Applet does not start after JRE 1.5 installation

Hi,
When I go to my webpage where I have an applet that requires Java 1.5..the browsers are prompting for Java installation (ActiveX component install on IE or Firefox plugin for JRE installation). But once the Java install completes the applet does not start automatically. The same code used to work nicely with Java 1.4. The applet used to automatically start and run once the JRE install completed. But with JRE 1.5 it does not start. If I do a refresh on the browser it again prompts for java installation. If I open new browser window and go to the URL the applet starts. Please let me know how to get the applet to start automatically after JRE 1.5 installation.
Thanks,
Vijay

We figured out the problem. the CLASSID was not the right one. Once we changed it...its working fine.
Vijay

Similar Messages

  • Applet does not start after Java 1.5 installation

    Hi,
    When I go to my webpage where I have an applet that requires Java 1.5..the browsers are prompting for Java installation (ActiveX component install on IE or Firefox plugin for JRE installation). But once the Java install completes the applet does not start automatically. The same code used to work nicely with Java 1.4. The applet used to automatically start and run once the JRE install completed. But with JRE 1.5 it does not start. If I do a refresh on the browser it again prompts for java installation. If open new browser window and go to the URL the applet starts. Please let me know how to get the applet to start automatically after JRE 1.5 installation.
    Thanks,
    Vijay

    We figured out the problem. the CLASSID was not the right one. Once we changed it...its working fine.
    Vijay

  • HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

    My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

    "UPAD lite?"
    I expect that you mean some version of iPad.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • RAC does not start after trying to move storage

    Hello,
    We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
    RAC does not start after we reformated the storage to RAID 10.
    What we did:
    1) deleted the database
    2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
    3) on both nodes
    - recreated VotingDisk
    node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
    Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
    successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
    node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
    Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
    successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
    - tried to move OCR but was able only on one node:
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
    These return ok for both node1 and node2:
    node1:oracle$ cluvfy stage -post hwos -n node1
    node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
    Performing post-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "node1"
    Destination Node                      Reachable?
    node1                                 yes
    node2                                 yes
    Result: Node reachability check passed from node "node1".
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name                             Comment
    node2                                 passed
    node1                                 passed
    Result: User equivalence check passed for user "oracle".
    Checking Cluster manager integrity...
    Checking CSS daemon...
    Node Name                             Status
    node2                                 not running
    node1                                 not running
    Result: Daemon status check failed for "CSS daemon".
    Cluster manager integrity check failed.
    Checking cluster integrity...
    Cluster is divided into 2 partitions.
    Partition 1 consists of the following members:
    Node Name
    node1
    Partition 2 consists of the following members:
    Node Name
    node1
    node2
    Cluster integrity check failed. Cluster is divided into 2 partition(s).
    Checking OCR integrity...
    Checking the absence of a non-clustered configuration...
    WARNING:
    CSS is probably working with a non-clustered, local-only configuration on nodes:
    node1
    Verification will proceed with nodes:
    node2
    Uniqueness check for OCR device passed.
    Checking the version of OCR...
    OCR of correct Version "2" exists.
    Checking data integrity of OCR...
    Data integrity check for OCR passed.
    OCR integrity check failed.
    Checking CRS integrity...
    Checking daemon liveness...
    Check: Liveness for "CRS daemon"
    Node Name                             Running
    node2                                 no
    node1                                 yes
    Result: Liveness check failed for "CRS daemon".
    Checking daemon liveness...
    Check: Liveness for "CSS daemon"
    Node Name                             Running
    node2                                 no
    node1                                 no
    Result: Liveness check failed for "CSS daemon".
    Checking daemon liveness...
    Check: Liveness for "EVM daemon"
    Node Name                             Running
    node2                                 no
    node1                                 yes
    Result: Liveness check failed for "EVM daemon".
    Liveness of all the daemons
    Node Name     CRS daemon                CSS daemon                EVM daemon
    node2         no                        no                        no
    node1         yes                       no                        yes
    Checking CRS health...
    Check: Health of CRS
    Node Name                             CRS OK?
    node1                                 unknown
    Result: CRS health check failed.
    CRS integrity check failed.
    Post-check for cluster services setup was unsuccessful on all the nodes.
    Please help.

