Appletv out put to audio and video

Hi
Have an ATV2 and have the HDMI going to tv. Sorted, lovely.
Am going to get a BOSE sound bar under the telly, and I want to connect the ATV to the TV and the sound bar so that I can play iTunes music throu AirPlay to the ATV in the lounge without having the TV on to listen to it.
Can I connect via optical to the Bose and avoid the TV when playing music, and still have iTunes movies watched through the TV with correct sound too?
Hope that is clear, ideas please
M

You would be able to play music through the Bose soundbar with TV off, if it's connected via optical. However, you can't have two separate things being output (i.e. music through bose and movie on TV)

Similar Messages

How do I fix out of sync audio and video on my ipad2?

How do I fix out of sync audio and video on my ipad2? The version is iOS 7.1.2

In what app?
Have you restarted or reset the device?

SUBCLIP CREATES OUT OF SYNC AUDIO AND VIDEO

I have a problem which I hope someone out there can help me solve. I just recently upgraded to FCP 6.0.4.
In attempting to create a subclip, I follow these steps: set in and out points for the clip on the timeline, select the video and audio, link the clip's video and audio, double click the clip from timeline to bring subclip into browser, make subclip (modify > make subclip).
After naming the subclip, I double click on it to bring it into the browser for viewing. Here's where the problem comes in.
The duration of the subclip is always much too long. I noticed that the subclip's in point is always incorrect. It is always the starting timecode of the audio from the timeline (e.g. 00:01:05:00). The ending timecode is always correct though (i.e. the out point).
The subclip plays the audio at the beginning of the clip, but the video is blacked out until the very end of the subclip, at which time the audio is silent as it has already played out.
Does anyone know why I'm getting these bizarre subclips and what I need to do to correct this problem?
Your help is much appreciated.

In what app?
Have you restarted or reset the device?

How do I make a dvd in iDVD out of the audio and video files from Compressor 4?

I created two video files in fcpx and compressed them using the dvd source in compressor 4 which ended me up with a set of a separate video and separate audio file for each video. I want to take these files into iDVD and create one movie file with these two videos. How do I reconnect the separated video and audio files in iDVD? Thanks!

tell me what software they used to achieve this.
iDVD.
Apple sells iDVD on disk as part of iLife 11.
Yes, there are programs that will put a movie on a DVD. I have tried most of the other substitutes including Toast, Burn, and others. None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.
With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
IDVD remains a popular application in the Apple community. For a variety of obvious reasons Apple would prefer your movies to be stored on the cloud. Many people however prefer to have a physical copy, that they can possess, that is easily playable on over 700 million DVD players worldwide.

Why do my audio and video start in sync, then quickly go out of sync?

I've just installed Windows 8 and also purchased Premiere Elements 12.
I've also got Windows movie maker.
When I play my clips in Premiere Elements, they audio and video start of synced, but quickly go out. This doesn't happen with Windows Movie Maker and I had trialed some NCH video editing software also and didn't have that problem.
can someone tell me what I need to do to get this working right?

MASMAS
The first thing that we need to know are the properties of what you are putting on the Timeline. What works in another software does not necessarily work in Premiere Elements. Each program has its own supported formats.
a. What is the file extension for this file? .MOV or .MP4?
b. Does the iPad describe it as 1080p or 720p?
c. If you open Premiere Elements 12 and go to Edit Menu/Project Settings/General, what do you see for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if those field appear to be grayed out.
Two immediate troubleshooting avenues are going to be in the direction of...
a. Project settings not set up to match the properties of the source from the iPad. Then we would start a new project and set the project setting manually before importing your video. Details for manually setting the project preset are in the following.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
b. The iPad video being recorded with a variable frame rate instead of a constant one...the remedy then would probably be to take your video in a program like HandBrake to change the variable to a constant frame rate. And after that, import the corrected video into the Premiere Elements project which has the correct project preset (preferably set manual to assure the correct result).
Please see what you can put together in the way of video details, and we will sort this out.
Thanks.
ATR

My audio and video are in sync, but get out of sync as it goes along?

