AppleTV with AAC+AC3 and Multi Languages

Hi!
I've an Apple TV, and I have succeeded to have AAC + AC3 in a single movie, thus allowing me to play it with 5.1 surround in my receiver.
However, I would like to have another language at the same movie.
According to this article, http://support.apple.com/kb/HT1755, you can have AAC + AC3, but it doesn't mention if it is possible or not to have more tracks.
So, now with Apple TV 2.2, I can push and hold play/pause for options during the movie play, and that allows me to choose a new chapter or new audio tracks.
I created a movie1.m4v, with the following characteristics in "Show Movie Properties" of QuickTime:
movie1.m4v
Video Track - H.264
Stereo - AAC (English)
Stereo - AAC (Portuguese)
Text Track - Text (chapter marks)
It works perfectly!
Now, let me try the AC3 with a single language:
movie1.m4v
Video Track - H.264
Stereo - AAC (English)
Surround - AC3 (English)
Text Track - Text (chapter marks)
Works perfectly too! I can have dolby digital surround in my receiver!
Time to add the second language with AC3:
movie1.m4v
Video Track - H.264
Stereo - AAC (English)
Surround - AC3 (English)
Stereo - AAC (Portuguese)
Surround - AC3 (Portuguese)
Text Track - Text (chapter marks)
Chaos! None of the AC3 tracks works, even though Apple TV allows me to choose the track through play/pause options. The AAC for English and Portuguese works, but none of the AC3.
So, the question is: is it possible to have multiple languages with AAC + AC3 in a single movie and be able to play it on AppleTV?
Thanks! =)

i got the same result... don't know what the deal is..

Similar Messages

  • I am trying to install Appletv with an iPad2 and cannot get Homesharing to work

    I am trying to install Appletv with an iPad2 and cannot get Homesharing to work

    Homesharing only works with computers. If your using an ipad you want to use Airplay instead.
    http://support.apple.com/kb/ht4437?viewlocale=de_de&locale=de_de

  • Win 8.1. Core language and multi-language support.

    HI,
    I've used a US developed program with multi-language support for years in Win XT and Win 7. As the program now supports win 8.1. I've upgraded to 8.1. and the new release of the program. However it will not work properly and the reason given is
    that my version of 8.1. has a different core language compared with what  the program uses and this version is not multi-language supported. Now I wonder if there are various versions of  the core language in 8.1. or is the core
    language unique, supported by various language packets for menu's, guiding texts, etc.  Why do I then need a multi-language supported program? Where can I put this question?
    Regards
    Sverre

    I'd probably try them here.
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=fsharpgeneral%2Cvcgeneral%2Cvbgeneral%2Ccsharpgeneral%2Cwindowsgeneraldevelopmentissues&filter=alltypes&sort=lastpostdesc
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Screen dims and multi-language "restart" message appears

    Currently, every time Safari is used, the entire screen dims and a multi-language (German, Chinese, etc.) message comes on the screen saying that I must physically power down my machine and restart. No error message is given, nor are any other options allowed, as the keyboard and mouse are rendered useless.
    I have rebooted the machine several times, including powering down the cable modem, but the problem persists.
    This problem has occurred in the past, but seemed to clear itself, only to reoccur starting yesterday (23 Sep 05). I can't shake the feeling that this problem is more in the OS X arena than in Safari's, but testing does not seem to bear out my feelings - all other installed applications appear to run properly and this phenomenon of screen dimming with forced power down and restart does not occur with other applications.
    Any thoughts? Thanks! Bob Meyer.

    I suggest the following:
    Repair the Hard Drive and Permissions - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    If you continue to have the problem, then reinstall the OS X Mavericks 10.9.2 Update (Combo) updater.

  • Can I use home sharing for AppleTV with Time Capsule and have my iMac powered off?

    I wish to be able to use AppleTV without having my iMac powered on.  Is there a way to have my iTunes library on my Time Capsule so I can use AppleTV directly from it?

