Appleworks on intel imac?

Hi,
Has anybody any experience of how Appleworks runs on the intel macs?
I just bought a iMac 1.83 core duo bit although all my documents are Appleworks i don't want to install it if it runs really slow?

Just type the word intel into the search box on this page or go to awug.org, and you'll see it works great.

Similar Messages

Upgrade of Appleworks to New IMac

Does any know if Apple offers any discount or incentive if you want to upgraqde Appleworks from an older IMac to the new Intel IMac?
Thanks,

Welcome to Apple Discussions, WMombert!
What do you mean by Upgrade? You older iMac is likely to be running the most current version of AW aready. That version will run fine on your new iMac. Apple didn't (and almost certainly won't) upgrade AW for intel macs. Just remember to erase AW off you older iMac if you install it on the new one. You are only licensed for one machine at a time.

Software compatibility with Intel iMac

I know it's rather early in the game, as it were, but does anyone know if Appleworks comes bundled with the new Intel iMacs. I don't see it listed, but could this be an oversight? Or is Apple getting away from it? I have used it for quite some time and I have many documents in Appleworks, but have no idea what I'd do with them if I got a new Intel iMac--sure, convert them, but to what? I don't look forward to having to "tweak" each doc, as I have had to do in the past when converting from one program to another . . . . Anyone know?

Not yet. Peggy, one of the Appleworks mavens here, is at macworld and is going to try to find out for us.

Installing Appleworks on new iMac

I just replaced my iMac G5 (running Tiger) with a new Intel-based iMac (also running Tiger). The G5 came with Appleworks bundled; the new one did not. I'm reasonably sure that it is legal for me to install Appleworks on the new iMac (as long as I remove it from the old one); I just don't know how. It won't allow me to install from the install/restore CDs that came with the G5. Can I just copy the Appleworks (US English) folder to the Applications folder on the new machine?

Hi
You should be able to do just that, yes, using firewire. Try just dragging & dropping from 1 computer to the other, if that fails:
Shut down both computers
Connect computers using 6-pin to 6-pin firewire cable.
Boot up Intel iMac normally.
Boot up G5 holding down T until firewire symbol appears on screen.
Navigate to HD/Applications on Intel.
Navigate to HD/Applications on G5.
Put windows side-by-side.
Drag & drop Appleworks folder into Intel's Applications folder.
Eject G5's disk icon & shutdown G5.
Shut down Intel.
Disconnect wire.
One more thing, make sure it's Appleworks 6.2.4 or above.
Steve

Should I Updrade to the Intel iMac?

My dad is thinking about upgrading to an Intel iMac. All he'll use it for is word processing and e-mail. From those that have one, how good are they? Any problems? Also, my dad did all his writing in Appleworks 6. Is That installed on the Intel iMac?

Actually, AppleWorks isn't a universal binary, and although it runs okay for me, it's awaful slow. Instead of purchasing it for $79, you could just get iWork '06 for $20 more. Pages, although the interface is different from AppleWorks's, is a good word processor, and doesn't take too long to get used to.
Or, as an alternative, you could use TextEdit. Not really.....

Appleworks & new Intel processor

A salesman at MicroCenter told me that Appleworks doesn't work "right" with the new Intel proc. I am ready to buy a new iMac but I like Appleworks so much more than MS. Is this true? Will I have trouble with Appleworks 6? It's a deal breaker for me.

Welcome to Apple Discussions RED PT
The only reason I can think of as to why that salesman would think AppleWorks "doesn't work right" on an Intel Mac is because it is no longer bundled with the "consumer" Macs. AppleWorks 6 will run & run well through Rosetta on an Intel Mac. Those who have used AppleWorks 6 on Intel Macs find it runs as well, in some cases better, as on a G5 Mac. The editors of the AppleWorks User Group Journal did extensive testing on side-by-side G5 & Intel iMacs. You can download a PDF copy of their results at http://www.awug.org/.

Where can I get a new hard drive for my intel imac? **** thing dumped, less than 3 years old.

