Appleworks will not open on download

Having downloaded the OS X version onto my new IMAC, I get the following
"default location required for this install could not be found.
This install will be cancelled.
Now when I downloaded this from the Apple web site, it all seemed to be fairly automated. I was never asked where I wanted it installed to. I assume that it will just sit on my desk top. It opens, I get the Read Me but the application wont install.
A little weird. Just switched after 10 years on PC..........
Any ideas out there??
Thanks

AppleWorks (the application) is not available as a download.
It used to be bundled with various Apple computers, but that ceased with the new Intel-based models.
AppleWorks is still available as a separate purchase from various stores including the Apple Stores.
From your letter, it looks like you downloaded an updater for AppleWorks, thinking that it was the actual application. The updater looked for the original application, couldn't find it, and therefore gave you the message about not being able to find the location.
If you do have a copy of AppleWorks, it should be in your Applications folder.
iMac Flat 800MHz Mac OS X (10.3.9)

Similar Messages

PDF files will not open or download on my mac book pro

pdf files will not open or download on my mac book pro, cannot read bank statements etc. Any solutions would be grear

Did you try using a different browser?

ITunes 11.1 will not open after downloading.

iTunes 11.1 will not open after downloading; iTunes64.msi is "missing". I can't uninstall the present iTunes version (11.0.5.5). Any ideas? Please?

*****FIXED*****
This is what I did to fix it. I am running Win7 so I don't know if it will work on Win 8 or not.
1-Uninstalled QuickTime
2-Uninstalled Apple Mobile Device Manager
3-Uninstalled Apple Software Update Manager
4-Uninstalled iTunes
5-Uninstalled iCloud
6-Uninstalled any left over Apple software
7-Restarted Computer
8-Installed iTunes
9-Restarted Computer
I did not install iCloud. I was able to authorize my PC and Sync did work.

Updated Appleworks will not open/ updated documents won't open

Am so frustrated! Knew my G4 was almost out of memory. Was at the Apple Store today and bought a LaCie 500GB hard drive AND a new MacBook Pro notebook. Before transferring files to the new computer, Apple told me to "save" my desktop documents on the new hard drive. Worked OK until I got to Appleworks and all my cwk files. The Appleworks icon now shows a blue label under it (huh?) and a small arrow and will not open. Hundreds of documents done on the Appleworks updated (6.2) software I can't open or transfer. Only thing that I am able to open are old documents from my original Appleworks.
Is there any way to get the Appleworks 6.2 open? and moved to the new hard drive? I'm an artist working from home... need these documents! Do I have to schlep the old computer, the new computer and the new hard drive back to the Apple store tomorrow? Help would be much appreciated! Thank you!

Hi Lani,
Welcome to Apple Discussions and the AppleWorks forum.
I don't know what the blue label under the AppleWorks icon means. Is this the Application icon or the icon for an AppleWorks document? The small arrow, if it is curved and located at the lower left corner of the icon, means the icon is an alias to the file.
If your AppleWorks application is indeed version 6.2, you'll need to update further. AppleWorks 6.2.4 is the earliest recommended version for current Mac OS X systems (Tiger & Leopard), and the newest (and also recommended) version is 6.2.9.
The following actions should help in solving your problem.
1. Locate the AppleWorks 6 application package. It should be at Applications > AppleWorks 6 > AppleWorks. Click on it once to select it, then press command-I to Get Info. In the Get Info window, check the Version number. If it is anything other than 6.2.4 or 6.2.9, download and apply the 6.2.9 update. (See the Caution below.) If the AppleWorks 6 folder (containing the application) is not in the Applications folder, move it to that folder. If the Appleworks application package is not in the AppleWorks 6 folder, move it to that folder.
2. After any software installation it is necessary to do a system maintenance task—Repair Permissions. Use Spotlight to locate Disk Utility and double click the file to launch the application. In Disk Utility, click First Aid, Select your hard drive, then click Repair Permissions.
3. Whenever Appleworks is misbehaving an early troubleshooting action is to delete AW's preferences files. This is especially true if you have moved AppleWorks from one machine to another. Look in Home (yourname) > Library > Preferences. Find and delete the file com.apple.appleworks.plist. Find and open the folder AppleWorks. Delete both prefs files and both cache files found in this folder.
4. Click on one of the AppleWorks file icons with the arrow and blue label, then press command-I. In the Get Info window, check if this icon is a file (document) or an alias. If it is a document, you should be able to open it. Check that the Open with section of the Get Info window names AppleWorks 6 as the application to open the file. If not, use the pull down menu in this section to select AppleWorks 6, then click the Change all button to apply this instruction to all .cwk files. If the icon is an alias, you will need to redo the transfer of files from the G4 to the MBP, making sure that what you are transferring are actual files, not aliases.
Still not solved? Re post with more detail on what you do to open the files, and what response you get from the MBP.
Regards,
Barry

