AppleTV not working with Yamaha AV Receiver

I have a Yamaha RX-V665 AV Receiver. All of my other HDMI devices (a blu-ray player and connected macbook) work just fine through the receiver going to my Panasonic 65" display. However the AppleTV 2 (purchased May 2012) does not.
Any ideas?
I've already tried plugging directly to the display and it works.
I've tried swapping cables - all of my cables are fast enough and good.
I've reset the AppleTV.
I have the latest AppleTV software (as of 7-24-2012)
Thanks.

Sorry. By it's not working I mean there's no image on the display as AppleTV is going into the receiver and out from it to the receiver. I've tried all of the receiver ports with my HDMI capable devices and they all work. It's only the AppleTV that doesn't seem tot work with it.

Similar Messages

IPod Touch not working with Yamaha YDS-11, since version 3.1.1

In July 2009, I purchased a Yamaha home theater receiver model HTR-6240 with an iPod Universal dock YDS-11. The iPod Touch worked fine on it until I upgraded the iPod firmware to 3.1.1. When connected, it charges the iPod but the music only comes out of the iPod internal speaker and static comes out of the stereo speakers when turned up. I use an FM transmitter in the car that uses the line out and charges the Touch, and that still works since the upgrade. The Yamaha dock works fine with my 4th gen nano, so I am wondering how the 3.1.1 Touch upgrade affected the line out. Has anyone else run into this situation?

I'm having the same problem using I use my iPod Touch (Gen1) in a Denon ASD-11R Dock hooked up to my receiver. Prior to installing the upgrade, this setup worked very well and I was able to view all of the functions on my TV screen and fully control the IPod. Since the upgrade, when I try to view the IPod Touch through my system, it shows that it is "Loading" for about a minute and then reports "No Song". I tried rebooting and restoring the IPod a couple of times and this did not change the situation. I can still control the IPod through my remote (play, pause and skip songs), but cannot get it fully functional with my sound system like it was prior to the software upgrade.

Appletv not working with iPad

Is anyone else having problems streaming from the iPad to appletv? I can't AirPlay my music from the iPod, videos or any apps. Occasionally i can do a photo slide show, but when I try it with music it staggers and doesn't even play at all.

Welcome to the Apple Community.
You could try restarting all the equipment including the router, but I suspect you have a problem with your network, try changing to another channel to try to avoid interference.

Appletv remote app and airplay not working with iphone 4S

I have the latest appleTV. I have the remote app loaded onto my ipad3 and iphone 4S. The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV. It used to work. I have deleted and reloaded the app, and still nothing. It worked fined until a month ago or so. I have enabled home sharing.
The app and airlplay are working just fine with the ipad3. I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router. I don't think this is the issue, because it worked before.
Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC. Nothing seems happed on the computer when I enter the code. Could this have anything to do with recent appleTV or itunes updates? Any possible solutions?

It seems like I am having the same problem.
I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
(1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
(2) iMac not Airplay to AppleTV
(3) Airplay Mirroring not working
The following are done:
- Home sharing enabled
- To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

Optical Audio Is Not Working with Onkyo Receiver TX-SR501

Hello,
I can't seem to make the optical audio from Apple TV work with my Onkyo Receiver TX-SR501. The Onkyo has 2 optical audio lines in in the back. When I hit the "digital input" button on the front of receiver, I can select from OPT1, OPT2, or COAX. I currently have the optical audio line going into OPT2, but if I select OPT2, I hear no sound. Any suggestions?
Thanks,
Holly

I have the exact same receiver (Onkyo TX SR-501) and tgibbs is correct...you must (during a setup process) link each function (DVD, Video 1, Video 2, Video 3, CD, etc.) with its audio source. The Optical cable doesn't connect to a "function" in the back, it connects to an "input". The receiver gives you the freedom to use different inputs with different functions. It's your job, durng the "setup" to map each of these inputs to each function...that way the receiver knows where to go looking for the audio that you are feeding into it for each function you choose. The owners manual has a pretty clear setup process outlined in it.
Not clear to me that you understood this, so forgive me if I am explaining what is already clear to you.

APPLE TV DOES NOT WORK WITH NETFLIX

APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

It started working.....!!!!! (It seems someone back there is listening)
I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
TIPS:
I didn´t change any language or video quality configuration (scared to do so)
I changed to ethernet (cable) instead of wireless
My internet plan is 6 Megabytes (it was the same while it wasn't working)
good luck!!

Bought iPhone as "SIM-Free", but it not work with my local SIM card

I have bought iPhone Serial No: 82108W75A4T in Canada as "SIM-Free", but it not work with my local SIM (Orange in Israel) card. Where to check: it is or not Factory Unlocked or have any hardware/software problems or have carrier ("adhered" any phone company)

In the local Orange: They tried with them SIM, the same negative result.
I have addressed to Canadien phone wireless carriers.
From some [Rogers'] has already received the answer:
... have checked our system and did not find your iPhone listed... Please contact Apple...

I bought this iPhone from Apple Retail Store for the full amount, but it does not work with my SIM card only works with AT&T

Hello,
I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
Thanks,
Best Wishes

When did you buy it?
Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason. Return it and get your money back, then use that to purchase an unlocked phone.

