Applicant Activities

dear friends,
i have two applicant activities under one status i.e. Inprocess
1.Initial Entry of Basic Data
2. Call for Interview
when i execute Initial Entry of Basic Data at the end of process system should not generate any letter and when i execute Call for Interview at the end of process system should generate Call letter for interview.
at present my PACTV settings are like below:-
1 In process (to generate receipt of letter)
INDIC S
APACT 004
RECTK X
REFID X
IDTXT WW-CALL FOR INTERVIEW
earlier also i posted this.  but no inputs. if i am not clear with my question i am ready to elaborate
how to solve my problem. inputs plz.
regards

Hi,
Check the below format. i think this should work.
INDIC S
APACT 001
PLDAT 2
RECTK X
REFID X
IDTXT WW-call for interview
Correct me if i am worng.
Reward me if helps
Thanks,
Vasu.

Similar Messages

  • Unable to save Planned Activites created in Maintain Applicant Activites

    Hello to all SAP Experts,
    I am now trying out to Maintain Applicant Activities and create "Follow-up activies" for my particular applicant
    However i met this error when trying to save the planned activites:
    _Record 000000274003    00 201007192010071900020100719BT60 does not exist
    Message no. PG225_
    Please help me solve this issue please.
    Regards,
    Jenny

    Craete ur set type.
    Create Hierarchiy. Create category under that. Assign set type in the category.
    Assign Category Hierarchy to the application. This is also important step.
    But John generaly the std base hierarchy (SALE_PROD/BASE_PROD) is used , may be u can create the new category under that and can assign ur set type
    If does not solve. Pls send the detail screen print what u did in [email protected] It will be better to tell u what step u r missing.
    Thanks,
    Atin
    Reward points if it helps.

  • Applicant Activities unable to be maintained

    Hi Experts,
    While running Recruitment hiring action in PB40, Create Applicant Activities infotype comes as being not maintainable.
    The information regarding input of:
    Activity type
    Indicator compl./pl
    Performance date
    Room number
    Building number
    e.t.c
    is grayed out. is there a reason or a configuration step that needs to be done?
    Please advise.
    Regards.
    Edited by: Rana Bilal Khalid on Apr 7, 2010 4:47 PM

    I've also tried changing the operation from INS to MOD but no effect was seen.
    any other suggestions?
    Regards.

  • Applicant Activities Calendar

    Hi experts,
    Any idea about how to make create a kind of calendar with the applicant activities. Transaction PBA9 (Planed Activities) do not show the time of each activity.
    Do you know if it would be possible to create a bond between the Business Workplace Calendar and the Activities (using the responsible). Or any other idea?
    Thanks

    We've made a new development for the customer.
    Thanks.

  • Automatic creation of applicant activities

    Dear Experts,
    I have created application status and applicant activity type and also configured for automatic creation of applicant activity. But after performing applicant action automatic applicant activity is not reflecting.
    Did I miss any step.
    Help me to solve this issue.
    Regards,
    Goldy

    have u maintained the feature PACTV???

  • How to add letters  to applicant activities  in recruitment module

    Hi Experts,
    We have created letters in recruitment module through tcode So10
    Here im in confusion where shall we add these lettes in the module.
    We have to add for Acknoeledgement,invitation for interview,offer letter and  rejection letter.
    kindly advice.
    Vsai.

    Hi Vicky,
    You assign letters to activities by implementing feature PACTV.
    Please assign the standard text name to IDTXT field.
    Regards,
    Dilek

  • Recruitment - Problem in Applicant activities

    Hi Friends,
    In recruitment I uploaded all required data for applicants,but when I'm transporting data from recruitment to PA system throuing error applicant activity not found.
    But as I'm aware of that IT 4003 (Applicant activity) has to create by system. But I didn't find any activity(data) in the IT 4003.
    Hence,  what I have to do for create the same by system or else can we do manually any uploads or settings.
    If I missed any thing or need to do kindly let me know.
    Thanks in advance,
    $ Lakshmi

    Hi,
    Use the Tcode PBA7 for Hiring.
    Give the Action for hiring in the Selection screen of PBA7 and all the emplyee related data can be edited during hiring to PA (if wanted).
    Check the Documentation of PBA7 in the selection screen.
    Hope this helps you.
    Regards,
    Subbu.

