AppleWorks not opening saved files
AppleWorks (on OS 9) can still open files, but now when it saves any new document, it won't allow it to open again. When I try to open any newly saved file, it throws up a dialog box that says "Unexpected end of file." twice.
Old documents can be opened but new ones can't.
What could be the problem and how (if at all possible) can it be fixed?
I've already tries rebuilding the Desktop file and deleting AppleWorks preferences files but it doesn't seem to change. Peggy (from the AppleWorks forum) suggested posting it here as it may be more of an OS 9 specific problem.
"When I try to open any newly saved file, it throws up a dialog box that says "Unexpected end of file." twice."
An “Unexpected End of File Encountered” alert message means that either the end of file marker is damaged or missing, or the end of file data does not reach the location defined by the end of file marker in a document. Usually this results when the file is incompletely saved or the application unexpectedly quits while the file is being saved. However, this error can occur during application launch, or when saving or printing.
If, after you receive the alert message, the document size is dramatically lower than the original size, the chances of recovery are minimal. It is recommended to use a backup copy of this document.
Similar Messages
-
Waveburner not opening saved files
Hi guys
have had some major problems with my Waveburner from Logic 9 Upgrade. When i go to save my project that's no bother but when i go to open the project a warning box comes up and says
"Bounce wb3. Waveburner cannot open this file type".... what's the craic there then.. would appreciate help on the as i have lost many hours of work
cheers
SeanIt was my problem too. This is the answer:
Hi,
I have a new update of logic studio 9 with included waveburner. When I tried to open my previous waveburner files I got a 'non recognition' error message. Reading other posts on this forum, I first tried to find a relevant plist, couldn't. Tried a fresh install from the install disk, with just waveburner, that didn't work. Downloaded Amnesia as a free 15 day trial from koingo software, uninstalled waveburner using Amnesia, and then again did a fresh install from the install disk with just waveburner. That worked, and waveburner now seems to be functioning. - I'm posting this for the info of others in the same boat (apparently a common problem),
Good luck all, -
can not open saved files on my desktop with new reader
Mac HD/Library/Internet Plug-ins
Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files
Mac HD/Applications
Trash the Adobe Reader app
Empty the trash.
Download the FULL installer and reinstall Reader: http://get.adobe.com/reader/enterprise/
Launch Reader and accept the license agreement.
You will now be able to download and open PDFs.
Note: the files which say "damaged" are just that. You'll need to trash them, as they cannot be repaired. -
Adobe reader will not open pdf files I have saved as, or, export as pdf to my desktop (latest Maverick). The same file does open when I am on the source website (i.e. user manuals etc.). Why?
iMac G4, Mac OS X (10.4.9)
Make sure you have the latest Adobe Reader installed for your OS.
http://www.adobe.com/support/downloads/product.jsp?platform=macintosh&product=10
Did you try using Preview. If you control click on the PDF on your desktop you can use the "open with" option. -
Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?
I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan -
Find and replace Dreamweaver mx 2004 problem: not opening saved queries
Dreamweaver mx 2004 is not opening saved queries! I use find and replace often and uses to save code replacements to reuse
it. But now when I open the saved query I have 2 situations:
1) comes completely blank
2) or only shows truncated text or code in fields.
I opened the dwr file in text editor and seems to be fine, I mean information saved is there.
Tried recreating cache, or deleting caché, tried saving new or overwritting existant ones, tried saving into a completely different location,
tried in other site definition. Nothing seems to work...Which FTP app did your predecessor use to upload files? If it's still on your work station, it should contain the log-in credentials.
You'll find a few utilities online for revealing passwords
http://www.rixler.com/?gclid=CJeUxd775LkCFWZk7AodyiAAaQ
Nancy O. -
I had worked on the Illustrator CC 2014 with 19 slices of PDF presentation file for my assignment even in 15 minutes ago, and before closing it previous time, I have saved the file, and restarted my laptop, tried to open the PDF file again, but the message of "Could not open the file" was appeared each time I have tried to open it. I wonder what is wrong with it. And I do really have to working on it right now. Here I am attaching the pictures and please solve this problem. Thank you
Does it open in Acrobat?
Did it really complete saving? Or did it crash or did you abort the saving process?
In case you can open it in Acrobat, the PDF part of the file is still intact. Then you could create a niew file in Illustrator and place your file in it. Of course then most editing features will be lost, but at least you've got the content.
Use this script to place all pages at once:
Introducing: Open Multi-Page PDF win/mac -
After the report files were moved to the directory under root in Linux, I can not open the file(.rdf) in my working directory in linux even though it doesn't work in the report builder in window.(it used to work fine)
error message the following;
rep-0110:unable to open file 'c:\documents and settings\myhome\desktop\invoice10.rdf
rep-1070:error while opening or saving a documents
can you tell me what it is the solution for that?
Message was edited by:
JinI think I have to recompile the files again.
I found the following solution but i do not know where do i write this script(Dos) and how to run it.
can you tell me more detail?
