AppleMobileDeviceSupport not installable

Hello altogether,
yes, it sounds like a problem, that was posted a hundred times in several forums. But I was searching and testing over and over and I do not find a solution for my problem.
What I wanted to do, was to update iTunes. So I deinstalled Itunes. After reinstalling the new version, I got an error on starting Itunes. So I found a 'solution' on the apple support homepage how to uninstall ITunes completly - including the files that are left after uninstalling ITunes.
Then re-installing worked fine...the installer went through and I could start Itunes.
When plugging my Iphone4, there comes an error that says basically, that the AppleMobileDeviceSupport is not running (after trnaslation in google).
Yes - it is not running AND it is not present also. The files are not there in /porgram files/common files/apple mobile device...
Hmmm what else .. re-installed again and again, used a registry cleaner - no effect.
Then I found out, that I can extract Itunes_setup.exe so that I can run the installer for AppleMobileDeviceSupport independently. And on installation it throws an error. The other msi's install without error.
So now I need to know, if I can activate a trace-file or if the installer writes a log-file, where I can see, why the installation fails. What I can see, is that the errors 1033 and 1603 are visible after failed installation in windows 'action protocol'. (I don't know this name in english - maybe application log of windows).
Did anyone of you have the same problem?
A hint apart from 'reinstall windows' or "use iOS" would be nice
Thanks a lot and regards,
Rolf

At what step exactly are you having the problem?
I have not seen the screen where you choose the source for packages.
When the first cdrom boots I get the following screens in order:
1. boot:
2. CD found (here you can test the media)
3. Welcome to Enterprise Linux
4. Language Selection
5. Keyboard configuration
6. Installation Type (server/workstation/...)
7. Disk Partitioning Setup
Then the installation proceeds successfully.
I tried to install the french version also and it proceeds to step 6 above without asking for source of the packages as indicated by you. Please update.

Similar Messages

  • Error message with offer to download the 4.1.B.0.587 update and note: "installation not possible" (because it's already there) cannot partition SD card

    Hi - Recently I put the latest update on my LT15i (4.1.B.0.587), after this I rooted the phone, and everything seemed okay. But since then I keep getting an error message with an offer to download the 4.1.B.0.587 update and the note: "installation not possible" (because it's already there). The news line on top shows a red exclamation mark all the time. It seems to me that it is due to this error that I cannot partition my SD card. Does anybody have an idea how to fix that? Thanks much in advance, and happy holidays - nerissa

    Moved thread to Android development.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • IPhone composition   The payload of   and mobile device management is not installable in a utility.

    Hello.
    You.
    And thank you.
    I want you to help me if you please.
    I am not good at English.
    The status code of 201,204 which Apache returns from a MDM server.
    iPhone composition   The payload of   and mobile device management is not installable in a utility.
    iPhone composition   Console of a utility.
    May 1 09:46:15 unknown mc_mobile_tunnel[13281] <Notice>: (Note) MC: mc_mobile_tunnel shutting down.
    May    1 09:46:18 unknown. profiled [13274] <Notice>:   (Note)  MC:   Checking. for. MDM installation ... May 1 09:46:18 unknown profiled[13274] <Notice>: (Note) MC: ...finished checking for MDM installation.
    May    1 09:46:18 unknown. profiled [13274] <Notice>:   (Note)  MC:   Beginning. profile. installation ... May 1 09:46:20 unknown profiled[13274] <Notice>: (Error) MDM: Cannot Authenticate. Error: NSError:Desc     : Since a transaction with the server in "https://www.anetm.com/dav/chkin" was in the situation of "204", it failed.
    US Desc:   A transaction with the server at"https://www.anetm.com/dav/chkin"has failed with the status"204."
    Domain : MCHTTPTransactionErrorDomain
    Code   : 23001
    Type   : MCFatalError
    Params : (
    "https://www.anetm.com/dav/chkin",
    204
    May    1 09:46:20 unknown profiled [13274] <Notice>:   (Error) MC:   Cannot install MDM "mobile device management" .Error:   NSError:
    Desc    :   A payload "mobile device management" was not able to be installed.
    Sugg    :   Since a transaction with the server in "https://www.anetm.com/dav/chkin" was in the situation of "204", it failed.
    US Desc:   The payload "mobile device management" could not be installed.
    US Sugg:   A transaction with the server at"https://www.anetm.com/dav/chkin"has failed with the status"204."
    Domain : MCInstallationErrorDomain
    Code   : 4001
    Type   : MCFatalError
    Params : (
    "\U30e2\U30d0\U30a4\U30eb\U30c7\U30d0\U30a4\U30b9\U7ba1\U7406"
    ...Underlying error:
    NSError:
    Desc    :   Since a transaction with the server in "https://www.anetm.com/dav/chkin" was in the situation of "204", it failed.
    US Desc:   A transaction with the server at"https://www.anetm.com/dav/chkin"has failed with the status"204."
    Domain : MCHTTPTransactionErrorDomain
    Code   : 23001
    Type   : MCFatalError
    Params : (
    "https://www.anetm.com/dav/chkin",
    204
    I would like to solve this problem.
    If you please, please help me.

