AppleTV Media Network Hangs on Video

Network Setup:
MacBook Pro - Serving the iTunes library out to devices - WIRED CONNECTION
DROBO FS - 4tb used - Contains the iTunes Library - audio and HD video both - WIRED CONNECTION
Airport Extreme - Base station serving the wireless network out to the house
Airport Express (4 units) - Extending the wireless network throughout the house - signal quality remains consistantly maximum throughout the house (tested using iOS devises, Android devices, and WindowsMobile devices) - AirPort utility shows that all AirportExpress units are connecting directly to the AirportExtreme base.
iPad 2 (4 units) - Using the Remote App
AppleTV2 (6 Units) - Connected to Tv's throughout the house - WIRELESS CONNECTION
Home Sharing is enabled.
All devices current on patching and updates (as of last week)
Problem:
AppleTV's are not consistantly able to pull video content from the shared library.
iPad with remote is able to see the shared library and queue up video, but some ATV devices will not play the queued video, endless "wheel" showing that it is trying to serve the media up. Audio files correctly queue and play. Streaming services will correctly play (Netflix, Youtube, Trailers from Apple, etc.)
iPads are able to play shared video and audio content with no issue via AirPlay - also tested this standing next to ATV units to verify that no wireless dead-zones were interfering.
Macbook is able to play all media without issue.
The only devices on the wireless network are those listed above. Network is secured, no additional devices causing interference, No additional devices are showing as connected in AirPort utility. Only trying to serve media to one ATV unit at a time.

Hi,
Are you still having problems with CS6 Video Export?
What Export settings are you using? (A screencapture might be the fastest way to answer that.)
Does it work if you use the default settings?
If you have time to experiment, I have some suggestions:
Would you please try/verify the following:
1. Be sure virus/security/parental control software hasn't trapped parts of Photoshop, Bridge, Premiere, Lightroom, or any Adobe app using DynamicLinkMediaServer. (Make sure the Adobe apps are added as exceptions if needed.)
2. Ensure you have the latest version of QuickTime
3. Close all Adobe applications - wait more than 30 seconds, then launch Photoshop and try to open and export the file.
- If unsuccessful, view Task Manager/Processes to verify necessary processes started up when importing video (dynamiclinkmanager.exe, dynamiclinkmediaserver.exe and Adobe QT32 Server.exe)
- If unsuccessful, please capture the full error message text.
4. Close all Adobe apps, wait 30 seconds - launch Bridge and try to open/export the file.
Thanks,
Meredith

Similar Messages

Adobe Media Encoder hanging

Premiere Pro CS4
File > Export > Youtube SD > 640x480
Media on C drive > encoding to C drive
After 3 mins, adobe media encoder hangs, elapsed queue time does not move, elapsed time does not move, estimated remaining does not move.
I only have 2 titles in video, no video transitions, and an mp3 audio file i added in.
what should i try?

Jim,
I did a quick small project and it did not hang.
Ever since I overlayed the audio track with my MP3 audio it has been causing issues.
The estimateed remaining time starts at 38:00 then quickly goes down to 13:06 or so, and then it hangs. In the task manager, the processes are still running and under performance PF Usage is 3.38 GB (probably all of the RAM), and CPU at 0%.
I'm gonna let it run for a few hours to see if it moves at all. then if that doesn't work remove the audio and see if that works.
Update:1 hour no movement.
ImporterPrcoessServer.exe 1,060,656 K
PProHeadless.exe 106,616K
Adobe Premiere Pro.exe 33,900K
PhotoshopServer.exe 6,738 K
Any other suggestions?

Samsung BD-6500 won't see my Media Network on WRT610N

My Samsung BD-6500 won't see my Media Network... It wil see and connect to my Main Network. I have a WRT610N.
Any suggestions?
Thanks

1. Update the firmware. You can get it by going to the Samsung Support website. Click on link below to get manuals and firmware upgrades:
http://www.samsung.com/us/consumer/tv-video/blu-ray/blu-ray-players/BD-C6500/XAA/index.idx?pagetype=...
You can also do this after performing steps 2-5 if they don't work ... if this is a new system ... it’s hard to just go right in and start updating firmware, but it may be necessary if it’s not a current firmware revision.
2. Next, go to the setup screen on Samsung DVD player and find the Mac address then carefully write it down on a piece of paper. The 10 digit Mac address will look something like this: 1c:c1:0b:9d::c0. Remember to put the colons between each pair of digits.
3. Bring the Mac address over to your router and access the router.
4. Once in the router setup, go to wireless settings and find the Mac address filtering setup. Enable the Mac filtering and enter the Mac address of the player into one of the Mac address boxes - select "Permit PC" - save settings. It's important to note - it will either "Permit" or "Prevent" a Mac address - so make sure when you are done and Mac address is saved, it appears as "Permitted".
5. Go back to the Samsung BD-6500 Player and do a reset. Once done, select the router name in the list and continue setup steps. You should now see the IP Address and other values auto-loaded and a message box that says, "Connected".
I don't know the Blueray well enough to walk you through the menu specifically - but I think this should get you going in the right direction.
Hope this helps,
Bill

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
thanks
larry

I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
Use what you have for a system backup or for secondary backup storage.
you might be able to take the drive - most cases allow you to open and swap drives - and use this:
G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive
or this:
http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

I have upgraded to Lion Os but my Network storage (Iomega Home Media Network hard drive) does not work with Time Machine. Are there any solution available?