This is my first mac and the **** hard drive crashed in only 2+ years and of course the waranty is expired. Can I replace the hard drive with any 3.5" replacement or do I need something special. And if I do where can I get it? I didn't see anything specifically for an intel imac at apple store. I don't want to pay apple to install it, already spent enough money on this disappointing purchase.

any 3.5" Sata drive will do. I recommend http://www.macsales.com/, or http://www.newegg.com/

How do I use my Intel iMac to see the screen on my old G5

The screen on my old G5 is fading fast and I would like to connect it to my newer Intel iMac and use it's screen to be able to see what i'm doing. Is there a way to do that?

Fortunately I was just able to make out the Screen Sharing check box on my older Mac. As soon as I checked it and opened the file on the newer Mac there was the screen. Perfect. Thanks so much.

Emagic mt4 and intel iMac does not work with 10.4.5

Hi there,
after updating my iMac on 10.4.5 my MT4 does not work any longer. It is still shown in the system profiler! But that`s it! After I`ve installed the latest driver (emagic v1.7), it was not shown in the audio/midi preferences. On my G4 with 10.3.9 it is still working properly. I have tried to use it with Garage Band 3, while I am waiting for Logic Pro 7.2 . It worked in the begining, but now the USB connection on the MT4 does not light up, but the midi devices. My question is: Do I need a driver using Logic Pro 7.2 with an Intel iMac? Includes the update the driver for Emagic MT4?
thanks a lot for any reply, experiences and clues
jay markus
iMac Intel core 20'' Mac OS X (10.4.5)

Hi Glyn,
I will try to get some driver information of apple. Emagic is apple now, so who else could that know?! I use an m-audio fw audio-interface. For that m-audio got a driver and it works by now. Fortunately! I will tell you if apple got a clue.
Thanks for reply ( So I am not the only one in universe with that problem!)
Best regards
Jay
iMac Intel core 20'' Mac OS X (10.4.5)

Intel iMac won't recognize external display with Dynex mini-DVI adapter

I've got an original Intel iMac with a Mini-DVI connection on the back. I'm attempting to hook it up to an external display (a plasma screen, in fact). I picked up a Dynex Mini DVI to Video Adapter DX-AP100 for Apple. This connector has a mini-DVI connector on one end, and both a video-out and an S-video-out on the other.
When attempting to use the adapter, the iMac does not recognize that there is an external display connected. Here are the facts:
The external display: I've tried this with a Panasonic Plasma screen connected directly through S-video, as well as a Pioneer receiver (one that switches video) connected both through s-video and composite video. And yes, I've got the settings on the TV correct. I've also tried this with a Polaroid LCD TV connected via S-video and composite video.
I did notice that when I click "Detect Displays" while the Plasma was connected, the plasma briefly "flashed", implying SOMETHING was happening, but still no dice.
Anyone have any experience with this Dynex DX-AP100 that could share some wisdom?
OS: v10.5.6
System Profiler:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
EFI Driver Version: 01.00.068
Displays:
iMac:
Resolution: 1440 x 900
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
Display Connector:
Status: No display connected

Yeah, I realize S-video is limiting, but I'm trying to keep things as simple as possible. The TV is mounted to the wall and there are not currently any DVI or HDMI cables coming out of it. There's an S-video input from my receiver that I'd prefer to use since it's readily accessible already. In the end my goal is to use Netflix "Watch Now" on the TV, so I'm not too worried about video quality.
and before someone asks if I considered that the receiver's S-video input might be the problem...I tried taking the s-video wire from the stereo and plugging it directly into the adapter. No dice.
ONE ADDITIONAL PIECE of information...while trying to get this to work on an LCD monitor, I plugged the composite video connection from the TV into the adapter. Suddenly the Mac recognized an additional monitor, but it saw it as a VGA monitor, not as s-video or composite video, and no signal went to the TV.
I'm considering trading in this adapter for a mini-DVI to VGA adapter, but that really won't help me with the connection to the TV.

Is there a way to connect and view an external monitor only on my Intel iMac?

I have an Acer 15.6" monitor connected to my Intel iMac via VGA cable and Mini-DVI to VGA adapter. I am running Lion (V10 7.3) and would like to direct my image to the external display only. The preferences pane does not offer that option. Is there some way to do it?

Do you have a desktop machine running iTunes?
If so then yes, setup home sharing and you can stream anything in your iTunes library to your iPad.
It works good.

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

An Intel iMac AND a MacBook Pro for Logic Pro?