I recorded an audio file on Garageband and I am trying to line it up with a iMovie video. At first, the audio and video sync up perfectly, but as the video goes along, a delay starts to appear and grows bigger and bigger. Anybody has a solution?

MASMAS
The first thing that we need to know are the properties of what you are putting on the Timeline. What works in another software does not necessarily work in Premiere Elements. Each program has its own supported formats.
a. What is the file extension for this file? .MOV or .MP4?
b. Does the iPad describe it as 1080p or 720p?
c. If you open Premiere Elements 12 and go to Edit Menu/Project Settings/General, what do you see for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if those field appear to be grayed out.
Two immediate troubleshooting avenues are going to be in the direction of...
a. Project settings not set up to match the properties of the source from the iPad. Then we would start a new project and set the project setting manually before importing your video. Details for manually setting the project preset are in the following.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
b. The iPad video being recorded with a variable frame rate instead of a constant one...the remedy then would probably be to take your video in a program like HandBrake to change the variable to a constant frame rate. And after that, import the corrected video into the Premiere Elements project which has the correct project preset (preferably set manual to assure the correct result).
Please see what you can put together in the way of video details, and we will sort this out.
Thanks.
ATR

Why, after three months of apple tv working perfectly fine, is it now cutting out constantly and the audio and video out of sinc?!@

Why, after three months of apple tv working perfectly fine, is it now cutting out constantly and the audio and video out of sinc?

Playing rentals, Netflix, from local iTunes, other?
Firstly restart router and AppleTv after unpowering to see if that helps - may or may not but quick and easy to try.
Connection via ethernet or wifi? If wifi are there any new devices in the house which may be causing interference or new neighbouring networks? If feasible try to eliminate wifi issues by using an ethernet connection.
AC

Audio and video is out of sync!

when I record audio and video together with my isight built in camera on my macbook pro with either quicktime pro, photobooth or imovie, when I play the clip back the audio and video is out of sync! like watching a kung foo movie. I've tried everything, I've taken my book into see a "Genius" at thew mac store and he said to me that the isight is made really for video conferencing and is really not supposed to be fully in sync? Uhh thats weird, so mac makes a product and puts it on all their laptops and it only sort of works?? I've been on the phone with apple care, did a bunch of things like disk utility repairs on permisions, then used the startup disk to do another permisions repair. I've uninstalled quicktime pro and re-installed it a couple of times? If anyone could give me some advice that would be great! I'm a little frustrated as you can probably see! thanks
cheers
m

Welcome to Apple Discussions, m
See if any of the suggestions offered here reduce your sync quality problem enough:
http://discussions.apple.com/thread.jspa?messageID=7089133&#7089133
If, after making certain that your Mac is running well, has plenty of free space on the correct drive, etc., your sync is still not close enough, you can manually re-sync any parts that are unacceptable to you using either QT Pro or iMovie.
If you check carefully, you will see that not even pro video is always perfectly synced. It is a lot of work to get things "nearly perfect," but, with a bit of practice, it doesn't take long to get things "close enough" for me.
I use the same simple process with either QT Pro or iMovie, so you can use whichever you find easiest. Whichever you use, keep the original AV clip safe and *_work on a copy_* in case something goes wrong.
If you do not already know how, here is my process, but you can adjust for your workflow:
(1) Copy of the audio track.
(2) Add the audio track copy to the AV file.
(3) Silence the original audio and work on audio copy.
(4) Insert small blank audio clips (or split and slide if using iMovie) if needed to make the audio later.
(5) Cut small bits out of quiet parts (or split and shorten in iMovie) if needed to make audio sooner.
(6) Repeat until satisfied and delete any tracks no longer needed.
(7) Save the adjusted AV file.
(8) Enjoy!
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.7) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Why do my audio and video get out of synch?

