Applets stopped showing after reinstallation
I noticed recently my browsers stopped showing applets. IE, Firefox, Opera don't show any applets anymore.
I have been doing a lot of reinstallation recently.
Now I have J2EE in C:\Sun\AppServer with JDK in C:\Sun\AppServer\jdk and JRE in C:\Sun\AppServer\jdk\jre.
I can view applets with appletviewer, but my browsers just display an empty image.
Can anyone offer any help?
In the tools - Internet Options-Advanced of the browser (IE), check whether proper selection is made for the applet
Similar Messages
-
Acrobat stops showing after 5 seconds.
Our version of arobat reader stops showing after 5 seconds when we open an element on our company website.
Is it the software that is the problem or the element on the website.
Below is our website: If you go to it and click on the link "100% recycled", a pdf opens up. On our computer it stops working after 5 seconds or so.
http://www.ecorubbishclearance.co.uk/Pages/Mattress_Disposal_London.aspx
Can anyone tell me if the same thing happened to you when you clicked it.
Thanks in advance,
Simon HarrisI have no problem viewing that online PDF for as long as I like.
What is your operating system? Browser? Reader version? -
AirTunes stops streaming after each song but iTunes shows it playing
I've read through a lot of posts and either people are having the same issue just describing them differently or I'm seeing an entirely different issue.
My setup is Windows Vista running iTunes 8, Airport Express and an iPod Touch running the Remote app. I just bought it all yesterday and did all the firmware and software updates it asked me to when setting it all up.
I had it setup wirelessly and working -- the remote controlled iTunes which send audio to my AE and it worked beautifully. Then I realized the music stopped, I went to check and iTunes still showed the music playing, but no sound was coming out of the remote speakers. If I change the speaker output to computer then back to the remote speakers it starts playing again.
I've disabled wireless on the AE and put a long wire across to rule out wirless interference or problems. I've disabled the Windows Vista firewall as well.
I've tested both from the remote and from using iTunes directly. So I've ruled out the Remote App from the equation (I think). I say that, because first thing this morning I ran using just iTunes and it worked for 15 straight songs. I used the remote to change albums and start another and after the first song played it went silent. I noticed in iTunes a playlist called "Remote" comes up so I was thinking the Remote was causing it. I switched over to my library local on iTunes again removing the remote and it keeps happening anyway. So I'm not sure if by using the remote I put it in this "state" or if it's really not the Remotes problem.
OK, so once it happens, it stops streaming after very single song however iTunes still shows it's playing fine. To fix, turn the speaker off then on again or switch to computer then back to remote again. It works doing this via the Remote App or on iTunes directly.
This is FRUSTRATING! I spent a lot of money on the iPod, AE and getting a cheap stereo receiver/amp to feed my in-house speakers and now it's pretty much not even useful.
Suggestions? Help? Anything?
Message was edited by: TimLindnerI wanted to post a follow-up. I solved my own issue after starting to rule out every possible cause.
I have a Western Digital networked hard drive (NAS) which houses all of my MP3's. I knew accessing this drive was pretty slow but I've had my MP3's on it and iTunes' library is all coming off this drive. It has worked fine on my computer for years. However, it appears that the lag doesn't play nice with AirTunes.
I moved my entire iTunes library (about 80 GB) to my local machine's hard drive, rebuilt my library and now it plays flawlessly!
Just so people know, I've updated firmware on the AirportExpress and the iPod Touch, I have the new version of Remote on the touch and am running iTunes 8 on Windows Vista with its library on the local harddrive. No glitches, pauses, or problems. I ran it for 6 hours during a party over the weekend without flaw.
-Tim -
While dealing with an external hardware i got a Java update4 request,but was not able to complete that update.After that when i switch on my Mac it shows reinstallation required.i was working with OSX 10.8.5,but after reinstallation now it is 10.7.5 .And while doing search for update it shows your software is uptodate..
