AppleMoblieDeviceHelper.exe - error while setting up the environment...
I am having problems with iTunes 8.2.1.6 on my Vista PC. I am getting the following two errors whenver I try to sync my iphone 3Gs:
(1) 16bit MSDOS subsystem: c:\program files\common files\apple\mobile device support\bin\applemobiledevicehelper.exe - Error while setting up environment for the application. Choose 'close' to terminate the application. This error message continues to show up even when I hit 'close'.
(2) iTunes was unable to load dataclass information from Sync Services. Reconnect or try later.
I have tried running both iTunes and applemobiledevicehelper.exe in administrator mode and that does not help. I have also tried reinstalling iTunes.
Any ideas?
Hi Sahil,
To address your scenario, while creating the configuration, select all the required agreements to create one configuration and then deploy.
Alternatively, you can also apply the latest patch MLR (10.1.2.3)
Regards,
Dheeraj
Similar Messages
-
ABAP Trial Version SP12:Error while setting up transport environment
Hi Folks,
I have successfully installed ABAP trial SP12 on my notebook(XP) and have been able to create some objects.
Thanks to very effective blogs by Manfred Lutz .
Now, I'm trying to set up the transport environment as per the blog but face the following error when I execute the step 'Distribute and Activate TMS Configuration'
Appreciate any help in solving the issue. I'm detailing below the error and the checks I had done.
******ERROR*************************************************************
ERROR:
Could not start transport control program tp
LONG TEXT:
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
I did the following based on the long text and after searching the forum:
*(1)*
Run program RSTPTEST to localize error.
The program gave the following result for the RFC destination 'CALLTP_WindowsNT':
********RESULT OF RSTPTEST***********************************************
"timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'#Timeout during connection setup (check that partner exists)"
*(2)*
Run the connection test in SM59 for destination 'CALLTP_WindowsNT':
The results were inconsistent. The connection test failed often but it was ok a few times.
The details of the connection failure are as follows:
*******CONNECTION FAILURE RESULTS******************************************************
Cancel
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' Timeout during connection setu
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host JayNB / sapgw00
DETAIL: no connect of TP D:\SAP\NSP\SYS\exe\run\tp.EXE from host JayNB after 2
COMPONENT: SAP-Gateway
COUNTER: 22
MODULE: gwr3cpic.c
LINE: 5873
RETURN CODE: 242
SUBRC: 0
RELEASE: 700
TIME: Sun Mar 23 11:07:53 2008
VERSION: 2
*(3) I then went to STMS and regenerated the RFC destinations and then ran the connection test. The result was OK.
Now, I again execute the 'Distribute and Activate TMS Configuration' step . It still gives the same error.
When I run the connection test in SM59, it results in error.
Further checks:***********************
(a) The permissions for folder SAP in the local directory were done as instructed in the blog.
(b) the directory path /SAP/trans/bin had the following files:
*TP_DOMAIN_NSP.PFL* : the last modified date changes every time I execute 'Distribute and Activate TMS Configuration'.
*DOMAIN* :The last modified date is in the past. It does not change.
Please inform how do I set up transport.
Jay
Code Formatted by: Alvaro Tejada Galindo on Apr 1, 2008 4:43 PMHi Krishna ,
Thank you for the suggestion.
I did as you suggested by inserting the mapping of ip and host in the hosts file.
and restarted the server,but I still get the same error "could not start transport control program tp".
Any other step that I'm missing.
Thanks again
Jay -
Error while setting up the ContentDB as the source for OSES
Hello Experts,
I am tring to create the ContentDB as the source to Oracle SES.
1. while creating the Identity plug-in for Oracle Internet Directory, I am passing the following information:
Host name: hostname of the OID
Port: 389 (non SSL)
Use SSL: false
realm name: name of the realm
User name: orcladmin
password: password of orcladmin
I am getting the error in log as follows:
invalid credentials for entity user orcladmin
OID plugin activation failure
caught plugin exception: [LDAP: error code 49 - Invalid Credentials]
am I making any mistake in format of passing credentials or is there any prerequisit for activating the OID plug-in.
2. As per the doc of setting up the Content DB as the source to OSES:
http://download-west.oracle.com/docs/cd/B32393_01/doc/search.1018/b32259/sources.htm#CIAIHJEJ
the refers:
The administrator account used by the Oracle Content Database source must have the ContentAdministrator role on the site that is being crawled and indexed.
where and how this role can be assigned exactly.
Thanks
KrrisHello Raford,
Thank you very much for the reply..
Issue got resolved...it was due to the syntax I was following while providing realm credential:
I was giving:
realm name: realm_name
correct syntax is:
realm name: cn=realm_name, dn=com
Thanks
Krrish -
Error while setting up the EDI Inbound
Hi Guru's
We are trying to set up the 875 inbound. It had worked perfectly fine in past. While setting up for new partner we are getting following error
2009.03.18 at 05:17:17:237: Thread-100: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getAgreementDetails() fromTPP = TradingPartnerParticipant_DBCCtoTPP = TradingPartnerParticipant_DBCE
2009.03.18 at 05:17:17:239: Thread-100: Repository - (ERROR) Error -: AIP-11015: Object does not exist 6559DEFBDBD0B026E043C0A86365B026-298-1
at oracle.tip.repos.core.driver.CatalogDriver.getObject(CatalogDriver.java:759)
at oracle.tip.repos.core.driver.InternalObject.getAssociation(InternalObject.java:680)
at oracle.tip.repos.core.persistency.BaseObject.getAssociation(BaseObject.java:388)
at oracle.tip.model.agreement.ParticipantDeliveryChannel.getInternalChannel(ParticipantDeliveryChannel.java:212)
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:441)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:587)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:229)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1715)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)
at java.lang.Thread.run(Thread.java:534)
2009.03.18 at 05:17:17:242: Thread-100: Repository - (ERROR) Error -: AIP-11015: Object does not exist 6559DEFBDBD0B026E043C0A86365B026-298-1
at oracle.tip.repos.core.driver.InternalObject.getAssociation(InternalObject.java:690)
at oracle.tip.repos.core.persistency.BaseObject.getAssociation(BaseObject.java:388)
at oracle.tip.model.agreement.ParticipantDeliveryChannel.getInternalChannel(ParticipantDeliveryChannel.java:212)
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:441)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:587)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:229)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1715)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)
at java.lang.Thread.run(Thread.java:534)
2009.03.18 at 05:17:17:242: Thread-100: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: processIncomingMessage Exception
2009.03.18 at 05:17:17:242: Thread-100: B2B - (ERROR) Error -: AIP-11015: Object does not exist 6559DEFBDBD0B026E043C0A86365B026-298-1
at oracle.tip.repos.core.driver.InternalObject.getAssociation(InternalObject.java:690)
at oracle.tip.repos.core.persistency.BaseObject.getAssociation(BaseObject.java:388)
at oracle.tip.model.agreement.ParticipantDeliveryChannel.getInternalChannel(ParticipantDeliveryChannel.java:212)
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementDetails(RepoDataAccessor.java:441)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:587)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:229)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1715)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2404)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2303)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2258)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:500)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:348)
at java.lang.Thread.run(Thread.java:534)
Forums point to issue in our Control but its set up fine. Please advise.