For Windows
Forms/Reports 6i
REM WINDOWS COMPILE FORMS
::compile_forms.bat
cls
Echo compiling Forms....
for %%f IN (*.fmb) do ifcmp60 userid=scott/tiger@v817 module=%%f batch=yes
module_type=form compile_all=yes window_state=minimize
ECHO FINISHED COMPILING
REM WINDOWS COMPILE REPORT
::compile_report.bat
cls
Echo compiling Report .....
for %%f IN (*.rdf) do RWCON60 userid=scott/tiger@v817 batch=yes source=%%f
stype=rdffile DTYPE=REPFILE OVERWRITE=yes logfile=log.txt
ECHO FINISHED COMPILINGMessage was edited by:
Jin
Message was edited by:
Jin
Message was edited by:
Jin -
I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox). I have the users grid and oracle11g. Add groups and install grid infrastructure first as a grid user and install database as oracle user as in documentation successfully.
I have following users and groups as
[grid@orcl11g ~]$ id grid
uid=501(grid) gid=502(oinstall) groups=502(oinstall),492(vboxsf),501(grid),503(dba),505(asmdba),506(asmadmin),507(asmoper)
[grid@orcl11g ~]$ id oracle11g
uid=500(oracle11g) gid=502(oinstall) groups=502(oinstall),500(oracle11g),492(vboxsf),503(dba),504(oper),505(asmdba)
.bash_profile edited for oracle11g user as
"export TMP=/tmp
export ORACLE_HOSTNAME=orcl11g
export ORACLE_UNQNAME=ora11g
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/dbhome_1
export ORACLE_SID=ora11g
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
.bash_profile edited for grid user as
"export TMP=/tmp
export ORACLE_HOSTNAME=orcl11g
export ORACLE_UNQNAME=+ASM
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=$ORACLE_BASE/product/11.2.0/grid
export GRID_HOME=$ORACLE_BASE/product/11.2.0/grid
export ORACLE_SID=+ASM
export PATH=$PATH:$ORACLE_HOME/bin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib;
export CLASSPATH=$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib;
When I log on as grid user. I check the followings:
[grid@orcl11g ~]$ crsctl check has
CRS-4638: Oracle High Availability Services is online
[grid@orcl11g ~]$ srvctl status database -d ora11g
Database is running.
[grid@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:17:37 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management option
SQL> select status from v$instance;
STATUS
STARTED
Till here everything seems to be OK!!!!
When I log as oracle user. I check the followings:
[oracle11g@orcl11g ~]$ sqlplus sys as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 25 19:21:46 2014
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter password:
Connected to an idle instance.
SQL> select status from v$instance;
select status from v$instance
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/initORA11G.ora'
Also when I log on as a grid user again and use following commands to shutdown and start database again the STATUS of instance is again STARTED not OPEN.
[grid@orcl11g ~]$ srvctl stop database -d ora11g -o normal
[grid@orcl11g ~]$ srvctl start database -d ora11g
And also when I edit /etc/oratab file. I change N to Y for +ASM. But when restart system it seems not changed value is N again.
+ASM:/u01/app/grid/product/11.2.0/grid:N # line added by Agent
ora11g:/u01/app/oracle/product/11.2.0/dbhome_1:Y
NOW QUESTIONS!!!!!
1. Why I can't change the status of database to OPEN as grid user?
2. The status is always STARTED when querying v$instance. İs it status of +ASM or database?
3. When checking database as grid user it seems to be Database runnning... If running why it is not in OPEN state? What is running means here?
4. When I log on as oracle user and query v$instance, then error shown above occured. And also when startup the database then another error occured as in above. WHY?
5. When I edit /etc/oratab file manually why second row saved but the first one is changed after restart the system?
6. Normally, which user have to start, stop or manage database? I think that oracle user is necessary for managing database and the grid user is only for managing ASM and Oracle Restart.
PLEASE HELP ME TO SOLVE THIS CHAOTİC SİTUATİON!!!
Thanks,
DBA_84I have installed an Oracle 11gR2 on Oracle Linux Server 6.6 (Virtualbox)
Pl identify exact version of 11gR2 to 4 decimal places. As noted in your other thread - Failed to start oracle-ohasd, error: Inappropriate ioctl for device ohasd failed to start at roothas.pl - you will need a minimum version of 11.2.0.3 for Linux 6.x - using a lower version may result in unexpected issues or problems. -
IPhoto will not open iDraw files - why are the files "unrecognized"?
iPhoto will not open iDraw files - why are the files "unrecognized"?
What file format are you saving the files as?
OT -
Adobe Captivate could not open "the file" Ensure that:
Brand spanking new installation of the trail version of Captivate 5.5.
Try to open a file a client sent to me.
Receive message
Adobe Captivate could not open "the file" Ensure that:
-The files is not open already
- The file is not damanged.
-The hard disk has suffecient available space
-The system has suffeicent resources.
Researched the blog and tried 2 suggestions:
1. Clearing the cache. Did not work. I do not have a cache folder. I haven't created a Captivate 5.5 project. I'm just trying to open a file sent to me.
