Appleworks Data base

how do I open appleworks data base document in OS 10.7.5?

Bad news, I'm afraid. The only program which will open an AppleWorks database is Appleworks. Though Word Processing documents can be opened in Pages, and Spreadsheets in Numbers (and Draw documents in one version of EazyDraw), nothing whatever will open an AppleWorks database.
The only possibility for retrieving it is to find a way of running AppleWorks - for example if your Mac will run Snow Leopard (i.e. if you upgraded it from that and didn't buy it with a later system ready installed) you could install Snow Leopard and AppleWorks on an external hard disk and boot from that.
If you can do that you can export the database as ASCII text and import it into Bento or FileMaker Pro (or other databases) but you will lose all formatting and calculation fields will bring over the result, not the calculation.
More information here: http://www.wilmut.webspace.virginmedia.com/notes/aw/page5.html

Similar Messages

My appleworks data base is no longer supported. what can I use to open it

My appleworks data base is no longer supported. What can I use to open it

An older Mac that can boot into classic OS 9.
I had an early iMac Flatpanel from 2002 that was the last one I could boot into 9.2.2.

Converting Appleworks data bases

I have some data bases which I want to convert to other programs. What do you recommend--Excel? Or other programs? Any advice on how to do this? I greatly appreciate your help.
MacBook Pro Mac OS X (10.4.8)

I have some data bases which I want to convert to
other programs. What do you recommend--Excel? Or
other programs?
It depends on your needs. Excel is just a spreadsheet. So it's not good for things that a database is good at - data entry, reporting, searching, etc.
If you want to do more than store data in rows and columns I'd suggest looking at database programs like FileMaker Pro, 4D, Omnis, and friends.

What program to replace a Data Base program like old AppleWorks?

Not sure if this is the correct discussion board, but I would like to find out what applications people are using to replace the AppleWorks Data Base program. In the past I have worked with File Maker Pro and the AppleWorks program. I see nothing like that in either iBook or Numbers.
Thanks,
Dave

Like Dennis, I continue to use AppleWorks for what iWork doesn't do. I think that sooner or later a system upgrade may render AppleWorks useless or, at least, too unstable. I plan on keeping at least one Mac in the house running an OS AppleWorks works in.
In the meantime, I have left a few feedback posts to both the Numbers team or the Pages team.

Appleworks freezes when attempting to change a data base field

In a data base I created, trying to change a number in one field will freeze Appleworks. A number can be entered, but any attempt to delete, add to or change the data in that one field causes a freeze. This does not happen in any other field in this data base, nor in any other document, as far as I know. This is a fairly recent problem, and did not occur when the data base was first created.
Is there a way to fix this without losing all the data in that field?
Thanks!

Hi Yvan,
I'm sorry, but your link did not help my particular problem.
Can I make a list of the "freezing" field and an identifying second field, delete the problem field, and then re-enter the data in a newly created field? Being efficient (read lazy) I was trying to get away from having to re-enter all the data. There are only 384 records, but the thought of redoing even one field is mind-numbing.
Anyone else have a suggestion???
Thanks!

Data base fields in browse mode

Appleworks v 6.2.9
Have data base with 54 fields. List mode fine, but in browse mode
only first 34 are viewable and therefore available for data entry.
When tab key is punched after data entered in 34th field cursor goes
back to 1st field rather than 35th field. Command and down arrow keys
brings up next record. Is there a keyboard shortcut or any other way
to enter data in fields 34-54 in browse mode? Using list mode for
that is too confusing because 1st field identifies record name and
once past 34th field it is no longer viewable.