Any pointers will be highly appreciable
Regards
SahilHi Sahil,
To address your scenario, while creating the configuration, select all the required agreements to create one configuration and then deploy.
Alternatively, you can also apply the latest patch MLR (10.1.2.3)
Regards,
Dheeraj -
Error while setting up the configuration for XI integration builder
Hi experts,
I am trying to configure the XI integration builder.
I have created an entry in table SPROXSET and created an RFC destination of type G.
After that I am trying to execute the SPROXY, I am getting an error "IFR_HTTP_DEST must not be set in table SPROXSET;"
( IFR_HTTP_DEST is the entry in the table SPROXSET)
Please give me solution to this error....This is very urgent.....
Thanks,
Madhuri.I am having the same problem:
detail:
I have set the echange parameters
com.sap.aii.server.contextRoot.repository.services=rep
com.sap.aii.server.httpport.repository=50000
com.sap.aii.server.name.repository=xiserver
TA: SLDAPICUST hostname=xiserver
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
returns
im exchange profilealdxi01:50000/rep
=>Check with report SPROX_CHECK_IFR_RESPONSE
givers: Integration Builder data not un
se38 shows a wrong url when debuging
http://xiserver:50000/rep/ifraccess?service=query&type=namespace
any suggesting
sproxy only shows the local entries and not the XI interfaces -
Error while setting up enviroment for the application
Hi,
Im getting a popup box displaying the error message
C:\WINDOWS\system32\ntvdm.exe
Error while setting up enviroment for the application. Choose 'Close' to terminate the application.
When I try to excute an external exe, why am I getting this error? and is there a way of getting this exe to execute properly without the error?
Here my code for excuting the external exe
String[] cmd = {"C:/gen.exe", "C:/a.zip"};
Process p = Runtime.getRuntime().exec(cmd);
p.waitFor(); "gen.exe" is the program i wish to execute and "a.zip" is the parameter i wish to excute it with.class ExecRuntime {
public static void main(String args[]) throws Exception {
String[] cmd = {"C:\\gen.exe", "C:\\a.zip"};
Process p = Runtime.getRuntime().exec(cmd);
p.waitFor();
} Here we need to use backslashes, because the command is passed to the OS as is.
If you need to be in C:\ to execute from command line, you will also need to use the
exec() version that allows you to specify the 'current directory'
Edited by: baftos on Mar 7, 2008 12:13 PM -
Getting error while setting up Apps Server VM
Hi All,
I'm getting couple of errors while setting up the apps VM. I was following the instructions at the link given below, but Im not getting any support from there so thought of posting here...
http://only4left.jpiwowar.com/2012/12/1hr-ebs-sandbox/
I'm getting the error while running the command...
/etc/init.d/oraclevm-template start
I'm posting content of log file here.... I'm posting the entire file as Im really clueless where the error is caused. Please help me get through this error.
Started ApplyAppsTier at Wed Dec 25 09:56:26 EST 2013
Version:
ApplyAppsTier.java : 120.4
# Calling ApplyAppsTechStack...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Executing home registration for s_weboh_oh...
Registering using Registration Driver
/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/driver/regclone.drv
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/adouiweboh.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/ouicli3.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/adlnkweboh.sh
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh to /u01/E-BIZ/inst/apps/VIS_jags/out/adlnkweboh1.sh
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/txkstubcfg1013.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/txkstubcfg10131.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/apachectl_sh_1013_oh.tmp
dest : /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl to /u01/E-BIZ/inst/apps/VIS_jags/out/apachectl1
setting permissions: 700
setting ownership: oracle:oinstall
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.3/perl/bin/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_weboh_ohWed Dec 25 09:56:30 2013
/u01/E-BIZ/apps/tech_st/10.1.3/jdk/bin/java -classpath /u01/E-BIZ/apps/apps_st/comn/clone/jlib/java:/u01/E-BIZ/apps/tech_st/10.1.3/oui/jlib/OraInstaller.jar:/u01/E-BIZ/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml -nolink -oaVar s_weboh_oh -homestub weboh -log /u01/E-BIZ/inst/apps/VIS_jags/admin/log/ohclone.log
NON-COMPLIANT: /u01/E-BIZ/apps/tech_st/10.1.3/oraInst.loc does not point to an inventory inside the current ORACLE_HOME
Rapid Clone only supports oraInst.loc at that location if its content points to an inventory inside the same ORACLE_HOME
Please make the necessary changes to the following file:
/u01/E-BIZ/apps/tech_st/10.1.3/oraInst.loc
Running OUI CLI home cloning from within OracleHomeCloner:
/u01/E-BIZ/apps/tech_st/10.1.3/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u01/E-BIZ/inst/apps/VIS_jags/admin/oraInst.loc session:ORACLE_HOME=/u01/E-BIZ/apps/tech_st/10.1.3 oracle.as.j2ee.top:s_asInstanceName=VIS_WEBOH__u01_E_BIZ_apps_tech_st_10_1_3 oracle.as.j2ee.top:s_adminName=oc4jadmin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_WEBOH__u01_E_BIZ_apps_tech_st_10_1_3 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_weboh_oh with return code: 0Wed Dec 25 09:57:24 2013
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh
script returned:
adlnkweboh.sh started at Wed Dec 25 09:57:24 EST 2013
Log file located at /u01/E-BIZ/inst/apps/VIS_jags/logs/ora/10.1.3/install/make_12250957.log
adlnkweboh.sh completed sucessfully
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.3/perl/bin/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl
script returned:
.end std out.
.end err out.
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/adouiweboh.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/ouicli.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/ouicli4.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/adlnkweboh.sh
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/adlnkweboh.sh to /u01/E-BIZ/inst/apps/VIS_jags/out/adlnkweboh2.sh
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/txkstubcfg1013.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/clone/txkstubcfg1013.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/txkstubcfg10132.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/template/apachectl_sh_1013_oh.tmp
dest : /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl
backup : /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/bin/apachectl to /u01/E-BIZ/inst/apps/VIS_jags/out/apachectl2
setting permissions: 700
setting ownership: oracle:oinstall
Completed home registration for s_weboh_oh
Executing home registration for s_tools_oh...
