Appleworks won't start - wheel just keeps spinning

Recently, my Appleworks app won't work. AFter I double click, it quickly shows credit screen, and then gets stuck on Starting Points screen. None of the starting points show up and the wheel just keeps spinning and spinning...I can't open any of my hundreds of docs - help!
iBook Mac OS X (10.3.9) Superdrive

You have run into the most complained about bug in AppleWorks 6 - known as the "Recent Items bug" - & has been around since AppleWorks 6 was released in March, 2000. There are three user tips in the User Tips Library dealing with Recent Items., the first two by Dale Gillard & the third by Yvan Koenig
AppleWorks slow? Spinning ball appears?
Recent items not visible/updated
No More Recent Items

Similar Messages

IPad 1 won't boot - wheel just keeps spinning

After working perfectly for six months, suddenly my original iPad when starting up just stuck at wheel on screen. Been spinning for hours-can't turn off or do anything. Have had every configuration of Mac's for last 13 years currently have 3 iPads, Mac Book Pro 17" and Mac Book 15"- cluless as to what to do with this. Is that a reset port by the head phones jack? Thanks in advance for any help.

Time to restore your iPad.
Tunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
If for some reasons you are unable to restore the iPad...
iPad: Unable to update or restore

My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not workin

My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Setting>:General>Reset>Reset Network Settings.
- iOS: Troubleshooting Wi-Fi networks and connections

HT1551 When I try to access Apple TV it says it is setting date and time.... And the wheel just keeps spinning??? It worked fine prior to now.

When I try to access Apple TV it says it is setting date and time.... And the wheel just keeps spinning??? It worked fine prior to now.

Were any of the troubleshooting steps in the article from which the question was posted tried?

AOL mail not updating. Spinning wheel just keep spinning. It hasn't updated in 5 days. I can use the AOL web site and access it on my android phone, but not on my MacBook Pro. OS 10.6.8

AOL mail not updating. Spinning wheel just keeps spinning. It hasn't updated in 5 days. G-mail updates normally. I can use the AOL web site and access it on my android phone too, but not on my MacBook Pro. OS 10.6.8

Hello robe427,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you are unable to receive email from one of your accounts, please follow the steps in the article linked to below.
Mac Basics: Use Mail on your Mac
Take care,
Alex H.

Iphoto will not open . Wheel just keeps spinning and spinning. Cannot reboot

My IPHOTO app will not open on my computer. When I open the app the wheel just keeps spinning . If I try to upload a picture from my library to facebook it tells me I need to upgrade to IPHOTO 5 or above.but then my computer tells me there are no upgrades needed for my computer. What is the issue here ? My photos just never appear. Only the little wheel spinning

what version of iphoto do have? Of the OS?
If iPhoto will not quit you can force quit - Apple menu ==> force quit
You can try to Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - from the resulting first aid window repair permissions and if necessary rebuild your database
LN

On start-up macbook chimes, grey apple but spinning wheel just keeps spinning and spinning and...

So my Black Intel Macbook running Leopard was acting a bit funny. So I shut it down and tried to re-start it but after it chimes and shows the grey apple and spinning wheel.... it just keeps spinning and spinning. I shut it down and tried pressing the power button and immediately held down the Command (x), Option, P, and R keys simultaneously until hering the startup sound a second time (re-setting the PRAM). I get the same resultsd. Does anyone know what I should try next?

Reinstall OS X:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

MacBook won't boot up, just keeps spinning

My daughter's MacBook (less than a year old) wont boot up, she states that it just keeps "spinning". Any suggestions out there?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

When I log off, there is always an update waiting to be installed but the wheel just keeps spinning and nothing happens .

For the past two weeks, whenever I've logged off there has always been one update waiting to be installed. I found this curious, so last night I waited to see what would happen. The wheel just kept spinning and spinning--and pretty obviously the update was not installed. And now the update is still waiting to be installed. (Only in the last instance, when I was checking to see what happened, did I power off the computer. In all the previous instances, I found the computer OFF when I checked the following morning. However, the update had obviously not been installed.) How do I solve this problem? Thanks.