Hi Frank,
I'm assuming the Layout you are referring to is the default "Layout 1" that AppleWorks creates as you define the fields. This layout, or a "Standard" layout created through the New layout menu item in the Layout menu is a simple list of fields (with labels containing the field name) one above the other in a single column.
AppleWorks Database Layouts are restricted to a single page in the page size defined in Page Setup (File menu). With the default US Letter size page, at around 34 fields, the list runs into the bottom of the page, and no fields created after that are automatically inserted into the layout.
You can place more than 34 fields on a page, but you must contribute to the process.
With Layout 1 (or any other layout you wish to modify) showing, go Layout > Layout to put the document into Layout mode. (You can also do this by pressing shift-command-L.)
In Layout mode, select one or more of the fields (and labels) at the bottom of the page and drag them up and to the right into some empty space on the layout. New fields inserted onto the layout will be inserted in the space between the bottom-most field and the bottom of the layout/page, so the object of this exercise is to open up enough space at the bottom of your layout to insert the remaining 20 fields. It may take more tthan a single step to do this.
When you have all 54 fields on the page, rearrange them in the order and in the locations you want.
Note that the default tab order for a latout is from left to right then top to bottom, starting at the top left. If this order is not suitable, you can override it using the Tab Order... menu item in the Layout menu.
Regards,
Barry

I have a new imac21.5 how do I open Appleworks6 Data Base files?

I have a new imac21.5 how do I open Appleworks6 Data Base files? And how do I access Quicken files?

You won't be able to use AppleWorks on that computer. You will need to open your AW database files on an older computer that can run AW6 then export your database files to a standard text format such as CSV or tab-delimited.
You can then import those files into some other database program such as iData 3.1.18.
Quicken does not currently work with Lion but Intuit has announced they will issue a new version sometime this year. You can try using another application that can import Quicken's datafiles or export the data to format other applications can use. Or you can switch to Quicken Essentials that does work with Lion.

Apple Works Data Base Replacement

Recently got a MacBook Pro going from 10.6.8 to 10.8.3. I had used the data base program in Apple Works for MANY things. I was told I would need to buy iWorks, but I can't see that it has a data base program. Any suggestions would be greatly appreciated.

Running Appleworks in Snow Leopard Server installed into Parallels 8 for use in Lion or Mt. Lion:
[click on image to enlarge]
Apple is now selling Snow Leopard Server for $19.99 + sales tax & shipping costs at 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only).
[NOTE: Feel free to copy/paste this post in the future, as my participation will start to diminish, now that my work is done here! Regards...]

Is there a data base?

How can I transfer data base documents from Appleworks version 6.2.9 in my MacBook OS 10.4.11 to my new MacBook Pro with OS 10.8.2 and be able to use them on my new computer? How can I create new compatable data base documents?

More information:
Apple Works Documents
Apple Works Documents (2)

Transfer of xml file elements to data base columns

hi all,
i have to store xml file's data(element values) into the data base(table columns).
i heard that we can acheive this by XSU.
IS it is mediator between xml and db? if yes how to install it.
i tried something as below
with t as (
select xmltype('<Message-Header>
<Message-Id>1234</Message-Id>
<Sender-Company-ID>4569</Sender-Company-ID>
<Sender-Company-Name>abc company</Sender-Company-Nam
<Sender-User-ID>AA</Sender-User-ID>
<Recv-Company-ID>050</Recv-Company-ID>
<Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
<Creation-Time>20101019 15:59:39</Creation-Time>
</Message-Header>') as xml from dual
)but i am getting following error. can anybody explain about this
SQL> ed
Wrote file afiedt.buf
1 with t as (
2 select xmltype('<Message-Header>
3 <Message-Id>1234</Message-Id>
4 <Sender-Company-ID>4569</Sender-Company-ID>
5 <Sender-Company-Name>abc company</Sender-Company-Name>
6 <Sender-User-ID>AA</Sender-User-ID>
7 <Recv-Company-ID>050</Recv-Company-ID>
8 <Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
9 <Creation-Time>20101019 15:59:39</Creation-Time>
10 </Message-Header>') as xml from dual
11* )
SQL> /
with t as (
ERROR at line 1:
ORA-01041: internal error. hostdef extension doesn't existPlease help me..
my db version is Oracle Database 10g Release 10.2.0.1.0 - Production