Registering using Registration Driver
/u01/E-BIZ/apps/tech_st/10.1.2/appsutil/driver/regclone.drv
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/adouitools.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/ouicli.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/ouicli.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/ouicli5.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/adlnktools.sh
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/adlnktools.sh
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/adlnktools.sh to /u01/E-BIZ/inst/apps/VIS_jags/out/adlnktools1.sh
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/txkstubcfg1012.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/txkstubcfg1012.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/txkstubcfg1012.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/txkstubcfg10121.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/ftrace_cfg_1012.tmp
dest : /u01/E-BIZ/apps/tech_st/10.1.2/forms/server/ftrace.cfg
backup : /u01/E-BIZ/apps/tech_st/10.1.2/forms/server/ftrace.cfg to /u01/E-BIZ/inst/apps/VIS_jags/out/ftrace1.cfg
setting permissions: 700
setting ownership: oracle:oinstall
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.3/perl/bin/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_tools_ohWed Dec 25 09:57:50 2013
/u01/E-BIZ/apps/tech_st/10.1.3/jdk/bin/java -classpath /u01/E-BIZ/apps/apps_st/comn/clone/jlib/java:/u01/E-BIZ/apps/tech_st/10.1.2/oui/jlib/OraInstaller.jar:/u01/E-BIZ/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml -nolink -oaVar s_tools_oh -homestub tools -log /u01/E-BIZ/inst/apps/VIS_jags/admin/log/ohclone.log
NON-COMPLIANT: /u01/E-BIZ/apps/tech_st/10.1.2/oraInst.loc does not point to an inventory inside the current ORACLE_HOME
Rapid Clone only supports oraInst.loc at that location if its content points to an inventory inside the same ORACLE_HOME
Please make the necessary changes to the following file:
/u01/E-BIZ/apps/tech_st/10.1.2/oraInst.loc
Running OUI CLI home cloning from within OracleHomeCloner:
/u01/E-BIZ/apps/tech_st/10.1.2/oui/bin/runInstaller -debug -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u01/E-BIZ/inst/apps/VIS_jags/admin/oraInst.loc session:ORACLE_HOME=/u01/E-BIZ/apps/tech_st/10.1.2 oracle.as.j2ee.top:s_asInstanceName=VIS_TOOLS__u01_E_BIZ_apps_tech_st_10_1_2 oracle.as.j2ee.top:s_adminName=ias_admin oracle.as.j2ee.top:s_adminPassword=welcome ORACLE_HOME_NAME=VIS_TOOLS__u01_E_BIZ_apps_tech_st_10_1_2 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_tools_oh with return code: 0Wed Dec 25 09:58:24 2013
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/adlnktools.sh
script returned:
adlnktools.sh started at Wed Dec 25 09:58:24 EST 2013
Log file located at /u01/E-BIZ/inst/apps/VIS_jags/logs/ora/10.1.2/install/make_12250958.log
Error while running adlnktools.sh.
return code = .46
Please check logfile located at /u01/E-BIZ/inst/apps/VIS_jags/logs/ora/10.1.2/install/make_12250958.log
.end std out.
.end err out.
Executing script in InstantiateFile:
/u01/E-BIZ/apps/tech_st/10.1.3/perl/bin/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3 -I /u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl -I /u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/txkstubcfg1012.pl
script returned:
.end std out.
.end err out.
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/adouitools.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/ouicli.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/ouicli.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/ouicli6.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/adlnktools.sh
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/adlnktools.sh
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/adlnktools.sh to /u01/E-BIZ/inst/apps/VIS_jags/out/adlnktools2.sh
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/txkstubcfg1012.pl
dest : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/txkstubcfg1012.pl
backup : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/clone/txkstubcfg1012.pl to /u01/E-BIZ/inst/apps/VIS_jags/out/txkstubcfg10122.pl
setting permissions: 700
setting ownership: oracle:oinstall
instantiate file:
source : /u01/E-BIZ/apps/tech_st/10.1.2/appsutil/template/ftrace_cfg_1012.tmp
dest : /u01/E-BIZ/apps/tech_st/10.1.2/forms/server/ftrace.cfg
backup : /u01/E-BIZ/apps/tech_st/10.1.2/forms/server/ftrace.cfg to /u01/E-BIZ/inst/apps/VIS_jags/out/ftrace2.cfg
setting permissions: 700
setting ownership: oracle:oinstall
Completed home registration for s_tools_oh
Completed home registration.
Skipping AutoConfig execution. AutoConfig will be run as a part of ApplyAppltop
ApplyApplTechStack Completed Successfully.
# Calling ApplyApplTop...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Skipping prodsetup driver processing; driver file not found at: /u01/E-BIZ/apps/apps_st/comn/clone//apps/driver/jags_prodsetup.drv
Executing runAutoConfig...
Deleting files of type INSTALL
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/icx/12.0.0/admin/driver/icxtmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/msc/12.0.0/admin/driver/msctmpl.drv
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/scripts/msc/mscmatlab.sh
File exists
File deleted
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ieo/12.0.0/admin/driver/ieotmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/bis/12.0.0/admin/driver/bistmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ams/12.0.0/admin/driver/amstmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/cct/12.0.0/admin/driver/ccttmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/wsh/12.0.0/admin/driver/wshtmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/cln/12.0.0/admin/driver/clntmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/oke/12.0.0/admin/driver/oketmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/okl/12.0.0/admin/driver/okltmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/oks/12.0.0/admin/driver/okstmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/csf/12.0.0/admin/driver/csftmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/igs/12.0.0/admin/driver/igstmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/iby/12.0.0/admin/driver/ibytmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/jtf/12.0.0/admin/driver/jtftmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/mwa/12.0.0/admin/driver/mwatmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/cn/12.0.0/admin/driver/cntmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/csi/12.0.0/admin/driver/csitmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/wip/12.0.0/admin/driver/wiptmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/fnd/12.0.0/admin/driver/fndtmpl.drv
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/Apache/Apache/conf/url_fw_ws.conf
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/Apache/Apache/conf/custom.conf
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/j2ee/oafm/config/mapViewerConfig.xml
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.2/network/admin/tnsnames.ora
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/network/admin/tnsnames.ora
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/admk80ln.sql
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/admk80ln.sh
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/txkWfClone.sh
File exists
File deleted
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/cse/12.0.0/admin/driver/csetmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/eam/12.0.0/admin/driver/eamtmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/fte/12.0.0/admin/driver/ftetmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/driver/adtmpl.drv
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/txkConfigAppsOcm.pl
File exists
File deleted
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/Apache/Apache/conf/url_fw_ws.conf
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/Apache/Apache/conf/custom.conf
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/j2ee/oafm/config/mapViewerConfig.xml
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.2/network/admin/tnsnames.ora
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/ora/10.1.3/network/admin/tnsnames.ora
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/admk80ln.sql
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/admk80ln.sh
Checking for file: /u01/E-BIZ/inst/apps/VIS_jags/admin/install/txkWfClone.sh
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ont/12.0.0/admin/driver/onttmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ar/12.0.0/admin/driver/artmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ahl/12.0.0/admin/driver/ahltmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ozf/12.0.0/admin/driver/ozftmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/ies/12.0.0/admin/driver/iestmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/csd/12.0.0/admin/driver/csdtmpl.drv
Processing driver file: /u01/E-BIZ/apps/apps_st/appl/igc/12.0.0/admin/driver/igctmpl.drv
Starting CVM.....