I have upgraded to Lion OS only to find that my NAS (Iomega Home Media Network hard drive) does not work. It tells me that it is not configured. Are there any solutions . Have Iomega sorted out the problem?

Same issue here. Based on what I can tell, iomega still has not developed a solution to the problem. See below:
https://iomega-na-en.custhelp.com/app/answers/detail/a_id/28327/kw/Mac%20OS%20X% 20Lion

Iomega Home Media Network Hard Drive contents not appearing in iTunes

I'm running iTunes 10.5.1 on my MacBook which is running OS X 10.6.8
I've got an iomega Home Media Network Hard Drive ( http://tinyurl.com/l8jmaa ) NAS hooked up to my home intranet, and I use it as the master repository for all my music for iTunes, as I've got multiple computers in the house, and the device (with iTunes and DLNA activated) will show up in the "Shared" section of my iTunes source list, and I can view and play all my music from there.
Sometime over the course of the last few iTunes updates, however, this functionality broke, and I'm not sure why. The device shows up in the "Shared" section still, but when I click on it, iTunes shows a message on its screen that says "Loading "Iomega-0557fc" (yeah yeah, I didn't give my drive a spiffy name, I just stuck with the stock out-of-the-box name) and gives me the horixzontal cady-cane, and the little circle spinner spins away to the right of the device in the source list, but iTunes never actually completes the task of bringing up an index of the drive.
The drive itself is fully functional. All the settings are proper on it, I can move data on and off from the Finder, I can even drag-and-drop music files from the NAS in the Finder into iTunes and the files will add to playlists and play just fine (I've got "Copy files to iTunes Media Folder..." turned off, so I know they're playing from the NAS) so it's not like there's some kind of malfuction on the NAS itself. I've also made sure I've got the latest firmware updates and such.
I'm sure I'm not the only one with one of these drives, and I'm hoping someone else has encountered this issue and figured it out! Any help is appreciated!

Hi , I have similar problem..It was working initially and for some reason it stopped. I device shows up on the SHARED , however when I click it doesnt load the songs..however I am able to stream songs from Iomega NAS via other DLNA clients (ace player etc in ipad)...

Dynamic Link Media Server Error On Video Export Photoshop CC 2014

Dynamic Link Media Server Error On Video Export Photoshop CC 2014

Hi,
Are you still having problems with CS6 Video Export?
What Export settings are you using? (A screencapture might be the fastest way to answer that.)
Does it work if you use the default settings?
If you have time to experiment, I have some suggestions:
Would you please try/verify the following:
1. Be sure virus/security/parental control software hasn't trapped parts of Photoshop, Bridge, Premiere, Lightroom, or any Adobe app using DynamicLinkMediaServer. (Make sure the Adobe apps are added as exceptions if needed.)
2. Ensure you have the latest version of QuickTime
3. Close all Adobe applications - wait more than 30 seconds, then launch Photoshop and try to open and export the file.
- If unsuccessful, view Task Manager/Processes to verify necessary processes started up when importing video (dynamiclinkmanager.exe, dynamiclinkmediaserver.exe and Adobe QT32 Server.exe)
- If unsuccessful, please capture the full error message text.
4. Close all Adobe apps, wait 30 seconds - launch Bridge and try to open/export the file.
Thanks,
Meredith

"Home Media Network Hard Drive - Cloud Edition": what is it?

I have a "Home Media Network Hard Drive - Cloud Edition".
I want to update the firmware (actually, I already did, but may have made a mistake).
When I go to the support page https://lenovo-na-en.custhelp.com/app/subproduct/p/1031 I find that there are two choices that have names similar to my unit's, but not identical.
Is one of these actually the same as my model? If so, which? If not, how do I get support for my model? Why isn't this clear?
PS: These names are awkward, long, and confusing. So long that I could not put all of them in the Subject. Too late to change them now.
Solved!
Go to Solution.

Hello HughR
See the below hotlinks for a picture confirmation of each device.
If the Home Media (Network Hard Drive) Cloud Edition (HMNHDII) is your device, then you would want to follow the firmware update guide from here.
If you have the Home Media Network Hard drive (HMNHD) then you should follow the firmware update guide from here.
From your post it seems you have the Home Media CE, the second generation of home media NAS. The " Home Media Cloud Edition " link would be the correct link to access the support page for the device.
The names are long, hence the abbreviation from "Home Media Network Hard Drive - Cloud Edition" to just "Home Media Cloud Edition"
Hope this all helps!
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Can't access Iomega Home Media Network HD from my MacBook Air

Hello,
I recently bought a MacBook Air that is currently running OS X 10.8.4. This is my first MacBook.
I have an Iomega Home Media Network Hard Drive, but I can't connect to it. I downloaded their most recent software for Mac (the LSM client for Mac OS 10.6-10.8, version 1.4.3.9580), but keep getting a message saying "The version of the server you are trying to connect is not supported" when I try to access my files from my Mac.
I tried to find the answers from Lenovo, who bought the Iomega, but their support seems very poor and I wasn't able to reach anyone about it since my warranty has expired.
I was wondering if some one could please guide me to find a solution to this problem.
Thank you so much in advance!
Thais

Preferably, get rid of that junky device. If you don't want to do that, see below.
Connecting to legacy AFP services

View original media after clicking on video clip icon?

