Applet freezes requesting which cert should use for a SSL connection

Hello everyone,
I have a strange problem. Applet freezes when it request which certificate should it use to connect to the server through a SSL connection. It works fine if it does not show the "choose certificate" window.
I can not give more clues, but I am quite desperated and I hope you can help.

Similar Messages

Which cable should use for Sony DV connect to iMac ?

Which cable should use for Sony DV(IEEE 1394)connect to iMac ?

If your iMac has just the FireWire 800 connection, you will need the 9 pin to 4 pin cable.
http://www.cwol.com/firewire/firewire-800-1394b-cables.htm
If your iMac has the FireWire 400 connection, you will need the 6 pin to 4 pin cable.
http://www.radtech.us/Products/ProCableFW400800.aspx
Links are to illustrate examples. You should be able to pick them up at most computer stores.

How to specify which cert to use for software virt server?

Is there a way to specify which certificate to use for each software virtual server? So, for example a user hitting https://somewhere.com would get the certificate for somewhere.com while the virtual server https://somewhereelse.com would use the certifcate with the name somewhereelse.com in it?

No, this is not possible due to limitations of the underlying protocols.
HTTP requests are sent over TCP connections which deal with IP addresses and port numbers (i.e. hardware virtual server properties), not hostnames (i.e. software virtual server properties). The HTTP protocol adds software virtual server support by allowing a client to identify the hostname (e.g. "www.iplanet.com") of the server it wishes to communicate with. This is achieved by including a "Host:" header with each HTTP request.
Unfortunately, the SSL/TLS protocols require that the web server present its SSL/TLS certificate BEFORE the client sends its HTTP request. Since the software virtual server information is contained in the HTTP request, it is not possible for the server to select different certificates for different software virtual servers.
You will need to use hardware virtual servers (i.e. virtual servers that have different IP addresses and/or port numbers) if you wish to use distinct SSL/TLS certificates.

Which protocol we should use for file transfer in ios ?

which protocol we should use for file transfer in ios ?

My friend that's definitively a Lotus Domino question, you'll probably ask in the Domino's forums if it generates wsdl, or simple http services you're ready to consume those services in Flex.

Which Event Classes i should use for finding good indexs and statistics for queries in SP.

Dear all,
I am trying to use pro filer to create a trace,so that it can be used as workload in
"Database Engine Tuning Advisor" for optimization of one stored procedure.
Please tel me about the Event classes which i should use in trace.
The stored proc contains three insert queries which insert data into a table variable,
Finally a select query is used on same table variable with one union of the same table variable, to generate a sequence for records based on certain condition of few columns.
There are three cases where i am using the above structure of the SP, so there are three SPS out of three , i will chose one based on their performance.
1) There is only one table with three inserts which gets into a table variable with a final sequence creation block.
2) There are 15 tables with 45 inserts , which gets into a tabel variable with a final
sequence creation block.
3)
There are 3 tables with 9 inserts , which gets into a table variable with a final
sequence creation block.
In all the above case number of record will be around 5 lacks.
Purpose is optimization of queries in SP
like which Event Classes i should use for finding good indexs and statistics for queries in SP.
yours sincerely

"Database Engine Tuning Advisor" for optimization of one stored procedure.
Please tel me about the Event classes which i should use in trace.
You can use the "Tuning" template to capture the workload to a trace file that can be used by the DETA. See
http://technet.microsoft.com/en-us/library/ms190957(v=sql.105).aspx
If you are capturing the workload of a production server, I suggest you not do that directly from Profiler as that can impact server performance. Instead, start/stop the Profiler Tuning template against a test server and then script the trace
definition (File-->Export-->Script Trace Definition). You can then customize the script (e.g. file name) and run the script against the prod server to capture the workload to the specified file. Stop and remove the trace after the workload
is captured with sp_trace_setstatus:
DECLARE @TraceID int = <trace id returned by the trace create script>
EXEC sp_trace_setstatus @TraceID, 0; --stop trace
EXEC sp_trace_setstatus @TraceID, 2; --remove trace definition
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Which method is used for event creation

Dear All,
My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.
I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
Can some one guide me, how can I found that which method is used for event creation in different pur org?
How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation.
For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module' for all the workflow - WS92000030, WS92000021 etc.
Thanks in

Hi Sahu,
I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
Istead what i think is, they might have given the Event Condition for each workflow.
In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
Please check this.
Regards,
Gautham

Brand new user I have plugged in my external Hard which I was using for my windows laptop into my IMAC and it now appears I have lost all of my files is there any way I can recover these ?

Brand new user I have plugged in my external Hard which I was using for my windows laptop into my IMAC and it now appears I have lost all of my files is there any way I can recover these I didn't know that you should reformat

only if you have a backup can you recover

What format i should use for my external hard drive that can be used interchangeably between mac and pc?