Hi,
What are you trying to achieve with a single WITH clause and no SELECT?
Please see this from the documentation if you want to use it properly :
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_10002.htm#i2077142
Apart from its true purpose of subquery factoring, the WITH clause is often use here and there to simulate a table content, but you'll always need a SELECT.
Maybe that's what you were trying to do?
As for your question, starting with release 10.2, Oracle provides XMLTable to shred XML documents into relational structures.
For example,
with t as (
select xmltype('<Message-Header>
<Message-Id>1234</Message-Id>
<Sender-Company-ID>4569</Sender-Company-ID>
<Sender-Company-Name>abc company</Sender-Company-Name>
<Sender-User-ID>AA</Sender-User-ID>
<Recv-Company-ID>050</Recv-Company-ID>
<Recv-Company-Name>XYZ pvt.ltd</Recv-Company-Name>
<Creation-Time>20101019 15:59:39</Creation-Time>
</Message-Header>') as xml from dual
select x.*
from t,
     XMLTable(
      '/Message-Header'
      passing t.xml
      columns
        message_id          number       path 'Message-Id',
        sender_company_id   number       path 'Sender-Company-ID',
        sender_company_name varchar2(30) path 'Sender-Company-Name',
        sender_user_id      varchar2(30) path 'Sender-User-ID',
        recv_company_id     varchar2(30) path 'Recv-Company-ID',
        recv_company_name   varchar2(30) path 'Recv-Company-Name',
        creation_time       varchar2(30) path 'Creation-Time'
     ) x
;If you're working in PL/SQL, and the XML resides in a variable, you can directly do (with necessary datatype conversion in the SELECT) :
insert into your_table ( <your_columns_list> )
select <your_columns_list>
from XMLTable(
      '/Message-Header'
      passing your_xml_var
      columns
        message_id          number       path 'Message-Id',
        sender_company_id   number       path 'Sender-Company-ID',
        sender_company_name varchar2(30) path 'Sender-Company-Name',
        sender_user_id      varchar2(30) path 'Sender-User-ID',
        recv_company_id     varchar2(30) path 'Recv-Company-ID',
        recv_company_name   varchar2(30) path 'Recv-Company-Name',
        creation_time       varchar2(30) path 'Creation-Time'
     ) x
;

How to export a data as an XML file from oracle data base?

could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
Bala

SQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE    11.1.0.6.0      Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2    doc DBMS_XMLDOM.DOMDocument;
3    xdata XMLTYPE;
4
5    CURSOR xmlcur IS
6    SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7                                  'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8                              ,xmlelement("EmployeeNumber",e.empno)
9                              ,xmlelement("EmployeeName",e.ename)
10                              ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11                                                      ,xmlelement("Location",d.loc)
12                                         )
13                   )
14     FROM   emp e
15     ,      dept d
16     WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19    OPEN xmlcur;
20    FETCH xmlcur INTO xdata;
21    CLOSE xmlcur;
22    doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23    DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
.

Can any one help me to configure the mysql table to enable user expiration to function, I have tryed most things, but not dates are being passed back to the data base from the form

Im trying to build user expiration into my registration form, but I cant get the form to send back the date registering.
in my data base i have tried every thing from timestamp to datetime. I can get a timestamp but it is not functioning with the expiration?

just have a look at my tutorial Login tables: installation & configuration where the required column attributes are explained and where you can obtain a fully functional SQL dump for a typical ADDT "login" and (optionally) "login_stats" table.
BTW, "expiration" will have to be an "int" column.
Cheers,
Günter

Quota Generation not happen's on Pro data basis .