  • Rejection Applicant: How to add plain text to the mail E Mail Letter?

    Dear All:
    I'm working with a ECC6 version.
    In transaction PB60, when we do the candidate rejection activity, the E Mail letter generates a mail with empty body text, and an attachment with the letter in PDF format. The letter is OK, but I would like to know how to add some plain text to this E Mail letter. An empty mail is not a good practise.
    I searched across the forums and SAP documentation, but I could not find any clue.
    I would appreciate any help regarding to this matter.
    Best regards
    Jordi

    Here you go !  ( you need to create Text in t-code SO10 for ID = PAML " )
    Two Default texts under  ID = PAML :
    *MAIL-APP-INTERVIEW     *EN     TEXT     PAML     SYSTEM
    MAIL-APPLICANT     EN     TEXT     PAML     SYSTEM
      Personnel Management->Applicant Activities->Mail Connection ->Create standard texts for mail connection
    Create standard texts for mail connection
    In this step you can create the standard texts to be used in mails.
    Example
    u2022     Request for return of applicant file
    u2022     Notification of date of job interview
    Requirements
    u2022     You should have assigned a standard text to the activity.
    u2022     You should also have set the variables which are to be used.
    u2022     Finally, you should also have made the settings for supplying the variable with values.
    Standard settings
    The standard system contains two examples of standard texts. You can use these examples as references to help you create your own standard texts. The standard texts have the following names:
    u2022     MAIL-APPLICANT (note on an applicant activity)
    u2022     MAIL-APP-INTERVIEW (note on appointment for interview)
    Please note that the standard texts are stored under text ID PAML.
    Activities
    Now create the standard texts you require under text ID PAML.
    Further notes
    Every mail is made up of a heading and contents. In the first line of the standard text you enter the heading of the mail and from the second line on, the contents.
    The standard default settings for style and layout are used for mails.
    The SAP System treats standard texts as application data. This is why there is no automatic connection to the transport system. If you want to copy texts from one client to another within the same system, please use the functions of the transaction to create the texts. If you want to send the texts to a different system, please enter the transport manually as follows:
    PgmID   Obj     Objectname
    R3TR    TEXT   TEXT,XYZ,PAML,E
                     |    |   |   --- Language (e.g. E for English)
                     |    |   -
    Text ID (e.g. PAML for standard mails)
                     |    -
    Text name (probably not XYZ)
    Text object (TEXT ist fixed)
    Good luck
    Saquib Khan

  • Define an applicant activity in SPRO

    Hi All,
    Can anyone please advise if we can delete the existing (standard) applicant activities in SPRO and modify the existing one ?
    e.g. After we do initial data entry action in PB40, the planned activity: WW-RECEIPT automatically gets created. It has been defined in SPRO - Personnel Management -Recruitment -Applicant Selection -Applicant activities - Applicant activity types - Change automatic creation of applicant activities.
    Feature PACTV is maintained.
    Please advise.

    Hi,
    indeed the automatic creation of Activities is defined in PACTV.
    You can delete the node "1 In process" and no activity will be generated.
    Alternatively, you can bring the Activity in the foreground (INDIC A instead of INDIC S) so the user can choose whether to save it or not.

