Appleworks 5 files won't work with Pages, appearing as UNIX files

I realize Pages will not open Appleworks 5 files. However, for some reason, when I copied my Appleworks 5 files onto a hard drive and put them on my PPC G4 iBook running OS 10.4, the icons for the files are appearing as unix executable files. I had no problem opening 5 files with 6 and did so every time I opened one. I would save them as version 6 (to upgrade the file) as suggested. But, the files that were copied from my old G3 to the G4 using the hard drive to move them, are now unable to open on the G4 using even Appleworks 6.
I had planned to open them in 6, convert them to 6, then open them in Pages.
This is why people hate Microsoft and Apple is doing the same nonsense. It's bad enough to buy a brand new imac that doesn't have a Superdrive. Why put an SD card reader on the ports while leaving off useful things like the drive, or minimally a Firewire 400 or 800 port. That aside, I had no idea their own proprietary software (Pages) would be designed to not work with Appleworks 5. This is why someone can get away with refusing to use Microsoft Office, or should be the reason.
Why are these files showing up as Unix files and cannot be opened even with Appleworks 6???
Any advice?

Unix assumes any file without an extension is an executable file. the Classic (pre OS X) Mac OS did not use extensions/suffixes, but depended on internal Creator and Type codes to identify the application associated with a particular file. Unix (including OS X) does not recognize these codes, and requires an extension.
For AppleWorks, the extension is .cwk.
Add that extension to your AW5 filenames and they should open in AW6.
As for the dropping of the Superdrive, this seems to be just the most recent step in pushing the Mac into the present. The first second was dropping the 3 1/2" floppy drive from the original iMac. Prior to that, the first Mac had a 3 1/2 inch floppy, but not the 5 1/4 inch version used earlier on the Apple ][ series. Have you had need to use a floppy recently?
Regards,
Barry

Similar Messages

  • I have a Canon D60 camera, my raw files won't work with the raw converter in my Photoshop CS5. Do I need CS6?

    Photoshop CS5 won't work with the raw files from my new Canon D60 camera. Do I need CS6?

    A Canon EOS D60? It had support since Camera Raw version 1.0.

  • Won't Work with .pages file

    Hi,
    I'm going to acrobat.com to try to convert my .pages file into a pdf but it says that it's not supported.  What should I do?

    Hello,
    I'm sorry for the delay in responding to your inquiry.
    It is correct that we don't yet support .pages files for PDF conversion. It is our long term goal to support as many file types as possible. For now, you could try converting your file to a supported file type and then converting to PDF using Acrobat.com.
    Kind Regards,
    Michelle

  • MKV file won't work with VLC

    Hi, I am trying to play this MKV file. Every MKV file I have ever thrown at VLC has worked so far, but only this one won't. The file does work in Xine and Mplayer, etc. just fine. Here's the output:
    Code: Select all
        /media/seagate/dvd # vlc refined-avp2.mkv
        VLC media player 0.8.6f Janus
        [00000329] dts decoder: DTS channels:6 samplerate:48000 bitrate:1536000
        [00000333] main audio output error: couldn't find a filter for the first part of the conversion
        [00000333] main audio output error: couldn't set an input pipeline
        [00000280] main playlist: stopping playback
        /media/seagate/dvd #
    And it plays video a-ok as normal, but absolutely no sound with any output
    What can I do? If I should compile VLC what edits should I do, etc? Thx in advance

    Hello,
    I'm sorry for the delay in responding to your inquiry.
    It is correct that we don't yet support .pages files for PDF conversion. It is our long term goal to support as many file types as possible. For now, you could try converting your file to a supported file type and then converting to PDF using Acrobat.com.
    Kind Regards,
    Michelle

  • Importing cr2 raw files won't work on ios 6 when it worked fine on ios5. Anyone have a solution?

    I have  been importing cr2 raw files to my iPad using ios 5 but importing cr2 raw files won't work on ios 6. Sees files in camera but when import stops it fails with an exclamation mark in red circle. Anyone have a solution?

    Don't know if you care anymore or it applies, but I was able to get things working but it took drastic measures.
    I had to do a full system reset and update by doing the following:
    - Make note of all your settings in your system and apps especially accounts and forget about in app data that's only on your iPad and not in a cloud service because it will be gone after this
    - Connect iPad to Mac and startup iTunes
    - Hold down Home and Power buttons simultaneously for about 8 sec until the screen turns black
    - Release the Power button but continue holding the Home button until there's a popup on your screen which indicates it's in recovery mode
    - Follow the instructions to recover your iPad but recover it to factory state, not recover from a backup
    - Reinstall all your apps and content
    - Reconnect to all your services on your system and apps
    I could not restore from a backup since it brought back my bad data too.  It also didn't restore my music and no matter what I tried it wouldn't put my music onto my iPad.  Had to start clean.
    It appears over time that the system gets dirty and there's lots of bad data that can't get resolved.  This is especially true if some of your apps have crashed a bunch.