Hi Hal,
One possibility, is a strange occurence when applying the big 10.5.8 combo, most people have to Repair Permissions twice in a row, then reboot. -
Applet doesn't show after plugin update & using JNLP, no errors
We have an applet that worked after the plugin update, then I wrote the JNLP file and can't get it working, it seems to be loading but doesn't show anything. I have tried and searched for possible errors but doesn't seem to be any obvious error for me. Also JaNeLA doesn't give any errors. When I try to load the applet I can see how open two java consoles (maybe this is an error?), in the first console the last output is:
network: Created version ID: 1.0+
network: Created version ID: 6.0.18
basic: Progress indicator deleted: nullAnd in the second:
basic: Subprogram loaded.
basic: Applet resized and added to parent container
basic: PERF: AppletExecutionRunnable - applet.init() BEGIN ; jvmLaunch dt 309262 us, pluginInit dt 2161125 us, TotalTime: 2470387 us
basic: Loading Java Miniapplication
basic: Loading Java MiniapplicationThe jnlp file I wrote is this:
<?xml version="1.0" encoding="utf-8"?>
<jnlp codebase="http://genomedu.net/applet/applet/" href="jvrmed_applet.jnlp">
<information>
<title>JApplet demo</title>
<vendor>Jungle waa</vendor>
<homepage href="http://funforyou.net/"/>
<description>This is a demo</description>
<offline-allowed/>
</information>
<resources>
<j2se href="http://java.sun.com/products/autodl/j2se" version="1.4+"/>
<jar href="http://download.java.net/media/applet-launcher/applet-launcher.jar"/>
<jar href="http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jar"/>
<jar href="http://download.java.net/media/gluegen/webstart/gluegen-rt.jar"/>
<jar href="http://download.java.net/media/java3d/webstart/release/vecmath/latest/vecmath.jar"/>
<jar href="http://download.java.net/media/java3d/webstart/release/j3d/latest/j3dcore.jar"/>
<jar href="http://download.java.net/media/java3d/webstart/release/j3d/latest/j3dutils.jar"/>
<jar href="pixelmed.jar"/>
<jar href="gdata-core-1.0.jar"/>
<jar href="gdata-media-1.0.jar"/>
<jar href="gdata-photos-2.0.jar"/>
<jar href="gdata-photos-meta-2.0.jar"/>
<jar href="google-collect-1.0.jar"/>
<jar href="mail-1.4.3.jar"/>
<jar href="jvrmed.jar" main="true"/>
<extension name="jogl" href="http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jnlp"/>
</resources>
<applet-desc
name="JVRMed_app"
main-class="vrmed.app.jVRMed.JVRMed_app"
width="793"
height="563">
</applet-desc>
</jnlp>
And the applet tag in the html is:
<applet name="jvrmed" code="org.jdesktop.applet.util.JNLPAppletLauncher"
width=793
height=563 >
<param name="jnlp_href" value="http://genomedu.net/applet/jvrmed_applet.jnlp">
</applet>The old applet tag that launched the applet before the plugin update:
<applet name="jvrmed" code="org.jdesktop.applet.util.JNLPAppletLauncher"
width=793
height=563
archive="http://download.java.net/media/applet-launcher/applet-launcher.jar,
http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jar,
http://download.java.net/media/gluegen/webstart/gluegen-rt.jar,
http://download.java.net/media/java3d/webstart/release/vecmath/latest/vecmath.jar,
http://download.java.net/media/java3d/webstart/release/j3d/latest/j3dcore.jar,
http://download.java.net/media/java3d/webstart/release/j3d/latest/j3dutils.jar,
pixelmed.jar,
gdata-core-1.0.jar,
gdata-media-1.0.jar,
gdata-photos-2.0.jar,
gdata-photos-meta-2.0.jar,
google-collect-1.0.jar,
mail-1.4.3.jar,
jvrmed.jar">
<param name="codebase_lookup" value="true">
<param name="subapplet.classname" value="vrmed.app.jVRMed.JVRMed_app">
<param name="subapplet.displayname" value="jVRMed">
<param name="noddraw.check" value="true">
<param name="progressbar" value="true">
<param name="jnlpNumExtensions" value="1">
<param name="jnlpExtension1"
value="http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jnlp">
<param name="idsession" value="jvrmed_snaps">
<param name="idprofile" value="1">
</applet>I know there are many extra parameters in the old version, I have deleted them for debugging because there was the same result with them. What really bothers me is that I don't get any error and the java process is running while tries to load the applet. Anyone had a similar experience and can give a clue?Hi,
since JRE 6u21 the JNLPAppletLauncher doesn't work anymore.