Using Context file : /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u01/E-BIZ/inst/apps/VIS_jags/admin/out/12250959/VIS_jags.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/template/custom/adxmlctx.tmp
Custom template : Not Available
Customizations found : None
File system Context file :/u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Wed Dec 25 09:59:56 EST 2013
found context version : 120.271.12010000.36
available update version : 120.271.12010000.36
No updates to apply
Ending Updates of Context file
===========================================================================
===========================================================================
Config Tool CVMHelper started at Wed Dec 25 09:59:56 EST 2013
===========================================================================
Updating local context file variables for Middle Tier
Checking file /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/template/adgendbc_ux.sh
FND_SECURE: /u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure
DBC FILE NAME: VIS
File exists, getting the version
Version: 120.8.12010000.6
No updates to s_fnd_secure needed
Writing Context File back to File System
Context file updated
Making database connection using DBUtil
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL=''
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : jagdish
sDbDomain : oracle.com
sDbPort : 1563
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@jagdish.oracle.com:1563:VIS
Exception occurred: java.sql.SQLException: ORA-28000: the account is locked
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jagdish.oracle.com)(PORT=1563))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: ORA-28000: the account is locked
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jagdish.oracle.com)(PORT=1563))(CONNECT_DATA=(SERVICE_NAME=VIS.oracle.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=jagdish.oracle.com)(PORT=1563))(CONNECT_DATA=(SERVICE_NAME=VIS.oracle.com)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
Exception occurred while preseeding variables in the context file: java.sql.SQLException: Could not get connection to the database
StackTrace:
java.sql.SQLException: Could not get connection to the database
at oracle.apps.ad.tools.configuration.CVMHelper.processNewContextFile(CVMHelper.java:875)
at oracle.apps.ad.context.CtxValueMgt.preSeed2Ctx(CtxValueMgt.java:1825)
at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1620)
at oracle.apps.ad.clone.ApplyApplTop.runCVM(ApplyApplTop.java:510)
at oracle.apps.ad.clone.ApplyApplTop.runAutoConfig(ApplyApplTop.java:552)
at oracle.apps.ad.clone.ApplyApplTop.doConf(ApplyApplTop.java:339)
at oracle.apps.ad.clone.ApplyApplTop.doApply(ApplyApplTop.java:382)
at oracle.apps.ad.clone.ApplyApplTop.<init>(ApplyApplTop.java:267)
at oracle.apps.ad.clone.ApplyAppsTier.<init>(ApplyAppsTier.java:105)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Thread.java:619)
===========================================================================
Starting synchronization of product tops at Wed Dec 25 09:59:56 EST 2013
Contextfile : /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
Topfile : /u01/E-BIZ/apps/apps_st/appl/admin/topfile.txt
Verifying system requirements:
ContextFile : VALID
TopFile : VALID
Updating the Contextfile:
[ s_blctop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/blc/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/blc/12.0.0
[ s_ipdtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/ipd/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/ipd/12.0.0
[ s_rhxtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/rhx/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/rhx/12.0.0
[ s_ozstop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/ozs/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/ozs/12.0.0
[ s_ozptop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/ozp/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/ozp/12.0.0
[ s_zsatop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/zsa/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/zsa/12.0.0
[ s_jtstop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/jts/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/jts/12.0.0
[ s_ibatop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/iba/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/iba/12.0.0
[ s_zfatop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/zfa/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/zfa/12.0.0
[ s_abmtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/abm/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/abm/12.0.0
[ s_imttop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/imt/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/imt/12.0.0
[ s_eaatop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/eaa/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/eaa/12.0.0
[ s_vehtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/veh/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/veh/12.0.0
[ s_amftop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/amf/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/amf/12.0.0
[ s_okrtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/okr/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/okr/12.0.0
[ s_okotop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/oko/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/oko/12.0.0
[ s_okbtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/okb/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/okb/12.0.0
[ s_rcmtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/rcm/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/rcm/12.0.0
[ s_xnstop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/xns/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/xns/12.0.0
[ s_fpttop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/fpt/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/fpt/12.0.0
[ s_xnmtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/xnm/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/xnm/12.0.0
[ s_xnitop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/xni/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/xni/12.0.0
[ s_xnctop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/xnc/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/xnc/12.0.0
[ s_evmtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/evm/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/evm/12.0.0
[ s_cuntop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/cun/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/cun/12.0.0
[ s_cuetop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/cue/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/cue/12.0.0
[ s_ahmtop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/ahm/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/ahm/12.0.0
[ s_metop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/me/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/me/12.0.0
[ s_rlatop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/rla/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/rla/12.0.0
[ s_csstop ]
Action : Add the Product
Path for Model : /u01/E-BIZ/apps/apps_st/appl/css/12.0.0
Path in Contextfile : /u01/E-BIZ/apps/apps_st/appl/css/12.0.0
Synchronization of product tops successful
===========================================================================
===========================================================================
Starting synchronization of product tops at Wed Dec 25 09:59:57 EST 2013
Contextfile : /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
Topfile : /u01/E-BIZ/apps/apps_st/appl/admin/topfile.txt
Verifying system requirements:
ContextFile : VALID
TopFile : VALID
No updates to Contextfile for Product Tops needed
Synchronization of product tops successful
===========================================================================
===========================================================================
Starting location of IANA character set
[s_iana_cset]
IANA Charset obtained from Database : null
IANA Charset present in Context file : UTF-8
IANA Charset based on APPL_TOP char set: UTF-8
IANA Charset decided for Context file : UTF-8
Action taken : None, since the correct value exists in the Context file
===========================================================================
===========================================================================
Starting Context Value Management System at Wed Dec 25 09:59:57 EST 2013
Using version 120.13.12010000.3
Options:
Force : no
Contextfile : /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
Templatefile : /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp
ValueUpdateFile : /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/admin/template/adcvmat.xml
Verifying value management system requirements:
ContextFile : VALID
Template File : VALID
ValueUpdateFile : VALID
Parsing the ValueUpdateFile
[ s_contextfile ]
Action : seed
Change reason : Setting the location to what has been specified by user
New value : /u01/E-BIZ/inst/apps/VIS_jags/appl/admin/VIS_jags.xml
[ s_javamailer_imap_user ]
Action : askUser
Change reason : These values will be used for the Java-based Workflow Mailer utility.