  • Recruitment : Create planned activities automatically

    Hi all,
    I want to create activity  Confirmation of receipt after carry out action "Initial entry of basic data" automatically. I configured on the  path : (SPRO -> Personnel Management -> Recruitment ->Applicant Selection -> Change automatic creation of applicant activities )
    Finally, no activity appeared in PB60.
    I don't know which steps I need more for this purpose
    Please help me.
    Best Regards,
    Sushi_Intel

    Thanks all,
    I realized that I need configure dynamic action and feature PACTV . because I define new actions, new activity , my define are not suitable with Sap  configuration.
    Now, I sound out my solution.
    Best regards,
    Sushi-Intel

  • Employee and applicant infotype

    HI all,
    I need to know the concept of employee and applicant master data.
    Also, the difference between employee and applicant infotype?.
    Regards,
    Shanthi

    Hi,
    Find below characteristics of few applicant infotypes.
    1. IT4000(Applicant action):-The Applicant Actions infotype (4000) serves as a record of all applicant actions carried out for an applicant. These applicant actions can be:
    Data entry procedures (e.g. Initial entry of basic data, Enter additional data )
    Procedures that change the overall status of the applicant (e.g. Reject applicant, Put applicant on hold)
    The time constraint for this infotype is 1.
    2. IT4001(Applications):- The Applications infotype (4001) is used to store information on whether an application was made in response to an advertisement, or is an unsolicited application.
    The time constraint for this infotype is 3.
    3. IT4002 (Vacancy Assignment):-You can assign the applicant to a vacancy. The applicant will then be included in the selection procedure for this vacancy. The applicantu2019s vacancy assignment status shows where the applicant is in the selection procedure.
    The time constraint for this infotype is 2.
    4. IT4003 (Applicant Activities):- Applicant activities are administrative stages through which an applicant passes during the course of the application procedure. Correspondence with applicants is also handled by means of applicant activities.
    The time constraint for this infotype is 3.
    5. IT4004 (Status of Applicant Activity):-The Status of Applicant Activity (4004) infotype is a technical infotype that stores the status of the activities you have performed for the applicant.
    6. IT4005 (Applicantu2019s Personnel Number):-The system enters this number automatically in the corresponding Applicantu2019s Personnel Number infotype (4005) for all internal applicants. This means that it contains a data record for each internal applicant.
    The time constraint for this infotype is B.
    7. IT0139 (Employeeu2019s Applicant Number):- This infotype can be used for following purposes.
    An external applicant enters the company as an employee.
    The internal applicant who is already a company employee occupies the vacant position
    I think it will help you.
    Regards,
    Purnima

  • ReG  Applicant activity Maintainance

    Hi guys,
    Plz help me in maintaing the applicant activities for an applicant in recruitment component.
    When I am trying to maintain it s giving the error as
    "Record 000000064003    00 200810232008102300020081023ARUN does not exist".
    It is not givina any technical details like table , view name where the record gets inserted.
    Regards,

    I have maintained an internal applicant(employee) with the details for a particular vacancy
    Now I  have to assign the planned activity (interview call) for dat internal applicant.
    so the error is comming when Iam maintaing the planned activity.
    The error is not comming if I perform the activity for external applicant.
    Regards,

  • Bapi to extract applicant data from SAP

    Hi folks,
    I need some help to extract the applicant data from the SAP system.  I do know that there is an FM HR_GET_APPLICANT_DATA that gives the name, address, ethnic origin, qualifications. edcuation. It is insufficient. I need to have fetch the information from PB4002, PB4001 (the number of requisitions applied for, applicant activities) . How can I do it?
    Besides this a FM, I need a bapi because we have to output the data on a web application. Can anyone help me here how to get the complete data? The version is SAP 4.6C
    Any help is widely appreciated. Thanks in advance,
    VG

    I got it.
    VG

  • Recruitment: Send email to applicant automatically through App.Activity

    Dear friend.
    I want to send internet email to applicant automatically through app.activity
    This meean that I want to invite applicant to our interview. After carrying out action 'Interview Applicant', an activity is created automatically and send to applicant .
    I don't know how to do this.
    Please help me.
    Thanks so much
    Best regards,
    Sushi_Intel