    I use an external hard drive with my iMac and have an iTunes folder there (that sometimes it points to automatically, but sometimes I have to go under advanced and show the iMac to use that iTunes folder because it defaults to the internal iTunes folder on the computer).
    Make sure the external drive is powered on and mounted on the desktop before launching iTunes.

  • Multi-Currency and Multi-Language

    Hello,
    What issues does an ABAP developer need to be concerned about when programming objects that involve multiple currencies and multiple languages?
    Rae

    Hi Rae,
    Can't think of many but few that comes to my mind spontaneously are:
    1. When reading data such as texts, make sure you pass language key.
    2. Translate each and every text (in scripts, smartforms, data element labels, documentations etc to all the language, use the same logon language in which you want to maintain and test.
    3. Currencies should not be much of a problem but if you have to make a lot of calculations, make sure you do them with dimensional consistency, for examply JPY doesn't have decimals!
    I would like to watch this thread to learn more.
    Thanks,
    Aabhas

  • 1st Generation AppleTv with red images and disconnecting

    Hello,
    My AppleTv has been working with absolutely no problems until today. I went to turn it on and the tv blinked from static to black every few seconds. I pushed the Menu button on my remote to see if it helped anything and I finally was able to see the AppleTv menu, but the images were blurry and with red pixels around them. This also blinked on and off the screen every few seconds.
    I turned it off, disconnected it and left it alone for 5 mins. Then I reconnected it and the issue is exactly the same.
    Any ideas?
    Thanks,
    Beca

    One of my original Apple Tvs suffered a similar fate - the menu graphics would freeze, not just movies - a restore back down to the very original software helped a little but that caused its own issues
    Definitely a Graphics issue with the unit itself, possibly related to heat build up. Cut my losses and bought a gen 2 model as a replacement.

  • CA with SAP FICO  and Japanese Language

    Hello Friends,
    I am Kapil studying  ( final group ) to become a Chartered Accountant.I want to do SAP FICO Module from SAP Certified Education Center in Delhi,India.I  have also done One Year Intensive Advanced Diploma in JAPANESE Language from Delhi University.I have also done JLPT Level 3.
    I have following queries :--
    1.Which one is the best SAP Education Center in Delhi both in terms of education and placement ?
    2.What are the job prospects after completing CA n SAP FICO  in Japan ?
    I will be thankful to you if you could provide me guidanc eon the above issues ..
    THANKS..
    Edited by: KAPIL KUMAR  singh on Apr 29, 2008 4:39 PM
    Edited by: KAPIL KUMAR  singh on Apr 29, 2008 4:39 PM

    Chartered Accountancy with SAP FI-CO itself is a lethal combination.  Looks like you love Japan or there is someone there whom you love.  There are quite some companies in Japan that have implemented SAP (you can get into support, upgrade, enhance kinda roles) and there are also new implementations in the pipeline.  As far as training goes, go to any SAP Education Partners (Siemens, etc.).  Give your full time to demos and practice sessions on SAP when in training - reading books only will not help.
    Good luck.

  • Localization: Best practice suggestions Apps with mixed UI and Content languages?

    I am trying to write a simple Universal app that can be easily localized to different UI languages. But the app also needs to display content that is determined by user settings. For example I would like the app UI to display in the users region (English,
    Russian, etc.) while at the same time having fields on the page whose strings are coming from other resources (Latin "la"? , Spanish, etc.).
    The samples are pretty good about how to setup resources with respect to the UI ( e.g. Strings/en-us/Resources.resw ) but not what to do if you want to also be able to draw strings from a different language. When the words in the content fields show in Latin
    I don't want the UI to also be in Latin.
    Suggestions on best way to do this?
    Thanks,
    -Tom19