    Thanks for the answer.
    Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
    You can see that cluster is not healty from cluvfy output.
    When I tried to start crs whith crsctl start crs but:
    - on node2 none of the demons starts (CSS, CRS or EVM)
    - on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
    Problem 2: Cannot change OCR location
    node2:root$ cat /var/opt/oracle/ocr.loc
    +#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
    ocrconfig_loc=/dev/rdsk/c7t30d0s3
    local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
    PROT-1: Failed to initialize ocrconfig
    node1:root$ cat /var/opt/oracle/ocr.loc
    ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
    local_only=TRUE
    node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
    PROT-1: Failed to initialize ocrconfig
    Problem 3: On node 1 I wrongly issued a command
    node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Configuration for local CSS has been initialized
    Adding to inittab
    Startup will be queued to init within 30 seconds.
    Checking the status of new Oracle init process...
    Expecting the CRS daemons to be up within 600 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    Oracle CSS service would not start as installed
    Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

  • Game does not start after installing on mac pro

    Game does not start after new install on mac pro ?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My iPhone4 does not start after it was out of charge and recharged again?

    My iPhone 4 does not start after it was out of charge and recharged again?

    Hi Svedjot,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Cheers,
    Judy

  • 16 GB x-Fi Style - does not start after charging

    Hi,
    4 weeks ago I bought my x-Fi style and used it during my holidays for 2 weeks. After charging the player only twice (USB-connection with notebook), it now fails starting. Maybe there is an internal temperature fuse to protect from overheating and I only have to wait to try again? After connecting to USB the CREATIVE sign appears but disappears directly and a battery symbol appears and remains on the screen. After disconnecting the player does not react in any way. I already tried to reset but cannot start it again.
    Can anyone help me?
    Cheers,
    Uli

    Re: 6 GB x-Fi Style - does not start after charging:Just fyi
    I found the website for Creative to be very frustrating. Not one snail mail address or corporate headquarters info. The link for website feedback didn't work and one other customer service link was a dud. They clearly don't want to be 'bothered' with complaints, or anything positi've for that matter!
    But, I searched on the forum and found a three-year-old post about someone who was frustrated with having to carry around a paperclip to always push 'reset' on his X-Fi -- and the light dawned! Didn't know I had one of those. I pressed reset and voila! it is working again. Still had to charge it, but it accepted the charge this time and I was able to finish my book and move on to the next. Now, the next problem is I tried to access my wireless network which has a $ in the password and there is no $ in the choices for entering a password. So, now I have to change the password, change all of my device passwords (Blu-Ray, iPad, laptops(2), friend's laptops, etc. a huge pain. Seems to me they could have included a $ in the choices!

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • EXE DOES NOT START AFTER DOWNLOADING

    I downloaded lr 4.3 but double clicking it does not open the exe. When I double click older lr downloads they still open normally.Right clicking and open does not work either. What to do?

    Windows Vista Home Premium 6.0.6002 SP2 Build 6002, Intel Core 2 Quad
    Q9300 2.5GHz. When I double click the download, the arrow starts rotaing
    for about 30 seconds and then disappears without any new window opening
    Op 17/12/2012 23:55, Jeff A Wright schreef:
    >
          Re: EXE DOES NOT START AFTER DOWNLOADING
    created by Jeff A Wright
    <http://forums.adobe.com/people/JeffAWright> in /Downloading,
    Installing, Setting Up/ - View the full discussion
    <http://forums.adobe.com/message/4928607#4928607

  • The Connection Server does not start after an upgrade to BO4.1 SP3

    Hello guys,
    The Connection Server does not start after an upgrade to BO4.1 SP3
    We are in process to upgrade our Business Objects environments to BO4.1 SP3
    The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
    When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
    Our OS is AIX
    Uncaught Exception in SilentScope: [CS] Ser
    verInitialization::InitManager::Initialize: 0.007^^
    The CS initialization failed within the CS server. Aborting
    trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
    Gerd

    Hi Amine
    The File seems ok
    File from the failing connection server
    -rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
    File from our test system
    -rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
    I created a new connectieserver(by the copy function), but the new server won't start.
    Regards
    Gerd
    Log
    |89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
    init_srv.cpp:95:-: TraceLog message 3
    |4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
    |77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting.