Expected value : changeOnJavaMailerInstall
Found value : NoImapUser
INFO : Customer has already set a value - skipping
[ s_javamailer_reply_to ]
Action : askUser
Change reason : These values will be used for the Java-based Workflow Mailer utility.
Expected value : changeOnJavaMailerInstall
Found value : NoReplyTo
INFO : Customer has already set a value - skipping
[ s_javamailer_imaphost ]
Action : askUser
Change reason : These values will be used for the Java-based Workflow Mailer utility.
Expected value : changeOnJavaMailerInstall
Found value : NoImapHost
INFO : Customer has already set a value - skipping
[ s_javamailer_imapdomainname ]
Action : askUser
Change reason : These values will be used for the Java-based Workflow Mailer utility.
Expected value : changeOnJavaMailerInstall
Found value : NoImapDomain
INFO : Customer has already set a value - skipping
[ s_ohs_serveradmin ]
Action : askUser
Change reason : This value will be used for OHS Administator email address.
Expected value : changeOnOHSInstall
Found value : [email protected]
INFO : Customer has already set a value - skipping
[ s_perl5lib ]
Action : translate
Change reason : Removal of hard-coded value in the templates.
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3:/u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3:/u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl]
Found value : /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3:/u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3:/u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl:/u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi
New value : /u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/5.8.3:/u01/E-BIZ/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3:/u01/E-BIZ/apps/apps_st/appl/au/12.0.0/perl:/u01/E-BIZ/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_tools_oranls ]
Action : translate
Change reason : ORA_NLS10 needs to point to the correct location.
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.2/ocommon/nls/admin/data]
Found value : /u01/E-BIZ/apps/tech_st/10.1.2/nls/data/9idata
New value : /u01/E-BIZ/apps/tech_st/10.1.2/nls/data/9idata
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_cmanport ]
Action : translate
Change reason : Removing hardcoded value of s_cmanport to use s_dbport instead
Expected value : [1521]
Found value : 1563
New value : 1563
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_tools_ldlib ]
Action : translate
Change reason : To support the third-party libraries in $SHT_TOP/lib
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.2/lib32:/u01/E-BIZ/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads]
Found value : /u01/E-BIZ/apps/tech_st/10.1.2/lib32:/u01/E-BIZ/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/u01/E-BIZ/apps/apps_st/appl/sht/12.0.0/lib
New value : /u01/E-BIZ/apps/tech_st/10.1.2/lib32:/u01/E-BIZ/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u01/E-BIZ/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/u01/E-BIZ/apps/apps_st/appl/sht/12.0.0/lib
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_oacore_ld_lib_path ]
Action : translate
Change reason : To support the usage of third-party libraries in $SHT_TOP/lib by the Java Concurrent Programs
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/lib32:/u01/E-BIZ/apps/tech_st/10.1.3/lib:/u01/E-BIZ/apps/apps_st/appl/cz/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/iby/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/pon/12.0.0/bin]
Found value : /u01/E-BIZ/apps/tech_st/10.1.3/lib32:/u01/E-BIZ/apps/tech_st/10.1.3/lib:/u01/E-BIZ/apps/apps_st/appl/cz/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/iby/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/pon/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/sht/12.0.0/lib
New value : /u01/E-BIZ/apps/tech_st/10.1.3/lib32:/u01/E-BIZ/apps/tech_st/10.1.3/lib:/u01/E-BIZ/apps/apps_st/appl/cz/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/iby/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/pon/12.0.0/bin:/u01/E-BIZ/apps/apps_st/appl/sht/12.0.0/lib
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jto_debug_string ]
Action : translate
Change reason : To reduce the default level of logging for the Fulfillment Server
Expected value : [full]
Found value : off
New value : off
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jto_log_level ]
Action : translate
Change reason : To reduce the default level of logging for the Fulfillment Server
Expected value : [9]
Found value : 1
New value : 1
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jtffstart ]
Action : translate
Change reason : To prevent the content of the DBC file from being written into the Fulfillment Server log file
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt]
Found value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
New value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jtffstart ]
Action : translate
Change reason : To prevent the content of the DBC file from being written into the Fulfillment Server log file
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=full -Dengine.LogLevel=9 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt]
Found value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
New value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jtffstart ]
Action : translate
Change reason : To prevent the content of the DBC file from being written into the Fulfillment Server log file
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=full -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt]
Found value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
New value : /u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPromptEnabled=false -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.dbc -Dengine.ServerID=5000 -Ddebug=off -Dengine.LogLevel=1 -Dlog.ShowWarnings=false -Dengine.FaxEnabler=oracle.apps.jtf.fm.engine.rightfax.RfFaxEnablerImpl -Dengine.PrintEnabler=oracle.apps.jtf.fm.engine.rightfax.RfPrintEnablerImpl -Dfax.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dprint.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.ServerInstanceID=5000 -DTurnOffLowPriorityMonitor=no -Dengine.MaxBatchThreads=12 oracle.apps.jtf.fm.FulfillmentServer >> /u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log/jtffmctl.txt
