AppleTv does not appear in iTunes Preferences

I have replaced and older iMac with a new one. I installed everything from my timemachine backup except the system software. Everything works but not AppleTV sync. There is no AppleTV folder in the preferences. Has anybody an idea? I installed iTunes once again after deinstallation but with no succes.
I thank everybody in advance for an idea.
Best regards
Norb

first, you will have to break and remove the link to your old itunes library on the appletv.
then you need to go thru the process of linking to your new itunes library (as you have replaced your imac it is essentially a new itunes library).

Similar Messages

  • AppleTV does not appear on iTunes list - upload problems

    I am having a problem with my AppleTV appearing in devices on iTunes.
    I am using the newest Airport(N) and an Apple TV in the bedroom.
    All software is up to date.
    Good signal on MacBook Pro when in bedroom so I know I have a good signal from Airport to AppleTV
    Problem:
    When I open iTunes the ATV does not show up.
    I download a TV show.
    It appears on my library list as completed.
    But, it does not access and upload to the ATV.
    I turn APBase off, wait 20 seconds and when turned back on it still does not appear.
    I go to Airport Utilities and go through setup. No luck.
    Restart Macbook system. No luck.
    _The only way I can get it to appear and upload_ is to unplug the ATV and let it restart.
    Then I get the upload.
    This is not fun. It should be automatic.
    Harold

    I fix my problem. The port UDP 5353 was not open correctly in the firewall modem.

  • AppleTV does not appear in iTunes

    Hello,
    I just install the AppleTV. I don't see the AppleTV in iTunes but I can go on the internet with the AppleTV (YouTube). I use a 2Wire modem (2701HG-G). I try wireless and with wire. I use the last version of iTunes.
    What can be wrong?
    Thanks for you help.

    I fix my problem. The port UDP 5353 was not open correctly in the firewall modem.

  • Apple TV 1st gen does not show in itunes preferences or devices

    Apple tv 1st gen does not appear in itunes devices nor in preferences. The words "Apple TV" appear no where in itunes whatsoever.
    Windows 7
    Apple TV 1st Generation
    It used to be there but not since I updated itunes.
    I have tried:
    re-install itunes (version10.7.0.21)
    re-set apple tv
    unplug all cables on apple tv and router
    performance test on apple tv (OK)
    turn off "Home sharing"
    turn on "Home sharing"
    "Share my library on local network"  - Off - On - Off - On
    The apple tv works fine and it is connected to my network (I can watch youtube no problem).
    I've now spent about 6 hours researching any other possibilities to no avail. Any help appreciated.

    Thanks for all the helpful answers I received on this thread!!!!
    Anyway, this morning I received the notification to download the 10.1.2.17 which I did. This resolved my problem.
    I am still a bit sceptical that the same symptom my return as it happened the same way in the past.
    Fingers crossed!!

  • Device Synch Menus does not appear in iTunes 11 on Windows 8 PC

    My 3rd generation iPod Nano connected to Windows-8 PC and iTunes 11 - Device "Summary" menu does not appear.  If you select the <File> menu in iTunes there is an option to "Synch Nano".  My iTunes is set to manually manage music on the Nano - because the "Summary" menu does not appear in iTunes it is impossible to select albums to Synch with the Nano.
    On the upper right bar there is an eject button for the iPod Nano.  This does in fact eject the Nano device and re-appears in iTunes if you disconnect the device then reconnect the iPod Nano.
    No other device menus are present in iTunes 11 under Windows-8.  The iPod Nano music library also does not appear.
    Only the PC based iTunes music library is visible.
    Itunes software versions are both current on the Nano and Windows-8 PC.
    The computer was deauthorized and then authorized in iTunes.
    The Synch History was reset in iTunes Preferences - this did not re-establish the Nano as a device to synch with iTunes.  (Typically fixes similar problems)
    Resetting nano device by holding Menu after switching unit on/off (Apple Logo Appears then Reboots Nano) makes no difference.
    Nano shows as a drive in Windows-8 in "My Computer" and the operating system recognizes the device connection.
    No problem ejecting and reconnecting the Nano in Itunes but traditional device menus are gone with the exception of the eject button.
    Tested the same iTunes Nano on two other computers with iTunes 11 installed on Windows-7 and Windows XP - works fine.  This issue only occurs on Windows-8 computers.
    Any suggestions would be appreciated.