    Hello Jack,
    Thank you for providing the details about the Apple Mobile Device USB Driver is not being listed.  I found an article with some additional steps you can take. 
    I recommend following the steps in the section titled "If the Apple Mobile Device USB Driver is not listed" in step 5 of the following article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Driver not installe

    My V Plus is detected under device manager/other devices but is not detected when i open window media player 0 or window explorer. I had read some threads here asking me to uninstall and re-install, but the wizard was unable to find the software for installation despite i using the installation CD provided by CREATIVE.
    When i looking at my Device Manager/Other Devices/CREATIVE Zen V Plus, Properties tab, the device status reads
    "The drivers for this device are not installed. (Code 28)
    To reinstall the drivers for this device, click Reinstall Driver."
    When i click reinstall driver, it goes back to the same problem the wizard is unable to find any software for installation.
    pls advise.

    Makes sense:
    Windows XP Home, fully updated (auto updates)
    Windows Media Player
    Nomad Jukebox Zen Xtra firmware 2.0.03
    Driver: JB3MV2_PCWDRV_US__30_03.EXE downloaded from here.
    When I run the driver at two points it says skipping file looks like dll but too fast to read. It keeps running and gives an "installation Complete" and tells me to reconnect the device for the driver to take effect.
    I hook up the Zen and get new hardware found for both Zen and MTP device. The new hardware wizard runs asking for the software CD (I don't have it) . I pick install automatically, it searches, starts installing then fails:
    "Cannot install this hardware/There was a problem installing this hardware/nomad jukebox zen xtra/an error occurred during the installation of this device/ A SERVICE INSTALLATION SECTION IN THIS INF IS INVALID"
    then Finish.
    Device manager shows nomad jukebox zen xtra under portable devices with a yellow backgrounded exclamation point. Double click and get:
    "device: portable
    manufacturer: standard MTP
    Location: location 0 nomad jukebox zen xtra
    Drivers for this device not installed (code 28)"
    I reinstall, pointing first at "windows/inf" and then another try at "creative/jukebox3 drivers" folders both with the same problem of "cannot install this hardware".
    I'm at a loss.
    Thanks in advance for any help.

  • Two new IDE-Controllers after BIOS update, but not installable

    Hi there,
    i recently updated my bios to the latest version and now the following strange thing happens:
    when i boot my machine (875P NEO, P4 2.8 GHz, 1 GB RAM, 2 Otical drives at IDE0, 2 S-ATA drives at the S-ATA-controller, WIN XP SP), there are two new IDE (primary and secondary) Chanels to be found by the system.
    Windows seems to act normal as it states them "new device found" (all that in german as i live here and tries to install the proper drivers, i think.
    but then the new-devices-assistant pops up and tells me, that they cannot be installed because there are no drivers for my system.
    i even used the actual inf-drivers from the msi-site.
    that will happen at every start. in the hardware-manager there are both ide-devices marked as non-functional with a yellow sign in front of them with a exclamation mark in it.
    oh, and my office installation wants the same .cab-file from the installation-cd everytime i boot the system.
    the bios was the only thing changed.
    does anyone have an idea whatr to do?
    thanks in advance, cpo
    (hope that all is understandable

    yeah, seems like the same symptoms.
    my version was 3.6 from october 2004. Version 3.5 from september works fine except for the cpu temperature beeing displayed too high in bios...
    rollback to 2.5 did not work, still the same though i did not do the thing with the cmos-reset via jumper. will try this today...

