Applet Java_Report_Panel Notinited Error in Business Objects XIR2 Webi

Hi,
I am facing a error Applet Java_Report_Panel Notinited when I want to create or edit a Web Intelligence report.
The Current version of BO is XIR2.
The version of Java installed on my machine is 1.6.0.
Whenever, I try to create or modify a new report through Infoview, I get a blank Page and at the bottom of the Infoview, it displays
Java Report Panel Notinited.
This was working fine till yesterday. There were no changes or updates done on the machine.
Just for reference, the reports work fine, when I use the other panels such as the Query-HTML and HTML Report Panel.
I had enabled all the required options in the Internet Explorer. but still, I face the Issue.
Let me know what has to be done in resolving the same.

bouser39:
This was working fine till yesterday. There were no changes or updates done on the machine
Are you absolutely sure about no changes applied? I.e. you solely are the administrator, and you have sole access to this server in regards to administration, loading patches, or other configurations? The "no init" I ran into a couple of years back and the cause was our web admin wanted to make a shorter URL appear in the address bar (something like ACME.com/BO) versus ACME.com/businessobjects/enterprise115/infoview, so he built a "virtual" web folder and had it say "BO". Well, everything worked fine in Infoview, logging in, running reports, etc, etc, however, after loading a particular service pack, and then when we went to build a new web intelligence document the whole house of cards came toppling down. Long story short, we had to forego the "BO" short name and revert back to the long URL, as ugly as it appeared, the previous method of "BO" was not longer applicable with the new "java bridge" that Business Objects had implemented with their new service pack. So, perhaps someone tried to make things more efficient for you, but in the long run actually broke a few things along the way....
Thanks,
John

Similar Messages

Headings and commands duplicated in Business Objects XIR2

Post Author: Jon Webb
CA Forum: .NET
My headings and commands keep getting duplicated in Business Object XIR2 for Visual Studio 2005. It's hard to take a picture because screen capture closes the menu, but right now I have two "Crystal Reports" menus listed in the Visual Studio 2005 main menu. Each of these menus has four insert items, with similar duplication for the other items, and the inset menus have similar duplicates. I think all this duplication is eating up memory in Visual Studio because I keep getting out of memory messages even though I have a lot of RAM and a large page file. Any idea what is going on here? How can I reset the menus back to their original state without manually editing them?

Post Author: andrewn
CA Forum: .NET
Are there any other options? Did that process fix the issue? I hate to go through all of that to have the same problem. It seems like there should be an easier/faster way. Thanks,Andrew

Scheduling Options(CMC)/ Business Objects Xir2

Environment spec:
Aix 5.3
Business Objects Xir2
Crystal reports Xi
DB2
Tomcat
Whilst scheduling a report from the CMC, there is a 'Schedule For' tab
I am trying to determine how this option works, whilst scheduling for a selected group/users.
I have reviewed the relevant documentation in the Business Objects Administrators guides in reference to this including Xi, XiR2 and XiR3/3.1.
There is no clear definition.
I asked this question, as we are trying to determine if whilst using this option does BO execute the query and then filter data according to each group/user OR execute the query for each specific user/group. If the latter is the case then this will have a big impact on our environment resources.
unfortunately we have reach EOL for Business Objects XiR2 so tech support will no longer advise us.
If anyone can provide us with any insight or direction this will be greatly appreciated
Many thanks

HI,
Option u2018Schedule foru2019 is generally used when you want schedule the reports on behalf of other users such that when underlying queries hit the database, they use the useru2019s id and pull the data based on his authorization over the data.
With SAP BW as backend, the impact can easily be seen where a report will show different dataset if run for two different sap user who different data access. Same should be the case with other databases as well.
Thanks,

Business Objects XIR2 Materials

Hi,I'm new to this forum and Business Objects XIR2. Can any one provide XIR2 material. It will be helpful for me.Thanks,Gopinath.

Hi GopinathWhat kind of content are you looking for?You can find the developer library for all XI code documentation at:http://devlibrary.businessobjects.com/ You can also find more documentation at:http://support.businessobjects.com/documentation/default.aspDoes this help? Rob Hornehttp://diamond.businessobjects.com/blog/10

We have to upgrade IE9 to IE11 (Internet Explorer ) for Business Objects XIR2 environment

Hi Experts,
We are currently using Business Objects XIR2 Infoview link in Internet Explorer 9 version. Now my client wants to upgrade IE9 to IE11.
Is it compatibility to Business Objects XIR2
Please let me know if we have any issue for upgrade to IE11 .
Thanks,
Veera

XIR2 is not compatible with IE11 at all. You're user will see all sorts of possible issues. Or no issues at all.
XIR2 is no longer supported by SAP (several years now) so no testing or patching been done to make XIR2 compatible.