    I just updated iTunes today and this seems to be the cause
    If you're already at version 11.1.5.5, try the procedure in Cerbu's post:
    Re: sync problem
    ... or try section 5 from the following document:
    TS1538: iOS: Device not recognized in iTunes for Windows.

  • TS3716 iPod classic does not appear in iTunes for Mac since updating to 11.0.

    iPod classic does not appear in iTunes for Mac since updating to 11.0. It appears on the desktop and iTunes starts up when the iPod is connected, but it does not appear in a form so that I can manage its contents.

    Mike:
    Just had the very same problem.  iPod Classic shows up on my desktop but not in iTunes (11.0.1).  I tried restarting iPod while connected as suggested elsewhere.  Didn't work.  What did seem to work however was, while the iPod is connected (and on the desktop) restart iTunes.  Once it restarted it was there and synching.  I also, before restart, made sure that auto-synching was set up in iTunes preferences (under devices).
    Try this.  May work for you as well.

  • I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks

    I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks.

    Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
    http://support.apple.com/kb/TS1567
    More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495

  • I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?

    I have OS 10.4.11 and iTunes 9.2.1 (5). My iPhone 4s does not appear in iTunes. only iPhoto recognize my iPhone. Update of iTunes seems not possible. How can I make appear my iPhone in iTunes?

    From the box the iphone came in:
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.5.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.5 or later (free download fromwww.itunes.com/download)"
    You will need Mac OS 10.5.8 or later in order to get itunes 10.5 or later, in order to connect your iphone.

  • My iPod frozen on "Do not disconnect" yet it does not appear in iTunes on my computer ?

    My iPod seems to be frozen on "Do not disconnect" yet it does not appear in iTunes on my computer ? Eventually I did disconnect. It's remains frozen and shows almost full charge.

    I'm having similar problems. Here is exactly what happens to me:
    I dock the iPod (I believe it is the 5th gen model, one of the first to play videos). Sometimes it syncs properly sometimes not. It will add songs not on my iPod, but it won't update the play count, last played, etc. The problem was fixed when I updated to a new version of iTunes (I believe it was 7.2 at the time, I could be wrong). So I played it off just being an iTunes issue. Well, with 2 updates since then, it has done it yet again. I've tried to restart the iPod using the menu+select key. It will work to remove the iPod, but it won't help in the future. The only way I can remove the iPod is to click on "Safely Remove Hardware." I know this isn't good for the iPod, but this is the only way that I can get the "Do not disconnect" icon off my iPod. Also, I tried to click "Eject iPod" (I've used this several times in emergency cases and worked wonders) but I get a message saying "iPod is in use by another windows program." I couldn't imagine what program is using my iPod. As far as I know, iTunes is the only program that can use the iPod on my computer. Any help would be greatly appreciated.

  • My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset, and ipod does not appear on itunes when I plug it into the computer.  This happened after I agreed to a failed software update.

    My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either.  This happened after I agreed to a software update which failed.  How can I get it going again?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

    not recognized by anything: http://support.apple.com/kb/TS1369
    recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
    solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
    (make sure you go to the next slides.

  • Ipod 160g does not appear on itunes but it appears on windows when in disk mode

    my ipod 160 g does not appear in itune (disk mode or not) but it appears in windows as IPOD (F:) only when it's in disk mode. I tried reseting it by holding the menu and center button it stop but then it goes back to the apple logo screen and stay on untill the battery dies and nothing else happens how can I reset it to is factory settings?

    When you connect it in Disk Mode, leave it charging the iPod Battery till Full Charge.
    In the meantime, 30 minutes or so into the charging, ( I just want the Ipod to have sufficient power for any harddisk Operation)
    go to Window Explorer (or My Computer),
    Select the Ipod, right click properties, ->tools->error checking->Check Now->fix error
    After the error fixing (may take a while but then you still have to wait till the battery charging is complete.)
    Disconnect the iPod from the PC.
    Antivirus has a tendency to freeze Itunes sync Operation with Ipod Classic, causing a timeout, which corrupt your Ipod filesystem, so when iTunes cant read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
    My suggestion.
    Connect your Ipod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete. - Done above
    Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
    Stop the Antivirus program
    Connect your Ipod to the PC
    When Itunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
    When Restore complete, eject the iPod and reconnect again.
    Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well, since you got such a huge library.
    When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
    Good Luck! and have a Nice Day!