    Hi Tom19,
    I did not receive the email notification on my mailbox for your reply, that's weird. Sorry for the late response.
    Basically we have the best practice documentation for you:
    Creating and retrieving resources in Windows Store apps also
    Quickstart: Using string resources, take a look at the documentations to see if these helps.
    --James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Combo Prompt Design (with Drop down and Multi-select prompts)

    Hi folks,
    I have the following prompt design requirement in OBIEE dashboard:
    PromptA: should be a drop-down prompt
    PromptB: should be a multi-select prompt
    PromptB should list the values contained in either of two dimensions (lets say: Product Names and Product Group Names ). Lets define Product Names to be the names of individual products, while the Product Group Names is the names of a predefined collection of certain products.
    The string values that should appear in the PromptA then are: Product Names and Product Group Names. Consequent to the selection made in PromptA, values from one of these two dimensions should be dynamically displayed in PromptB. That is, if Product Names is selected from PromptA, then all product names from the Product Names dimension should be listed in PromptB. And if Product Group Names is selected from PromptA, then all product group names from the Product Group Names dimension should be listed in PromptB.
    Can anyone tell me how do I relate the above two prompts and have my reports to work accordingly?
    regards,
    Mahendra
    Edited by: Mahendra Varman on Jan 7, 2009 12:11 PM
    Edited by: Mahendra Varman on Jan 7, 2009 12:21 PM

    Hi
    For this you have to do two dashboard prompt
    In promptA:
    select one dummy column,
    In control dropdown list select dropdown
    In show dropdown list select SQL Results
    In sql results write the following query
    Select case when 1=0 then tabelname.column else 'Tablename.ProductNames' end from subjectarea name
    Union all
    Select case when 1=0 then tablename.column else 'Tablename.ProductGroupName' end from subject are name
    In set variable ->set presentation variable called var1
    Saved it as PromptA
    In PromptB:
    Select one dummy column in that column forumla write @{var1}
    but problem with this approach it shows two Go buttons for two prompts to avoide this create custom Go button
    for creating custom Go button see this link
    http://obiee101.blogspot.com/2008/11/obiee-how-to-replace-multiple-go-button.html
    Try this its not work let me know
    i tried for another solution
    Regards
    Naresh

  • Has anyone used appletv with a scaler and/or a HD projector (1080p)

    any experiences?
    There are reports that apple tv can output 720p but also 1080i.
    Confirmations?
    thanks
    Loris

    I use an Anthem Statement D2 with a Gennum VXP video processor.
    The Apple TV native output resolution is 720P. It will also scale to 480P and 1080i internally.
    The output is much better if you leave it at 720P and let an outboard video processor do any additional conversions.
    Hi-def trailers downloaded at 720P/24 are excellent when the Apple TV outputs 720P and the Gennum converts to 1080i to a 55" Fujitsu plasma or to 1080P to a Sony VPL-VW100 projector with a 92" screen. Pretty much the same quality as regular hi-def TV.
    Photos are outstanding.
    Home videos from a Sony hi-def camcorder (1080i/30) also look fine, although iMovie outputs them at 960 x 540.
    Standard-def pictures are OK, but not great.
    I've really enjoyed it so far--looking forward to more 720P content...
    C.

  • How to combine update stmts with different filters and multi-columns?

