Appletv will not repeat a video playlist more than 3 times via AirPlay

Trying to AirPlay a video playlist from my laptop to apple tv and have it repeat.
It repeats on laptop but will only repeats a few times on apple tv then stops and goes to appletv menu

Both in-coming and out-going.
Went through all the advanced settings with MediaTemple.
They said everything is set up correctly.
Again, the exact same username and password combination work perfectly when used to login via webmail.
The same settings work perfectly to login to the same account via my MBP.
I am only having problems with this IMAP account on my iPhone.
Because the same username and password combination work perfectly on webmail,
MediaTemple therefore says it's an Apple problem and sends me to ask Apple.
I acknowledge it very well could be a problem on the server side, saying there's no problem with any iPhone and IMAP because you've had no problem with the iPhone with IMAP is pretty rich. Googling iPhone and IMAP problems pulls up a lot of results, many of them leading to other people having various problems here in these very support forums. The most infuriating response is when you talk to the hardware/software vendor (here), they always say, "no problem on our end, talk to your service provider" and when you talk to the service provider they say, "no problem on our end, talk to Apple." And everyone just points fingers at the other guy.

Similar Messages

Firefox will not load pictures, videos or more than one tab at a time. Help!

Hi there,
I have reinstalled Firefox 3.6 a few times, but it doesn't seem to fix the problem. When I try and load a site with pictures, videos (such as YouTube, but including a blog post with pictures), or more than one tab at a time, I just get "Untitled" tabs that don't even register the address. This happens especially when clicking to open a link in a new tab from a Google Reader.
At this point too, a lot of pages will not load correctly; even Firefox Help as it turns out!

Sorry there is no telephone support. You could try the IRC if you want a quick response, ( whilst it is [https://support.mozilla.com/en-US/kb/ask open] )
Firefox 4 is not supported, but firefox 3.6 is
* see [[installing a previous version of firefox]]
There is a change to a preference which may help, post back with more details of your problems please.

TS1424 I need a new Battery for my I POD. I POD will not hold a charge for more than 10 songs. Model # = M9800LL - Version = 1.4.1

I need a new Battery for my I POD Touch. I POD will not hold a charge for more than 10 songs.
Model = M9800LL
Version = 1.4.1

The battery in the iPod is not user-replaceable. Take your iPod to an Apple Store or contact Apple Support and they can arrange replacement.
http://www.apple.com/support/ipod/service/faq/
Regards.