HT202157 My apple TV is not working with light flashing after up date

My apple TV is not working with the light flashing after an up date, what can be done?

same here macbok air 2012 appletv 3 bugs the **** out of me
it just stops randomly after a "while"

My Apple TV is not working with my Macbook pro 13 inch mountain lion after Apple TV upgrade?

My Apple TV is not working with my Macbook pro 13 inch mountain lion OS X 10.8.2 after Apple TV upgrade?
I am getting an error message as soon as I try to connect my Apple TV
An error occurred (-6722) while connecting to the AirPlay device “Apple TV”
it was working fine however after the upgrde it is giving me the above error message

same here macbok air 2012 appletv 3 bugs the **** out of me
it just stops randomly after a "while"

IMessage not working with one single contact

My iPhone has stopped sending iMessages to one singular contact. Before today we have been using iMessage to communicate regularly. This is the only contact that iMessage does to not work with on my phone and on his he can iMessage me but I don't receive these messages. Also in group chats we can no longer communicate due to this issue.

Did anyone fix this problem?
This just happened to me yesterday! I have iOS 7.1, had no issues until yesterday!
I can iMessage my iMessage friends on my iPad with no problem, but the iPhone 5 randomlly decided yesterday that it would only iMessage selective people!
I've tried everthing I can find so far.

HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
HP Color LaserJet Pro MFP M177fw) is not working with this OS.
Give me a urgent solution

Hi @HealthITLadyRed,
I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue.
Check and remove any packaging material inside the printer and toner.
Disconnect the USB/Network/FAX and power the printer on Standalone.
Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
Update the printer's firmware by a USB connection. Software and Drivers.
Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
I can send a private message with another step to try.
In the forum beside your handle name just click on the envelope to view it.
How is the printer connected? (USB/Ethernet/Wireless)
What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
Is this a new printer?
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

TS4139 I had 2 MobileMe email addresses, but only went thru ICloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with both addresses? Can I get that address back?

I had 2 MobileMe email addresses, but only went thru iCloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with each address? Can I still get that secondary address to work with iCloud?

It was totally separate. I just now went back to a previous email from Apple to that secondary address which urged me to transition to iCloud. I followed the link and it prompted me thru the process and the address is now able to send/receive emails. Thanks.

M-Audio MIDISPORT UNO USB Not Working With Snow Leopard

My Snow Leopard installation worked fine except until I plugged in my MacBook to my Casio Privia with the M=Audio MIDISPORT UNO USB cable to run GarageBand. I'm getting a MIDI error which states it can't work with the latest operating system. It doesn't surprise me though for all the software and hardware driver updates that have to catch up to such a new OSX 10.6. I went to the M-Audio site to download the latest driver, but the drivers only were compatible with OSX10.5.8.
This is an alert at the site
Mac OS X 10.6 Snow Leopard Support Coming Soon
Avid/M-Audio working closely with Apple to offer support for OS X 10.6
Avid/M-Audio is pleased to hear that Apple has released Mac OS X 10.6 Snow Leopard. We’ve been working closely with Apple to bring Snow Leopard support to the M-Audio® product line, as well as the Pro Tools® product line and extended product families. We ask that all existing Mac users please wait to upgrade until we officially announce Snow Leopard support. Stay tuned for more information in the coming weeks.
This is a bit of a concern, because I need to get GarageBand running again with the MIDI hook ups. Is there a work around anyone knows about to get MIDI working with Snow Leopard.
Thanks Steve

I ran into a similar problem. I discovered one thing which may help you out though. It works OK with my Yamaha P200 keyboard but it does not work with my Yamaha NP30 keyboard. I looked at the MIDI stream and the only difference seems to be that the NP30 sends a continuous stream of MIDI clock, whereas the P200 does not. My theory is that this clock stream is somehow confusing the driver. I can't seem to disable the MIDI clock on my NP30 but if your Privia has the ability to disable MIDI clock, then it may be worth a try as it will probably fix the problem until they come out with the proper drivers.

[svn:bz-trunk] 16395: Bug: #2621264 [Regression] Small messages not working with NIO-HTTP endpoints in LCSD/trunk.

Revision: 16395
Revision: 16395
Author:   [email protected]
Date:     2010-06-02 05:00:56 -0700 (Wed, 02 Jun 2010)
Log Message:
Bug: #2621264 Small messages not working with NIO-HTTP endpoints in LCSD/trunk.
QA: Yes
Doc: No
Checkintests: Pass
Details: This is the BlazeDS side of the fix. This wasn't a regression, it probably never worked correctly. So, in the scenario where there's a Producer and a Consumer, and Producer sends a message for the Consumer, there are 2 messages from the server. The ACK message for Producer's send, and the actual message Consumer receives. I found that the ACK message was in small form, but the actual message was not in streaming messages. This was because we never really tried to convert streamed messages into small messages before.
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingAMFEndpoint.java
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/StreamingHTTPEndpoint.java

AppleTV not working with Yamaha AV Receiver

Similar Messages

Maybe you are looking for