Appliance wise kuler?
Hi,
I have been surfing kuler from year last 4 years, my utility is to find website color schemes which I normally select by searching color or to navigate.
I use "Most Popular" or "Highest rated" but themes I find in these are not appropriate to website design, this just because appliances are different like Event Management, Webdesign, Video games, Visual Object design etc.
So I just wonder if there could be a category option and author could select option while creating these themes. Isn't it a good idea, or do you already have some provision within kuler.
However, whatever provided is nector not doubt.
Thanks for reading and many thanks if it is going to implement.
Regards
Jay Khatri
Grantfs- thanks for the suggestion. I've created an "idea" here.
Are you imaggining this would be a setting you would set one time (and tweak occasionally) or something you might want to play with each time you take a pic?
Similar Messages
-
Update issues when ESA Virtual replacing C170 Appliance in Cluster Config
I have opened a TAC ticket on this one but was curious if any others experienced the same issue.
I have C170s in Centralized ClusterConfig. I recently learned about the Virtual ESAs after reading about the EOL for C170s in a few years. I think the Virtual ESAs will add a lot of flexibility. The only issue I've noticed was trying to join Virtual ESAs to our Cluster are updates so far.
The first virtual ESA I brought up I was able to initially update it so it could join the cluster. I thought maybe I messed up the network config somewhere. So after messing with it over the Weekend and opening a TAC case with Cisco. I thought I would try configuring the second Virtual ESA. Sure enough updates are working, and no errors. Hooked it up enough to do some quick testing to make sure the listeners were working. Feeling pretty good about it, I join the cluster. Everything copied over configuration wise, I also setup a new ClusterGroup for the Virtual ESAs so I could customize the listeners and interfaces. Before I got too crazy I quickly realized that my updates stop working on the second virtual appliance.
So just curious if there are some configuration compatibility issues between appliance hardware and Virtual we should be aware of. I found some great information from the Forums about forcing updates and reading the tail of the updater_logs, which produced the following:
Info: Dynamic manifest fetch failure: Received invalid update manifest response
I found the fix for non-cluster configured Virtuals for this Update error:
http://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118065-maintainandoperate-esa-00.html
But this does not for for clusterconfig.
So is my best course of action to:
run the clusterconfig on one of my virtuals,
Remove Virtual from ClusterConfig after config is migrated
Apply CLI fix to point post-cluster config Virtual so it now points to the right update servers
Create new cluster with the now fully Updating Virtual-Uno ESA
Join Remaining virtuals to the newly created cluster and phase out the old physical cluster?
Obviously I left out all the fine details about MX records, IP addresses, Central Reporting and Spam and outbreak reporting. Just want to make sure I'm not missing something, maybe tare down the old clusterconfig first, set it to point to the update servers in the article above. Then I can phase out my old physicals later on down the line as they break down over time and avoid configuring two clusters for every rule change.So it looks like I have found the answer to my own question. Looks like the fix in the following article does apply to Virtual ESA in a cluster.
http://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118065-maintainandoperate-esa-00.html
Some things I'd like to figure out is, will this change stick, will new virtual nodes pick up the incorrect update URL when I join them to the cluster? I made the changes and all my hosts seem to be updating fine. Will wait and see how well they do over the next few days and let them bake in a little before I push e-mail through them.
Step by Step how it looks with a cluster config from the CLI:
(Machine esa1.yourcompany.com)> updateconfig
Service (images):
Update URL:
Feature Key updates
http://downloads.ironport.com/asyncos
RSA DLP Engine Updates
Cisco IronPort Servers
PXE Engine Updates
Cisco IronPort Servers
Sophos Anti-Virus definitions
Cisco IronPort Servers
IronPort Anti-Spam rules
Cisco IronPort Servers
Outbreak Filters rules
Cisco IronPort Servers
Timezone rules
Cisco IronPort Servers
Enrollment Client Updates (used to fetch certificates for URL Filtering)
Cisco IronPort Servers
Cisco IronPort AsyncOS upgrades
Cisco IronPort Servers
Service (list):
Update URL:
RSA DLP Engine Updates
Cisco IronPort Servers
PXE Engine Updates
Cisco IronPort Servers
Sophos Anti-Virus definitions
Cisco IronPort Servers
IronPort Anti-Spam rules
Cisco IronPort Servers
Outbreak Filters rules
Cisco IronPort Servers
Timezone rules
Cisco IronPort Servers
Enrollment Client Updates (used to fetch certificates for URL Filtering)
Cisco IronPort Servers
Service (list):
Update URL:
Cisco IronPort AsyncOS upgrades
Cisco IronPort Servers
Update interval: 5m
Proxy server: not enabled
HTTPS Proxy server: not enabled
Choose the operation you want to perform:
- SETUP - Edit update configuration.