Check Condition : Unconditional
INFO : Customer has the new value already in place - skipping
[ s_jtffstart ]
Action : translate
Change reason : To prevent the content of the DBC file from being written into the Fulfillment Server log file
Expected value : [/u01/E-BIZ/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java -ms128m -mx256m -classpath .:/u01/E-BIZ/apps/apps_st/comn/java/lib/jdbc6.zip:/u01/E-BIZ/apps/apps_st/comn/java/lib/orai18n.zip:/u01/E-BIZ/apps/tech_st/10.1.3/lib/xmlparserv2.jar:/u01/E-BIZ/apps/apps_st/comn/java/classes:/u01/E-BIZ/apps/apps_st/comn/java/classes/3rdparty/RFJavaInt.zip::/u01/E-BIZ/apps/apps_st/comn/java/lib/appsborg2.zip -Dengine.LogPath=/u01/E-BIZ/inst/apps/VIS_jags/logs/appl/admin/log -Dengine.TempDir=/u01/E-BIZ/inst/apps/VIS_jags/temp -Dengine.CommandPort=9342 -Dengine.AOLJ.config=/u01/E-BIZ/inst/apps/VIS_jags/appl/fnd/12.0.0/secure/VIS.Please paste the log file of
/u01/E-BIZ/inst/apps/VIS_jags/admin/log/ApplyAppsTier_12250956.log
Also check
Troubleshooting RapidClone issues with Oracle Applications R12 (Doc ID 603104.1) -
I have this error trying to setup the environment : ORA-32101
i have this error trying to setup the environment :
the execution :
[]-pedro:/home/pedro/modelo_v4>./occiteste
inicio do programa
antes do env _environment
Can’t set the environment: Error while trying to retrieve text for error ORA-32101
[]-pedro:/home/pedro/modelo_v4>
here is a piece of the code :
Model.h
#pragma once
#include <iostream>
#include <stdlib.h>
#include <stdio.h>
#include <ctype.h>
#include <string>
#include <occi.h>
using namespace oracle::occi;
using namespace std;
private:
int ret;
Environment* env;
Model .cpp
Modelo::Modelo(void)
try
env = Environment::createEnvironment(Environment::DEFAULT);
catch (SQLException ea)
cerr << "Error : " << ea.what();
ret = 1;
[]-pedro:/home/pedro/modelo_v3>ldd occiteste
libocci.so.10.1 => /opt/users/ora10g/lib/libocci.so.10.1
libclntsh.so.10.1 => /opt/users/ora10g/lib/libclntsh.so.10.1
librt.so.1 => /usr/lib/hpux64/librt.so.1
libnss_dns.so.1 => /usr/lib/hpux64/libnss_dns.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libm.so.1 => /usr/lib/hpux64/libm.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libunwind.so.1 => /usr/lib/hpux64/libunwind.so.1
libstd_v2.so.1 => /usr/lib/hpux64/libstd_v2.so.1
libCsup.so.1 => /usr/lib/hpux64/libCsup.so.1
libc.so.1 => /usr/lib/hpux64/libc.so.1
libnnz10.so => /opt/users/ora10g/lib/libnnz10.so
librt.so.1 => /usr/lib/hpux64/librt.so.1
libnss_dns.so.1 => /usr/lib/hpux64/libnss_dns.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libm.so.1 => /usr/lib/hpux64/libm.so.1
libpthread.so.1 => /usr/lib/hpux64/libpthread.so.1
libunwind.so.1 => /usr/lib/hpux64/libunwind.so.1
libdl.so.1 => /usr/lib/hpux64/libdl.so.1
libuca.so.1 => /usr/lib/hpux64/libuca.so.1
[]-pedro:/home/pedro/modelo_v3>
thanksyes , the OBJECT gives the same result
the platform is HP-UX 64 bits :
/opt/aCC/bin/aCC DD64 -AA -DOCCI_NO_WSTRING=1 DD64 -D_RWSTD_MULTI_THREAD -I/opt/users/ora10g/rdbms/demo -I/opt/users/ora10g/rdbms/public -I/opt/users/ora10g/plsql/public -I/opt/users/ora10g/network/public -DHPUX -D_REENTRANT -DHPUX_KTHREAD -DSLXMX_ENABLE -DSLTS_ENABLE -DSS_64BIT_SERVER -DBIT64 -DMACHINE64 -DORAIA64 -DHPUX_IA64 -c Main_Program.cpp
/opt/aCC/bin/aCC DD64 -AA -DOCCI_NO_WSTRING=1 DD64 -D_RWSTD_MULTI_THREAD -I/opt/users/ora10g/rdbms/demo -I/opt/users/ora10g/rdbms/public -I/opt/users/ora10g/plsql/public -I/opt/users/ora10g/network/public -DHPUX -D_REENTRANT -DHPUX_KTHREAD -DSLXMX_ENABLE -DSLTS_ENABLE -DSS_64BIT_SERVER -DBIT64 -DMACHINE64 -DORAIA64 -DHPUX_IA64 -c Modelo.cpp
/opt/aCC/bin/aCC +DD64 -o occiteste Main_Program.o Modelo.o -L/opt/users/ora10g/lib -locci -lclntsh `cat /opt/users/ora10g/lib/sysliblist` -lm
[]-pedro:/home/pedro/modelo_v4>ls -la
DEFAULT is used for creating an Environment object; it has no thread safety or object support.
OBJECT is for creating an Environment object; it uses object features.
SHARED is for creating an Environment object.
NO_USERCALLBACKS is for creating an Environment object; it does not support user callbacks.
THREADED_MUTEXED is a thread safe mode for creating an Environment object, mutexed internally by OCCI.
THREADED_UNMUTEXED is a thread safe mode for creating an Environment object; the client is responsible for mutexing.
EVENTS supports registration for event notification used in Oracle Streams Advanced Queuing.
USE_LDAP supports registration with LDAP. -
Error While Setting Task Display - 11.1.1.4
Hi,
I have associated an ADF form with a human task. I can see the task, but the ADF screen doesnt show.
java.lang.NullPointerException
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.
setTaskDisplayInfo(TaskFlowPropsUtil.java:769)
at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeploye
rThread.registerTaskFlowWithTask(TaskFlowDeployerThread.java:261)
at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeploye
rThread.run(TaskFlowDeployerThread.java:129)
at java.lang.Thread.run(Thread.java:619)
<Feb 3, 2011 1:46:24 PM IST> <Warning> <oracle.soa.services.workflow.worklist> <
BEA-000000> <<.> Error while setting task display, this can happen with app load
ing issue, trying to load for 11>
I understand that previous fixes involved setting the adf-config file. I have done this by going into the domain directory... but no joy.
<adf-mds-config xmlns="http://xmlns.oracle.com/adf/mds/config">
<mds-config xmlns="http://xmlns.oracle.com/mds/config">
<persistence-config>
<metadata-namespaces>
<namespace metadata-store-usage="mstore-usage_1" path="/apps"/>
<namespace metadata-store-usage="mstore-usage_1" path="/deployed-composites"/>
<namespace metadata-store-usage="mstore-usage_1" path="/soa"/>
</metadata-namespaces>
<metadata-store-usages>
<metadata-store-usage id="mstore-usage_1">
<metadata-store class-name="oracle.mds.persistence.stores.db.DBMetadataStore">
<property value="DEV_MDS" name="jdbc-userid"/>
<property value="welcome1" name="jdbc-password"/>
<property value="jdbc:oracle:thin:@//localhost:1521/xe" name="jdbc-url"/>
<property value="soa-infra" name="partition-name"/>
</metadata-store>
</metadata-store-usage>
</metadata-store-usages>
</persistence-config>
</mds-config>
</adf-mds-config>
This is 11.1.1.4 Soa Suite.