No matter what sort of video I'm trying to play: Youtube, a movie on DVD, a movie on an external hard drive, etc, after a short time the audio and video get out of synch with each other. This is often, though not always, signaled by a short audio phrase being repeated (eg: "I don't know, Scully, how about you? about you?"). I can solve the problem by quitting the app and starting it back up but it will eventually screw up again.
I'm using a MacBook running OS 10.6.8 with a 2.26 GHz Intel Core 2 Duo processor and 4 GB 1067 MHz DDR3 memory.

MASMAS
The first thing that we need to know are the properties of what you are putting on the Timeline. What works in another software does not necessarily work in Premiere Elements. Each program has its own supported formats.
a. What is the file extension for this file? .MOV or .MP4?
b. Does the iPad describe it as 1080p or 720p?
c. If you open Premiere Elements 12 and go to Edit Menu/Project Settings/General, what do you see for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if those field appear to be grayed out.
Two immediate troubleshooting avenues are going to be in the direction of...
a. Project settings not set up to match the properties of the source from the iPad. Then we would start a new project and set the project setting manually before importing your video. Details for manually setting the project preset are in the following.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
b. The iPad video being recorded with a variable frame rate instead of a constant one...the remedy then would probably be to take your video in a program like HandBrake to change the variable to a constant frame rate. And after that, import the corrected video into the Premiere Elements project which has the correct project preset (preferably set manual to assure the correct result).
Please see what you can put together in the way of video details, and we will sort this out.
Thanks.
ATR

Audio And Video out of sync in Final Cut, but not in quicktime

I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
This is what I did to attempt to fix the problem:
- Check drives using disc utility and repair permissions
- Remove Final Cut Preferences using Apple guidelines
- Switch hard drives
- Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
- reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
- switch ram slots, and even replace ram with different sticks from another G4 machine
None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
Thanks

For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
Editing in FCP 6.0.2
QT was just updated to 7.3.1 the other day (hmm)
On an MacBookPro machine, OS 10.5.1
Software updater says everything's up to date of course.
DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
Grr,
Nicole
Editor, RHED Pixel

Audio and Video out of Sync in Encore 2.0

Here's my issue:
I opened a project in Encore 2.0 that was an Encore 1.5 project. I have one timeline with a 2 hour movie and the AC3 audio file that goes with it. Encore 1.5 played the audio and video in sync from the timeline and burned discs with the audio in sync. The video is an MPEG2 file encoded at a 3.1 constant bit rate.
In Encore 2.0, when I play the timeline, the audio becomes progressively out of sync as it plays. Within the first few minutes it's maybe a frame or 2 off. By the end of the film it is about 18 seconds off (audio is playing ahead of the video).
Is this a result of Encore 2.0 conforming the audio file? If so, how am I (or anyone) supposed to attain sync between video and audio in Encore 2.0?
I have Encore 1.5 and 2.0 both installed on the same machine. As a test, I opened the project in 1.5 and played it, everything was fine. I closed Encore 1.5 and opened the project in Encore 2.0, and the audio is out of sync.
Any comments, ideas or suggestions?
Mike

Joe,
I tried creating a project with the original WAV file and it's corresponding video and found that the audio and video were still out of sync. I did a little more testing and discovered that the audio is actually being played correctly, it's the video that is not being played correctly. Here's what I did:
I opened the WAV file version of the audio file in Premiere Pro and noted where a hammer hit in the video occurs (01;40;30;28). I then opened Encore 2.0 and imported the video and AC3 version of the WAV file, placed them in a timeline and the audio's hammer hit is right where it's supposed to be (01;40;30;28), but the video's hammer hit occurs at 01;40;43;18.
Next I went into Encore 1.5 and brought in the AC3 audio and video files and placed them on a timeline. I went to 01;40;30;28 in the timeline and the audio and video were both at the frame they should be at that timecode.
Seeing how the video appears to be playing incorrectly, here's some info on my video files:
I have 4 versions of the same film in varying encode rates with the same start and end timecodes. All four files were encoded on a Sonic DVD Creator authoring station using hardware to encode. The files are encoded at the following rates: 2.9 constant bit rate, 3.1 constant bit rate, 3.4 variable bit rate and 4.0 variable bit rate. They are each NTSC with drop frame timecode. All four files play correctly in Encore 1.5 but incorrectly in Encore 2.0.
This almost seems like a drop frame/non-drop frame issue. Do you have any ideas?
Mike