- CLUSTERSET - Set how updates are configured in a cluster
- CLUSTERSHOW - Display how updates are configured in a cluster
[]>dynamichost
Enter new manifest hostname:port
[update-manifests.ironport.com:443]>update-manifests.sco.cisco.com:443
Choose the operation you want to perform:
- SETUP - Edit update configuration.
- CLUSTERSET - Set how updates are configured in a cluster
- CLUSTERSHOW - Display how updates are configured in a cluster
[]>
(Machine esa1.yourcompany.com)> commit -
Kuler iPhone app - White Balance
No way to set white-balance?
Kuler for iPhone is really a very nicely done app, but there is a fairly major issue for an app that is only about colour.
No white-balance setting. The iPhone's colours are often too blue. (Probably because Apple thinks it gives more 'punch' and they may be right, but it is not an accurate colour-wise).
As I use Kuler on the iPhone, I see that the colours on the iPhone screen are wildly too blue compared to what is in front of my eyes.
Can you please include the possibility to set Kuler's white-point (grey balance) in the next version?
(This seems like a big omission)Grantfs- thanks for the suggestion. I've created an "idea" here.
Are you imaggining this would be a setting you would set one time (and tweak occasionally) or something you might want to play with each time you take a pic? -
MB5B Report table for Open and Closing stock on date wise
Hi Frds,
I am trying get values of Open and Closing stock on date wise form the Table MARD and MBEW -Material Valuation but it does not match with MB5B reports,
Could anyone suggest correct table to fetch the values Open and Closing stock on date wise for MB5B reports.
Thanks
Mohan MHi,
Please check the below links...
Query for Opening And Closing Stock
Inventory Opening and Closing Stock
open stock and closing stock
Kuber -
Vendor open items wise ALV Grid Display (FBL1N) report to Excel Sheet
Hi All,
I need vendor wise open items and cleared items in ALV Grid format in excel sheet.
I'm Trying that in T Code FBL1N, After the execution. I had select ALV Grid format like this From the menu bar->Settings-> Switch list.
After that i get ALV Grid format, Then i'm doing export the data to excel sheet. like this From the Menu bar->List->Export->Spread sheet.
That time i'm getting Error Message no. 0K064, Filter criteria, sorting, totals and subtotals are not taken into account.
I want vendor wise sorting totals and subtotals,
How can i over come this Error please let me now.
Thanks,
AmarHi Amar,
Please check the KBA 2083705.
https://websmp230.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3230383337303526
Regards,
Monika -
Report for bom wise target and actual cost as well as qty at line item
Dear Experts,
Is there any standard tcode for bom wise target and actual cost as well as qty at line item level for the month.
there is one tcode s_alr_87013127 but user has to double click in order to get line item details.
I want to see line item wise breakup/bom wise target and cost cost as well as qty.
Thanks in advance.
regards
RKDear experts,
I am still looking for a revert.
regards
RK -
FAGL Table to fetch closing balances period wise
Dear Experts,
I want to fetch GL Closing balances period wise. I have checked GLT0, where no entry is recorded.
Further i have checked FAGLFLEXT, which does not support period wise closing balances.
I require GL closing balance, period wise, as shown in FS10N in FI.
My requirement is to display period wise closing balance, on GL, in the report.
Please suggest and advise.