  • My airplay mirroring won't work with my macbook air, eventhoug my internet connection is very fast. The image will appear after 5 seconds.

    My airplay mirroring won't work with my macbook air, eventhoug my internet connection is very fast. The image will appear after 5 seconds.

    Mirroring is done over the local network so internet speed isn't relevant.
    I would check istumbler.net to see if there is any interference

  • Can't read or write some files, internet is failing, youtube won't load, software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar, etc. Malware?

    Specs:
    iMac 10.8.5
    3,4 GHz Intel Core i7
    32 GB 1600 MHz DDR3
    Can't read or write some files, internet is failing, youtube won't load, security software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar and are randomly corrupted, when I entered something in the Youtube searchbar (when it was still working) it send me to a site with sexadds.
    I tried restart my iMac and when I was logged back in, my dock preferences were reset.
    Also tried to download some security software to check my Mac for malware, but when I did, I tried several, I got a notification that said something like 'dumpfiles (don't know if this is the right translation...) damaged'.
    I'm taking screenshots from all the weird notifications I get and even three quarters off the screenshots I took in the last three hours are already unreadable.
    It started this morning when I tried opening a Premiere Pro file on which I worked the night before.
    When I tried opening it, it said the file was damaged and could not be openend.
    I tried opening it with AE or importing the file in a new project but nothing helped.
    When I tried looking for autosaves, this is the really weird part, there were none.
    Even though there are autosaves from my other projects, this one was completely gone.
    It looked like the day before never happened on my computer.
    Also when I openend Premiere all the recent projects had been wiped.
    So at first I thought it was a Premiere Pro failure.
    But than, later on the day, I tried loading some RAW files from my compact flash card.
    This is where I would get an error (error -36) which said some data cannot be read or written.
    I tried importing the files with a view different technics, from dragging to importing via Lightroom and I succeeded with Image Browser.
    But when I tried moving the files to an other folder the same error occurred.
    While dealing with this issue I wanted to put on some soothing music on youtube.
    This is when the next weird thing occurred: youtube wasn't completely loading in Chrome. I refreshed a view times, checked the internet connection and still no difference.
    When I tried in Safari it did work but when I clicked enter on the searchbar in Youtube, a page with sexadds appeared (I didn't install AdBlock in Safari...).
    I read about this 'phishing' where you are redirected to a site were a possible malware installment can take place...
    I don't know if it's connected to any of the problems I've been having but I just never experienced this on a mac, I have been a Mac user for 10 years now.
    On top of it all, internet started working worse and worse and now it's not even working at all. I had to fill in the password over and over, normally it remembers.
    Just like my system preferences, all the preferences I had with Chrome where also reset.
    Also somewhere in between I got this notification: Mac OS X must restore library to run programs. Type your password to allow.
    To me this is all very weird and suspicious. I have clearly no idea what's going on. Could this be another sort of trojan horse or malware?
    Some background info which could be helpful for solving this mystery:
    two months ago the one year old Fusion Drive in my iMac just broke out of nowhere.
    I got it replaced by a qualified apple repair store.
    When I got my computer back, all the files where gone.
    I got on the internet without AdBlock installed yet.
    A game or whatever it was, can't clearly remember, got installed by accident.
    I deleted it immediately.
    Only two weeks later, I couldn't log in to my account. It didn't recognize my password and username. 
    So I brought my mac back to the store.
    Here the repair guy said it was a minor thing and he just needed to reconnect my account. He also mentioned he found a downloaded game name Sparta and it probably had something to do with the error.
    I asked him; could it be a virus? He replied no way.
    I don't know why I couldn't be a virus, just because it's a mac doesn't mean it cannot be done.
    So today I tried installing anti virus software (such as avast- was in a weird language looked like slovenian, clamxav - was in slovenian) but I couldn't install them.
    PLEASE help me! I don't know what to do anymore, I work fulltime and I need my computer, I have no time to bring it in for repair, are there other perhaps easier ways?
    Could this be the work of a virus or a malware? Or is it a disk permissions issue?

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Safari won't work with CNN Pipeline and other sites all of a sudden?

    Safari won't work with CNN Pipeline and other sites all of a sudden? A few weeks ago Safari was working OK but now I often have to use Firefox to visit certain webpages.
    Anyone else having this same problem?
    Is there a quick fix?
    I'm using Safari 2.0.4
    Thanks.

