AppleTV wont connect to my brand new macbook pro

i was at home a few days ago and my appletv worked awesome. now that im back at school i tried showing my friends how cool it was and for some reason it wouldnt work. i have done everything from turning my firewall off, resetting both devices, restoring my appletv, and going through both devices and making sure they both have home sharing on. they just arent seeming to find each other for some reason. pleeeeease help.

You won't lose anything with a reset. it is similar to rebooting your computer and is covered in the basics section of the manual.
You need to transfer your purchases ( apps included ) from the iphone to the computer - as they will be erased when you sync anyway.
Without syncing: File>Transfer Purchases

Similar Messages

I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?

I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?

Hello HanaAmer1,
We've an article which provides troubleshooting steps that can help get AirPlay workign correctly.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen

I have a brand new MacBook Pro . I am trying to connect to the private wifi at my house but I need the IP address of my laptop . Everywhere I go on the laptop, the IP address is blank . How do I find the IP address if laptop is not connected to the wifi

I have a brand new MacBook Pro and I'm trying to connect to the private wifi at my house however, I need the IP address. Everywhere I go to find it, the adress is blank. What do I do ?

Your Mac won't have an IP address, at least not a valid IP, until you actually connect it to your home LAN. Not sure why you think you need the IP, you don't.
To connect to your home WiFi you need to know the SSID name, IE the name of your home WiFi, and the password for it. Once you have those two things click the little antenna looking icon on the right side of the menu bar and select your home WiFi name and click connect. A dialog box will pop up asking for the password, type in the password and click OK/Connect/Whatever.

Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

Fixing this is a two step process:
1) System preferences > WiFi/Airport ...
... check [√] Ask to join new networks
"Known networks will be joined automatically.
If no known networks are available, you will
be asked before joining a new network."
2) Remove unwanted networks from the list of "known" networks under
System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton

Brand new macbook pro 15" when connected to external LCD display in high resolution ,flickers often

Hi,
I have brand new macbook pro 15" with retina display.
I have connected external LCD display (Samsung B2230) using Apple VGA adaptor & thunderbolt port. But LCD display flickers quite oftenly. I read community blogs where many macbook pro users like me are facing similiar issue.
There is no problem with LCD display as it works fine with Lenova laptops.
Can anybody please provide me the solution to this problem.?
Regards,
Sam

Hello there, Sam.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server.

I'm being shown an error pop-up message periodically saying "There was a problem connecting to the server. URLs with the type 'file:' are not supported." I have a brand new MacBook Pro, and at no time am I actually having trouble connecting to the server, but this message continues to pop-up several times a day at random intervals. Is there something I'm doing wrong? Or is my computer just having a glitch? Other than that, and a mildly sticking caps lock button, it's working perfectly.
Thank you!

Alright it didn't solve it. Any other suggestions?
I haven't suggested a solution yet. I want to know whether you still get the messages while Time Machine is disabled. Do you? If so, try any or all of the solutions proposed in this thread:
There was a Problem connecting to the...: Apple Support Communities

Why wont my brand new macbook pro boot to an external disk?

why wont my brand new macbook pro boot to an external disk? I have the 10.7.4 on both. The MBP came with it so I installed it onto the hard drive i have been using the same way with an older macbook pro but the new MBP does not see the startup disk. So i installed the same version of the os onto the MBP by hooking it up to my imac as a target disk because it would not recognize the install usb stick. Now the brand new MBP doesnt start up

I had the same issue. The 2012 macbook pro has a different 10.7.4 build that is not yet available for public release. It won't boot no matter how much you try. You need to wait for Mountain Lion and create a start up disk from ML. Apple most likely will release a 10.7.4 update for the 2012 models, but they are focused on ML now.

My brand new Macbook PRO i5 can't connect to internet after sleep? It works fine after reboot.