Unicode error in business object ECC6

Hi all,
We upgraded from 4.6c to ECC6.
While executing a business object we got the syntax following error in ECC6.
The program "Z_2005PP" is not Unicode-compatible, according to its program attributes
We dont know how to solve it, becauseZ_2005PP is a business object.
How to solve this issue?
Regards,
Kumar.

You can unicode enable the Business Objects programs by following steps :
1)     Execute PROG u2018SWO_SET_UC_FLAGu2019
2)     Provide object type.( In your case Z_2005PP )
3)     Execute.
4)     Result
This should resolve the error.
Regards,
Vasuki

Business Objects XIR2 Infoview login issue

Hello -
I have a typical issue with BO Infoview login screen where the system name is showing incorrectly. The value should be coming from the configuration from web.xml file but it shows a totally different name with no option to update it. I checked the windows registry and system valiarbles but I haven't found anywhere on the system. Any ideas where this value is coming from ? Thanks.

Thanks Denis. I see that the login issue has been resolved, but I noticed a different error when I login and logout from CMC. Here's the error message... not sure if this is connected to the previous one.
D:\Program Files\Business Objects\Tomcat\work\Catalina\localhost\jsfadmin\org\apache\jsp\adminPages\Common\PreLogoff_jsp.java:78: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier
(try -source 1.4 or lower to use 'enum' as an identifier)
while (enum.hasMoreElements()) {
^
An error occurred at line: 17 in the jsp file: /adminPages/Common/PreLogoff.jsp
Generated servlet error:

Error in Business object BUS2012

Hi Friends..
If I am Going to run Standard Business object BUS2012 its working fine in local system but it was not working client system. It shows the error message like this..
"Basic idoc type PORDCR02 is not found"
so how can i solve this issue...
Thanks
Gowrishankar

Hi ..
Thanks for your reply..
Both client and local system are same version..
I think in the client system BUS2012 the idoc type prodcr02 is missing so how can i create the particular idoc for client system busines object
BUS2012.
Thanks
Gowrishankar

Error in Business Object bus2000126

Hello all,
i have given a workflow issue, in customer interaction center.
The issue is " When A OS Tech support case is created in business activity ( crmd_bus2000126 ), the case is open, and this case is assingned to a person ( field-assigned to) and if that person is not taking any action in that case for 4 hrs a notification(via email) has to send to his HR Manager and this continues for every 24hrs till the status not open (ie any other status ).
Business object - bus2000126
Delegated object - zbu2000126
For this case i am creating a fuction module to find the HR managers mail id and i am calling this function module in a method.
Error:
When i try to release the method, it said release the higher level first, so i tried to release the business object ( zbu2000126 ) but it says " SET THE STATUS FOR SUPERTYPE FIRST ".
Can any one help me on this issue.
Note: the subtype is created in one request.
the method that i want to create is in other request.
Thanks in advance

copy the code of the method, delete the method. save and generate...
then again create the method by copying the code.
sometimes it happens with no reason... may be a bug.(My trainer from SAP told me this...)
This will solve your problem first..
Another thumb rule is that object status shud be atleast implemented before releasing the method.
Based on the last error message better do the following, check the status of supertype BUS2000126. Make it to relesed if necessary.
Your problem will be solved.
Regards,
Sandeep Josyula
Reward Points if your problem solved by this..

Brand New Installation of Business Objects XIr2 Application Server

Hello,
We have recently acquired Business Objects XI r2 as we are in the process of migrating from Business Objects 6.5.1
We currently use BO 6.5.1 on a small scale using Business Query via excel to access a remote Data Warehouse. I beleive we will now use Live Office in the new XI world.
We have acquired licenses for the following components, and I really would like some assistance on how to install them and in which order
Business Objects Enterprise Professional
Business Objects Live Office
Business Objects Web Intelligence
I have a windows 2003 server in place to host the application, but where do I start ? Which component do I need to install first ?
Many thanks
Gary
EDX London Limited
10 Paternoster Square
London
EC4M 7LS