The Java 3D's jars and native libraries hosted by Oracle.Sun can be accessed by including the extension http://download.java.net/media/java3d/webstart/release/java3d-latest.jnlp. More details can be found here : Java 3D Web Start Release https://j3d-webstart.dev.java.net/release/index.html
See also the example 'H'weight & L'weight in Harmony' http://www.interactivemesh.org/testspace/appletpropelleruniverse1200x800_J3D.html and search in the Java 3D forum http://www.java.net/forums/javadesktop/java-desktop-technologies/java-3d
This is an attempt to adapt your JNLP file :
<?xml version="1.0" encoding="utf-8"?>
<jnlp codebase="http://genomedu.net/applet/applet/" href="jvrmed_applet.jnlp">
<information>
<title>JApplet demo</title>
<vendor>Jungle waa</vendor>
<homepage href="http://funforyou.net/"/>
<description>This is a demo</description>
<offline-allowed/>
</information>
<resources>
<j2se href="http://java.sun.com/products/autodl/j2se" version="1.4+"/>
<!-- !!! Includes the remote Java 3D / JOGL libraries !!! -->
<extension href="http://download.java.net/media/java3d/webstart/release/java3d-latest.jnlp"/>
<jar href="pixelmed.jar"/>
<jar href="gdata-core-1.0.jar"/>
<jar href="gdata-media-1.0.jar"/>
<jar href="gdata-photos-2.0.jar"/>
<jar href="gdata-photos-meta-2.0.jar"/>
<jar href="google-collect-1.0.jar"/>
<jar href="mail-1.4.3.jar"/>
<jar href="jvrmed.jar" main="true"/>
<property name="sun.awt.noerasebackground" value="true"/>
<property name="sun.awt.erasebackgroundonresize" value="true"/>
</resources>
<applet-desc
name="JVRMed_app" main-class="vrmed.app.jVRMed.JVRMed_app" width="793" height="563">
</applet-desc>
</jnlp>
Applet tag:
<!-- please check if codebase="??" is needed -->
<applet name="jvrmed" width=793 height=563 >
<param name="jnlp_href" value="http://genomedu.net/applet/jvrmed_applet.jnlp">
</applet>August -
Is there anyone who can help me? my Photoshop CC is keep crashing, it doesn't show any error message. Suddenly " program stop responding" after few seconds of launch.
If Photoshop crashes the should be a System crash report generated by your OS. For example Windows
-
Time Machine backup shows "stopping backup" after just a few Gb.
Time Machine backup shows "stopping backup" after just a few Gb.
Finder shown as "not responding" in Activity Monitor.
1. How to escape from that situation?
2. How to prevent it happening again?
Thanks in advance for help.Thanks for the suggestion, and apologies for the delayed response.
I have had a couple of looks through Pondini's site, but haven't (so far) found exactly what I am experiencing.
In the meantime, I am becoming suspicious of the disk (a Toshiba e-Stor 1Tb) and/or the cable connection. A couple of days ago I set it up with the cable in one of the USB ports on the computer itself, which I understand is supposed to be preferable (to using a hub).
Initially, straightforward copying of folders via the Finder seemed to work, although some failed because the system thought they were 'in use' (another apparently known problem). However, I managed to copy three folders earlier this week, but today, they have simply disappeared from the external disk! The partial backup (from TM) is still visible.
Finder's behaviour is also still rather odd. When I clicked on the external drive to see what content it included, Finder took ages, and Activity Monitor said it was 'not responding' for a time, though that did sort itself out this time, after a few minutes.
To ensure that I have covered everything, I should point out that I have partitioned the disk using the Mac Disk Utility, so that there is a Mac partition and a Windows (FAT) partition that I intend to use for a Windows computer. Apologies for using such bad words on a Mac forum! -
Re: I recently re-installed Lion due to a kernel panic prob. A day after reinstallation, twice in a row it happened, but it stopped.
I want to know if this happened just because it was recently installed, or is the kernel panic still bugging my computer? The kernel panics were 3rd party extensions. If the extension is still connected to me, how do I remove it? Again, It only happened twice since reinstallation.The panic did not have a thing to do with reinstalling Lion or not. There is some other cause. Post your recent panic log.