Thanks and regards.
AnandI had a similar issue, but it was after my application was automatically converted by JDEV from 1.1.1.3.
Perhaps others have determined how to fix the application and projects after the conversion, but I recreated everything in 1.1.14 and this seems to work. -
I am getting the below error while bringing up the Process Scheduler error
Hello ,
I am getting the below error while bringing up the Prcs Scheduler.
Cannot open message catalog TMADMIN_CAT
Starting Process Scheduler Server PSNT for Database FSUAT ...
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 752; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
INFO: BEA Tuxedo, Version 8.1, 32-bit, Patch Level 192
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1571; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1570; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec BBL -A :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec PSDSTSRV -p 1,600:1,1 -sPostReport -- -C psprcs.cfg -CD FSUAT -PS PSNT -A s
tart -S PSDSTSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 1685; check TU
XDIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmboot: NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 827; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmshutdown -y
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 753; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 916; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 907; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 936; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 948; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 775; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
Please suggest.Duplicate thread :
Re: I am getting the attached error while bringing up the Prcs Scheduler
Nicolas. -
I am getting the attached error while bringing up the Prcs Scheduler
I am getting the attached error while bringing up the Prcs Scheduler:
Cannot open message catalog TMADMIN_CAT
Starting Process Scheduler Server PSNT for Database FSUAT ...
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 752; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
INFO: BEA Tuxedo, Version 8.1, 32-bit, Patch Level 192
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1571; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog LIBTUX_CAT, set 1, num 1570; check TUXDIR=C:\
bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 793; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec BBL -A :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 820; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 801; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
exec PSDSTSRV -p 1,600:1,1 -sPostReport -- -C psprcs.cfg -CD FSUAT -PS PSNT -A s
tart -S PSDSTSRV :
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 1685; check TU
XDIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmboot: NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 827; check TUX
DIR=C:\bea\Tuxedo8.1, LANG=English_United States.1252
tmshutdown -y
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 753; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 916; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 907; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 936; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 948; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
NLS:4: Cannot open message catalog CMDTUX_CAT, set 1, num 775; check TUXDIR=C:\b
ea\Tuxedo8.1, LANG=English_United States.1252
Please advise, thank youIs that ever running ? Where/how did you installed tuxedo ? Which OS user was used for tuxedo install ?
Nicolas. -
Error while exporting/transporting the Business system from Dev to Quality
Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
RameshGo through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful -
Hi All,
At the time of creating a travel request, I am getting the following error :
Error while writing to the database (PTRV_HEAD/PTRV_PERIO/Cluster TE)
Please advise how to resolve this issue.
Regards,
Rahulsuch problem occor when u have not defined the number range
Set Up Trip Number Ranges
if the problems remaines after defining number range...keep check all transaction there may two three more numbers ranges has to define..
this prblem is only due to number ranges not defined by you. -
I got the above error while i restore the standby database using RMAN backu
Dear All,
RMAN> crosscheck archivelog all;
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=14 devtype=DISK
specification does not match any archive log in the recovery catalogi got the above error while i restore the standby database using RMAN backup from production.
Help need.i take the backup without catalog database.
regards,
DBrman> list backup;
it shows lengthier but i showed only the corresponding
BS Key Type LV Size Device Type Elapsed Time Completion Time
3479 Full 17G DISK 01:29:42 09-FEB-13
BP Key: 3479 Status: AVAILABLE Tag: 09FEB13_FULL_ESMSRV1_DB
Piece Name: /oradatabkp/rman/esmsrv1_full_db_09feb13
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3479
File LV Type Ckp SCN Ckp Time Name
1 Full 1759250260 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759250260 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759250260 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759250260 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759250260 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759250260 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759250260 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759250260 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759250260 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759250260 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759250260 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759250260 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759250260 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3480 Full 17G DISK 01:21:30 09-FEB-13
BP Key: 3480 Status: EXPIRED Tag: TAG20130209T200021
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_full_Feb09
SPFILE Included: Modification time: 08-FEB-13
List of Datafiles in backup set 3480
File LV Type Ckp SCN Ckp Time Name
1 Full 1759422265 09-FEB-13 /esmsrv1/dbs/system01.dbf
2 Full 1759422265 09-FEB-13 /esmsrv1/dbs/undotbs01.dbf
3 Full 1759422265 09-FEB-13 /esmsrv1/dbs/cwmlite01.dbf
4 Full 1759422265 09-FEB-13 /esmsrv1/dbs/drsys01.dbf
5 Full 1759422265 09-FEB-13 /esmsrv1/dbs/example01.dbf
6 Full 1759422265 09-FEB-13 /esmsrv1/dbs/indx01.dbf
7 Full 1759422265 09-FEB-13 /esmsrv1/dbs/odm01.dbf
8 Full 1759422265 09-FEB-13 /esmsrv1/dbs/tools01.dbf
9 Full 1759422265 09-FEB-13 /esmsrv1/dbs/users01.dbf
10 Full 1759422265 09-FEB-13 /esmsrv1/dbs/xdb01.dbf
11 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_default_seg_001.dbf
12 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_ind_seg_001.dbf
13 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_property_seg_001.dbf