Audio and video out uf sync

I'm using Premier elements 12. When I open a VOB file, the audio and video are not in sync. I can open that same file with windows media player and all is well. What do I need to do with respect to editing a file like this?
The information about the display on my computer is:
Name NVIDIA GeForce GT 220
PNP Device ID PCI\VEN_10DE&DEV_0A20&SUBSYS_069A10DE&REV_A2\4&22063C0D&0&0018
Adapter Type GeForce GT 220, NVIDIA compatible
Adapter Description NVIDIA GeForce GT 220
Adapter RAM 1.00 GB (1,073,741,824 bytes)
Installed Drivers nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version 9.18.13.3523
INF File oem38.inf (Section002 section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1920 x 1080 x 60 hertz
Bits/Pixel 32
Memory Address 0xFA000000-0xFAFFFFFF
Memory Address 0xD0000000-0xDFFFFFFF
Memory Address 0xCE000000-0xCFFFFFFF
I/O Port 0x0000EC00-0x0000EC7F
IRQ Channel IRQ 16
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Thanks,
Pete Blair

Pete Blair
In all your information, I did not see what computer operating system your Premiere Elements 12 is running on? Have you updated 12 to the 12.1 Update, using an opened project's Help Menu/Update? If not, please do so.
Your issue may relate to the details of your "VOB file" and how it was ripped/copied from the DVD-VIDEO and DVD disc to get it into a Premiere Elements project.
a. project preset set for NTSC DV Standard or NTSC DV Widescreen (whichever corresponded to your recording details)...or PAL equivalent.
b. DVD disc in burner tray
c. Add Media/DVD camera or computer drive/Video Importer/.....
It does not happened often, but if audio is out of sync and you are not using the above route, then consider the Command Prompt way described in the
following
ATR Premiere Elements Troubleshooting: PE: DVD-VIDEO/Seamless VOB Ripping
A just in case note, contrary to some, it is not necessary to convert VOB (VTS_01_1.VOB video file and any files in that series) to any other format in Premiere Elements.
Please review and consider and then we can decide what next.
Thank you.
ATR

Audio and Video out of Sync after Pro Res export

I´m getting an audio/video sync issue when I´m exporting to Pro Res.
I started off in a HDV1080i50 sequence. Audio sampling rate is 48khz. (16 bit depth)
The sequence is less than 20 minutes long. It plays correctly on the timeline.
When I export the sequence for DVD and view it on a set top it plays absolutely fine.
When I export the video to ProRes (422 HQ - I used Export using Quicktime Conversion) and the audio to AIFF, they quickly go out of sync. This was brought to my attention first by the guys who were making the DigiBeta master, and when I view the exported material in a Pro Res sequence I can see it for myself.
The audio and video clips are of the exact same duration.
Possible issues...
Some of the narration was recorded at 44.1 khz. I didn´t resample it (I´m still a learning novice..).. but if that is the issue should it not have affected the DVD as well? All the other audio in the project is 48khz.
Most of the material is HDV1080i50..but one clip used was originally an NTSC clip and therefore a different frame rate. However I converted it to a 25fps clip and this is reflected in the vid rate column in the browser where it says 25fps.
Final point, the exported AIFF files..when I import them back into the HDV1080i50 sequence and play back, it is perfectly in sync.
Any help would be greatly appreciated.