    Hi,
    I found these following update stmts in one of our long running jobs. I'd like to see if it is possible to combine it in one update or merge stmt so I can reduce the scan time on the same table from 4 times to 1 time. But I'd need some expert suggestions for how to do that. Here are the stmts:
    UPDATE table1 c
    SET (polnum,polren,polseq,vehnum,
    compgrp,prodgrp,uwsys,comp,
    state,prod,rrdate,brand,
    agycode,AGYCLASS,valid)=(SELECT DISTINCT polnum,polren,polseq,vehnum,
    compgrp,prodgrp,uwsys,comp,
    state,prod,rrdate,brand,
    agycode,AGYCLASS,'A'
    FROM table2 v
    WHERE v.polnum=c.pol# AND
    v.polren=c.ren# AND
    v.polseq=c.seq# AND
    v.vehnum=c.veh#)
    WHERE c.polnum IS NULL;
    UPDATE table1 c
    SET (polnum,polren,polseq,vehnum,
    compgrp,prodgrp,uwsys,comp,
    state,prod,rrdate,brand,
    agycode,AGYCLASS,valid)=(SELECT DISTINCT polnum,polren,polseq,vehnum,
    compgrp,prodgrp,uwsys,comp,
    state,prod,rrdate,brand,
    agycode,AGYCLASS,'B'
    FROM table2 v
    WHERE v.polnum=c.pol# AND
    v.polren=c.ren# AND
    v.polseq=c.seq# AND
    v.mainveh='Y')
    WHERE c.polnum IS NULL;
    UPDATE table1 c
    SET (polnum,polren,polseq,vehnum,
    compgrp,prodgrp,uwsys,comp,
    state,prod,rrdate,brand,
    agycode,AGYCLASS,valid)=(SELECT DISTINCT polnum,polren,polseq,vehnum,
    compgrp,prodgrp,uwsys,comp,
    state,prod,rrdate,brand,
    agycode,AGYCLASS,'C'
    FROM table2 v
    WHERE v.polnum=c.pol# AND
    v.polren=c.ren# AND
    v.polseq=0 AND
    v.mainveh='Y')
    WHERE c.polnum IS NULL;
    UPDATE table1 c
    SET (polnum,polren,polseq,vehnum,
    compgrp,prodgrp,uwsys,comp,
    state,prod,rrdate,brand,
    agycode,AGYCLASS,valid)=(SELECT DISTINCT polnum,polren,polseq,vehnum,
    compgrp,prodgrp,uwsys,comp,
    state,prod,rrdate,brand,
    agycode,AGYCLASS,'D'
    FROM table2 v
    WHERE v.polnum=c.pol# AND
    v.polren=0 AND
    v.polseq=0 AND
    v.mainveh='Y')
    WHERE c.polnum IS NULL;
    Table1 has 800000 rows, Table2 has 200 million rows. In table1, about 12.5% rows has a null polnum, so 12.5% data will be updated.
    Thank you in advance with all your suggestions!