14 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_ind_seg_001.dbf
15 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_upload_seg_001.dbf
16 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_ind_seg_001.dbf
17 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_rate_seg_001.dbf
18 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_ind_seg_001.dbf
19 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_001.dbf
20 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_001.dbf
21 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_overflow_seg_002.dbf
22 Full 1759422265 09-FEB-13 /esmsrv1/dbs/dpipe_summary_seg_002.dbf
23 Full 1759422265 09-FEB-13 /esmsrv1/dbs/perfstat_001.dbf
39 Full 1759422265 09-FEB-13 /esmsrv1/dbs/oem_repository.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
3481 Full 4M DISK 00:00:03 09-FEB-13
BP Key: 3481 Status: AVAILABLE Tag: TAG20130209T212205
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_controlfile_copy_Feb09
Controlfile Included: Ckp SCN: 1759462488 Ckp time: 09-FEB-13
BS Key Type LV Size Device Type Elapsed Time Completion Time
3482 Full 0 DISK 00:00:01 09-FEB-13
BP Key: 3482 Status: AVAILABLE Tag: TAG20130209T212212
Piece Name: /oradatabkp/rman/esmsrv1/esmsrv1_spfile_copy_Feb09
SPFILE Included: Modification time: 08-FEB-13
ls -l /oradatabkp
root@drsrv1#ls -l /oradatabkp
total 1108672
drwxr-xr-x 2 ovsd dba 96 Sep 27 2009 alert_bkp
-rw-r--r-- 1 oracle dba 195 Mar 15 2007 create.sql
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 ctrl_bkp
-rw-r--r-- 1 root sys 565114880 Apr 24 2007 drsrv1.tar
drwxrwxrwx 2 root sys 96 Jun 17 2011 drsrv2-ignitebkp
drwxr-xr-x 4 root sys 96 Apr 24 2007 esmsrv1
-rw-r----- 1 root sys 1613824 Feb 22 2007 esmsrv1stby.ctl
-rw-r--r-- 1 esmsrv1 dba 5120 Dec 31 2009 esmtables.dmp
-rw-r--r-- 1 esmsrv1 dba 538 Dec 31 2009 esmtables.log
drwxrwxrwx 4 root sys 8192 Mar 10 2009 export
drwxr-xr-x 8 root sys 8192 Apr 24 2007 finalbackup
-rw-r--r-- 1 oracle dba 3820 Sep 5 2008 invalid.sql
-rw-r--r-- 1 esmsrv1 dba 303104 Dec 31 2009 kirdevports.dmp
-rw-r--r-- 1 esmsrv1 dba 591 Dec 31 2009 kirdevports.log
drwxr-xr-x 2 root root 96 Feb 12 2007 lost+found
-rw-r--r-- 1 oracle dba 24954 Aug 9 2009 ovcontrol-090909.ctl
drwxr-xr-x 22 root sys 8192 Apr 24 2007 ovpi
drwxr-xr-x 2 oracle dba 8192 Aug 7 2009 pfile_bkp
drwxrw-rw- 4 oracle dba 8192 Feb 10 15:25 rman
drwxr-xr-x 28 root sys 8192 Feb 1 17:15 schedbkp
drwxr-xr-x 2 oracle dba 8192 Jul 11 2011 sdnnm
-rw-r--r-- 1 esmsrv1 dba 2196 Dec 31 2009 srirdevports.log
drwxr-xr-x 2 oracle dba 96 Mar 13 2009 statsreport
-rw-r--r-- 1 oracle dba 966 Mar 15 2007 tbs.sql
drwxr-xr-x 5 oracle dba 96 Mar 16 2007 testov
drwxr-xr-x 2 root sys 442368 Mar 11 2009 trendadm_files
root@drsrv1#ls -l /oradatabkp/rman
total 37244448
drwxr-xr-x 2 oracle dba 8192 Feb 10 15:25 esmsrv1
-rw-r----- 1 oracle dba 19068198912 Feb 9 14:21 esmsrv1_full_db_09feb13
drwxrw-rw- 2 oracle dba 8192 Feb 9 21:36 openview
-rw-r--r-- 1 oracle dba 920442 Feb 9 21:37 rmanbkp-all.log -
Java.exe Error while running Tomcat
Hello,
I encountered a very strange Java.exe error while testing my servlet.
Here is the screen dump of the aforementioned error:
http://www.shelleysauction.com/db07-22-02.jpg . The error's message is
as follows: "There is no disk in the drive. Please insert a disk into
drive \Device\Harddisk1\DR1."
Would appreciate any help; I don't claim to be any good at this stuff.
All of the information on that page is derived from a database on a
remote intranet machine (including input type, title, descriptions,
etc.). I am not sure if it is a server-side error or a client-side
error as my computer is running the server; another computer is not
possible--I'm a lowly summer intern hired to build a servlet that
interfaces with a database, and I'm not a good programmer.
The only thing I can think of is that I recently began using the
com.oreilly.servlet.* package for its Base64Encoder, Base64Decoder, and
MultiPartRequest methods. That form was working fine for weeks before
then.
Jennica HumphreyHello all,
Thank you for your help. I was using the MultiPartRequest class in the com.oreilly.servlet.* package so I could add a "section" that allowed users to upload CSV files to the database. It required, I think, that an opening FORM tag would have the following attribute: enctype="multipart/form-data"
Now, I made a HtmlGenerator class that writes the HTML for me, with all sorts of methods like html.startTableCell( String stylesheet, String align, String valign, String width ) so I could just type html.startTableCell( "palepurple", "left", "top", "50%" ); ... made reading my own crap a lot easier.
Anyway, I had html.startForm( ) and html.startUploadForm( )... the only difference was that the upload one had the enctype="multipart/form-data" attribute and the first one didn't. Now, my DoPost() method was supposed to determine if there were "regular" parameters passed on by the form and if there were "MultiPart" parameters... with code like this:
// Initialize MultipartRequest. This is required for file uploading.
boolean isMulti = true;
MultipartRequest multi = null;
try {
multi = new MultipartRequest( request, "..\\..\\Files", 10 * 1024 * 1024 );
} catch( Exception e ) { isMulti = false; }
Enumeration paramNames = request.getParameterNames();
// Attempt to initialize parameter names.
try {
if ( !paramNames.hasMoreElements( ) ) paramNames = multi.getParameterNames();
} catch ( Exception e ) {
/* Ignore */
***code snipped out***
if ( isMulti )
paramValues = multi.getParameterValues( paramName );
else
paramValues = request.getParameterValues( paramName );This was working fine, but after submitting "regular" (not uploaded) forms 3 or 4 times, it'd give me that error. Then I decided to change html.startForm() to work exactly like html.startUploadForm()--in effect making every form a MultiPartRequest. It works fine, without any errors. Do you know what was going on?
Maybe you are looking for
-
I have made a simple DVD with one track, one menu and one button. When I put the burned DVD into the player the menu will not show up. It just skips straight to the one track. My "First Play" is definitely definiteley set to "Menu 1". Does anyone kno
-
MBPr+disconected external monitor= no auto graphics switching
Hello! I am having a problem with automatic graphics switching. Recently i updated OS X to Mavericks and noticed that my MBPr not going back to integrated GPU when I disconect my external monitor. In Activity Monitor all processes are not requiring H
-
Keeping a connection with HDMI thunderbolt and HD TV what settings in Preferences are needed?
-
Where can I locate a driver?
Where can I locate the driver and how do I install a driver for the HP color laser Jet CM2320fxi MFP?
-
IOSApp rejected: Error ITMS-9000 Invalid segment alignment
I am getting an error while trying to release the application for Apple App Store. Error ITMS-9000 Invalid segment alignment Following the process flow mentioned on the link below: http://www.raywenderlich.com/8045/how-to-submit-your-app-to-apple-fr