    HI
    In  PB60 - Maintain Applicant Activities we have make the necessary changes and also you have to create RFC for sending a mail to the applicant . Connect the basis team for the same.
    and Please find the T-codes hope it helps you.
    PB00   Recruitment
    PB04   NumberRangeMaintenance: RP_PAPL
    PB10   Init.entry of applicant master data
    PB20   Display applicant master data
    PB30   Maintain applicant master data
    PB40   Applicant actions
    PB50   Display Applicant Activities
    PB60   Maintain Applicant Activities
    PB80   Evaluate vacancies
    PBA0   Evaluate advertisements
    PBA1   Applicant index
    PBA2   List of applications
    PBA3   Applicant vacancy assignment list
    PBA4   Receipt of application
    PBA5   Recurring tasks: Print letters
    PBA6   Recurring tasks: Print letters
    PBA7   Recurring tasks: Data transfer
    PBA8   Recurring tasks: Transfer data
    PBA9   List of planned actions
    PBAA  Evaluate recruitment instrument
    PBAB  Maintain vacancy assignments
    PBAC  Applicant statistics
    PBAD  Recurring tasks: Print letters
    PBAE  Applicant pool
    PBAF  Vacancy assignment list
    PBAG  Screening
    PBAH  Decision
    PBAI   All applicants via qualifications
    PBAJ   Recruitment info system
    PBAK  Recurring Tasks: Print Labels
    PBAL  Bulk processing
    PBAM             Variable Applicant List
    PBAN  Ad Hoc Query
    PBAO  ABAP Query
    PBAP  Internal Applicants Via Quals
    PBAQ  External Applicants Via Quals
    PBAT  Choose SAPscript or WinWord
    PBAU  Maintain T750C
    PBAV  Display T750C
    PBAW             Maintain T750B
    PBAX  Display T750B
    PBAY  Maintain T750X
    PBAZ  Display T750X
    PBCX  Cust. Account Assign. Reference (MM)
    PBCY  Cust. Account Assign. Reference (FX)
    PBCZ  Cust. Account Assign. Reference (DE)
    PBW1  CareerCenter
    PBW2  Career Center: Status tracking
    PBWW            Customizing standard text in WinWord

  • How to configure mail connection

    Dear Experts,
    I received an application and I want to set a automatic email system to send feedback to applicant . When I create a planned activity that its type is 001 (mail confirmation of receipt). Then I click on Email-letter button, an error "No entry made for type of communication" appeared. I created 1 entry (is email address) in infotype 0105 (Comunication) for this applicant.I have adready set Mail Connection (through IMG->..->Recruitment...->Applicant Activities-> Mail Connection).
    Can You tell me Where are my mistakes and the rule to run an automatic email system.
    Thanks for your help
    Best regards,
    Edited by: Sushi300509 on Oct 27, 2009 4:23 AM

    Does it matter if I have to access the OWA url using a trailing folder name? I access OWA like so, https://owa.example.com/owa, I know it's a bit redundant, but I don't know how to make mail aware of that, or even if it's a problem? If I leave off the URL I can connect but not authenticate, with the URL it's obviously an invalid hostname. Anyone familiar with this issue?

Maybe you are looking for

  • Keeps telling me that I have an invalid Serial Number during update

    Trying to update and download Acrobat 8.0 to 8.1.0 and keeps telling me have invalid serial number when software is active and working on my computer.

  • Playbook Blackberry bridge to browse photos on bb phone

    I did update 2.1 for the Playbook. I always use Playbook and Blackberry Bridge to show my clients photos I have on the phone . Now the system is more complicated because to see the next picture I have to turn off the remote control and then click aga

  • Where can I download Photoshop Elements 11?

    How can i download a previously purchased copy of elements 11 for windows on to my Mac?

  • Help with multi-thread bash script

    Hi, I would like to simultaneously copy photo files from a memory card (in a card reader) both to internal HDD and external USB HDD, using rsync, in a *single* run (instead of running 2 rsync processes and read the same large data twice). It's a sing

  • Could not read detail log begebhby.anf

    Hello, I am not able to see the logs of db12, backup and archives. I can see that the permissions are not avaiable in /oracle/SID/sapbackup/begebhby.anf Rest everything seems fine.  Permissions for /oracle/SID/sapbackup and /oracle/SID/saparch is fin