Not able to load pages more than 3 times continuosly

Hi
JDeveloper 11.1.1.6, BPM/SOA 11.1.1.6, WLS 10.3.6, Database : MS SQL Server 2008 R2
I am not very sure if it is related to BPM or ADF, but it looks more like an ADF error..
We have a BPM process with some human tasks. The human tasks pages are ADF pages.
The pages / user tasks are opened properly for a few times, but does not load after that, until we close all the browser windows.
I am getting these errors intermittently whenever I try to open a human task page in the BPM Workspace.
(Common observation is that for the first few times the pages open properly. After more than 3+ times of opening the same task repeatedly, I a getting these 2 errors).
The page stops rendering after the last text '<div' tag.
Following are the 2 exceptions we see in the logs of the server.
We are using MS Sql Server 2008 R2 for database.
I tried with both Type 4 XA and Non XA versions of the JDBC Connections, but still getting the same error messages.
Can anyone please let us know if we might be missing anything.
Thanks for any help.
Sameer
Exceptions
####<Nov 1, 2013 12:32:34 PM EDT> <Info> <JDBC> <localhost> <BPM_MY_server_2> <[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <6e6476ca04c34712:23175e39:14213d8a6b8:-8000-0000000000025615> <1383323554494> <BEA-001128> <Connection for pool "MYDS" has been closed.>
####<Nov 1, 2013 12:32:34 PM EDT> <Info> <JDBC> <localhost> <BPM_MY_server_2> <[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <6e6476ca04c34712:23175e39:14213d8a6b8:-8000-0000000000025615> <1383323554497> <BEA-001128> <Connection for pool "MYDS" has been closed.>
####<Nov 1, 2013 12:38:37 PM EDT> <Info> <ServletContext-/workflow/MYProcessesUI> <localhost> <BPM_MY_server_2> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <E5OI> <> <6e6476ca04c34712:23175e39:14213d8a6b8:-8000-0000000000025eec> <1383323917256> <BEA-000000> <JspServlet error: Servlet unable to dispatch to the following requested page: The following exception occurred:oracle.jbo.common.ampool.ApplicationPoolException: JBO-30003: Application pool com.dso.publicModel.applicationModule.CostReportInstanceAMLocal fails to check out an application module due to the following exception:>
####<Nov 1, 2013 12:38:37 PM EDT> <Error> <HTTP> <localhost> <BPM_MY_server_2> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <6e6476ca04c34712:23175e39:14213d8a6b8:-8000-0000000000025eec> <1383323917268> <BEA-101017> <[ServletContext@1068542008[app:MY module:/workflow/MYProcessesUI path:/workflow/MYProcessesUI spec-version:2.5]] Root cause of ServletException.
java.lang.IllegalStateException: Attempt to validate an already invalid RegionSite:
                at oracle.adf.view.rich.component.fragment.UIXRegion$RegionSiteImpl.validate(UIXRegion.java:993)
                at oracle.adf.view.rich.component.fragment.UIXRegion$RegionContextChange.doChangeImpl(UIXRegion.java:1198)
                at oracle.adf.view.rich.context.DoableContextChange.doChange(DoableContextChange.java:91)
                at oracle.adf.view.rich.component.fragment.UIXRegion._beginInterruptibleRegion(UIXRegion.java:693)
                at oracle.adf.view.rich.component.fragment.UIXRegion.encodeBegin(UIXRegion.java:283)
                at javax.faces.component.UIComponent.encodeAll(UIComponent.java:929)
                at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:406)
                at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
                at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
                at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderChildrenAfterHelpAndInfo(PanelHeaderRenderer.java:542)
                at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer._renderContentCell(PanelHeaderRenderer.java:1067)
                at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderContentRow(PanelHeaderRenderer.java:490)
                at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.encodeAll(PanelHeaderRenderer.java:231)
                at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
                at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
                at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
                at javax.faces.component.UIComponent.encodeAll(UIComponent.java:938)
And
[2013-11-01T12:17:08.807-04:00] [BPM_MY_server_2] [NOTIFICATION] [J2EE JSP-00008] [oracle.j2ee.jsp] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sdarbha] [ecid: 6e6476ca04c34712:23175e39:14213d8a6b8:-8000-0000000000023fb4,0] [APP: MY] unable to dispatch JSP page: The following exception occurred:.[[
JBO-30003: Application pool com.dso.publicModel.applicationModule.CostReportInstanceAMLocal fails to check out an application module due to the following exception:
java.lang.ClassCastException: weblogic.jdbc.wrapper.PoolConnection_weblogic_jdbc_sqlserverbase_ddah
                at oracle.jbo.server.OracleSQLBuilderImpl.setSessionTimeZone(OracleSQLBuilderImpl.java:5533)
                at oracle.jbo.server.DBTransactionImpl.refreshConnectionMetadata(DBTransactionImpl.java:5311)

Hi,
depends on whether you control the BPM task flow or not. If you do, have a look at this thread for how to debug the problem
How to debug "Attempt to validate an already invalid RegionSite"?
Otherwise, post it to the SOA forum if this is initiated by their generated code. The most common reason though is that the task flow lacks a default activity. So if the default activity is somewhat calculated dynamically in your application then this may be a reason
Frank

ReturnEvent not get called after search more than 10 times in LOV page

hi there,
I using ADF and Jdeveloper 10.3.1.2
In my project I have a form which called a LOV page for selecting multiple records and submit button sumup the values of each selected row of LOV and return to the main form and display added value on text field.
problem is when I search records more than 10 times or more I put search criteria and select row on each time. After click on submit the value of each row is sum up return on the main form but it not reflected on main form because ReturnListener not get called .
But when I select many rows more than 10 without searching then the ReturnListener get called when it returning on main form.
So should I do so that ReturnListener get called.
Is it any bug of ADF or Jedeveloper .