I am torturing myself over this issue lately so any input you guys could offer would be welcome!
This is the situation:
After 3 months of serious debating whether to purchase a 20" Intel iMac or a MacBook Pro for Logic Pro, I went ahead about 3 weeks ago and got the iMac. My reasoning behind this was that even though I found the portability of the MBP very desirable, the iMac simply represented a better value with the big screen and bigger hard drive. Since getting it, I must say I love this machine and I have not had one single problem with it. Logic 7.2 runs like a dream on it. By the way, aside from maintaing my iTunes Library, occasional iLife stuff and web surfing with Safari, this iMac is for music production only.
But here's the problem:
Still, I can't seem to shake the desire for OCCASSIONAL portability. Keep in mind, I am only a "serious" music hobbyist; I create instrumental hip-hop, trip-hop, electronica style of music mainly with software instruments, loops and breakbeats. So needless to say, I don't tour or do a lot of travelling. But the prospect of being able to compose tracks or make beats in Logic anywhere is DESIRABLE to say the least. I could compose while sitting on the couch watching a game or laying in bed - even though I have no idea of how often I'd actually do that, just having the ability to do it is VERY APPEALING to me. Throw in the fact that the iMac currently shares deskspace with a PC that my wife uses - meaning that I often have to stop what I'm doing to let her use the space. With a laptop, I could move and still continue my flow. Lastly, I unfortunately have bad knees and a bad back so after a couple of hours (or 3 or 4) of sitting at the desk working on Logic, I am seriously hurting. Not comfortable at all. At least owning a MacBook would give me the option to move around to some place more comfortable if I desire.
So...
Even though I recently bought a wonderful iMac that works great, I'm seriously considering getting a 1.83 MBP with at least 1GB of RAM and the 100GB/7200 RPM drive to accompany it just for the portability factor. Sure, I could get a used G4 PowerBook or iBook, but all I own is the Universal Binary of Logic Pro; I would have a hard time accepting the decrease in speed I've gotten use to on the Core Duo. Besides, I inherently have a problem buying something (even used) that I know is old and out of date when the latest and greatest is available.
So here is the $25,000 question: Am I nuts for even considering this? Am I placing too much of a premium on the portability as I would use it?
This could easily be justified if I was a working musician on the road, but that ain't me. And you can believe that I'm definately not rich and thus don't have money lying around.
But I have obsessed over this so much lately, I feel that I almost have to get it just to put my mind at ease! I even briefly considered putting the iMac on eBay and just buying a MBP to replace it, but I love the screen real estate I get with the 20" iMac and I question if I'll be truly satisfied with a 15.4" screen FULL TIME. 17" might be better, but I doubt if I can wait until June for them to arrive. In addition, everything would connected via my wireless LAN and .Mac so file sharing should not be an issue.
Help!!!
What would you do? Sell the iMac or just get a MBP as cheap as I can?
Opinions, Please!
20" iMac Core Duo, 2GHz, 2 GB RAM, 250 GB HD, 128MB VRAM Mac OS X (10.4.4)

I love the portability my powerbook gives me. You can use a PB in your setup. You can run an external monitor for either PB or MBP. You can node. Universal Binary menas it is an application which has the components written for both PPC and Intel chips-so you don't need to do conversion. Nodes won't require you buy a nother license. so the answer is down to how much the 2 upgrades and 1 crossgrades will set you back vs how much use you'll get out of them. IMO the iMac is inexpensive (I mean that in a good way-worth hooding on to). Maybe just look at a refurb PB unless you really have the extra cash.

Intel iMac randomly relaunching Finder. RAM problem?