  • Bootcamp, ATI 4850 driver not installs on windows 7 x64.

    Hi all, I need some help with ATI driver installation.
    I followed Windows x64 installation instructions available
    on Apple page.
    Here is how I installed Windows 7 x64:
    1. Partitioning - went fine.
    2. Windows 7 x64 Installation - black screen issue encountered.
    3. I prepared usb drive as described on apple page - didn't work
    Black screen again - I rebooted several times with no success.
    4. I removed atikmdag.sys- according to description found on the internet.
    5. Then I was able to complete installation.
    6. Installed Bootcamp 3.0 from MaxOS CD
    7. I was asked for reboot - I confirmed.
    8. Black screen again!
    9. I repeated point 4 (atikmdag.sys removal) and then
    was able to login to Win7
    10. I installed Bootcamp 3.1 for windows 64 update.
    11. I was asked for reboot - I confirmed.
    12. Black screen AGAIN!
    13. I repeated point 4 AGAIN (atikmdag.sys removal) and then
    was able to login to Win7
    14. I tried to repeat unistall/install of Bootcamp 3.0/3.1
    several times with the same result:
    A). Install Bootcamp
    B). Bootcamp asks for reboot
    C). Black screen issue
    D). manual atikmdag.sys removal
    E). go to A.
    I also tried ATI Catalyst drivers installation but there is still Black screen issue and driver is not really installed.
    Also I executed Windows Update and tried to install ATI driver
    from there, but its installation fails!
    I have iMac i7 8GB RAM - just got it two days ago and can't it really use with Win7
    I'll appreciate any help.

    Plug in another monitor this will fix the problem. windows/apple (one of the two) turns the mini port in the back into the main output. once you plug in a new monitor the install will continue and the drivers are updated of the apple disc will will be able to unplug the monitor and everything should be ok.

  • PSE 11 not installable - rollback @ common technologies installing

    Have had the pretty idea to change from my old graphic-suite to PS, so wanted to checkout PSE 11 first and started downloading the Trial Version with the Intention to purchase it after installing, maybe also an upgrade to PS CS6, if I would succeed.
    But no Chance, installing up to  the organizer went fine, at the end of this, there came up the message about a Problem with the common Technologies.... - as well known in the Forum. So I checked out all "Solutions" (there was no one to find, which resolves the Problem at the root and in general....) - nothing worked. The problems and time wastings are even enough posted here in the forum and no contribution from Adobe.....So I went to ask at the Chat-Support, what was the greatest disappointment: Despite I posted my intention to buy (money, money!!!!) one or two products, I got advised, for trial-products there is no support. Despite I argued if I cannot install even the trial version, I can expect it will be the same with the purchased one - and why I should buy this if I know it is uninstallable? The ADOBE chat Partner closed the chat. So I am standing here, no chance to get installed PSE 11.
    - Is there no knowledge how to solve this problem, what is not only mine?
    General info: Dell XPS 420, Intel Core 2 Quad CPU Q6000 @2,4 GHz, 4(3,...) GB Memory, Win 7 Ultimate 32b, Grafic: AMD Radeon 7850, 3 HDD (500,500,1000 MB)

    Refer to this:
    Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
    If your iussues persist, you need to explain better what solutions you actually tried and what else you may have doen to remedy the problem(s).
    Mylenium

  • Trying to download whole JDK & JRE and NOT installation programs

    Hi all,
    I want to download the JRE and JDK in one go and not download an installation program for each one. Ive searched everywhere but surely sun must provide these? Also does anyone know where i can get my hands on a downloadable version of the API docs?
    Many thanks