I have a brand new Macbook PRO with the latest OS and the latest EFI. I haven't installed any 3'rd party products except Moneywell for my private finances. After a couple of days it couldn't connect to internet after sleep. I run the network diag and it says the connection is OK. Log out/in doesn't help. I have to reboot everytime it wakes up after sleep. Any clue?
br,
DAVID

I am having the exact same problem. It started with 10.7, was fixed with 10.7.1, then came back again with 10.7.2.

Brand new Macbook pro 15inch (not Retina) wont boot my MBP 13 inch (2011) HD

Just bought a brand new macbook pro 15 inch, replaced the hdd with my 13 inch hdd and it wont boot. i got a Error msg. (Lion)
- I put the new hdd in the old MBP(13 inch) and it boots fine.
- I put back the old hdd in the MBP(13 inch) and it boots fine.
I figured the hdd wasnt compatable with the 15inch so then i cloned the 13inch hdd onto the 15inch hoping it would work. i still got the error msg.
so now im stuck because the 15inch wont boot from the stock hdd because it has the data from the 13inch. Very frustrating, what could be the logical reason to why it wont boot?

That's correct. The version of Lion you have on your old disk will not boot on the new machine.
What you should have done is make a Time Machine backup of your old drive. You still may be able to buy an enclosure for it and see if you can use Migration Assistant to migrate your apps and data, but I'm not sure that will work (works when an old drive is in another Mac and you transfer via, for instance, Firewire).
So you'll just have to resinatll the correct version of Mountain Lion and then you can TRY to use Migration Asistant to get your data/apps from your old hard drive once it's in an enclosure (again, I'm not sure that it will actually WORK, I've never tried it).
Clinton

Brand new MacBook Pro OS X Lion turns off when iPad connected

I have a brand new MacBook Pro and I connected mt iPad to it tonight. I have connected it once before sync it when I got the MacBook. Tonight every time I tried to connect it the MacBook would turn off (poof!) When it turned on, It came up with a USB disabled as something draining too much power message. The laptop is plugged into the mains directly at the wall socket.
I tried a different cable and it causes the message or shuts off the laptop. I used the same cable in my husband's iPhone and it is working.
Is it the MacBook or the iPad? It is a 1st gen still under warranty. What should I do?
All help will be appreciated. I reset the PRAM already.
Thanks

Can you run an Internet Speed Test? Reboot first and don't open any programs but Safari to perform this.
You can use any website, here's one listed below:
speakeasy.net/speedtest

Brand New Macbook Pro one of the USB wont recognize device

Hi, I recently acquired a brand new macbook pro i5 core model for school. It was running perfect and I was so happy with my machine the last few days then suddenly last night my mouse didnt work no more. I thought it was strange so I tried the port that was closer to the power adapter and it worked in that slot. I tried plugging it into it several times again and no luck. I tried restarting my computer, no luck. I tried plugging in my Ipod nano, no luck but works in the other one. I went on here and looked for options. So then I tried resetting the Pram, and the smc, several several times, to no avail. I then even got this thing call usb prober and that didnt make it recognize it either. I am at a lost of what to do. The strange thing is though it WILL run my laptop cooler, it just will not recognize any devices?? Any help without having to go to a Genius would be great, thanks

Welcome to Apple Discussions!
Your USB port may not be delivering the power it should. The best thing to do would make an appointment at the genius bar and have it evaluated. You are under warranty, and this sounds like it may be a hardware problem that Apple needs to fix for you.
Good luck!

Brand new MacBook Pro Retina display wont come up at all.

I got a brand new MacBook Pro retina display a week ago. Since yesterday, it won't come up at all. Screen stays blank, no HD sound, nothing. Does anyone else have same issue which they resolved already?

I did call them and it seems there is no solution except sending it back to them and getting a new one.
This is by far the most strange issue I have seen. Seems more like a hardware issue than software.
Thanks for you suggestion though. I will post an update ones this case gets resolved.

