0 s 0 d 0 (Using transport-0, move media from slot-0 to drive-0)
mct-x64 -m t 0 d 0 s 0 (Using transport-0, move media from drive-0 to slot-0)
mct-x64 -m t 0 s 0 s 100 (Using transport-0, move media from slot-0 to slot-100)
mct-x64 -m t 0 d 0 d 1 (Using transport-0, move media from drive-0 to drive-1)
mct-x64 -m t 0 s 0 ie 0 (Using transport-0, move media from slot-0 to IEPort 0)
Once you move a tape into a drive, use mytape commands Loadtape, taperewind, locktape, Disable hardware compression, Set block size to 65536 (64K), writeforspanning.
You need the symbolic name for the tape drive you loaded media into - look in the DPM console by clicking the tape drive and look at the details for
\\.\tape########. use that in the following command.
Mytape.exe \\.\Tape2147483638
Status: Getting the handle for \\.\Tape2147483638...Success
TapeConsole_1.0>taperewind">\\.\Tape2147483638>TapeConsole_1.0>taperewind
Status: Rewinding Tape ...Success
TapeConsole_1.0>setdriveinfo">\\.\Tape2147483638>TapeConsole_1.0>setdriveinfo
Hardware error correction [y]-Enable / [n] Disable : y
Hardware data compression [y]-Enable / [n] Disable : N (BE SURE TO DISABLE)
Data padding [y]-Enable / [n] Disable : n
Setmark reporting [y]-Enable / [n] Disable : n
Number of bytes between the end-of-tape warning and the physical end of the tape: 0
Status: Setting Drive Information...Success
TapeConsole_1.0>writeforspanning">\\.\Tape2147483638>TapeConsole_1.0>writeforspanning
Status: Writing onto tape...Failed !!!
Error_ID reported: 1100 (net helpmsg 1100
= The physical end of the tape has been reached.
Number of bytes written: 983040 (Ignore bytes written, we'll get physical tape position later)
Giving up
Time taken: 15788ms
TapeConsole_1.0>taperewind">\\.\Tape2147483638>TapeConsole_1.0>taperewind
Status: Rewinding Tape ...Success
REPEAT
TapeConsole_1.0>erasetape">\\.\Tape2147483638>TapeConsole_1.0>erasetape s
Short erase / Long Erase [s/l]:Status: Erasing the tape...Success
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
Recurring (empty?) Error During Backups
Every night, when an RMAN backup is kicked off for our XE database, I've noticed that this gets written in the alert log...
Sun May 20 23:02:11 2007
Errors in file c:\oraclexe\app\oracle\admin\xe\udump\ctxmgmt_ora_17812.trc:
The trace file itself always looks liks this:
Dump file c:\oraclexe\app\oracle\admin\xe\udump\ctxmgmt_ora_17812.trc
Sun May 20 23:02:11 2007
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Windows Server 2003 Version V5.2 Service Pack 1
CPU : 1 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:298M/1019M, Ph+PgF:1111M/1953M, VA:1512M/2047M
Instance name: ctxmgmt
Redo thread mounted by this instance: 1
Oracle process number: 28
Windows thread id: 17812, image: ORACLE.EXE (SHAD)
*** 2007-05-20 23:02:11.453
*** ACTION NAME:(0000158 STARTED16) 2007-05-20 23:02:11.421
*** MODULE NAME:(backup full datafile) 2007-05-20 23:02:11.421
*** SERVICE NAME:(SYS$USERS) 2007-05-20 23:02:11.421
*** SESSION ID:(17.14879) 2007-05-20 23:02:11.421
*** ACTION NAME:(0000187 STARTED16) 2007-05-20 23:02:15.374
*** MODULE NAME:(backup full datafile) 2007-05-20 23:02:15.374
Unless I'm missing something, there's no content to the above message. Does anyone understand what causes this? And if so, how to correct it? Thanks.
- GaryIt doesn't look like an error message. It looks like a simple backup log.
Is there a real error message on the rman logs?
Do you gather a log when launching the batch job?
Is the rman task completed?
As soon as rman finds something wrong it aborts the backup job, so if by testing the backup and verifying logs everything is OK, this can be considered just as a regular log message, not an error.
Start an RMAN session and check if there are any issues with your previous backups. -
Error during Backup/Recovery settings configuration
Hi all,
Using the Oracle Enterprise Manager 10g Application Server control,
i am configuring backup/recovery settings for my infrastructure tier in a 10g Rel 2 application server environment. however after specifying the various locations for Log Files, Configuration files, Metadata repository database backup etc i get the following error after clicking the 'Ok' button.
An Internal Error has occurred while performing the operation.
Performing configuration ...
oracle_sid: cinfra
The command /oracle/appn/oracle/infra/perl/bin/perl /oracle/appn/oracle/infra/backup_restore/bkp_restore.pl -m configure -h /oracle/appn/oracle/infra -f > /infrahome/backups/log_files/2009-12-06_17-13-38_output.log failed with return code 255
i am at a loss as to why i am having this error and how to fix it.