    the reason I never specified the joins is because I thought the joins were there to derive the Valid indicator, in which case they are not required if you are using the CASE statement. The join, "V.Polnum = C.Pol#" is still required as this is across all rows! If that is the case, then it can be simplified even more so;
    update   Table1 C
    set      (Polnum,Polren,Polseq,Vehnum,Compgrp,Prodgrp,Uwsys,Comp,State,Prod,Rrdate,Brand,Agycode,Agyclass,Valid) =
                ( select   distinct Polnum
                                   ,Polren
                                   ,Polseq
                                   ,Vehnum
                                   ,Compgrp
                                   ,Prodgrp
                                   ,Uwsys
                                   ,Comp
                                   ,State
                                   ,Prod
                                   ,Rrdate
                                   ,Brand
                                   ,Agycode
                                   ,Agyclass
                                   ,case
                                      when (Polren + Polseq=0) and (Mainveh='Y') then
                                            'D'
                                      when (Polren=0) and (Polseq>0) and (Mainveh='Y') then
                                            'C'
                                      when (Polren>0) and (Polseq>0) and (Mainveh='Y') then
                                            'B'
                                      when (Polren>0) and (Polseq>0) and (Mainveh!='Y') then
                                            'A'
                                    end as Valid
                 from      Table2 V
                 where     V.Polnum = C.Pol#
    where    C.Polnum is null;However if you are returning more rows than what you are expecting from the above update statement because the joins are being used to limit the data as well, then this might be more appropriate:
    update   Table1 C
    set      (Polnum,Polren,Polseq,Vehnum,Compgrp,Prodgrp,Uwsys,Comp,State,Prod,Rrdate,Brand,Agycode,Agyclass,Valid) =
             ( select v2.PolNum
                   ,v2.Polren
                   ,v2.Polseq
                   ,v2.Vehnum
                   ,v2.Compgrp
                   ,v2.Prodgrp
                   ,v2.Uwsys
                   ,v2.Comp
                   ,v2.State
                   ,v2.Prod
                   ,v2.Rrdate
                   ,v2.Brand
                   ,v2.Agycode
                   ,v2.Agyclass
                   ,case
                      when (v2.Polren + v2.Polseq=0) and (v2.Mainveh='Y') then
                            'D'
                      when (v2.Polren=0) and (v2.Polseq>0) and (v2.Mainveh='Y') then
                            'C'
                      when (v2.Polren>0) and (v2.Polseq>0) and (v2.Mainveh='Y') then
                            'B'
                      when (v2.Polren>0) and (v2.Polseq>0) and (v2.Mainveh!='Y') then
                            'A'
                    end as Valid_Flag
                ( select   distinct Polnum
                                   ,Polren
                                   ,Polseq
                                   ,Vehnum
                                   ,Compgrp
                                   ,Prodgrp
                                   ,Uwsys
                                   ,Comp
                                   ,State
                                   ,Prod
                                   ,Rrdate
                                   ,Brand
                                   ,Agycode
                                   ,Agyclass
                                   ,Mainveh
                 from      Table2 V
                 where     V.Polnum = C.Pol#
                 ) v2
             where (v2.Polren = C.Pol# or v2.Polren = 0)
             and   (v2.Polseq = C.Seq# or v2.Polseq = 0)
    where    C.Polnum is null;As before, both remain UNTESTED!

  • Query with F1 Help and the Language settings

    Hi Experts
    My F1 help shows in Czech language...but I need it to be in English.  I changed the language to English, however, the F1 Help still displays in Czech.
    Can you help please?
    Many thanks
    Caroline

    Dear Caroline,
    Please Follow this Steps
    Help>>Documentation>>Help Setting
    The Help Settings...
    Window will Open
    Languge>>
    English(United States)
    Check the Path C:\Program Files\SAP\SAP Business One\Help\EN
    and Open SBO_Help.chm File
    Thanks & Regards
    Nishikant S Virkhare

  • PS Newb needs help with image scaling and multi-sheet printout

    Hi, I'm trying to use PS CS3 to scale up an image I have so I can print it out to use as a map for a miniatures game.  I have no problem scaling the image to the appropriate size, but I can't figure out how to print out the image on multiple 8.5 x 11 sheets.  I had thought I'd seen an option for such a procedure previously, but maybe it was in another editing program.  If anyone has any ideas on how I might accomplish this I'd really appreciate hearing about them.  Thanks!

    Illustrator and InDesign do tiled printing as does CorelDraw. Photoshop as such does not, but some script for that may exist. In your case, the simplest solution would be to save the File as a PDF and have Acrobat generate a tiled print (Page Scaling setting in teh Acro print dialog). You just need to make sure your page properly fits multiple pages. Unliek AI and ID, Acro can only chop up stuff based on standard paper sizes...
    Mylenium

  • FB sdk 4.5 and multi-language support

    Hi All,
    I found this article
    http://devgirl.org/2011/03/15/flex-4-localization/#step4
    My app need to support couple languages. I am getting errors in FB 4.5 - SDK 4.5.1 using this configuration, does anyone know how works?
    Thanks in advance.

    Hi,
    I found this article:
    http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7f2d.html#WS2d b454920e96a9e51e63e3d11c0bf69084-7f34
    I follow adding new locales.
    Still have the error:
    unable to open 'C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\frameworks\locale\en_US,es_ES'
    I'm sure something simple is missing.
    Any ideas?
    It is a way to attach my test app zip file here?
    Thanks

Maybe you are looking for