-
My ipod stopped showing up in itunes after software update
i have an ipod nano and an ipod classic and they both stopped showing up in itunes after i updated the software. please help
Have you tried here:
iOS: Device not recognized in iTunes for Windows -
My 2 monitor stopped showing the image after update
Hi, a few updates ago, I think the second, my 2 monitor stopped showing the image, the system detects it but either have to restart or start the screen saver so that the image is activated, I I tried change the monitor, cables and is the same problem ... what happens alguein miso, know what to do? ... greetings and thanks in advance
This can be caused by a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
HP Pavilian System Fan 90B Error Options Stopped showing up after a few minutes
I've gas thus pavilion g6 laptop for a year and some months now and I got the error message telling me to go to the hp tech center site. I took out the battery last night and left there there still morning when I turned in the computer it said the same thing then I took the batter out really quick then put it back in and the error screen about the fan stopped showing up but i don't think the fan is working, I don't feel any breeze coming from it... I don't know I'd it's fixed... Can I fix it...? Without breaking my computer open?
Hi @CatsRcool
Welcome to the HP Support Forums! I saw your post regarding the problem with the fan. You are going to have to open up the notebook to replace the fan or you can take it to a local technician. If you want to do it yourself here is the Maintenance and Service Guide for your model. On page 75 you will find the part number for the fan and instructions on removing the heat sink assembly which the fan is apart of.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
My iphone photos have stopped showing up in my photo stream folder on my pc. They do show up on my iPad. I tried signing out and back into to iCloud on my pc, but no help. Any ideas?
The iCloud backup only backs up your camera roll photos, not photo stream photos. Also, photos only remain in photo stream for 30 days. After that they are removed from your photo stream, but will remain on your devices that already have them. If all your photo stream photos are older than 30 days, that would explain why they don't stream to your iPhone 5 even though they are on your iPad.
To get them on your phone, you can use an app like PhotoSync, which will wirelessly transfer photos from any album (including photo stream) between your devices. Alternatively, you can save the photo stream photos to the camera roll on your iPad (by opening the My Photo Stream album, tap Edit, tap all the photos to select them, tap Share, tap Save to Camera Roll), then import them to your computer (see http://support.apple.com/kb/HT4083), put them in a folder, then select the folder on the Photos tab of your iTunes sync settings and sync them to your phone. -
Right USB Port stops working after disconnecting device since 10.9.2
Hi,
Since updating to 10.9.2 the right USB port on my MBA stops working after diconnecting a device (tested: external hard drive, USB flash drive, USB HSPA Modem). The only way to get the port recognizing the device on that port is to do a restart. If the device is connected from starting the MBA it works fine, if I then eject the drive and reinsert it or a different USB device the device doesn't get recognized. The devices do get power, my WD passport ultra spins up just fine, the USB HSPA modem also indicates it's working (with signal) but nothing shows up in finder or diskutility. If the modem is connected from start (and thus working) and then disconnect from the internet but not remove the drive I can reconnect to the internet. The problem only occurs after disconnecting the device. The port becomes inactive. The left USB port works as expected.