    Hi QuickTimeKirk,
    I have WMP version 9, as well. I do not use F4M, for many users f4mac is what helps.
    I find some items work while others do not. I always get an alert about the wmp , which version it is, takes very long to load, I find it is not consistant with Safari, as seems the poster of this topic has found.
    Quoted from ms Mactopia site:
    http://www.microsoft.com/windows/windowsmedia/player/mac/
    Download and find information about Windows Media Player for Mac and playing Windows Media files in your QuickTime Player. Which download is right for you?
    Windows Media Components for QuickTime
    Windows Media Player 9 for Mac OS X
    Windows Media Player 7.1 for Mac
    Important Information
    Microsoft will continue to offer Windows Media Player for Mac as a download free of charge, but has no plans to provide future updates or product support.
    We are pleased to offer Windows Media® Components for Quicktime, by Flip4Mac™, as an alternative for Mac OS X users wanting to play Windows Media Audio and Windows Media Video.
    ~•~
    Validation of the cnn home page using the W3C Validatior, http://validator.w3.org/
    http://validator.w3.org/check?uri=http%3A%2F%2Fwww.cnn.com%2F
    though 41 errors is not as poor as some, Firefox handles the site better than Safari, imo.
    Some sites just work better with Firefox or an other browser.
    Cheers,
    Eme '~[ )

  • Working with Pages and Word-questions!

    NOTE: Sorry for the similarity of this to my post a few minutes ago titled "Which do I use, Pages or Word)? I learned some things through experimentation and have created subtler and more challenging questions for you.
    Help me out here (please). I am now working with Pages, sharing documents with dozens of behind the times colleagues who are using some old program called "Word." It's my job to work with these people and I'm trying to make it as easy for everyone as possible.
    Do I have this right? When I create a document (or open an old Word document into pages), in order to be able to share it with people, I save it, and check the box to save a copy in Word format. Then when I send my documents, it works like a charm. Yes?
    If I start by opening a Word document, and every time I save I check "save copy to Word," I end up with only one document, no version in Pages. If I start with a Pages document, or save without checking the box, I end up with two separate versions of the document (like when I create a pdf)? It appears that if I I want to keep working in the Word format, every time I save it will give me a dialog box and make me check the box (and possibly select my location). This is cumbersome since I am now in the habit of saving often (you learn that when you work with Word for the Mac for any period of time--bomb, bomb, bomb). So, an I correct in assuming that if I want to save regularly, I really have to work in Pages, and then be scrupulous about saving into Word when I'm done for the day, or just before I send? It's sort of a pain in the butt, although I can learn to do it--I just want to make sure I'm not missing something here. Also, is there an autosave function so I don't have to rely on my discipline? Or does it never ever bomb?
    What happens if I open the Word version and make changes to it? Do I have to do something differently to make sure I have both versions identical? Am I better off always to open the Pages document to work on, then save and send?
    Do I always then have two versions of the same document (like I would if I did this same thing with pdf)?
    How do I make sure that the Word version is always up to date since that is the one I am sending to colleagues? Do I always have to save and check the box, and then select the correct document to send?
    I do see that when sending a single document I can easily send it while I am in the document itself. When I do this, selecting to send it as a Word document (or a pdf for that matter), will it send the version I most recently saved, or the version that is on my screen (if I forgot to save changes)?
    FInally, I'd be open to any tips from people working regularly with others who must use Word. I want it to work as simply as possible, but want to set up some good habits from the beginning.
    Finally, finally, have you had problems with compatibility. I have to say that there have been very few Word document yet that I've opened that I haven't gotten a message that says that Pages doesn't support some aspect of the document and formatting is removed, or spacing is different, etc. The most common is that "paragraph borders operate differently so all borders except outside borders have been removed." I'm a bit nervous about this--will I be getting documents from others that I can't trust? Will I have to ask them to send a pdf as well so I can confirm that I got it right? Can anyone ease my mind? Or am I living in reality?
    Thanks a million!
    EagerLearner
    Message was edited by: eagerlearner

    Well yes they are not the same program so there will be differences.
    For example Pages only allows a border all the way around a paragraph with few options on the style of line, which is why you got the warning.
    A workflow would consist of you doing your work in Pages however you like it and when you have finished and saved, making a Word copy which you despatch to your colleagues and then throw away.
    Of course this is more cumbersome than sticking with MsWord which is another option. You choose. It comes down to whether or not you have to tightly conform and interact with Word users. Maybe Pages is not for you, or even NeoOfffice which is a clone of MsOffice.
    Test it. If it works and you like it stick with whatever solution works for you.

