AppleWorks color menu not available

I've tried to find the color menu and was told to trash preferences and restart but prefs is not available either. Please let me know what I can do to get my color back and also what could have happened to the
file preferences. Thanks.

Hello
The "Text Color" menu, at least when we are working in a text document is available at the very bottom of the menu "Text".
I never saw a corrupted preference file removing this menu item.
If you are missing the Text color BUTTON, it is an other story.
You may have a corrupted "AppleWorks 6 Button Bars" preference file.
Or you may have removed the button from the button bar.
If you did that, look at the help for the chapter beginning with:
Adding or removing Button Bar buttons
AppleWorks comes with many preconfigured buttons for common tasks. You can add these controls to the Button Bar.
To add a preconfigured button to the Button Bar:
1 Choose Preferences from the AppleWorks menu, then choose Button Bar from the submenu.
2 Drag the preconfigured button from the Available Buttons list to the Button Bar.
Tip: You can also double-click the button in the list to add it to the Button Bar.
Yvan KOENIG (from FRANCE vendredi 23 décembre 2005 19:15:57)

Similar Messages

Send to Color is not available in FCP

Hi,
Last year I installed final cut studio 2, and have FCP 6.0 and Color 1.0 installed on the same computer. When I go to the Send command on FCP, the option to send to Color is not available.
I'd like to mess around with Color, but can't get any clips on it..
Anyone had this problem or knows how to fix it ?
Thanks !

Do you mean...
COLOR is not there at all in the "Send To.." pulldown tab... or
it is greyed out?
Can't help much in the first instance because its not in my experience base... might be a prefs or install issue. If its not offered, but is named, then its a case of selecting the open sequence.
It is also possible to open COLOR separately, name a project, SAVE it, and have it become active. You should be able to navigate to a media directory in the SETUP/Shots dialogue, and import clips from there. Be sure to set the project fps rate before importing any media... that is a project deal breaker from the getgo. There are very few after-the-fact "sequence setting" options. After adding media, it is not possible to change the frame rate of the timeline. It was the first thing to check off in Final Touch before proceeding with anything else.
Kind of like setting frame dominance and interlace in SHAKE. Immediately.
jPo
Message was edited by: JP Owens

Favorites menu not available in firebox

''locking as a duplicate of this - https://support.mozilla.com/en-US/questions/872499''
favorites menu not available in firebox

Firefox use the term Bookmarks, instead of favourites/favorites.
Firefox also has several advanced features see also
* [[how do i use bookmarks?]]
* [[what are tab groups?]]
The blue text above are clickable links, the articles themselves also have other links within them.

Color Yellow not Available

Suddenly the color yellow is unavailable on OS 5.7 and FCE 4.01, using Power MAC G5. Recently uploaded suggested updates, iTunes, Security, etc. Color yellow no longer appears. I changed monitors and it is still not available. I tried to update colors on displays under system preferences. It did not work. What did I miss?

How do you mean the color is not available? Is your entire display tinted blue or turquoise, or are all other colors correct, except yellow hues? If so, how close do you get - what about orange? Is it only one specific yellow that is gone, or all yellows? What about BEFORE the system even starts, if you hold down ALT as the system boots up, or if you start from the Install DVDs?
If the entire display is tinted, I would say your display adapter is pooched, if you have one. If you don't use an adapter, the video card.
You could try creating a new user and see if that user has the same problem. If it does not, the problem is specific to your user, and is probably a setting or a strange program you installed for yourself. Removing that should resolve the issue.
If the display looks good from the install DVD, you have an OS X issue, or settings issue. Archive-and-install should resolve that.

Third generation ipod shows incorrect language and settings menu not avail.

My thirty gig., third generation, Ipod shows the German language and the "settings" menu is not available to change the language back to English.Any help you can provide will be greatly appreciated. Thanks.

I finally found that "settings" menu by trial and error and I was able to change the language back to english. It was a royal pita lol.