Steps I've taken:
Disk Persmission
PRAM
SMC
Reapplied the 10.9.2 update
Sent feedback to Apple
Some Output:
Boot Mode: Normal
Total CPU usage:
User 11% System 10%
Max %CPU by process (name, UID, %):
WindowServer 0 4.6
Loaded extrinsic kernel extensions:
at.obdev.nke.LittleSnitch (4052)
com.driver.JRDUSBModemData64 (4.0.5)
com.protech.NoSleep (1.3.3)
Loaded extrinsic daemons:
net.sourceforge.MonolingualHelper
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.freemacsoft.appcleanerd
com.adobe.fpsaud
at.obdev.littlesnitchd
Loaded extrinsic user agents:
com.oracle.java.Java-Updater
at.obdev.LittleSnitchUIAgent
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.oracle.java.Java-Updater.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.freemacsoft.appcleanerd.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
net.sourceforge.MonolingualHelper.plist
/Library/PrivilegedHelperTools:
com.freemacsoft.appcleanerd
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
net.sourceforge.MonolingualHelper
Extrinsic loadable bundles:
/System/Library/Extensions/JRDMassStorageDriver32.kext
(No bundle ID)
/System/Library/Extensions/JRDMassStorageDriver64.kext
(No bundle ID)
/System/Library/Extensions/JRDUSBModemData32.kext
(com.driver.JRDUSBModemData32)
/System/Library/Extensions/JRDUSBModemData64.kext
(com.driver.JRDUSBModemData64)
/System/Library/Extensions/LittleSnitch.kext
(at.obdev.nke.LittleSnitch)
/System/Library/Extensions/NoSleep.kext
(com.protech.NoSleep)
/Library/Audio/Plug-Ins/Components/A52Codec.component
(com.shepmater.A52Codec)
/Library/Internet Plug-Ins/Flash Player.plugin
(com.macromedia.Flash Player.plugin)
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
(com.oracle.java.JavaAppletPlugin)
/Library/PreferencePanes/Flash Player.prefPane
(com.adobe.flashplayerpreferences)
/Library/PreferencePanes/JavaControlPanel.prefPane
(com.oracle.java.JavaControlPanel)
/Library/PreferencePanes/NoSleep.prefPane
(com.protech.NoSleepPref)
/Library/QuickTime/AC3MovieImport.component
(com.cod3r.ac3movieimport)
/Library/Spotlight/LogicPro.mdimporter
(No bundle ID)
Library/Address Book Plug-Ins/SkypeABDialer.bundle
(com.skype.skypeabdialer)
Library/Address Book Plug-Ins/SkypeABSMS.bundle
(com.skype.skypeabsms)
Library/QuickLook/Pacifist.qlgenerator
(com.charlessoft.pacifist.qlgenerator)
Library/Services/Clip to Day One.workflow
(No bundle ID)
Login hook:
/Library/Scripts/Hooks/login.sh
Global login items:
$HELPER_PATH
$HELPER_PATH
$HELPER_PATH
$HELPER_PATH
$HELPER_PATH
User login items:
iTunesHelper
Sparrow
Sort Menubar Items
AppCleaner Helper
SurplusMeterAgent
Safari extensions:
Shut Up
AdBlock
SafariKeywordSearch
Disconnect
MapTricks
Restricted user files: 28
Font problems: 0
Elapsed time (s): 130
etrecheck output:
Hardware Information:
MacBook Air - model: MacBookAir3,1
1 1.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:20
Disk Information:
APPLE SSD TS064C disk0 : (60.67 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 59.81 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
EFI (disk2s1) <not mounted>: 209.7 MB
Radha (disk2s2) /Volumes/Radha: 1.81 TB (1.73 TB free)
disk2s3 (disk2s3) <not mounted>: 189.89 GB
Boot OS X (disk2s4) <not mounted>: 134.2 MB
FireWire Information:
Kernel Extensions:
at.obdev.nke.LittleSnitch Version: 4052
com.driver.JRDUSBModemData64 Version: 4.0.5
com.protech.NoSleep Version: 1.3.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] at.obdev.littlesnitchd.plist
[loaded] com.adobe.fpsaud.plist
[loaded] com.freemacsoft.appcleanerd.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.JavaUpdateHelper.plist
[loaded] net.sourceforge.MonolingualHelper.plist
Launch Agents:
[loaded] at.obdev.LittleSnitchUIAgent.plist
User Launch Agents:
User Login Items:
iTunesHelper
Sparrow
Sort Menubar Items
AppCleaner Helper
SurplusMeterAgent
3rd Party Preference Panes:
Flash Player
Java
NoSleep
Internet Plug-ins:
Default Browser.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes by CPU:
12% com.apple.WebKit.Networking
6% Safari
4% WindowServer
3% EtreCheck
2% hidd
1% Terminal
1% notifyd
1% opendirectoryd
1% com.apple.WebKit.WebContent
0% Dock
Top Processes by Memory:
147 MB Safari
137 MB com.apple.WebKit.WebContent
49 MB mds_stores
29 MB com.apple.WebKit.Networking
27 MB TextEdit
23 MB WindowServer
20 MB Disk
20 MB Sparrow
20 MB CVMCompiler
18 MB Finder
Nothing out of the ordinairy. Thanks for any helpIt's an Apple Pro keyboard and mouse, the dongle is
plugged into the Mac and not the keyboard. The same
set-up is, and has been working on all our other
Macs.