First, yes resample the narration to 48k 16 bit. You will probably be able to reconnect to the resampled files. Usually works for me. That's a simple fix and will probably solve the problem. If it doesn't, you can try to change the codec (compressor) in the sequence settings to prores 422HQ, fully render and see if that solves the problem.
Wait, just reread your original post. Export from fcp using file: export: quicktime movie NOT quicktime conversion with current settings. If that works without synch issues, use compressor to convert to prores.

Audio and video out of synch on export

Hi,
I've searched the forum for this. I have a movie in FCE 4 in which the audio and video are in synch in the time line. The audio was recorded into Logic at 96, noodled, passed into FCE at 48 and then had to be lined up with the video. Then when I go to export, the resulting QT movie is out of synch, the audio now about one second before the video. I'm using QT conversion. My compresson is H.264, quality best, frame rate 30, multi-pass, 640 x 480, format AAC or linear PCM, various sample rates, stereo and mono etc. I've tried various other settings for export, but the problem remains.
What am I doing wrong? Many thanks for any help,
Ray

Hi,
Thanks for the reply. I think you're on the right track. I want the best sound possible, so I record into Logic, knowing I'm going into FCE I record at 96 so an even multiple down to 48. I think a .wav file though, and maybe that's the problem. Into FCE, but other audio there as well from the camera mic, and which I occasionally include in the sound track for ambience. All of this noodled a fair amount and then exported, the intent being to end up in 44, as it will be uploaded to youtube. I switch to 16 bit out of Logic, but the aiff vs wav may be the problem. Do think there might be a better way to do this?
Ray

Audio and video out of sync after import

I'm trying to bring some H.264 video into a Premiere project. But when I place it in a sequence (a sequence that is created based upon this very clip), the audio and video are about a second out of sync. (It's also odd: no amount of adjustment will bring them in sync. Seemingly the video is running at some variable rate that makes synchronization impossible...?)
As a test, I tried bringing my video into iMovie, and it works just fine there. But I don't want to use iMovie: I want to use Premiere.
Any ideas?

Thanks. Here's the output:
General
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 1.05 GiB
Duration : 51mn 20s
Overall bit rate mode : Variable
Overall bit rate : 2 937 Kbps
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Writing application : HandBrake 0.10.1 2015030800
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 51mn 20s
Bit rate : 2 606 Kbps
Width : 720 pixels
Height : 478 pixels
Display aspect ratio : 4:3
Frame rate mode : Variable
Frame rate : 24.145 fps
Minimum frame rate : 0.167 fps
Maximum frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.314
Stream size : 957 MiB (89%)
Writing library : x264 core 142 r2479 dd79a61
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=18 / lookahead_threads=3 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=240 / keyint_min=24 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=62500 / vbv_bufsize=78125 / crf_max=0.0 / nal_hrd=none / filler=0 / ip_ratio=1.40 / aq=1:1.00
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Color range : Limited
Color primaries : BT.601 NTSC
Transfer characteristics : BT.709
Matrix coefficients : BT.601
Audio #1
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 51mn 20s
Bit rate mode : Variable
Bit rate : 132 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 47.9 MiB (4%)
Title : Stereo / Stereo
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Audio #2
ID : 3
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : ac-3
Duration : 51mn 20s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 70.5 MiB (7%)
Title : Stereo / Stereo
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Menu
ID : 4
Codec ID : text
Duration : 51mn 20s
Language : English
Encoded date : UTC 1904-01-01 00:00:00
Tagged date : UTC 1904-01-01 00:00:00
Bit rate mode : CBR
00:00:00.000 : Chapter 2
00:01:50.877 : Chapter 3
00:03:59.218 : Chapter 4
00:13:26.285 : Chapter 5
00:20:57.685 : Chapter 6
00:32:58.489 : Chapter 7
00:39:14.031 : Chapter 8
00:50:51.611 : Chapter 9

Appletv out put to audio and video

Similar Messages

Maybe you are looking for