    Please note that this applies to the currrent java version installed on "standard" windows systems, only.
    To download the current version of Java, go here:
    http://java.sun.com/j2se/1.4.2/download.html
    and click on the word DOWNLOAD in the column labeled SDK in this line: Windows Offline installation (info)
    The API documentation can be downloaded from this same page, just scroll down...
    After downloading, click on this page of installation instructions and read through #6:
    http://java.sun.com/j2se/1.4.2/install-windows.html
    Install the software according to the preceeding instructions. During the installation process, you will be asked if you want to install a public JRE. Answer YES, this is the separate JRE that gets installed in C:\Program Files\Java\j2re1.4.2_01.
    If you encounter problems, see the section "Troubleshooting the Installation" in the installation instructions.

  • Not-installable Oracle Linux (and RH too)

    Hello
    I've downloaded 4 CDs of Linux on edelivery and burnt them as ISO.
    The first CD boots..i'm happy
    I select french for language and keyboard.
    Then the installer asks for me to choose the source for packages. I choose CD-ROM
    Then i have the error: no CD-ROM found.
    It sucks
    I go back to Windows, hoping someone has a tip
    thanks

    At what step exactly are you having the problem?
    I have not seen the screen where you choose the source for packages.
    When the first cdrom boots I get the following screens in order:
    1. boot:
    2. CD found (here you can test the media)
    3. Welcome to Enterprise Linux
    4. Language Selection
    5. Keyboard configuration
    6. Installation Type (server/workstation/...)
    7. Disk Partitioning Setup
    Then the installation proceeds successfully.
    I tried to install the french version also and it proceeds to step 6 above without asking for source of the packages as indicated by you. Please update.

  • Is there a download of software (not installer) as we are installing on machines with no connection to internet.

    Is there a way to download firefox to a USB without the installer so I can install it on several PCs?
    We are using Oracle Forms in house. No internet connection as it is secure from outside.
    Internet Explorer is not working well, so we want to try Firefox.

    It is usually best to use the full installer on Windows to make sure that necessary registry keys get created.
    You can find the full version of the latest Firefox 22.0 release in all languages and for all Operating Systems here:
    *http://www.mozilla.org/en-US/firefox/all.html
    You can copy the installer to an USB stick and use that to install the program.

  • Safari 1.3.1 not installable, thank goodness(?)

    I asked a question about updating to the latest Safari version. I wanted 2.0 but was told that is reserved for TIGER so okay, I had 1.2 (and it seemed to be working fine) and was given directions to the download of "MacOSXUpdateCombo 10.3.9.dmg" and so I got Safari 1.3. It seems to be working fine. So I downloaded Safari 1.3.1, as directed. I opened it and tried to install it but when I get to 'select a destination' I get the 'RED exclamation point' and the message "You cannot install this software on this volume. This system cannot use this software". Now I certainly cannot use it if I am not allowed to unstall it. I have 1.3, so why can't I install it?
    I checked out 1.3.1 problems on the discussion board and it seems to have a lot of them. My Safari (i.2?/1.3?) had been crashing more often (which I figured was due to increased website complexities) and was quite happy to have a newer browser version to deal with those. It appears that 1.3.1 introduces a whole new tier of crashes along with the same installation problem I'm having. The previous question wasn't answered and it may be moot because I'm not sure I even want Safari 1.3.1 as it seems rife with problems. 1.3.2 by extension appears worse.
    My questions are:
    1) Is 1.3.1 installable? and If so, how? Why am I getting this "uninstallable" message?
    2) Do I really want 1.31? What advantages over 1.3 does it provide?
    3) Should I be able to install 1.3.1 will I want 1.3.2?
    Please make the response(s) as close to how to put on a baby's diaper as possible (step by step in easily followed format).