Hello
Does anyone know if it's possible to change the FCS configuration so that I can view the original media after clicking on video clip icon? Normally this opens proxy files but I would like to change the default behavior.
thanks
sj

I don't know if you change the behavior by default.
But you can for example
1. Right click the asset and select View - Original Media
2. Click and drag the asset on top of the Quicktime icon, If the device you're Original Media is located is configure for Edit-In-Place.
Hope this helps.
Nicholas Stokes
XPlatform Consulting

Media Encoder Hangs on File Import and Playback

Media Encode Hangs on launch (extremely slow not normal). When I drag and drop a file it hangs or using file import it hangs. Encodes that should only take a few minutes are listed as 1 hour.
I use media encoder all the time it does not perform like this! Anyone else experiencing these problems?
Thanks,
System Info
Z800 8 core 12Gig Memory Nividia FX5800 Adobe CC Suite lastest updates. (Media Encoder 7.2)

Still experiencing unexpected behaviour when drag and droping files into project window. I have draged the same file sometimes it loads instantly other times it takes as much as 3 minutes to load. The file size is 354 mb. No other programs are running. Anyone have similar behaviour?

Why is final cut pro x 10.0.8 hanging in video preview?

why is final cut pro x 10.0.8 hanging in video preview?

There's all kinds of problems with FCP and the new iMacs.
Mostly it's running out of memory, there are several threads about it. I hope there will be an update soon!

WRT54G2 and Iomega Home Media Network HDD

So I am on my second HDD with Iomega. I am thinking now that this is a router problem rather than a HDD problem. I have a 1TB Iomega home media network drive, eversince I bought my router and began using it I have been unable to use my HDD. It is hard wired to the router via RJ-45 cable and both units have been reset and powered up in about every order you can imagine. I have reset factory defaults on the router and made security changes to ensure there was nothing blocking that port. I am at wits end. I cannot connect to the HDD and the drive flashes yellow and blue indicating it cannot estabilsh or receive an IP address from the router. Can anone help me with this. The drive has already been replaced once after the same symptoms occurred previously. Any help is appreciated.

Per the Iomega support site:
How do I find the Home Media Network Hard Drive on my network?
Install the Iomega Home Storage Manager software. Once the installation completes, the Iomega Home Storage Manager icon will appear in the system tray (Windows) or Menu Bar (Mac) and your computer will automatically be connected to the Home Media drive's shared folders.
NOTE: If no DHCP server is found on your network the Home Media Drive will get the self-assigned IP address 169.254.55.82.
NOTE: The Iomega Home Storage Manager will automatically scan your network and connect to available shared folders. If you receive a message from your operating system's firewall alerting you of network activity, click the unblock button.
Mac Users: The Iomega Home Media drive's shared folders should mount and appear on the Mac Desktop.
PC Users: The Iomega Home Media drive's shared folders will automatically be assigned a drive letter and will be available in the Network Drives section under My Computer.
Also see the User Manual for the drive or the Iomega online support site.
The network drive has a menu system to allow the user to configure the network settings for the drive. Log into the drive per the User Manual directions and check the Network settings to ensure the Automatic (DHCP) is enabled. When this option is enabled it should pull an IP address from the router.
One other option is to configure the IP setting to Manual in the Network page on the network drive and input an IP address (Static IP Address) outside of the IP addresses the router will hand out via its DHCP server. You would also have to fill out any additional settings for the Manual option. So for example if the router is configured for IP address of 192,16.1.1, and a starting DHCP IP address of xxx.xxx.xxx.100 and a Maximum Number of DHCP Users of 50 than set the network drive's IP address to 192.168.1.200, or any ending IP number between 151 and 254, or between 2 and 99. That way it won't conflict with the router's DHCP address assignments and it will always have the same IP address.

Opening multiple tabs not working, network hangs

Like the title says, when I open multiple tabs at once Safari hangs my network. Maybe two of tabs are loaded the others are stopped in the middle...and the whole network hangs...

Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

How to use LABVIEW to collect wireless network camera (with video server) video.

How to use LABVIEW to collect wireless network camera (with video server) video.I would like to use LABVIEW for a wireless network camera (IP Camera comes with the video server module)the client program.Will the ability to achieve?If feasible, how to do, there are examples, thank you.

I believe NI Vision is what you are looking for.

AppleTV Media Network Hangs on Video

Similar Messages

Maybe you are looking for