"New root object" menu not available

I'm using SJS Directory Server 5.2patch3 on Solaris 9, installed silently through state file and all seems to work fine (even if I don't understand why I have to repeat the installation more than one time since the first one doesn't create the proper directory structure inside the installation directory).
Through the Server Console, I created then a new subfix (o=people,dc=my) with its individual database under the userRoot (dc=my) and now I'm trying to create a new root object under the configuration panel (o=people which would reference to the dedicated database created in the previous step). That menu option is not available, which appears a bit strange since I'm logged in as cn=Directory Manager, which should have the proper rights to complete this operation.
The only solution would be to initialize the database through an LDIF file but I don't have a clue about all the attributes I should assign to that organization, acis ecc. It would be simpler to use the console; at least, I'm curious WHY the console doesn't allow to accomplish that step.
Any help greatly appreciated.
Many thanks,
Fabio

The "New Root Object" task only appears if you created a new suffix.
Have you done a right-click on the server or on the "dc=my" entry?
Tested this for you some minutes ago with DS5.2Patch3 on Solaris9/SPARC and it worked out fine.

Mozilla edit menu not available. Customize does not provide way to turn on menu bars, still don't have view or edit

My edit toolbar is not available. None of Google help's suggestions work. Customize does NOT have a tab to turn on menu bars - I have reset Mozilla and I am not on full screen. Thanks for any help

The classic Menu Bar is not displayed by default, so after Reset, it will not appear immediately. To turn on the Menu Bar, try one of these:
* right-click a blank area of the tab bar
* right-click the "+" button on the tab bar
* tap the Alt key to display the classic Menu Bar temporarily, then View > Toolbars
* in Customize, try the Show/Hide Toolbars button
Any luck?

Updating podcasts: Full menu not available

I cannot force my podcasts to update by choosing the menu on the podcast when there is no specific podcast available on my iTunes. The full menu is available when the Podcast gropu has at least one specific podcast in it.

I had the same problem. I don't know if Apple screwed this up and its a bug or something but how I fixed it is instead of using the list view you have to view the podcasts in the "cover" view {the middle button in the view options} and then you can click on each podcasts and the full menu is there for each one.

AdobeRGB Color Space Not Available

Using a Windows 7 operating sytem with PSE 10 and an Epson Artisan 1430.
Everything listed above is currently updated.
In PSE Color settings Always Optimize for Printing is selected.
When preparing to print AdobeRGB is indicated in the PSE printer driver in the Color Management window.
When I click Advanced and go to the Epson printer I choose ICM. In the Imput Profiles window the only color space available is sRGB. No AdobeRGB.
Searched for it through a combination of other settings, but no AdobeRGB. I have updated the printer driver and rebooted the computer, but still no luck.
Is this an issue with Epson or PSE?
Thank you for your time.
Copper

I looked at your attachment and get the same options. My question is
regarding the selections once I go to the Epson Printer Driver. There is
an advanced button in there where you select ICM and the colour space.
Initially I was thinking it was an Epson issue since it's in their printer
driver, but when I connect the printer to two separate computers both using
PSE 10, one gives me the option to choose sRGB or Adobe RGB and the other
computer only gives me sRGB.
The option to choose Adobe RGB exists in PSE's Colour Management area, but
it does not exist once I go into Epson's Printer driver where I would
choose other options such as Borderless / Gloss / High Speed etc.
Is there any reason you can think of why the Adobe RGB option would exist
in one computer, but not the other when I'm using the same version of PSE
in both, the same printer on both and all drivers - printer - graphics card
and PSE have been updated.
Thank you
DW

Image Resize Menu not available

According to Mail Help, when I insert an image into an email, there is supposed to be an image resize menu in the lower right portion of the window and a message size indicator in the lower left of the window. Neither of these are appearing for me. I have tried attaching an image in a number of different ways with the "insert attachment at end of message" both on and off. Any ideas out there?

I've got the same problem. It only occurred after upgrading to Leopard.
Before it worked fine. (Leopard is for me not a success on this moment: my pages just stopped working, can't connect via bleutooth to my phone anymore using addressbook, eyeTV also stops at random and restarts are occurring often. I'm starting to get that 'trow this stupid thing out the window' feeling i had during my MS windows era.