The sleep issue sounds interesting- hum, maybe...
Is your keyboard plugged into one of the USB connections on an Apple monitor? If so, you may want to change that connection to one that is on the G5 itself. My monitor came with a warning note indicating that problems will likely occur if the keyboard is connected to the monitor.
I also had a problem with the automatic sleep function. After much trouble-shooting and a logic board replacement, it was concluded that coming out of the automatic sleep function with any USB device active would freeze the entire USB bus. After disabling automatic sleep in system preferences, I've had no freezing problems. My machine works fine with the manual sleep function in the Apple Menu.
AndyH -
Hi There, Adobe Community!
I am relatively new to After Effects CC and am using it to create a stop motion film with a large amount of photos.
Usually, when importing the individual images into my composition panel, a sequence of editable rectangles appears in the compostition panel allowing me to edit the frame length of the still photos.
After around 950 imported images, the little rectangles suddenly stopped showing up. But when looking at a preview of the project, it's as if the photos are in there, in the sequence they should be. I'm just unable to edit them like the previous ones with recangles showing.
I probably am not describing this too well, so here is a screen shot which hopefully makes my problem somewhat more clear. The area of issue is where you see the descending sequence of boxes in the comp panel. The red tracking bar is there to show that there are still photos continuing the sequence, I just can't see the boxes for em..
thank you so much for any help in the matter!So I guess you are talking about the layers in the timeline go missing, not the handles in the Comp Window.
I think you have run into a display bug. Try selecting the top hundred or so layers and pre-compose them. If the missing layers appear then that's the problem. I have had it happen a couple of times before in previous versions of AE..
Here's a workflow hint for you, break your comps up into short sequences instead of trying to do a 4 or 5 minute piece with 900 layers in a single comp. You'll find editing and changing a lot easier.
I would also pre-mix your music. AE is a really terrible music mixer.... -
Get a waveform graph to stop plotting after a given time period
I am doing a research project looking at the effects of modifying visual feedback on a person's current force output. I have a waveform graph that plots the target force level they are trying to match (specified by me) and next to it a second plot showing their current force output (in real time). I am trying to make a condition where the current force output plot (or really the whole waveform graph) stops plotting after a 10 s time period, but can't seem to get it to work. It either plots for the whole trial, or does not plot at all. Is there a way to put a timer on a waveform graph in order to tell it to stop plotting after a specified time period?
Thanks!Hi again,
I have tried to open the .vi you sent, but I have version 8.2 (yours is in version 8.5) and cannot open it. Is there a way for you to tave the.vi so that it can be opened with earlier versions of the program?
I have attatched my .vi to this message as well.
Attachments:
bimanual combined with metronome_conds.vi 174 KB
Maybe you are looking for
-
How can I pass a filter value to another report?
I'm using a filter within a formula of a field. For example: (FILTER("Facts - Actuals Ledger"."Actual" USING ("Time"."Fiscal Quarter" = '2012 Q 2'))-FILTER("Facts - Actuals Ledger"."Actual" USING ("Time"."Fiscal Quarter" = '2012 Q 1')))*-1 What the a
-
Web service proxy and security constraint
I've placed a security constraint on my web service and set the login-config auth-method as BASIC. When I run the Workshop test and the (Test View) browser begins to appear I am prompted for my username and password since it is protected --- great, i
-
No sound with Keynote imported video
My boss is planning to show a Keynote presentation from her iPad when she takes it overseas, but we've run into a weird problem. I imported the video into Photos as per the approved way, and when I play it in Photos on the iPad, it has audio. Howev
-
Watch New Zealand vs France live online streaming 2011 rugby
''locking - a Firefox support issue wasn't mentioned'' The showpiece match will be Joubert's first time in charge of a World Cup final. He was unobtrusive while overseeing New Zealand's 20-6 semi-final win over Australia on Sunday. http://foxsportshd
-
How to change the default connection
I've to change programmatically the default connection of the report (6i). I thought to use somenthing like LOGOUT/LOGIN (FORMS6i) in the BeforeReport trigger, but I don't find any valid solution yet. Thanks in advance, Raffaele