  • Recently upgraded to Mavericks... was working with Pages documents from previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents.

    Recently upgraded to Mavericks... was working with Pages documents created with previous OS ... Pages is now frozen and I don't dare force quit and loose my old documents.  How can I "thaw".... unfreeze Pages?  Have several pages windows open that I was working on. 

    I also had this problem after I installed Mavericks: Pages files freezing at close, need to force quit.
    Workaround: when saving any document created with an earlier version of Pages, be sure to untick the "include preview in document".
    For some reason, this resolves the problem.
    BTW "loose" is not a verb. You probably mean "lose".

  • I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

    I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

    HI Dave,
    I'm surprised you get no message when you attempt opening the Excel document in Numbers.
    I'm assuming Numbers 3.1, since you are running Mavericks.
    Does the Numbers file that opens show any content?
    Does it contain a table?
    How large?
    Does it contain more than one tab (indicating more than one sheet)?
    Do those other tabs contain a table?
    Have you checked those tables for data content?
    There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
    I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
    Regards,
    Barry

  • 3rd party USB mouse won't work with G4 iBook 10.3.9

    3rd party USB mouse (see specs below)won't work with G4 iBook 10.3.9.
    http://www.inland-products.com/singleproduct.asp?search=usb&partnum=07340-SpecR
    I notice the specs say this mouse works with windows(no mention of Mac) yet the guy where I bought it assured me it would work fine with a Mac. The keyboard/mouse preferences shows a muouse but there is no movement or response from mouse. I would assume it was not reading it if not from appearance of "mouse" preference. I also have intalled UBBoverdrive in hopes that that might help but device/mouse menue does not appear to support mouse.
    Is there a way to get this to work or should I just return it to the vendor?
    Can anyone suggest a good CHEAP 3n button mouse for Mac?

    The name of that mouse is deceiving. It is not a USB mouse it is a wireless mouse. Unfortunately without the proper OS X drivers for the USB/wireless adapter you won't be able to get that thing to work.
    If you are looking for an inexpensive USB mouse, checkout the Kensington Mouse in a Box Optical.
    Does your iBook have Bluetooth? If so take a look at the Kensington PilotMouse Mini Bluetooth Mouse. I have one of these and it works great.

  • PDF file won't open with double click

    Mac OSX 10.6.8/Acrobat 10.1.3.
    Suddenly pdf files won't open with a double click, I now have to open Acrobat and file>open.
    Also, once they're open, they won't close by clicking the red close dot, I now have to go to file>close.
    Very frustrating!

    Even reinstalling doesn't work with the standard Creative Suite installer. Except for the double-click bug, Acrobat doens't respond to dock-tasks either, like <right-mouse-click> on dock icon and select <quit>.
    In this version of Acrobat, the repair function doen't seem to exist anymore. Sadly....
    So the problem keeps existing, even with the laterst 10.1.4 version.
    ==========================
    OSX 10.8 - Acrobat Pro X 10.1.4

  • InDesign files won't open with double click

    InDesign files won't open with double click on my MacPro with Snow Leopard although they do open from external hard drives when I double click.

    Thank you very much,you were correct, it appears the mouse clicks were set too fast. Thank you very much indeed for taking the time to answer my question.
    Regards,
    Mag1975

  • Received warning re. McAfee ScriptScan 14.4.1 extension won't work with FF 10.0.2 update, and will be disabled. How should I proceed?

    MY system is Windows XP, SP3, laptop, running FF 9.0.1. When trying to update to FF 10.0.2 I got a msg that the McAfee ScriptScan 14.4.1 addon won't work with FF 10.0.2 and will be disabled. Shall I go ahead and install the FF update? Would it be a security risk either way? Which one is worse?

    I don't know what ScriptScanner does, but I think it's always a good idea to update Firefox to eliminate known vulnerabilities, particularly if it's your main browser. You can see what security problem were fixed in Firefox 10.0.2 (and earlier versions) on this page: https://www.mozilla.org/security/known-vulnerabilities/firefox.html
    According to the end of this long forum thread, there's a good chance it will still work (based on experience with the previous release): [https://community.mcafee.com/message/226187 McAfee Communities: McAfee ScriptScan for Firefox 14.4.0].
    However, it has been reported that the McAfee add-ons can cause Firefox to use much more memory. If you notice a performance slow-down, consider disabling them. More info: [http://blog.mozilla.com/nnethercote/2012/02/17/the-mcafee-site-advisor-add-on-has-an-appalling-memory-leak/ The McAfee Site Advisor add-on has an appalling memory leak | Nicholas Nethercote].
    Hope this helps.

Maybe you are looking for