Hi,
depends on whether you control the BPM task flow or not. If you do, have a look at this thread for how to debug the problem
How to debug "Attempt to validate an already invalid RegionSite"?
Otherwise, post it to the SOA forum if this is initiated by their generated code. The most common reason though is that the task flow lacks a default activity. So if the default activity is somewhat calculated dynamically in your application then this may be a reason
Frank

ITunes will not allow me to authorize more than 5 computers.

I'm getting this message ob my new iMac from iTunes. You cannot authorize more than 5 computers.
You have already authorized this computer you must first deauthorize one of the computers. I did that with my old computer. did a clean install on other with Mac OS X. Anybody can help would be appreciated. Thank you for looking.

If you go to your account under the Store menu in iTunes - you will have the option to deauthorize all machines (if you do have 5 authorized). I think you can only do this once a year. Then you need to authorize the machines you still use.
A clean install does not do anything to the authorization, it's stored on your account at the iTunes store.

Business Catalyst will not allow me to add more than 11 items to Web Map? Is there any fix for this?

Basically I cannot add more than 11 items on to a web app map. If I add more than 11 than the rest of the items appear of the coast of Africa for some reason. I am not sure why this happens but I was wondering if anyone else has had a similar problem and found a fix.

Basically I cannot add more than 11 items on to a web app map. If I add more than 11 than the rest of the items appear of the coast of Africa for some reason. I am not sure why this happens but I was wondering if anyone else has had a similar problem and found a fix.

ITunes will not allow me 2 add more than 3 songs at one time in2 my library

iTunes won't allow me to add more than 3 songs at one time into my library. I just want to select a number of songs in 'My Music' folder on my pc and then add them in one go. I used to be able to on older versions of iTunes, but now it will only let me add 3 songs (using the 'add file to library' option), and no more then one (using the 'import' option). It's just very annoying as it takes aaages to add songs into my library, when it shouldn't. if anyone knows how to overcome this, please let me know! Thanks
Message was edited by: 5Gmel

how did u do it i've being trying for a long itme now and it takes forever to add music please share

Since going on 10.9.1 when i try to forward mail it will not let me forward to more than one person when i try to add an additional name it goes to the name and eliminates the first one

since going on 10.9.1 i can not forward email to additional persons it erases the first name when i add an additional name

Hi edwynn!
Here is an article that will help explain to you how to do this:
Mail (Mavericks): Address messages
http://support.apple.com/kb/PH14922
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Will not allow me to capture more than a few seconds at a time, with correct settings?

I'm trying to edit a wedding video and the program will only import a few short seconds before stopping import and creating another clip. I'm using a 15 inch 2011 macbook pro, and a canon XL2

Cannot start DV or HDV video capture in Premiere Pro CS4 or later

Router will not allow PC to filter more than once

I've been using the Restrict Access MAC filtering for awhile. For some reason, however, the router (BEFW11S4 v.4) will only allow a computer to edit the access list once. After that access, clicking on the "Edit Access List" will yield no response, not even an error message. This has been the case with two or three different Mac computers, a PC, and an iPod Touch. Beyond resetting the router and reentering all the MAC addresses (of which I'm tiring), do you have any suggestions? I can't find any other anecdotes or information on this problem. We've had this router for several years; should it be replaced? Thanks...
Solved!
Go to Solution.

Yes, I've tried from PC and Macs, even from an iPod Touch– all the same result: one access per computer.
BUT...For some reason, today was the magic day. Firmware updated. I'm guessing that the previous firmware (from 2003) was the reason for my access problems. I have always had issues upgrading firmware in the past though.
I am very grateful for your help. This has been bugging me for a long time.
Many thanks!

Yesterday Encore worked fine today it will not open any old project more than 13% before crashing.

A project i create today with no content will work fine and a project i create today with a dynamic link will work fine any ideas why this won't work?