  • Time Machine does not start after external hard drive is connected

    Time Machine does not start after external hard drive is connected

    These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
    Also bear in mind that:
    1. restoring data over icloud takes time
    2. iCloud is not designed as a replacement to Time Machine.

  • GANTT applet does not start

    Hi,
    the GANTT diagram does not start in cprojects. I have already implemented the newest version of oss note 1035436 from today.
    The exact error message is:
    Java Plug-in 1.6.0_03
    Verwendung der JRE-Version 1.6.0_03 Java HotSpot(TM) Client VM
    Laden: Klasse com.sap.tc.webdynpro.ace.AcfApplet nicht gefunden
    java.lang.ClassNotFoundException: com.sap.tc.webdynpro.ace.AcfApplet
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadCode(Unknown Source)
         at sun.applet.AppletPanel.createApplet(Unknown Source)
         at sun.plugin.AppletViewer.createApplet(Unknown Source)
         at sun.applet.AppletPanel.runLoader(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
    Does have anyone any idea?
    Thanks for your help!
    best regards
    Christine

    Hi Peter,
    While offshore user acessing the Gantt Chart he is getting class not found Exception error.
    Currenlty his JRE version is 1.7and SAP 7.4 Release.
    In the console the error is
    cache: Initialize resource manager: [email protected]
    basic: Added progress listener: [email protected]
    security: Expected Main URL: null
    java.lang.ClassNotFoundException: com.sap.tc.webdynpro.ace.AcfApplet
    at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
    at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
    at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
    at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
    at sun.plugin2.applet.Plugin2Manager.initAppletAdapter(Unknown Source)
    at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    basic: load: class com.sap.tc.webdynpro.ace.AcfApplet not found.
    java.lang.ClassNotFoundException: com.sap.tc.webdynpro.ace.AcfApplet
    at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
    at sun.plugin2.applet.Plugin2ClassLoader.loadClass0(Unknown Source)
    at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
    at sun.plugin2.applet.Plugin2ClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
    at sun.plugin2.applet.Plugin2Manager.initAppletAdapter(Unknown Source)
    at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    basic: Removed progress listener: [email protected]
    security: Reset deny session certificate store
    It is replicated for most of the offshore users.
    Regards,
    Ravi.

  • WebAnalysis does not start after workspace is set on Windows Authentication

    I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
    [WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
    I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
    As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
    It drives me crazy.
    Hopefully its a small matter for you to solve!
    Thanks in advance.

    Dont know exactly whats happened but I presume something went wrong during the update procedure.
    If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working!

  • Applet does not work after conversion

    Hi,
    A have an html page on with a use an applet. The applet is downloaded in two cab files for the internet explorer.
    The applet and the download works fine without the java plugin.
    When I convert this page to using the html converter the applet does not work
    The error is
    java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
         at sun.applet.AppletClassLoader.getBytes(Unknown Source)
         at sun.applet.AppletClassLoader.access$100(Unknown Source)
         at sun.applet.AppletClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.applet.AppletClassLoader.findClass(Unknown Source)
         at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.applet.AppletClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Unknown Source)
         at oracle.forms.handler.UICommon.instantiate(Unknown Source)
         at oracle.forms.handler.UICommon.onCreate(Unknown Source)
         at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
         at oracle.forms.engine.Runform.onCreateHandler(Unknown Source)
         at oracle.forms.engine.Runform.processMessage(Unknown Source)
         at oracle.forms.engine.Runform.processSet(Unknown Source)
         at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
         at oracle.forms.engine.Runform.onMessage(Unknown Source)
         at oracle.forms.engine.Runform.sendInitialMessage(Unknown Source)
         at oracle.forms.engine.Runform.startRunform(Unknown Source)
         at oracle.forms.engine.Main.createRunform(Unknown Source)
         at oracle.forms.engine.Main.start(Unknown Source)
         at sun.applet.AppletPanel.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    I think he fails on the downlad of the second cab file....
    Sombody any ideas,
    Thank
    Tom Van de Velde