Restart menu not available

I have an H520. Under Windows 8, I was able to get to the advanced restart options using the charm. I did this in order to disable driver signing so I could get Gbridge to work. Then I upgraded to 8.1. Now when I go to the restart options, on restarting, the monitor goes to sleep and I do not get any menu. Something is there because pressing enter causes the machine to reboot. I have tried accessing the BIOS (hold shift when shutting down then press F1 when it restarts) but nothing happens.
Do you have any advice?

If you are on Mac OSX running Time Machine with a Backup External Drive try this:
1. Close Firefox.
2. Navigate on your Hard Drive to User/Library/Application Support/Firefox/Profiles/~Folder that will say 'default'~/sessionstore.js
3. Click on sessionstore.js
4. Enter Time Machine.
5. Navigate to a 'Safe Time' just before Firefox crashed and lost your Tabs (like an hour or two).
6. When Time Machine goes back to the selected time, making sure "sessionstore.js" is still highlighted, click RESTORE on bottom right of Time Machine window.
7. You`ll be asked by Time Machine to either replace, rename or keep both files and seeing as your present "sessionstore.js" has lost all your Tabs, you`ll want to simply REPLACE it with the Time Machine Backup File.
8. Re-Open Firefox and you`ll see that the RESTORE PREVIOUS SESSION option is restored, click and Voila!
Worked for me-THANK THE GODS for Time Machine!!

Adjust Color option not available in Preview?

We scanned in some documents recently and need to adjust their contrast. Unfortunately, the option for Tools>Adjust Color is grayed out/unavailable. Any idea why this would be the case? The documents were scanned in on a Canon MX850.
Thanks.

Mine are all jpgs, i.e., photos scanned with an HP 4-in-1 scanner or photos taken with a Kodak digital camera, downloaded into EasyShare and saved as jpgs.
I'd always used Preview, prior to the Leopard upgrade, rather than HP PhotoSmart or the Kodak program for much of my editing because the "exposure" and the "sharpen image" features were much better and could often salvage an iffy photo, especially the old circa WW II sepia ones.

Line chart with different "colors": Values not available are displayed as 0

Hello,
I defined a line chart with more than one lines (aka "colors" in the chart wizzard) - each line representing the (monthly) values of a year. x axis are the 12 months of the year; y axis are the values.
When one defines such a line chart in BIP client there is a choice between sum, average and count for the data values.
This is no problem for my template as there is only one value per month/year - so I used sum.
The problem: for the actual year there are no values for future months . But bip nevertheless shows 0 for this month/year... Can one prevent this?
Regards
Peter

Solved it finally - unavailable values must explicitly be passed to the report with nothing contained in the value tag.

ITunes Radio Star Menu not available

When I am in iTunes Radio on my iPhone, my Star menu is greyed out. It was working before but now it's grey. I can't figure out why. Anyone have ideas??? Thanks!!!

I was having this same issue listening to the iTunes Top 100 stations. (2 different ones) Then, I tried a different non-specific station, Classic Rock Radio, and now I can use both of those options. So, I guess it depends on which station you are listiening to.

Imovie share menu "not available"

I've looked and can't find what must be a real simple explanation. I'm totally new to multimedia, and fairly new
to Mac.
I wanted to put an Obama speech on DVD so I can view it at lenght in compfort on my TV.
I downloaded the flv file, converted to mp4 using iSquint, imported to iMovie.
I get lots of frames. Can view starting at any point, and it looks and sounds good
Now, from whatever I can find, I should be able to export to iDVD in one or two ways using the "share" menu. But the share menu is completely grayed out, and nothing there is selectable.
Oh. I've got a relatively new intel imac, running leopard 10.5.2, and just did the software update.
What obvious thing am I missing? Is there another better approach (without buying new software)?
jrv is online now Report Post Reply With Quote

Thanks, Matt.
My continuing problem is that I can read faster than
I can watch and listen, and I couldn't find a written
"how to". But the little movie tutorial got me the
answer pretty quickly. (less time than I spent looking
for a written "how to").
One problem is, listening to (and watching) a movie tutorial
on any subject doesn't always answer a question. One doesn't
know till its over. But one can scan a written "how to".
Thanks aagain!
John V.

AppleWorks color menu not available

Similar Messages

Maybe you are looking for