What format i should use for my external hard drive that can be used interchangeably between mac and pc?

Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
One option is MacDrive for you PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/
More options...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930

Which CKM is used for moving data from Oracle to delimited file ?

Hi All
Please let me know Which CKM is used for moving data from Oracle to delimited file ?
Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?

Addy,
A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
HTH

After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

I'm using two displays and several desktops on my Mac (OS X 10.9.4).
When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

Hi Nerva,
Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

HT1918 I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png ‏5 KB
averages of 10.vi ‏9 KB

I have a Comcast system and am going through a Bose amp for sound. The comcast box has an HDMI port which I've used for the Apple TV connection. Nothing works! Help.

have a Comcast system and am going through a Bose amp for sound. The comcast box has an HDMI port which I've used for the Apple TV connection. Nothing works! Help.

Thanks. Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....

Mackeeper popped up on my screen. Is this something I should use for my 5 year ould MacBook?

MacKeeper popped up on my screen. Is this something I should used for my 5 year ols MacBook?

See below.
https://discussions.apple.com/docs/DOC-3036

Which function is used for adding days to given month

which function is used for adding days to given month

Hi Jagrut,
Good ... Check out the following examples
Get a date
DATE_GET_WEEK Returns week for a date
WEEK_GET_FIRST_DAY Returns first day for a week
RP_LAST_DAY_OF_MONTHS Returns last day of month
FIRST_DAY_IN_PERIOD_GET Get first day of a period
LAST_DAY_IN_PERIOD_GET Get last day of a period
RP_LAST_DAY_OF_MONTHS Determine last day of month
Date calculations
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_IN_FUTURE Calculate a date N days in the future.
RP_CALC_DATE_IN_INTERVAL Add days/months to a date
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
DATE_CREATE Calculates a date from the input parameters:
Example: DATE_CREATE
CALL FUNCTION 'DATE_CREATE'
EXPORTING
 anzahl_jahre = 1
 anzahl_monate = 2
 anzahl_tage = 3
 datum_ein = '20010101'
IMPORTING
 datum_aus = l_new_date.
 Result:
 l_new_date = 20020304
Example: MONTH_PLUS_DETERMINE
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.
Hollidays
HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the
date is a holiday by checking the parameter HOLIDAY_FOUND.
Example: HOLIDAY_CHECK_AND_GET_INFO
data: ld_date like scal-datum default sy-datum,
 lc_holiday_cal_id like scal-hcalid default 'CA',
 ltab_holiday_attributes like thol occurs 0 with header line,
 lc_holiday_found like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
 date = ld_date
 holiday_calendar_id = lc_holiday_cal_id
 WITH_HOLIDAY_ATTRIBUTES = 'X'
IMPORTING
 HOLIDAY_FOUND = lc_holiday_found
tables
 holiday_attributes = ltab_holiday_attributes
EXCEPTIONS
 CALENDAR_BUFFER_NOT_LOADABLE = 1
 DATE_AFTER_RANGE = 2
 DATE_BEFORE_RANGE = 3
 DATE_INVALID = 4
 HOLIDAY_CALENDAR_ID_MISSING = 5
 HOLIDAY_CALENDAR_NOT_FOUND = 6
 OTHERS = 7.
if sy-subrc = 0 and
 lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
Checking dates
DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
Converting dates
DATE_CONV_EXT_TO_INT Conversion of dates to SAP internal format e.g. '28.03.2000' -> 20000328 Can also be used to check if a date is valid ( sy-subrc <> 0 )
Function to return literal for month
he table you want to use is T247. You can also use the function MONTH_NAMES_GET.
You can also try table T015M. It has the month number in it's key.
Formatting
DATUMSAUFBEREITUNG Format date as the user settings
Other
MONTH_NAMES_GET It returns all the month and names in repective language.
Good Luck and thanks
AK

Is there a custom function available which can be used for logging errors captured in a sp in a sql table

Is there a custom function available which can be used for logging errors captured in a sp during and after execution in a sql table?
Basically we would like to utilize such function in every sp and log errors of each sp in a error log table
Mudassar

Thanks .
I was able to write this however I am thinking I am missing something
CREATE FUNCTION testfunction1()
RETURNS @temp_error TABLE (
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
AS
BEGIN
insert @temp_error(procedure_name,line_number,error_number,error_message,error_state,error_severity)
select error_procedure(),error_line(),error_number(),error_message(),error_state(),error_severity()
RETURN;
END;
CREATE TYPE test_type AS TABLE(
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
GO
create proc usp_error_test
@test_type AS test_type READONLY
as
begin
begin try
select 1/0
end try
begin catch
select * from testfunction1(@test_type)
end catch
end
Mudassar

Applet freezes requesting which cert should use for a SSL connection

Similar Messages

Maybe you are looking for