That is the security software. This is what I posted at Microsoft;
=============================================
I had an issue with my Win 7 Microsoft Security Essentials. Windows update
would download the upgrade, but the upgrade could not install. After many
hours of searching help sites and web search engines, I finally found out
what the problem was. Somehow, Windows lost the install information
file. And without those files.......<br>
Go to
'''''[http://support.microsoft.com/mats/Program_Install_and_Uninstall Fix problems that programs cannot be installed or uninstalled]'''''
and check it out. I ended up using the Fix-It program to manually remove
two programs called Microsoft Security Client. Don't forget to first download
the current Microsoft Security Essentials first.

HT202157 Apple TV says it is updating date and time after a power outage here. But nothing happens. The wheel just keeps spinning. What do I do to be able to use my apple tv?

Apple TV says it is updating date and time after a power outage. But the wheel just spins and nothing happens.. The software is updated and my wifi router is on and working fine and recognized by the Apple TV. How do I get Apple TV to work again?

Thanks for the tip. Unfortunately "Restart" did not change the situation. I then used the "Restore" option. After about 45 minutes of the unit going through the process, Apple TV was up and running again.

My macbook pro frooze, "spinning wheel of death", I tried to force quit. When that failed I held down the power button. Now I can't get by the white apple start up screen, the wheel just keeps spinning and nothing will happen...HELP!

Again,
My macbook pro just frooze while on-line. I got the rainbow wheel spinnin and it wouldn't stop I tried to do a force quit and I was unable to do that. So I held down the power button. Now when I try to restart it I can't get by the while page with the apple symbol on it. All I have is the grey circle spinning continuosly like it is working. I tried a command S when I started it back up and checked the HD and rebooted, still can't get by the startup page. Any suggestions?

I'm having the same problem. I started an automatic upgrade that then got "stuck" for hours. I did a hard shut down and now all I get when I try to reboot is the spinning wheel. I haven't done a backup in 3 months and can't afford to lose everything in a reinstall. Any suggestions?

The color wheel just keeps spinning and won't allow me to put in my computer password to install a printer driver. How do I stop the rainbow wheel and keep going?

Why is the rainbow color wheel spinning as I try to install a downloaded printer driver? It won't even let me put in the computer password to begin the install. Help!

Disconnect the printer. Restart your Mac.
Then try downloading the drivers.
If that doesn't help, exactly which printer drivers are you trying to download and from where?

MacBook 10.6.7 intel won't open. Gear-looking wheel just keeps spinning

Shut down computer last night because after restarting it would not open.   A little gear-looking circle just spins round and round. Started up computer this morning and it's the same situation. . . . . .gear circle just spins around.    I know the battery is fully charged.
I'm using a different computer to write this.
Has anyone encountered this?    Any suggestions greatly appreciated.
Lee

Just a final post to this.   I talked with a tech friend this morning. He works with both Macs and PCs.   He asked if I had "zapped the RAM."    I'd read the term but did not how to do that.   Anyway, he gave instructions, I did that and no results.   It now looks probably that it is either a bad memory chip or, more likely, the hard drive may be shot.   So it is off to a ReMac place I trust to diagnose it correctly and fix it.
Many thanks for your help in sorting this out.
Pat

Mac book pro when turning on wheel just keeps spinning

Just did the updates requested a few days ago and now it will not complete the turn on process?? Please help

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Well I am trying to turn off my ipod touch 4g but the white wheel just keeps spinning?!?!?!

Well i have had my ipod touch 4g since june and once in a while i turn off my ipod...... but this time when i turned it off it usually just goes quick but this time it us taking at least hours!!!!! I AM DESPERATE FOR ANY HELP AT ALL!!! and all that is happening is a white spinning wheel that is just annoying me!!! HELP ME!!!!
And this never happened at all in the past!!

Start here:
iOS: Not responding or does not turn on
If not successful, let the battery fully drain, charge for an hour and then try again.,

Appleworks won't start - wheel just keeps spinning

Similar Messages

Maybe you are looking for