Hmm, this is Redhat Enterprise Linux Server release 5.4 - it's basically a 'snapshot' of our existing dev system.
One thing I have seen elsewhere is a problem with the libstdc++ compatability library, but it looks like that's installed (we tried tossing in a copy we had from CentOS, and got:
[root@bos-rep-bob01 ~]# rpm -ivh ./compat-libstdc++-33-3.2.3-47.3.i386.rpm
warning: ./compat-libstdc++-33-3.2.3-47.3.i386.rpm: Header V3 DSA signature: NOKEY, key ID 443e1821
Preparing...                ########################################### [100%]
        package compat-libstdc++-33-3.2.3-61.x86_64 (which is newer than compat-libstdc++-33-3.2.3-47.3.i386) is already installed
        package compat-libstdc++-33-3.2.3-61.i386 (which is newer than compat-libstdc++-33-3.2.3-47.3.i386) is already installed
        file /usr/lib/libstdc++.so.5.0.7 from install of compat-libstdc++-33-3.2.3-47.3.i386 conflicts with file from package compat-libstdc++-33-3.2.3-61.i386
So it's installed, and pretty up to date.

Display of messages from R3 Business Objects in Web Dynpro

Hi,
Please let me know how to display the messages that are given by the R3 Business Objects(BOs) in the WebDynpro view.
Example : Suppose I save a record using the GCP APIs and need to display the message "Save successful/save aborted due to...." given by BO in the view.
Awaiting your kind response.
Regards,
Mahesh

Hi Anil,
The method you suggested displays the string that I enter in my code (man.reportsuccess"...").
But what I want is to just display the text that I get from the backend and not the string I write in code.
The question is...how to access this backend BO messages??
Regards,
Mahesh

Exposing Business Object as Web Service

Hi,
I've designed a Business Object and would like to expose its findAll Operation as a web service. The wizard tells that the operation has Improper operation message cardinality". While browsing through saphelp I found this: http://help.sap.com/saphelp_nwce10/helpdata/en/44/24128b347c1c9fe10000000a11466f/content.htm
Thats nice to know but doesn't solve my problem. How do I create a web service that returns ALL objects?
Thanks in advance for your help.
Bastian
edit:
this on solved it:
CE/CAF: Expose service as Webservice

Hi,
you need to create wrapper method of findAll,
The reason you are not able to expose it as service because findAll resturning array of values instead of one response (or candinality of return is 0..n). So create one wrapper complex type add your BO as datatype of that complex type with multiple cardinality,
In new method add this complex type as response (with cardinality 0..1) and within code call standard findAll and mapp return value to complext type.
It will work.
Regards,
Gourav

MDM OR BUSINESS OBJECTS OR WEB DYNPRO or SOLUTION MANAGER

gurus can anyone tell me is it helpful to learn MDM or BO or WEB DYNPRO or SOLUTION MANAGER for crm consultants? To what extent this technologies are useful for crm consultants.

Hi Shiva,
What kind of SAP CRM Consultant Role you are referring to ? Is it Functional Consultant, Technical Consultant or a Techno Functional Consultant ?
For a Functional Consultant - SAP Solution Manager and Business Objects makes more sense, while the a basic understanding of Technologies like (Web Dynpro ) is also required.
For Techno Functional Consultant - Web Dynpro understanding is very important followed by MDM, Business Objects and Solution Manager.
Hope this has cleared your doubts and thrown some lights on your question.
Hope this helps.
Thanks,
Samantak.

Unicode error : Error in business object in transaction"SWO1'. RETURN VALUE

Hi ,
in an upgrade situation a Object Z00MARA is showing an error stating
"RETURN" is an ABAP key word and cannot be redefined as a DEFINE macro . . . .
the statement look like
DEFINE RETURN.
Thanks
richard

Hi,
I think RETURN is a key word we can not change it
please change it to d_return or something
Regards
Shiva

Runtime Error '109' - Business Object 6.5 - VBA macro

I am getting the same Runtime error '109' when trying to run my old reports(6.5) which have VBA Macros with the new XI 3.1 DeskI. Here's what I did:
1) Installed BO XI 3.1 client Tools on a machine which has BO 6.5 client tools
2) Opened the .rep in the XI 3.1 DeskI. CLick OK when it warns you that it is a earlier version and If you want to convert to new version.
Then when i try to run the report i get this error. The same .rep runs just fine with 6.5 Full Client.
Any Ideas guys? Am I missing any references or something ?
Thanks
Edited by: Larry Sherman on Aug 14, 2009 8:28 PM

Larry, I have seen some instances of VBA code not running in the new Deski version, possibly some calls are different. You will want to open an SAP incident for eng. to take a look at the VBA code.

Applet Java_Report_Panel Notinited Error in Business Objects XIR2 Webi

Similar Messages

Maybe you are looking for