    Hi BHJ
    regarding the install for 1.3.1 being refused & ref your question I answered about Safari versions here.....
    I spoke to a friend who re-installed panther this year & reckons that the 10.3.9 combined update she used did include Safari 1.3.2 this may explain why the update won't work - you could already have it.....
    I based my reply on the release dates of the various updates shown by Apple on their downloads pages
    combined update - 04/15/05
    Safari 1.3.1 - 08/29/05
    and Safari 1.3.2 - 01/11/06
    but if my friend is right ( & she usually is ) it would seem that Apple may have modded the combined update to include 1.3.2 Either that, or the dates are screwy.
    & Hi Barry - nice to see you here again - you found a rare gap in the traffic

  • Speech analysis German not installable

    Using Premiere Pro CC on Win7 64bit
    I just downloaded and installed the "Speed analysis modell" for german language (double-clicking the downloaded .exe-file from here[1]). After restart of Premiere and reboot of the system the language does not apear when I start analysing the content.
    What did I wrong?
    [1]
    http://www.adobe.com/de/products/premiere/extend.displayTab3.html

    Hi
    I've had the same thing.
    The problem is that the setup isn't optimized for the CC version.
    But you could help yourself manually!
    Setup is copying all files to this folder:
    C:\Program Files (x86)\Common Files\Adobe\SpeechAnalysisModels\CS6
    But the files have to be here:
    C:\Program Files (x86)\Common Files\Adobe\SpeechAnalysisModels\4.0
    I did only move the "de_DE" (German) in the root folder and "German" in the "support" folder. from "CS6" to "4.0".
    It's that easy...!
    Then it works in CC!
    Cheers
    Stevee

  • Satellite L750: WLan LED is OFF / Bluetooth driver not installable

    Hi, can anyone tell if this is known issue or not.
    This is "Out-of-the-box" condition.
    1) the rightmost wireless communication indicator lamp is always off regardless the status of internet connection. Typically, wireless internet connection is not detected upon boot-up, therefore FN+F8 and "All-on" step is required till I get internet connection be established.
    2) In this situation, if I try to switch on Bluetooth (for me to be able to use Bluetooth mouse), it starts installing Bluetooth driver but is terminated in the half way saying that "Bluetooth can not be powered on, turn on button on the side of the unit"- obviously there is no physical button or switch on my laptop corresponding to this statement.
    To make matters worse, if I try to update BIOS to the latest version, the file contains trojan horse virus (as of 3 Dec 2012, 10pm, New Zealand time) and I was unable to update.
    I updated the third party wireless lan driver (64 bit) but it doesn't seem to fix the problems.
    Thank you
    Please can anyone help me?
    L750
    Model: PSK2YA-0T102S
    Message was edited by: tshskzk

    Hi
    What system are you using? Win 7 or Win 8?
    Using Fn + F8 switches the Wlan and BT on and off.
    Using Win 7 you can enable and disable WLan or BT but using Win 8 the FN + F8 would disable Wlan and BT at the one and the same time.
    I have no idea what WLan card you have but I think that one module contains WLan and BT functionality. So if you want to install BT stack you have to install firstly the Bluetooth filter (i.e if you have Atheros Wlan card you have to install Atheros BT filter BEFORE BT stack).
    It looks like the unit is from Australian so I recommend checking the Toshiba AU driver page to get all the drivers

  • Z8000 not pairing with probook 6475b - peripheral driver not installled

    Hi!
    i've bought a z8000 mouse, and it does not pair with HP Probook 6475b neither with my Macbook.
    When trying to do it with the HP Notebook, it tells me that the peripheral driver was not installed (COM5).
    When doing it with a mac, the mouse doesnt even appear as a Bluetooth Device.
    Tks
    Marco

    Nope. You don't delineate where you're coming from, and the simplest solutions should always be tried first. Hope you find your answer.
    Cheers.

  • Can not installe itune v10. I have this message : "unable to open key UNKNOWN\Components\DA42BC89BF....

    Hello everybody,
    Everithing is in the title...
    During the installation of iTunes 's update V10.5 I have the following message : "unable to open key UNKNOWN\Components\DA42BC89BF...."
    Thanks for yur help !

    Google this forum. You aren't the first and some had success.
    It depends on what version you had, whether you are running 674-bit Windows and whether Vista/7 but help us out too. Then as always google the error with "apple itunes" and see.

Maybe you are looking for