Dear experts,
Time evalution status - 1.
1.Employee service 0 - 5 years - 24 Days entitlement
2.Employee service 5 - 10 years - 29 days entitlement.
when generating quota for employee less than five years its calculating correctly.when come's to employee more than 5 years its not calculating on pro-data basis of employee joining month. Instead of Month it's looking at the year and calculating it.
DOJ of employee
Mar-09
Year
TOTAL quota accrued
2009
20
2010
24
2011
24
2012
24
2013
24
Client requirement
System calculation as of now
2014
28
29
Calculation part.
below screen shot show how system calculating and how client needed.
how this scenario can be configured.
Regards
Vinodh

Check the Deduction rule for that Quota
once check the Groupings for ESG and PSA
V_001P_ALL
V_503_ALL

How to stored data after clicking checkbox in data base table

REPORT ZT                                      .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
              smatnr FOR mseg-matnr MODIF ID m2,
              swerks FOR mard-werks MODIF ID m3,
              slgort FOR mard-lgort MODIF ID m4,
              slgpbe FOR mard-lgpbe MODIF ID m5,
              scharg FOR mseg-charg MODIF ID m6,
              sbwart FOR mseg-bwart MODIF ID m7,
              skostl FOR mseg-kostl MODIF ID m8,
              saufnr FOR mseg-aufnr MODIF ID m9,
              srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
          pse RADIOBUTTON GROUP radi,
          bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*&      Form get_data
      Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
   msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
              JOIN mkpf ON msegmblnr EQ mkpfmblnr
              WHERE mseg~matnr IN smatnr.
ENDFORM.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
     t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title   TYPE lvc_title,
       w_comm    TYPE slis_formname,
       w_status TYPE slis_formname,
       x_layout TYPE slis_layout_alv,
       t_event    TYPE slis_t_event,
       t_fieldcat TYPE slis_t_fieldcat_alv,
       t_sort     TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
       1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
       4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
       5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
       6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
       9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
   14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   i_callback_program       = V_REPID
   it_fieldcat              = t_fieldcat
   is_layout                = x_layout
   it_sort                  = t_sort
   i_callback_pf_status_set = w_status
   i_callback_user_command = w_comm
   i_save                   = 'X'
   it_events                = t_event
   i_grid_title             = w_title
TABLES
   t_outtab                 = t_data
EXCEPTIONS
   program_error            = 1
   OTHERS                   = 2.
IF sy-subrc <> 0.
   MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
     t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
       x_event   TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event   TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
     t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
     p_outputlen p_noout
     p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
     p_hotspot p_showasicon p_checkbox p_edit
     p_dosum
     t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
   wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
   wa_fieldcat-ref_tabname = p_ref_tabname.
   IF p_ref_fieldname EQ space.
     wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
   ELSE.
     wa_fieldcat-ref_fieldname =   p_ref_fieldname.
   ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
   wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
   wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
   wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
   wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
   wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
   wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
   wa_fieldcat-INPUT     = 'X'.
   wa_fieldcat-EDIT     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
     i_logo             = 'TRVPICTURE04'
   it_list_commentary = t_heading.
ENDFORM.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
FORM user_command USING r_ucomm     LIKE sy-ucomm
     rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
   IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR.                              " U CAN DELETE
SY-MSGV2 = WA-MATNR.                              " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888'          " U CAN DELETE
        WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
   INSERT ZTABLE.
   ENDIF.
endloop.
ENDCASE.
ENDFORM.                    "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.

Hi Lakshmi,
       Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram...

Differnace b/w SID and Global data base name

please tell me what is differance b/w SID and global data base name.

Hi,
Oracle System Identifier (SID)
A name that identifies a specific instance of a running pre-release 8.1 Oracle database. For any database, there is at least one instance referencing the database.
For pre-release 8.1 databases, SID is used to identify the database. The SID is included in the connect descriptor of a tnsnames.ora file and in the definition of the listener in the listener.ora file.
http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14213/glossary.htm#i433004
Global database name
The full name of the database which uniquely identifies it from any other database. The global database name is of the form "database_name.database_domain," for example, sales.us.acme.com.
The database name portion, sales, is a simple name you wish to call your database. The database domain portion, us.acme.com, specifies the database domain in which the database is located, making the global database name unique. When possible, Oracle Corporation recommends that your database domain mirror the network domain.
The global database name is the default service name of the database, as specified by the SERVICE_NAMES parameter in the initialization parameter file.
http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14213/glossary.htm#i435858
Adith

Appleworks Data base

Similar Messages

Maybe you are looking for