Stan Jones wrote:
What is your source for the acx file? I don't understand the question?
Encore project files do not use an xml structure. Just curious.
I got it from the folder of the encore project
What happens if you start the project over? New projects work fine
Encore sometimes requires a do over. If simpler methods (delete preferences file) does not do the trick, you can temporarily rename/move the transcodes one at a time (if transcoded; the PR project if not), use "skip" when prompted for missing things, to see if that allows you to open. Also, recreating it and seeing if the problem recurs may help you understand where the problem is. You can copy the Encore project file and directories as a backup (since you can't use save-as).
how do i delete the preferences file? also this is happening on ALL of my older projects so i think the problem is with Encore and not to the project.
Can you get all the DLs in? DL? do you mean dynamic link?
Yes, can you get all the DLs into a new project?

HT204053 what will happen to my Apple ID more than 5 Times?

I have formatted my PC and installed windows 4 times since I used the iTunes and my apple ID. every time I install a new windows,iTunes says ...1of 5 times .. ,4 of 5 times. recently I Installed windows 8 and I have the last time for my Apple ID register in my PC. what will happen to it after that?
especailly when I want to buy a mac book.. can I use my Apple ID then in the iTunes????please help me.

Individual computers (and when you format a computer then it effectively becomes a 'new' computer) can only be deauthorised directly on them, but if you have 2 or more computers authorised then you can log into your account on your computer's iTunes (Store > View My Account) and 'deauthorise all' (which you can do once every 12 months) and you can then authorise/reauthorise the computers that you still have and need : authorising and deauthorising.

Burning a playlist more than 7 times

I am compiling a monthly "motivational" CD for my company with a mix of motivational songs and podcasts relating to our industry. I need to burn 50 copies and understand that songs purchased through itunes can only be burned 7 times. Is there a way that I can pay to create and burn what I need 50 times?

I need to burn 50 copies and understand that songs purchased through itunes can only be burned 7 times.
That restriction applies to songs that are copy-protected with Apple's DRM scheme. It does not affect non-protected iTunes Plus purchases.
Is there a way that I can pay to create and burn what I need 50 times?
That question actually raises some legal questions and, generally speaking, this isn't the best place to come for legal advice.
With that disclaimer in mind, please consider the following on a "for what it's worth" basis.
Among the Terms of Service agreed to in opening an account with the Music Store are a number of Usage Rules, in particular:
(ii) You shall be authorized to use the Products only for personal, noncommercial use.
(vii) You shall be entitled to export, burn (if applicable) or copy (if applicable) Products solely for personal, noncommercial use.
(various emphases added)
I don't know about the noncommercial part but it seems to me your proposal goes against the "personal" part of the above usage rules.
If that's London, England you're posting from, over there in the UK you have an organization PRS for Music. It might be worthwhile checking with them to see if they're able to grant a license for you to use the songs as you propose to.
http://www.prsformusic.com/productionmusic/Pages/default.aspx
http://www.prsformusic.com/musicforproducts/Pages/default.aspx
Final Disclaimer: you need a real lawyer to give real legal advice; no part of this post constitutes real legal advice.

HT1595 My AppleTV will not load and hold streaming video

My Apple TV will not load streaming video such as Netflix etc. All appears to be going well until we get to the 'PLAY' button. When 'PLAY' is hit it looks as if it is going to load the content. However, as soon as the content starts to play the msg: "An error has occurred loading this content - try again later" appears. No matter how many times you try to repeat - you may get 5 sec, 5 minutes but it will then come up with the error msg and force you to recycle to resume where the content crapped out. WHAT IS HAPPENING? Is it some setting? Is it download speed (we have 10mbps on the computer which is on the same wireless network as the Apple TV)?
Appreciate any help I can get.
Thanks
Rich

In streaming content you must go to Source in the ATV menu and choose the library you want to stream from. Are you doing this? You will not see the ATV on your computer, only vice versa (IOW, with iTunes open on that computer you should not see the ATV as a device -- if you do, disable "Look for Apple TV" in the menu as that may be preventing you from streaming from it).
If you choose the source as your other computer's library and after entering code cannot stream then see this:
http://docs.info.apple.com/article.html?artnum=305287

Appletv will not repeat a video playlist more than 3 times via AirPlay

Similar Messages

Maybe you are looking for