Thanks in advance......AlokHi,
Debug the program RFGLBALANCE , the code and the logic used is easily understandable -
Invoice wise pending GR/IR report
hello ,
can anyone tell me how to find the invoice wise pending goor receipt and invoice receipt details ,
what tables contain that data.
i need to write the report on the basis of GL account,,posting date and document type .
thanksHi
Tables are
GoodsReceipt -
>MSEG or T663A
InvoiceReceipt -
>EKBE
Even you can see in BSEG
Regards
Venkat -
Open Items in GR/IR Account Internal Order wise
Hi,
Is it possible to view Open Items in GR/IR Account Internal Order wise?. We are assigning Internal Order in Goods Receipt and want to view Open items for the particular Order.
Regards,
AmanullahThanks for your response.
I already review the accounting and is pretty fine.
The system creates document type WE and RE for the Goods Receipt and Invoice Receipt.
Unfortunately in transaction FBLN the system shows as a Open Item, and honestly I don't know the reason.
I really appreciate any help for this issue.
Regards. -
Hi Experts,
We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
From Mb5b we canot get storage location wise report as we get only plant level qty and value.
Pl. guide us.
Regards,
YusufHi Yusuf,
Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
stock, value. if you double click the article you will get the details of storage location.
Hope it will be help for you
Regards
GK -
Stock on posting date -storage location and batch wise
Dear All
I need to developa report exactly same as MB5B but with storage location and batch wise.
We need storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
I have gone through some history tables like MCHBH and MBEWH.
But all the history tables are having fileds for period wise but not date wise.
Any focus on this?You have to read the coding of MB5B to see how SAP is doing it.
The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached. -
MB5B Report for Date Wise Stock and Value
Hi,
I am Taking MB5B Report for Date Wise Stock and Value.
But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
I have another Doubt in these report three Stock type indicaters are there like these.
1.Storage Location / Batch Stock
2.valuated Stock
3.Special Stock.
But i have one doubt what is defferent these
1.Storage Location / Batch Stock
2.valuated StockHi Prasad,
Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
Regards
Karthick -
Opening and closing Stock report at Storage location level- date wise
Dear all
Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
Thanks
SamDo I have the option of selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
pls gudie
sam -
Open Date-wise G/L selection
What is the table for selection of G/L Account line item for open items date-wise, I took BSIS table but when i select data for particular date(BUDAT) in my report the amount is mismatch to T_code(fbl3n).
If i want to select the back date data then defiantly that data was cleared as today date and will not found in BSIS table, so please can you help me how to get data for date-wise.
Coz my client want if he select the particular date then what ever unclear (open) item data as on selected date is display.
Thank's & Regard's
Atul Singh
Double-postHello,
Please check the following logic.
e.g.
Posting date : 01.08.2010
Clearing Date : > or = to 01.08.2010.
Put the above logic in the program, so that it'll fetch the open records which are on back date.
Rgds
Murali. N -
dear sir,
can i have the transaction code for stock on posting date GL wise.
IN MB5B THERE IN NO FIELD WITH GL AND IN MB5B THERE IS NO POSTING DATEHi,
There is a posting date in MB5B !!!!!!!!!!!!!!!!!
The whole point of MB5B is to give you the stock on a posting date.
The field is called "Selection date".
Steve B
Maybe you are looking for
-
Cannot download FB 4.7 trial
When I click on "try" link for Adobe Flash Builder 4.7 premium, I get to a empty page - In Chrome error message is: The webpage at https://creative.adobe.com/products/download/flash-buildermight be temporarily down or it may have moved perm
-
I just installed a QuickTime update and the alarm clock from iCal's alarm window is now the black box. This has happened before with a QuickTime update and it was fixed by enabling Flash: System Preferences->QuickTime->Advanced->check enable Flash bo
-
I have to log in every 5 minutes, what can i do to so this won't happen again
when i opened for example my hotmail account, when i left the account for a few minutes, i have to log in again. everytime this repeats. Also with other sites where i have to login. How can i get an other situation, so i would not login so often? Gr.
-
Lost music after updating how do i regain
Very new at this. Use ipod shuffle set up itunes all was good. Connected husbands ipod touch asked for updates, lost all the music can I get it back?
-
I need a new charger for for my 2009, 15 inch macbook. I do not know what what model it is or what kind of charger I need. I just need the part that attaches to the charger that goes in the wall. please help.