  • Ipod does not appear in itunes after windows scan and fix

    Two days ago, I restored my Ipod classic using Itunes 9.2.0.61. After restoration my Ipod started freezing Itunes and Vista. At a point, I saw a blue screen and my computer forced a shutdown. When it rebooted, Vista kept asking to automatically "scan and fix" problems on my Ipod. Thinking that would solve the "freeze" problem, I stupidly went ahead to have Vista scan and fix my Ipod. Now the freeze problem is gone, but my Ipod does not appear in Itunes. I have tried the five Rs from Apple, but that has not helped. Anyone with a solution?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4. Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
    7. Check for third-party software conflicts.

  • My iphone5 no longer shows up as a device on my computer when I plug it in to a USB port on my laptop.  It does not appear in iTunes as connected, either.

    My iphone5 no longer shows up as a device on my computer when I plug it in to a USB port on my laptop.  It does not appear in iTunes as connected, either.  It does show that it is connected and charging on the phone itself.  This is a new problem.  It used to work just fine.

    Hi Why do you need to use a PC since iOS 7 you can download updates Apps everything Over wifi I have iPhone 5 s & 2 ipads in over a year I have never connected them to My Apple pc Try a wifi update If you have problems Try a Reboot press & hold power button & menu button hold both Down until You see Apple Logo you will not last any data. Cheers Brian

  • My ipad does not appear in itunes. I am OS 10.6, itunes is up to date, I have restarted computer and ipad and switched usb sockets. Dont know if its related, but I can no longer see my sony handycam in imovies too.

    My brand new iPad 2 does not appear in iTunes. I am OS 10.6, iTunes is up to date, I have restarted computer and iPad and switched usb sockets. Don't know if its related, but I can no longer see my Sony Handycam in iMovies too.

    What content are you wanting to copy of the iPad ? You should be able to copy off anything that you've purchased from Apple (films, music, ibooks, apps etc) by connecting the iPad to your computer's iTunes and doing File > Transfer Purchases. If you want to copy off music copied from your own CDs or purchased from other sites then you will need to find a program for your computer that can copy them off – iTunes won't copy them off.
    For photos taken with the iPad, copied to it via the camera connection kit or saved from emails/websites then you should be able to copy them off via the Windows camera wizard.
    For photos that were originally synced from a computer you will need a third-party app such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer.
    Content in third-party apps (documents and files etc) then how you copy that content off will depend upon what the apps that they are in support e.g.either via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc.

Maybe you are looking for

  • Multiple Tables in Pages

    I am trying to set up a template which will use multiple tables. The first couple of tables (4Rx3C; 11Rx3C) work fine. The 4x3 table is across the top and the 11x3 table is on the left hand side of the page below it. I would like to add two more tabl

  • Error while running jms program in eclipse

    Hi, Friends.I am new to forum.This is the first question I am posting.I am new to Java Messaging service.While running the program in eclipse I am getting the following error... javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for '

  • Screensaver not finding pictures - it USED to, but doesn't now

    I've used an album of photos for my screensaver for months and months without issue. The photos are in an album in iPhoto. However, this week, I inadvertently switched to a different screensaver. When I reselected my album for a pictures slideshow, t

  • Mv replication between Oracle 10g standared edition one and enterpriseedit

    i have one ee 10g and 30 se-1 mv sites ,i have to replicate more than 100 tables from aabout 30 sites which have standared edition one to master site(enterprise edition0 . 1. Is it possible if yes then how? 2. is it will be 2 way updatable changes on

  • Adobe form integration in WDA

    Gudday, I need to integrate my adobe form in webdynpro using ABAP and fill the form from the browser which should get updated in the database. I hav form which will display fields like pernr,vorna,nachn. After inserting the form integration element..