2. Tried deleted bak file. Didn't work. Captivate 5 keeps recreating the file.
Other facts:
Other people have been able to download the trial version and open the file.
I have Captivate 4 on my machine.
Any suggestions?
ThanksI'm experiencing about the same problem:
I made a software demo using Macromedia Captivate on computer 1 en sent it by e-mail to computer 2.
On computer 2 I installed a Captivate 5.5 trial and I want to open the file in 5.5.
The file is not locked as far as I know (I right-clicked the file > properties > unlock)
I do have sufficiënt available space and resources. The file contains 135 slides but is not too large as I tried to do the same thing with a 50-slide file > same error message.
I tried creating a new blank project > I copied the slides into the blank project, saved again on a local drive, sent it to computer 2 again, but same error message.
Please help, I'm getting desperate.
Marieke -
My Preview, suddenly, will not open JPG files. It will open a file if it is saved as a PDF, but not JPG. I have downloaded nothing nor installed apps as I am a Luddite. Does anyone know the deal? Thank you.
So ummm.....which app is opening up your PDF files?
If you want Preview to open your PDF files, do the following: Highlight your file>File>Get Info>
In the Get Info window, scroll down to "Open with:"
Select the Preview app to open the file.
Click the "Change All..." button if you want to "Use this application to open all documents like this.” -
#3125 error. I can not open the file
We work on a Mac and a Win machine. We share the files via a NAS. We now encounter the problem that the muse-site saved by the Win machine can no longer be openend by the Mac. (#3125 error. I can not open the file). The only option to continue is to work via the Win machine.... ;-((( Please give us a solution. Ed
A 3125 error indicates the operating system returned an error when Muse attempted to open the file.
It's highly unlikely there's anything wrong with the file. If you haven't already confirmed, if you copy the file to the Mac's local drive it will open fine.
I'm suspicious of file/folder permissions. Is it possible the account used to mount and write to the NAS from Windows has different user permissions than the account that's attempting to read it on the Mac? I could theorize a 3125 error might occur if one user with the necessary permissions wrote a file to the NAS and then a second user with insufficient permissions attempted to open it.
Also, two users cannot simultaneously open the same .muse file on the NAS. Is that what's being attempted in this case? Muse goes to great lengths to attempt to prevent this and should put up an error about the file already being open in another copy of Muse. However, how that's detected is dependent on OS APIs that have subtly different behaviors on different servers and server protocols. -
When I try to install Firefox, I get a "can not open output file" error. I was using Firefox before and it stopped working, so I uninstalled. Cannot re-install now.
== This happened ==
Every time Firefox opened
== I tried to download firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS-RTC LM 8)When you click the download link on [http://getfirefox.com GetFirefox.com], you should be asked if you wish to Run or Save the file. If the described situation happens when trying to Run the download, try instead to Save it and put the file on your Desktop or a similar place where you are certain that you can find it again.
When the download is complete, try double-clicking the downloaded file in the normal Windows Explorer (browse your way to the file from My Computer). This should start the installation.
If you notice in the Explorer window that the file seems to be lacking the Firefox orange/blue icon, rightclick the file and select Properties. The picture should look somewhat like the attached picture (except that mine's in danish, but that is irrelevant) if saved correctly - if it does NOT look like this, please describe the contents or attach a screenshot of the box. Especially what it says under "File type" - it should be "Program"; if it's not, we'll have to look into what the problem could be here.
Slightly off-topic, your Internet Explorer seems to be quite a bit out of date (IE 6, where current version is IE 8), so I would strongly recommend that you try to run Windows Update to get your system updated. If this is a company system (like a Terminal Server thin client machine), this may not be possible, and your system administrator will most likely have to help you. -
I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.
Have you tried restoring the Preferences yet?
Maybe you are looking for
-
It's driving me crazy; I have a firewire, but it isn't compatible with the ports on the new macbook pro with retina display. Thanks for your help!
-
Default vendor is coming in J1IG transaction while capturing excise invoice
Hi, While capturing excise invoice at depot by using J1IG transaction, i am getting default custom vendor automatically. This is for STO transfer i am capturing excise. I have maintained some other custom vendor in the p.o. Pls. let me know from wher
-
What motherboard does the hp pavilion dv6-2140ca have?
Hey guys. Does anyone know what motherboard the HP Pavilion dv6-2140ca has? I can't find the service manual anywhere. My bios is corrupt, and would't fix after a reflash or changing the CMOS battery. Time for a motherboard replacement. Thanks for
-
How can I get rid of FCP?
Hi There, FCP 5 will no longer launch on my G5 dual 1.8 OSX 10.3.9. I've repaired permissions etc. with no luck. All I want to do now is delete the program, however whenever I drag it to the trash (and try to empty) I get a message saying that EDL Ex
-
I found a folder entitled "private" hidden in my hd today using the program "WhatSize?". When I tried to find it manually through the hd, it remained hidden. I'm wondering if this is a trojan planted on my hd, or has it always been there and I'm just