Pdf files will not open upon downloading

I download a lot of pdf docs for work and want them to open automatically upon download so I can screen them. Since upgrading to Safari 5.1, when I download files (which has gotten much more cumbersome) they do not automatically open upon download. Yes, I DO have the "open safe files after downloading" option checked in Preferences. Any other thoughts? A solution would be most helpful. (If anyone has a solution to how I can automatically download files as easily as in prior versions, that would be greatly appreciated also.)

E Denice wrote:
PDF files will not open and eratically opens multiple pages and then the laptop freezes up.
Doesn't make much sense to me. Methinks details are needed.

Adobe reader will not open after download

Please help. I have downloaded the newest version of reader and It will not open up; it says I must agree to agreement. there is no agreement.

You downloaded it but, did you install it?
If in Windows, you can try using Windows Explorer to navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement.

Pages will not open a downloaded .pages document from iCloud because index.xml file not found?

New to using iCloud. I created a large pages document on Mac Air and saved it to my iCloud account. Found it at home on desktop Mac and downloaded it. No problem. However, it will not open due to the index.xml file not being found. What should I do to open this document? I've tried several things and no luck yet. Thanks for any tips! :-)

Options posted here: The required index.xml file is missing.
William Farrar posted:
Try this. It worked for me:
1. Single click on the document. This will "highlight" the document icon, but not invoke the error message.
2. Click on "File" in the menu.
3. Scroll down to "Open With".
4. One of my choices in the "Open With" selection is Pages (default) (5.0.1)
5. Click on that choice and the document should open.
In my "Open WIth" selection there is also a Pages (4.0.4), but that didn't work for me.
Now, here is a caveat. If before you open your document you instead first click on an open Internet window, then the "Open With" selection disappears from the File menu. In that case just single click again on the document icon again and the "Open With" selection returns.
fruhulda posted:
Try this:
1. Make a duplicate of the file (cmd D), just to be safe
2. Select .pages on the copy and change to .zip
3. When the System asks if you really want to do this, click Use .zip
4. Double click the new .zip file
5. It will now appear as a folder with no extension
6. Append .pages to the end of the folder name
7. Again click on Use .pages
8. Double click on this file to open it in Pages.
What you have done is extracted all the Pages resources from the .pages "package" and reconstructed it.
or
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=308

Ipad will not open any downloaded apps

My ipad will not open any apps that I downloaded. How do I fix this?

If they are crashing - try downloading another app - any free app is fine.
If they will not open at all when you tap on the icons - try restarting or resetting the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Safari will not open or download pdf files from web?

Safari will not open or downlaod pdf files from web? IS there a setting, or something else to do this?

Open browser preferences
ex Safari>Preferences>Extentions and un-enable any ext that mabe interferring , ex divX
or open Help> installed Plug-ins and remove Adobe Acrobat.
if still a problem
Quit Safari.
In the Finder, select Go ▹ Go to Folder from the menu bar, copy the text on the line below into the box that opens, and press return:
~/Library/Preferences/com.apple.Safari.plist
A Finder window will open with an item selected. Move the selected item to the Desktop, leaving the window open.
Launch Safari and test. Its settings will have reverted to what they were they first time you launched it. If it works as expected, recreate the settings and delete the item you moved to the Desktop. Otherwise, quit Safari again and put the file you moved back where it was, overwriting the newer one created in its place.

FF4 will not open after download... "you can't open the application "firfox" because it is not supported on this application." If 4 doesn't work on OS 10.5.8, then how do I get the old firfox back?

I downloaded the FF4 update and it has the "no smoking" symbol over the FF icon. When you attempt to open the app it states: "you can't open the application "firfox" because it is not supported on this application."
I have OS 10.5.8
If it will not work, how do I get the old version of FF back?