Strange wifi problem on a brand-new MacBook Pro

Hey there, I'm new here. Desperation has got the better of me, and I hope I can get some advice.
So, last sunday I bought a brand new 13" MacBookPro with 2.8g i7 processor and 10.7.2 OS (I can't update to 10.7.4 because System Update tells me the download has been tampered with or corrupted after I waited 2 hours for it to finish, but I'm trying a direct download from the website). Here's the exact product: http://www.amazon.com/Apple-MacBook-MD314LL-13-3-Inch-VERSION/dp/B005CWIZ4O/ref= sr_1_5?ie=UTF8&qid=1340301247&sr=8-5&keywords=macbook+pro+13
Everything is all perfect except for a strange wifi problem. Note that the wifi does not turn-on or off, it doesn't disconnect after 'sleep', it doesn't get less speed, it doesn't constantly leave a preferred connection (once I chose my home wifi it always connects to it no problem). The wifi bar is always full. What is wrong is that the internet is kinda 'glitchy'. The best metaphor I can think of is that it's like a car that has to be pushed down the road before the engine can start. Please, bear with me because this is kinda hard to explain and I'm not good at tech lingos.
One of the symptoms is browsing can get really slow and inconsistent, almost as if the wifi gets turned off in the middle of browsing. For example: if I look something up on Google and then open 5 new tabs, probably only 2 or 3 of those tabs will eventually load while the other two will not get past the long 'http:.......google.....etc etc' address and will eventually show one of those 'error loading page because there's no Internet connection' notice. This happens a lot. Sometimes I have to refresh/retry loading a page a couple of times before it finally loads, then usually everything will get back to normal and I will be able to open multiple tabs with no problem, but in a couple of minutes I would try to open another site and the problem will start again.
So I tried to see how it does with downloading using iGetter. Fortunately I also have a Macbook (white-plastic casing one) and my brother has an old 2006 MacbookPro so I can compare. With those two older Apples iGetter starts receiving data in less than 8 seconds after I click Start, while my brand-new Macbook Pro can take up to 15-20 seconds, sometimes it doesn't even start at all and I have to re-click the start button. But once the download actually starts (on my new MacBook Pro), it downloads like normal, it doesn't stop and the speed is also as good as I can get. Strange huh? Hence, like a car that has to be pushed before the engine starts.
I also tried 'speed testing' from a website with all 3 laptops. On my old MacBook and my brother's MacBook pro, once I click 'begin test' it takes only a couple of seconds of 'ping' before the download/upload speed measurements start, but with my new MacBook Pro (just like with iGetter) it takes up to almost a minute before the measurements start, sometimes it won't start at all and I have to re-start the test.
Well, thanks for reading. And hope you can help me shed some light into this. Because it is really preventing me from really enjoying my new MacBook Pro. And if this is most likely a hardware problem, I'd better get back to the store and try to get it replace or something while it's only been 5 days. *cheers*

Hey guys.. Thanks for the replies. Unfortunately, I bought the MacBook in Indonesia where there are no such thing as an AppleCare. The only option is to leave the Apple product to one of the 'Authorized Apple care centre' and have whoever do whatever to it without guarantee of success. As for returning it and getting a brand new one, I also don't know if there is such a deal here, but that's actually a good idea, will try to go to the store tomorrow. Although, I'm worried that the problem might be with OSX Lion or something and getting a new one won't help.
mark75090, I've tried resetting the router when I first noticed te problem, didn't work though. I've checked my new MacBook's wi-fi (option+click wifi bar) and it says 'PHY Mode: 802.11g', so does my MacBook and the old MacBook Pro. I don't know what those mean though, and I don't know whether or not my router is an N., can you tell me more please.. I have tried with the other two turned off, and only the new MacBook using the wi-fi but the problem persists. I have also tried connecting directly to the router, but as I described, the problem is too subtle for me to notice the difference.
Also, if I create a brand new Wi-Fi connection in network preferences and connect to my router through the new Wi-Fi profile, the problem seems to be gone for an hour or so, then it always comes back though. I have also just finally installed 10.7.4, but it doesn't help either.

AppleTV wont connect to my brand new macbook pro

Similar Messages

Maybe you are looking for