    I recently moved to programming applets and this problem gave me many
    headaches. I know that the java compiler is supposed to compile with an
    appropriate version, but I suspect that there may be a few flaws in the
    system.
    Try compiling with a command like this to force a 1.1 compilation:
    "javac -target 1.1 yourfile.java"
    This enabled my applets to load in Netscape 4.6, something they wouldn't do before.
    Installing the java plugin seems to fix the problem on other browsers. This might
    be a new bug introduced by Java 1.4, since I had very few problems with
    Java 1.3...I dunno...that's speculation...

  • Premiere Elements 12 does not start after error message: display driver is incompatible

    After successful installation and starting Premiere Elements the following error message appears: "Uncompatible display driver identified. Update the display driver for a better and faster playback performance!" Hopefully my translation from German is helpful enough. I confirmed with OK but unfortunately Premiere Elements does not start. I checked the display driver: it is the most actual one: AMD Radeon HD 7610M. Furthermore the hardware should be OK as well: ASUStek with an Intel Core i5-2450M CPU @2.5 GHz; 6 GB RAM; 64 Bit Windows 7 Service Pack 1. What can I do?

    Moonkeys25
    Recap...please confirm that as of this date, the problem exists with or without the antivirus and firewall(s) disabled.
    Moving forward...
    If you issue was specific to the display card error that you have been getting then probable conclusions
    a. the ADM Radeon H7610M driver version is not up to date
    or
    b. the ADM Radeon H7610 M video card/graphics card installed as is is not compatible with Premiere Elements 12 on your Windows 7 SP1 64 bit
    The updated driver version and the BadDrivers.txt file deletion should have corrected the problem unless there is a gross mismatch between Premiere Elements 12 and ADM Radeon H7610M.
    Did you use the link that John posted to get the auto detection of the latest driver version for the ADM card?
    If we have gone as far as we can with the card and its driver version angle on this, then we can try the generalized troubleshooting drills with no guarantees, just hopes
    1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    12.0
    and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. You just need to make sure to have the computer's Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
    2. If "1" has no effect on the issue...uninstall, ccleaner run through time, reinstall with antivirus and firewalls turned off.
    a. Control Panel/Program, select Adobe Premiere Elements 12, right click the entry and click on the Uninstall pop up. Then follow the instructions for the uninstall.
    b. Download and install the free ccleaner for a computer run through to get rid of leftovers from incomplete uninstalls and installs.
    https://www.piriform.com/ccleaner/download
    When you are ready for this step, I will give you a step by step through the ccleaner (regular cleaning part and registry cleaning part).
    c. Reinstall from your installation files or installation disc, with antivirus and firewall(s) disabled.
    Please review above and then let me know if I have interpreted correctly where we are in the troubleshooting. Do not start the above plan until we are in agreement on the details and hoped for results.
    Thanks.
    ATR

Maybe you are looking for

  • How I can create a new page layout template for EP 7.0

    Where I can found tutorial or description. I have already provided the par-file for new page layout but I do not know like I should integrate in the enterprise portal 7.0. Greeting Daniela

  • 8 GB RAM for Mac Mini Mid-2011?

    I am looking for the correct version to install in my Mac Mini 2011. I found http://www.amazon.com/Crucial-PC3-10600-SODIMM-204-Pin-CT2C4G3S1339M/dp/B008LTBI T4/ is that the correct version that is compatable with my device?

  • I am stuck in a loop of "sign in to icloud" box

    I have a new I pad Mini, and can't use any of its function because as soon as i enter my password it goes to a box labled "sign in to ICloud" and even though i chaged my password and got an apple confirmation it doesn't like tthe password and the min

  • Receiver Determination Enhancement

    what is Receiver Determination Enhancement? how will i use it?

  • IMovie HD and FCE 4: video quality difference?

    Hello, I imported 20+ hours of video and organized it in FCE4. However, as a novice amateur video artist, I find it far easier to work in the older iMovie HD than FCE4. Do you lose video quality in any way by working in this simpler application? iMov