Are you sure you downloaded the .dmg file? It should have automounted for you and opened in finder. Then all you have to do is drag the FF4 icon over the Applications link in that finder window and it will install.
I seem to recall seeing the error you noted when I accidentally clicked a windows .exe file on my Mac.
Also, if you visit firefox.com from your Mac, it should be prompting you to download the .dmg anyway. The only way you could get the .exe would be to click the "other operating systems" link below the main download button.

Applework will not open, printer error

When I try to open Appleworks, I get the following error. "AppleWorks could not be launched because of a shared library error "<Appleworks><CarbonLib><CFMPriv_PrintCores>"" This error just happened without making any adjustments to the computer. Prior to this error, the application (Safari, Appleworks, etc.) would unexpectedly quit when you tried to print. That problem also remains. I have an EPSON CX4200 that I bought with the computer.
Any suggestions would be great.

2. Trash the AppleWorks folder in your Home -> Library -> Preferences folder along with the com.apple.plist file. (Don't trash the Button Bar Preferences if you have customized the Button Bar.)
I suspect you have reached the system's preferences folder rather than your own. OS X maintains a set of preferences for its own use, and a set for each User account.
In the Finder (and with AppleWorks NOT running), open a new finder window (command-N), then:
•Click the Home icon with your name beside it.
•Click the Library folder in the list that apears in the next column.
•Click the Preferences folder that appears in the next column.
•Drag the AppleWorks folder in the next column to the Trash.*
•Drag the com,apple.appleworks.plist file in this column to the Trash
*See note above regarding Button Bar preferences.
3. Use the first aid utility to repair permissions on your hard drive (it's recommended that you run this more than once.
The 'first aid utility' is called Disk Utility. You'll find it in Applications > Utilities > Disk Utility, but it's probably easier to click the blue Spotlight icon at the right end of the menu bar, then type in "disk utility" (without the quotes). Double click the icon (it will show as the Top Hit) to run the utility, then click the First Aid button in the window that opens, then Repair Permission in the next window. As noted in the User Tips post, it's recommended that Repair Permissions be run more than once (until it reports that Permissions are OK or that no permissions were repaired).
Regards,
Barry

Organizer will not open after downloading, but Editor will

When I downloaded the trial and after purchasing the product, Organizer will not work properly. I cannot open it at all; however, Editor opens and works just fine. My Mac is completely up to date and I'm not sure what else I can do.

Bypass the Unwelcome Screen by creating Desktop shortcuts for the Organizer and the Editor, and restarting your computer.
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
The Unwelcome Screen leaves a zombie process running which prevents the actual program from launching again.
Ken

Why my I Books will not open a downloaded book?

Downloaded a book from the apple store into iBooks.
I can see the book and it said it is downloaded but can not open it.
Operating system 7.0.

Close iBooks, reboot the iPad and try again.
Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the iBooks app then swipe "up" on the app preview thumbnail to close it.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, delete the book and download it again. In the iBooks app, tap the edit button, select the book by tapping on it, then tap Delete in the upper left corner. Go back and download the book again. You will not be charged for the download as long as you use the same Apple ID.

My safari will not open after downloading librooksbas.dylib plug in. message that is displayed when i try and open is "safari quit unexpectedly while using the librooksbas.dylib plug in" i can either re-open or ok the error to which neither work :(

i have tried the terminal code thing where you enter certain words then press enter and it worked but as soon as i restarted it and opened safri the error message apperarewd again my software is OS X 10.9.1

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/$.*: $$.*$/ $\2$/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l | sed 's:/Users/[^/]*/:/Users/USER/:g'); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Adobe will not open my download

a message appears stating adobe is unable to open the download citing that adobe is either not compatible or a defect occured - i ran the adobe test run downloads - same problem - i re-installed the program-same result [email removed]

Hi[?] Adobe Digital Editions 2 Windows 7
Adobe message : Adobe Reader could not open " Secret Father a Novel
19780547526836.ACSM " because it is either not a supported file type or
because the file has been damaged [ for example, it was sent as a email
attachment and wasn't correctly coded. This problem has occurred on all my
attempts to download various files and lists from my regional Library and
freeDictionary ect. Thanks

Appleworks will not open on download

Similar Messages

Maybe you are looking for