I examined the log file and saw an error snippet saying
*"Unable to get dbid from the database. Please ensure that ORACLE_HOME and ORACLE_SID are set to the same values used when starting up the database and that the database is open.... Failure: Configure failed"*
Also examined another file generated at the same time as the output log file and in there i saw the following
*"ld,so.1: oracle: fatal: relocation error: file /oracle/appn/oracle/product/10.2.0/cm2t/lib/libjox10.so: symbol kgestKguard_: referenced symbol not found*
*ERROR:*
*ORA-12547: TNS: lost contact*
*SP2-0751: Unable to connect to oracle. exiting SQL*Plus"*
Apart from the infrastructure database, i have another database with SID 'cm2t' on the same machine and i am suspecting that OEM Application server control is referencing the wrong file while it's doing it's work. How do i tell it to look in the right place if indeed that is the cause of my problem?
In my config.inp file all the right parameter values are in place.
Thanks.
Steve.Hi AMN,
Thanks for your reply. I managed to solve it by taking the following steps.
I use the runstartupconsole.sh script to start up my infrastructure tier. At startup it was using an LD_LIBRARY_PATH pointing to that used by an existing Oracle database instance on the same machine.
I set ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH etc correctly before running the runstartupconsole.sh script and after that i was able to setup my backup/recovery settings properly.
I hope this will be useful to others.
Steve. -
Error during backup to DVD: Unknown Error when burning to disc (261)
I'm writing on behalf of my brother who has an HP Pavilion ZE2120CA laptop and is using the latest version of iTunes. We were backing up his purchased music onto DVD but just after it says "Burning Disc Initialized" the disc ejects from the drive and it says this cryptic error message. We also tried connecting an external Plextor drive via USB2 - same thing. Any suggestions, white papers or documents out there that'll help us? Also feel free to talk technical to us because I am A+ Certified and while my brother is an English major he also has an intimate knowledge of computers and has several programming courses under his belt.
Thanks,
Steve and Dan LeDuke
Waterloo, ON CanadaLook at some of the other topics. Many of them deal with backup problems since the release of version 7.3. Quite a few of them deal with your situation.
-
Acrodist.exe & Acrobat.exe error during install
I've tried to talk to 4 different tech support 2 days ago with no help being provided.
I'm upgrading from Acrobat 6.0 Standard to Acrobat 9.0 Pro on an EFI Fiery server that's attached to my Xerox Docucolor 240.
I follow the instructions of the installation of 9.0 and halfway through an error "Program Error: acrodist.exe has generated errors
and will be closed by Windows. You will need to restart the program. An error log is being created. OK" pops up. The installation continues and says everything is successful in installation.
I double click on Acrobat 9.0 icon and it pops up another error window saying "Program Error: Acrobat.exe has generated errors and will be closed by Windows. You will need to restart the program. An error log is being created. OK"
I checked the error log and it says "Failure to connect to server".
I uninstalled every Adobe program running in the background, turned off my firewalls, and the same thing keeps happening.
I really need to get this installed asap for a printing order that is getting ready to hit my machine.
Please help me!
Thanks,
DanBill,
This is a print server/command workstation which all the print files come
to along with file editing before it goes to the printer. It's operating
system is Windows XP embedded. The tower is by EFI for Xerox EXP250 Model
S450-03.
The system came with Adobe Acobat 6.0 Standard, Quite Imposing, and Pit
Stop. We do all impositions on this machine before releasing it to our
Xerox Docucolor 240.
The reason we are trying to upgrade is that we were having problems with
characters and type dropping off prints after imposition. We are trying to
take care of future problems with compatibility of files by upgrading.
Once we get Adobe Acrobat 9.0 Pro installed on this Fiery, it will only be
used on this machine and not accessed by any other computer on the
network.
Any help with getting this set up will be greatly appreciated.
Thank you.
A key word in your message that may also be related to the issues you are
having it SERVER. I don't know if that is some other OS or a server with
Windows installed. In any case, installing the basic Acrobat package on a
server is a violation of the End User License. IF you have negotiated a
license for your application, then give more information about the system
so maybe we can help.
> -
Unknown error during backup of Bluetooth options
I tried to backup my 8900 curve via USB connected to Desktop Manager 4.7 (German) and get every time an "unknown error" at the "Bluetooth Options" part of the backup. The backup aborts at this point.
Any ideas?
Regards
ErikOnce I too faced similar issue. To get rid of it go to Backup and Restore -> click Advanced -> select Bluetooth Options -> click on clear to deleted those options. Now try to have a backup you device.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit
Maybe you are looking for
-
How to I connect to my pc via network
Does anyone know how to connect to a pc? I set up sharing on my pc with the help of compaq tech support, I have pinged my mac from my pc and pinged my pc from my mac. I can share from pc by dragging files to the mac. But, I cannot connect to my pc. I
-
Safari pre-fills form fields like email addresses, how do I get it to stop?
On certain Safari form fields my computer fills in the rest of a word I recently typed if I type the first letter, but I want to either get it to stop doing that or also learn how to clear that history every once and a while - how do I do that?
-
Unable to connect to server macromedia.dreamweaver
I all I use to access macromedia.dreameaver forum from window mail. Now I'm unable to connect to server anymore. Is it still in operation? Thank you
-
Custom Adobe Photoshop Elements 8.0 deployment error
I am working on developing a custom MSI to deploy Photoshop Elements 8.0 in our company and I am getting the following error message: Install adobe photoshop elements 8.0 using the setup.exe in the root folder I was hoping someone could assist me wit
-
Can XP be installed on a new i7 macbook pro?
can XP be installed on a new i7 macbook pro?