Several months ago I bought a new 3.06 GHz Intel iMac with 2GB of RAM. I also bought CS4 so I maxed out my RAM at 4GB with a 2x2GB RAM kit from Other World Computing.
I've noticed in the lately that everything will suddenly hang, the Dock won't appear when I cursor to the bottom, and then my desktop pic will change. I have my prefs set to choose a random one each day but this isn't happening at the right time, it's random. Not only that but if I open Dashboard after that it has to reload all of my widgets again. Plus any docked Finder or app windows pop back out to the desktop. It's like the Finder is being relaunched or something.
I'm wondering if this could be an issue with bad RAM or not having enough. With email, browser, FTP, time logger, and a few smaller apps going I can never really have more than a couple of the CS4 apps open without things getting sluggish. I try to avoid having more than 2 open at any one time. I've even dropped Photoshop's RAM usage settings from 70% to 60% to see if it makes any difference.
The problem is still happening and it seems to be happening more frequently. Things just relaunched and I went into Mail to minimize an email window. As soon as I clicked the yellow button things hanged again but not in the same way. No windows would minimize, the Dock wouldn't appear and I couldn't switch Spaces. When I went to restart, as soon as my cursor rolled over the Dock item in the Apple menu it stalled there for a short time before I was able to go down to restart. Then the restart sequence stalled and I had to force a shut down.
This is really frustrating as I was expecting a great new machine and software to replace my aging PowerMac G4 and older apps. Is there a way to test for bad RAM or does this sound like a known issue with CS4 or iMacs in general? I don't have the original 2x1GB RAM sticks any more, I sold them after installing my new RAM.
Any help would be greatly appreciated.

I've been trying a few things here and there when I've had time, giving time in between to see if the problem reoccurs. So far I've done the following:
1. Repaired Permissions. No effect.
2. Used Onyx to clean the System, User and Font cache options listed by default. It also told me that S.M.A.R.T., startup volume, Permissions and Prefs are all ok. No effect.
3. I removed the RAM, inspected the boards and the slots. Can't see any sort of damage to either. I replaced the boards but swapped slots. Both boards are firmly seated. Also no effect.
I'm going to try running 1 board at a time, swapping slots if the problem continues. If it does I'll try creating a 2nd admin account and go from there.
I've also noticed at times when the hang happens it seems to be when I click on an item in my Dock (usually a folder of items). There have also been times that after it happens I'll switch to another space and the windows for different apps will have disappeared. The apps are still open but if I try choosing the missing window under View or Window they still won't appear. Same goes with trying to use Show All under the Finder menu.

Intel iMac stuck at desktop screen, no menu bar, no finder, spinning ball

Hi, I've just run into a serious problem with my 24" Intel iMac not starting up properly. At first it was getting stuck on the gray screen, then I got it to the blue screen, and now finally I can get it as far as loading the desktop picture, the cursor comes up and is responsive to the mouse, but has now become the spinning beachball. There is no menu bar, and the finder will not load. It's been in this state for about ten minutes. What I did to get it to this state is:
1. Disconnect all peripherals. I'm using an Apple wireless keyboard and mighty mouse, too.
2. Reset the PRAM.
3. Reset the PMU.
4. Used the installation disc to run Apple Hardware Test (the short version) successfully...no problems.
5. Used the installation disc to run Disk First Aid. Corrected a minor problem with the file structure.
6. Used the installation disc to run Disk First Aid. Repaired permissions.
7. Performed a Safe Boot, and got to the log-in screen, did not log in, but restarted normally as suggested in one of the Apple support articles.
8. Am now staring at my desktop picture without the menu bar or the Finder, but the spinning beachball is chugging along and is responsive to my mouse.
If it is of any help, I've noticed for several months that the computer would occasionally fail to wake from sleep, and I'd need to force a shut down by holding the power button for several seconds. Could this have been a precursor to the current problem?
At this point, I'm not certain which version of 10.5 I have, because I can't check. But I've installed all the Apple updates that have come through, so I must be at the current version of 10.5. I can't remember exactly how much RAM I have installed, either, but it might be 3 GB. I installed a second memory module at the time of purchase, which I bought from Crucial.com.
I'm having to write this on my ancient PowerBook G4, which is still performing admirably under OS X 10.4.11. Thanks for any help or suggestions anyone can provide! : )

It appears to have been a short of some sort on my power supply...it blew a capacitor somehow, though I don't know how/when that happened. Computer is on a surge protector, and generally sleeps during day while I'm away, but no power outages or other electrical issues occurred while I was out that I'm aware of.
Anyway, I had a new power supply installed by an Apple certified technician...opted not to do it myself...and discovered that the HD is perfectly fine. No data loss. Phew! Just two weeks w/o my computer, and no way to recover backup files on Time Capsule in the meantime.
Thanks for all the help and advice!

Appleworks on intel imac?

Similar Messages

Maybe you are looking for